Special Repairs to Sump in Mounted Police Line & Various Sump (Sump of Marutinagar Qtr., Sump Behind Block No. B-42, Sump of B- 1 to 4 near MT Section, Sump of B-1 to 15 & Sump of C-36)In PHQ at Rajkot City (Including Electrification work) (SBD)(3rd Attempt)

Name of Work :- Special Repairs to Sump in Mounted Police Line & Various Sump (Sump of Maruti nagar Qtr., Sump Behind Block

No. B-42, Sump of B- 1 to 4 near MT Section, Sump of B-1 to 15 & Sump of C-36 ) In PHQ at Rajkot City (Including Electrification

Statement showing the approximate quantities for the items of the above work to be carried out and

Cost put to Tender for Rs.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(A) CIVIL WORK:

Demolition including stacking of serviceable materials and disposal of unserviceable Rupees One Thousand

1 materials with all lead and lift. (i) R.C.C.work 19.00 Cum 1152.12 One Hundred Fifty Two

and Paisa Twelve Only

Demolition of Brick work and stone masonry including stacking of serviceable materilas Rupees Five Hundred

2 and disposal of unserviceable materials with all lead and lift. (ii) In Cement Mortar. 12.00 Cum 596.58 Ninety Six and Paisa Fifty

Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C

member including stacking of serviceable material and disposal of unserviceable from Rupees Twenty One and

Paisa Thirty Two Only

site of work with all lead and lift.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas Rupees Fifty One and

and disposal of unserviceable materials with all lead and lift. Paisa Ninety Eight Only

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats Rupees Two Hundred

5 architraves, holdfasts and other attachment etc. complete and stacking them within all 24.00 No. 204.44 Four and Paisa Fourty Four

lead and lift.(i) Not exceeding 3 Sq.M. in area. Only

Providing and laying cement concrete 1:2:4 ( 1 cement ; 2 coarse sand; 4 M/C stone Rupees Three Thousand

aggregates 40mm nominal size) and curing complete excluding cost of form work in Seven Hundred Thirty Four

Foundation and Plinth. and Paisa Seventy Eight

Providing and laying controlled cement concrete M - 250 including finishing smooth with

curing etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish

And Proping Must Be Of Steel Only So As To Give A Fair Finis Of Plywood Only With Fair Rupees Seven Thousand

7 Finish And Proping Must Be Of Steel Only So As To Give A Fair Finish but excluding cost 14.00 Cum 7735.86 Seven Hundred Thirty Five

of reinforcement Rate also inclusive of providing & mixing of plasticiser as per approved and Paisa Eighty Six Only

make in propotion as per mix design for R.C.C. work in Slab of thickness 13 CM to

CM for Ground Floor.

Providing and laying controlled cement concrete M - 250 including finishing smooth with

curing etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish Rupees Nine Thousand

And Proping Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of Two Hundred Twenty

reinforcement Rate also inclusive of providing & mixing of plasticiseras per approved Three and Paisa Seventy

make in propotion as per mix design for R.C.C. work in Beam having any corss section Nine Only

area of BEAM for Ground Floor.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and laying controlled cement concrete M - 250 including finishing smoothwith

curing etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish Rupees Eight Thousand

And Proping Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of Nine Hundred Twenty Five

reinforcement Rate also inclusive of providing & mixing of plasticiseras per approved and Paisa Twenty Seven

make in propotion as per mix design for R.C.C. work in Lintel for Ground Floor. Only

Provinding and Laying controlled cement concrete M-250 for reinforced conerete

CHHAJJAS Not exceeding 10cm thickness up to floor two level including finishing the

exposed surface with cement mortar 1:3 ( 1 cement : 3 fine sand) to give a smooth

surface ,centering and formwork and curing complete. Including the Cost Of Form Work Rupees Nine Thousand

10 Of Plywood Only With Fair Finish And Proping Must Be Of Steel Only So As To Give A 0.50 Cum 9929.70 Nine Hundred Twenty Nine

and Paisa Seventy Only

Fair Finish excluding cost of reinforcement for ALL FLOOR. Rate also inclusive of

providing & mixing of plasticiser as per approved make in propotion as per mix design.

Providing TMT Bars Fe-500/550 reinforcement for RCC work including cutting, bending,

binding and placing in position etc.complete for all floors.(Brand As Approved By GSPHC) Rupees Seventy Six and

Paisa Fifty Two Only

BRICK WORK using common burnt clay building bricks having crushing strength not less

Rupees Four Thousand Six

than 35 Kg./Sq cm. In super structure above plinth level upto floor two level. Conventional

12 15.00 Cum 4602.07 Hundred Two and Paisa

bricks in cement moratar 1 : 6 ( 1 cement : 6 coarse sand) for Ground FLOOR

Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering Rupees Two Hundred

13 and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a 128.00 Sqm 220.40 Twenty and Paisa Fourty

floating coat of neat cement slurry at GROUND FLOOR. Only

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for Rupees Two Hundred

14 interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) 741.00 Sqm 220.04 Twenty and Paisa Four

including finishing with floating coat of neat cement slurry at GROUND FLOOR. Only

Providing 20mm thick SAND FACED cement plaster on walls above ground level Rupees Three Hundred

15 consisting 12mm thick backing coat of C:M 1:3 (1 cement; 3 sand) and 8mm thick 495.00 Sqm 329.18 Twenty Nine and Paisa

finishing coat of C:M 1:1 (1 cement; 1 sand) etc. complete for any height. Eighteen Only

Provinding 10mm thick cement PLASTER in single coat of interior plastering and

finished even and smooth in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing with Rupees Two Hundred

16 floating coat of neat cement slurry including providing and mixing with WATER 248.00 Sqm 201.19 One and Paisa Nineteen

PROFFING material. For All Floors.

Provinding CEMENT VATA (10cm x 10cm) size quarter round in cement mortar (1 : 1) Rupees Twenty Four and

including neat cement finishing, watering etc. Complete. Paisa Four Only

Providing and laying 25mm thick Mirror polished ( Dimond Cut) POLISHED KOTAH

Rupees One Thousand

STONE FLOORING and Tread of Steps over 20mm average thick base of cement mortar

18 75.00 Sqm 1108.30 One Hundred Eight and

1:6(1 cement; 6 coarse sand) over and jointed with grey cement slurry including rubbing Paisa Thirty Only

and polishing etc. complete for All floors.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and laying 25mm thick Rough KOTAH STONE SLAB FLOORING over 20mm

Rupees Seven Hundred

average thick base of cement mortar 1:6(1 cement; 6 coarse sand) over and jointed with

19 113.00 Sqm 732.44 Thirty Two and Paisa

grey cement slurry including rubbing and polishing etc. complete for All floors. Fourty Four Only

Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm thick for jambs and

sills of doors & windows using neat cement slurry laid over 20 mm average base of

cement mortar 1:1(1 cement:1 Coarse Sand) and jointed with grey cement slurry Rupees Two Thousand

20 including racking(Tancha Work) rubbing and polishing,scaffoldings,tools and 15.00 Sqm 2428.00 Four Hundred Twenty Eight

tackles,scaffolding etc. complete(with base of neat cement) as per direction of Engineer

in charge including rounding the exposed edges as directed.

Providing and laying integrated cement based proprietary water proofing treatment of

required thickness over the roof including Providing and applying two coat of Acrylic

polymer of approved brand and manufactures and chaina Mosaic fitting and finally

finishing the surface with white cement slurry and sloping out terrace slabs with following Rupees Five Hundred

21 specification laid to required slope not flatter than 1:80( including treating the vertical 21.00 Sqm 571.85 Seventy One and Paisa

surface of the parapet wall upto 20cms. height above finished level of terracing including Eighty Five Only

finishing, curing,testing etc. complete. Rate is including ten years performance of

guarantee bond to be given on stamp paper. (No extra shall be paid for increase in

thickness for proper slope).

(a) Applying a Two coat of Acrylic based polymer of approved brand and Manufactures

and as per recommandation of manufactures over the RCC Slab including Clearing the

surface before treatment.

(b) Finishing the surface with china mosaic pieces laid on 10 mm thick joint less cement

mortar of mix 1:3(1 cement: 3 coarse sand) admixed with proprietary water proofing

compound conforming to IS : 2645 and finally finishing the surface with trowel with neat

(c) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing for final test. All above operations to be done in order and as directed

and specified by the Engineer in charge.

Provinding and laying inegrated cement based proofing treatment of required thickness

over the roof including 10mm thick waterproofing cement plaster in cement plaster in

cement mortar1:3 and chaina mosaic fitting and finally finishing the surfase with white

cement slurry and slopping out taerrace slabs with following specification laid to required

slope not flatter than 1:80 ( the thickness of water proofing treatment near rainwater outlet Rupees Eight Hundred

22 or the lowest point of the finishedslope shall not be less then 45mm, including treating the 113.00 Sqm 826.54 Twenty Six and Paisa Fifty

vertical surfaseof the parapet wall up to 20cms . height above finished level of terracing Four Only

including finishing the top with joint less water proofing plaster , curing , testing etc.

complete. Rate is including ten years performance of guarantee bond to be given on

stamp paper. (No extra shall be paid for increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cemnt using 2.75 kg/sqm. of cement

admixed with properly water proofing compound conforming to IS -2645 and 10 mm thick

water proofing cement plaster in Cement mortar 1:3 over the R.C.C.slab incl. cleaning

the surface before treatment

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(B) Layign cement corcretre using broken brick bats 25mm to 40mm size with 50% of

cement mortar 1:4 (1cement :4 coarse sand ) over 10mm thick water proofing cement

plaster in cement mortar 1:3 (1 cement ,3 coarse sand) admixed with proprietary water

proofing compound conforming to IS 2645 to required slope and treating similarly the

adjoining walls up to 200mm height incl. rouding of junction of walls.

C) After Two Days of proper curing applying a second floor of cement slurry

(D) Finishing the surface with china mosaic pieces laid on 10mm thick joint less cement

plaster of mix 1:3(1 cement :3 coarse sand )admixed with proprietary water proofing

compound conforming to IS :2645 and finally finishing the surface with trowel with neat

(E) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curring for final taste

All above operation to be done in order and as directed and specified by the Engineer In

Celling painting (two coats) with plastic emulsion paint on undecorated wall surface to

give an even shade including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth With Applying two coats of Fine Putty Rupees One Hundred

23 & One coats of primer on new wall surface to give an even shade including thoroughly 128.00 Sqm 196.68 Ninety Six and Paisa Sixty

brushing the surface free from mortar dropping and other foreign matter and sand Eight Only

papered smooth. paint, primer and putty shall be as per approved make list of GSPHCL

Wall painting (two coats) with plastic emulsion paint on undecorated wall surface to give

an even shade including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth With Applying two coats of Fine Putty One Rupees One Hundred

24 Coat of Primer on new wall surface to give an even shade including thoroughly brushing 518.00 Sqm 185.74 Eighty Five and Paisa

the surface free from mortar dropping and other foreign matter and sand papered Seventy Four Only

smooth.paint, primer and putty shall be as per approved make list of GSPHCL

Finishing wall with Weather proof exterior emulsion paint on wall surface (Two Coat) over

and above applying one coat of primer to give an required shape even shade after

Rupees One Hundred Fifty

throughly Brushing This surface to remove all Dirt and remains of loose poweder material

25 484.00 Sqm 155.21 Five and Paisa Twenty

etc. complete. Primer shall be exterior weather coat and Paint shall be Appex Weather

Emulsion Only Paint and primer shall be as per approved make list of GSPHCL

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with

1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door is

with Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm

Face Veneer on Both Side with Lock rail on Center. Flush Door Provide with Teak wood

beading patti (32mm X 12mm) on Peripheries of Flush Door with Door Frame of Non

Teak Solid Wood of size 100mm x 60mm with Chemically Treated and Seasoned Rupees Eight Thousand

26 Including Paint Matching with Laminates. Frame & Flush door shutter having 5 year 15.00 Sqm 8410.19 Four Hundred Ten and

warranty against attack of biological agent like termite, borers, decay, fungi and harmful Paisa Nineteen Only

insects also warranty against seasoning related issues like crack, bending, twisting,

warping. Laminates on shutter shall be press by cold press method. Shutter shall be

brought to site in packed PVC bags & pvc coating shall be removed on completion of

work in such a way that shutter & Frame is free from nail mark & any damages etc.

(1) Aldrops 1 No., 250mm x 16mm & Tadi 1 No. 250 mm x 12 mm (For Internal Door ),

(2) Door Stopper 1 No., 200mm Long, (3) Double Leg Heavy Push Door Stopper/Magnet

1 No. & (4) Handle 2 No., 150mm Long X 10mm thick. Door are Fixing as per Details

Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per approved

Material Make List of G.S.P.H.C. The Required Frame is to be Obtained from Vanil

Udhyog Maked Only.

Providing and fixing Alluminium Section Window having extruded Aluminum Colour

anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section

no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x

1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of Rupees One Thousand

27 horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8947@ wt.of 4.00 Sqm 1902.50 Nine Hundred Two and

0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section Paisa Fifty Only

no:8949 @ wt.of 0.456Kg/mt) with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details including One Mosquitoe Jalli Shutter With Both Side

Locking Arrangment.

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of

size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of Rupees One Thousand Six

28 horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of 13.00 Sqm 1696.73 Hundred Ninety Six and

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick Paisa Seventy Three Only

transparent bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc complete

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern fabricated from

M.S. flat,square bars, round bars,c-channel, box pipe as per detail Drawings. Rate is

inclusive of welding with grinding smooth surface, two coats of Oil paint and one coat of

Rupees Seventy Five and

29 yellow Zinc primer coat of approved brand only. Oil paint shall be Luxol Enamel paint of 104.00 Kg. 75.29

Paisa Twenty Nine Only

Berger Paint india limited. or asian paint apcolite premium gloss Enamel of asian paint or

Dulux premium gloss enamel of dulux paint only structural steel shall be isi mark only.

Providing & FIxing to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of

90mm Dia Complete with Special flings, Compressor type Fittings, Wall clips on wooden Rupees Three Hundred

30 patty including making good the ceiling and floor on terrace rain water pipe shall be 90 91.00 Rmt 323.15 Twenty Three and Paisa

mm Dia. SWR horizontal pipe and vertical pipe and 90mm bend at the end near by Fifteen Only

Ground level rate are Inclusive of all Necessary Fittings required.

Providing and fixing precast R.C.C. Frame with Cover MD 10 Ton ( Rubber Mould

Rupees One Thousand

31 Finished ) inner size 600x450 mm with All Necessary fittings. 4.00 No. 1702.00

Seven Hundred Two Only

Credit Value for Door Shutter, Cupboard shutter and removed from site and clean site. Minus Rupees Two

Hundred Fifty Only

Credit value for old window shutter of fully glazed and removed from site and clean site. Minus Rupees Four

33 Including window M.S. grill. 12.00 Sqm -400.00 -4800.00

Providing I.S.I mark 7 levers three keys brass pad lock of NAVTAL (Goderej) make 65mm Rupees Two Hundred

34 dia on completion of project. 5.00 No. 243.64 Fourty Three and Paisa

Sixty Four Only

35A Providing and erecting Point wiring with approved 1.1 KV Grade ISI mark 1.5 mm2 24.00 Point 382.00 Rupees Three Hundred

copper FRLS PVC insulated wire with 1.5 mm2 copper FRLS PVC insulated wire for earth Eighty Two Only

continuity in 25/32 white approved make press fit casing capping with double locking

arrangement with grooves, trunking of size not below 10/12 mm in height IS:14927 ISI

Part –II and with approved make white accessories like inside and outside coupler, elbow,

tee, junction boxes etc. Also not below 1.8 mm thick duly sealed at joinst and 6 A.

Modular type switch / bell push & accessories and earth continuity of following type,

erected on PVC / Acrylic box, single mounting base frame covered with textured /

metallic / white front plate modules erected / flushed on wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose / H.D.Connector(make & model approved by EIC

and matching colur with switches accessories) as directed for open wiring. Light point.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Length of point wiring must not increase than 10 mtr. For that necessary switch boards

and their locations must be finalised before execution by agency otherwise payment will

not be done for extra long point. (For future extention, if required, agency has to erect one

higher size metal box and modular plate as per instruction of EIC. Cost of blank plate

shall be paid as per tender item) [conductor resistance should be as per IS:8130/1984]

For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step 6.00 Point 568.00 Rupees Five Hundred Sixty

type Electronic fan regulator both having ISI mark) Cat.-II

For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-II 6.00 Point 410.00 Rupees Four Hundred

For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark 12.00 Point 234.00 Rupees Two Hundred

35D Thirty Four Only

36A Providing and erecting Medium Class FIA approved and ISI mark white colour 90.00 Mtr. 24.00 Rupees Twenty Four Only

(embossed) RIGID PVC PIPES of following size complete erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling along

with continuous fish wire to draw mains with necessary fittings and junction boxes for

following dia. 20 mm. dia.

36B 25 mm dia. 100.00 Mtr. 33.00 Rupees Thirty Three Only

37 Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, 140.00 Mtr. 275.00 Rupees Two Hundred

chloride rigid material with ignition free & flame proof confirming BS .All necessary Seventy Five Only

accessories and measuring of following sizes. [1] 75 mm x 50 mm trunking.[MK,

LEGRAND, OBBO make Only]

38A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade in 80.00 Mtr. 56.00 Rupees Fifty Six Only

25/32 white approved make press fit casing capping with double locking arrangement

with grooves, trunking of size not below 10/12 mm in height IS : 14927 ISI Part –II and

with approved make white accessories like inside and outside coupler, elbow, tee,

junction boxes etc. Also not below 1.8 mm thick duly sealed at joinst with FRLS PVC

insulated wire for earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS

copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code. (Conductor resistance should be

as per IS:8130/1984)

38B 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS 60.00 Mtr. 135.00 Rupees One Hundred

copper multi stranded conductor for earthing as per standard colour code. (Conductor Thirty Five Only

resistance should be as per IS:8130/1984)

39 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe with 150.00 Mtr. 30.95 Rupees Thirty and Paisa

necessary socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. Ninety Five Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

40 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm 6.00 Each 7025.00 Rupees Seven Thousand

dia in soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod Twenty Five Only

must be made from Corrosion free Hot dip galvanizing pipes having following

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of

Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand

Terminal Size: 70mm X 100mm length, Terminal Should be made from inner pipe for that

pipe must be pressed and gave rectangular shape so its work as a terminal.The hot deep

galvanising must be done after above process.Galvanised thickness must be minimum

75 micron any where. SS Nut bolt:- 2 no.with washer suitable for 14mm dia. hole must be

provided at terminal. total minimum Weight(approx.) of earth electrodewith inside

conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for

long time Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X

mm depth and Cover should be heavy duty cast iron with required size of 300 mm X

mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to

submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured

with earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage

between neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for

one year. Earthing must be done in the presence of A.E. (GSPHCL)]

41 For above earthing additional charges for boring in hard rock soil (by breaker) & filling 6.00 Each 276.00 Rupees Two Hundred

soft soil in earth pit (certificate for soil have to given by DEE / AE along with photographs) Seventy Six Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

42 Supplying & erecting Sintex or approved make SMC press moulded composite FRP. 6.00 Each 510.00 Rupees Five Hundred

loop-in, loop-out approx. 2mm thick box complete with bakelite connector strip 4way & Ten Only

hinged doors having locking arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable clamps& earth bolt of following size of

box.(b) 250 mm x 200 mm x 100 mm [deep]

43 Supplying & erecting LED indoor fitting of approximately 4 feet long with LED of wattage 12.00 Each 370.00 Rupees Three Hundred

0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink shall be Seventy Only

made from Aluminum exttusion having enough strength (Sample must be approved by

EIC) With Polycarbonate diffuser With Following Specification

(1) Company Mark/Name on the Fitting

(2) Rated input voltage and frequency 220V to 2240 VAC,50Hz

(3) Rated input wattage max 24 W

(4) Rated input current ; 0.2 Amp.

(5) Power Factor : Min.0.90

(6) ATHD : Max. 15%

(7) Rated Luminous flux : Min. 2420 lm

(9) CRI : Min/ 80 Ra

(10) Driver Effciency : min. 80%

(11) LED life span : Min. 50000 Hrs @ L70

(12) Over Voltage Protection : Withstand up to 440 V/AC for 4 Hrs.

(13) Surge Protection : Min.2 KV

(14) IP rating : IP

(15) IK rating : IK

(16) Short circuit, Open Circuit & Reverse Polarity must be provided

(17) Fixing clamp design & strength should be sufficient to hold the fitting erected

on wall or ceiling.

(18) 3 core copper wire of appropriate size with earthing connector (Note:-The

manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs

free replacement Guarantee for complete Fixture) Approval will be given strictly

subject to item specification.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

44 Providing and erecting Polycarbonet body surface mounting LED Bulk head type 9 12.00 Each 780.00 Rupees Seven Hundred

watt Lighting Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And Eighty Only

lumen output from luminaire 720 lm, input voltage range 90-300 V AC, 50 Hz cool white

(3000 to 6500 k), inbuilt driver having efficiency >=80lm/w, -20 deg C to + 60 deg C

working temperature, AL frame with Beam Angle 120 deg.

45 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 6.00 Each 1929.00 Rupees One Thousand

Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, Nine Hundred Twenty Nine

(2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: Only

maximum 53W, (5) RPM: minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of

insulation: 'B', (8) No. of heavy duty premium quality Ball bearing: Two, (9) Total Body:

Top & Bottom should be alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11)

Colour: White high grade powder coating, (12) Canopy: Two Nos. Heavy duty, (13)

Condenser: min 1.5 MFD (15% Tolerance )as per is 1709-1984, Aluminium body

premium quality, Branded make,(14) Down road: up to 1.0 mtr as per site requirment,

(15) Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per site requirment,

(17) No vibration and noise due to mechanical parts. (Agency has to erect safey wire with

ceiling fan and checked with EIC) (OEM has to approved model as per tender

specification and tested at ERDA) (Necessary test reports should be submitted strictly at

the time of approval. Sample approved by EIC subject to above specification only)

46 Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with 6.00 Each 43.00 Rupees Fourty Three Only

Making the site as original.

47 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated 2.30 Sq. Mtr. 16230.00 Rupees Sixteen

indoor type cubical panel board having IP-42 & above protection as per approval from Thousand Two Hundred

engineer incharge and made from 2 mm. thick CRC M.S. sheet for outer body & doors, Thirty Only

1.6 mm. thick CRC M.S. sheet for internal partitions with necessary supporting angles,

flats including skirting, bending, drilling, welding, riveting with internal partitions & cable

alley as per requirements & instruction of engineer-In-Charge with erection of supplied

switchgears, busbars with suitable size of interconnecting PVC copper wire / Copper-

Aluminium strips, rubber gromets, rib, control wires, backelite control fuses, measuring

instruments, earth bus & earth bolts, foundation flange-bolts-base plates, sufficient nos.

of hinged doors, handle with locking arrangement, rubber gasket complete with Required

Nos. heavy Duty Connector with Cadmium plated nut and bolt for Anti rusting

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

The panel shall be supplied with Seven Tank chemical process which shall be carried out

before applying painting, painted with powder coating. (The rates excludes the cost of

switchgears, busbars, interconnecting mains & Copper / Aluminium strip, fuse, meters

etc. The dimension shall be measured excluding base beams) The standard companies

switch gear shall be used and only manufacturers at CPRI approved factory as per IEC

61439 and shall be certified by that company whose switch gears are used after

fabrication for beneficial use. With 350 mm depth

Panel manufacturer have to give 5 years maintenance and service support if in case of

breakdown or fault. Panel manufacturer have to submit electrical meter calibration report.

Agency should design the panel in such a way that there should not be any excess in

panel area (sq.mtr) & length of bus-bar (mtr), if any excess occurs draw attention to

GSPHCL at the time of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and skill work force under

supervision of electrical engineer and guidelines given by manufacturer to avoid damage

to the item. Picture of it to be submitted in running bill / final bill.

Size of door and Ele. room / Pump room shall be checked by agency's engineer before

giving order. If found any problem in size discuss with GSPHCL engineer for rectification

before giving order. [Including Necessary numbering / marking on PANEL done with red

colour radium sticker as per site requirement and instructions given by EIC on site. Font /

number size given by EIC on site as per requirement] (All Panel as per IEC 61439 as

per NBC Guideline) [Manufacturer must be of Gujarat state so three stage

inspection can be done]

48 Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 6.00 Each 1263.00 Rupees One Thousand

x 1/2 digits LED display, 0 to 750 AC Volts range having 0.5 class accuracy erected on Two Hundred Sixty Three

existing panel board with all connection, wiring etc. with manufacturers calibration Only

certificate. [make and model approved by EIC strictly as per tender specification]

49 Supplying and erecting approved make panel mounting type Digital Ammeter having 3 6.00 Each 1543.00 Rupees One Thousand

digits LED display, external CT operated, calibrated for 0 to 1000 Amps. suitable to Five Hundred Fourty Three

operate on 500 Volt AC, having 0.5 class accuracy erected on existing panel board with Only

all connection, wiring etc. with manufacturers calibration certificate. [make and model

approved by EIC strictly as per tender specification]

50 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 12.00 Each 314.00 Rupees Three Hundred

V on existing panel board with necessary connections. [make and model approved by EIC Fourteen Only

strictly as per tender specification]

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

51 Supplying and erecting approved make suitable panel indicator LED type lamp, lens 18.00 Each 43.00 Rupees Fourty Three Only

cover, complete erected with necessary connections.

52 Providing and Erecting of Miniature circuit breaker single pole 6 Amp. to 25 Amp. 30.00 Each 111.00 Rupees One Hundred

suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be Eleven Only

erected in existing box. confirming to IS 8828/1996 with ISI Mark.

53 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 25.00 Each 272.00 Rupees Two Hundred

VA burden having 0.5 class accuracy erected in existing CRCA box duly secured with Seventy Two Only

insulating materials connected to the meter [make and model approved by EIC strictly as

per tender specification]

54 Supplying & Erecting Approved Make Extended operating rotary handle with pad lock 11.00 Each 865.00 Rupees Eight Hundred

with three position Trip, Off, On suitable for 25 Amp. to 250 Amp. panel Sixty Five Only

mounting.(Company Must be same company of switchgear)

55 Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 GMS 7.00 Rn.Mtr 4378.00 Rupees Four Thousand

sheet dust & vermin proof having hinged door with rubber gasket and necessary busbar Three Hundred Seventy

supports with copper busbar having current density not more than 1.6 amp/sqmm (Rated Eight Only

current per Cross Section area) duly wired with colour insulating tape for phase

sequence, three phase & neutral Each equal & one meter long suitable for following

current capacity with necessary painting mounted on wall or pedestal frame of required

size with necessary incoming and outgoing connections with proper size of copper

strip/wire with lugs as directed. Suitable for 100 Amp. capacity having cross section area

not less than 250 sq.mm. [make and model approved by EIC strictly as per tender

56 Providing & erecting Approved make Three pole moulded case circuit breaker having 6.00 Each 5302.00 Rupees Five Thousand

breaking capacity ICU of 25 K.A. and above at 415 V having normal current rating 100 Three Hundred Two Only

A. with variable/Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections, spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% ICU Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

57 Providing and erecting Approved make Four pole moulded case circuit breaker having 5.00 Each 6112.00 Rupees Six Thousand One

breaking capacity ICU of 25 K.A. at 415 V, having normal current rating up to 25 A to Hundred Twelve Only

100 A. with variable/Fixed thermal & magnetic release suitable to work on A.C. supply

c/s. with all internal connections, spreader tinned copper & complete erected in existing

16 G.M.S. housing. ICS=100% of ICU only Cat III

58 Supplying and erecting KITKAT pattern porcelain cutout with base of following current 18.00 Each 416.00 Rupees Four Hundred

capacity erected on existing block board. [v] 200 A. 500 V. Sixteen Only

59 Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load (C 24.00 Each 327.00 Rupees Three Hundred

curve) having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having Twenty Seven Only

following capacity. For 40 Amp.

60 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) 25.00 Each 730.00 Rupees Seven Hundred

having 10KA breaking capacity & confirms to IS :8828 in existing box having following Thirty Only

capacity [c] 63 Amp.

61A Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet 24.00 Each 272.00 Rupees Two Hundred

steel duly powder coated with gasket, dust & vermin proof bakelite shield two earthing Seventy Two Only

terminals for following type of RCCB, RCCB + MCB [a] For 2 pole [Same company

metal box used as MCB / ELCB used with earthing terminal with necessary

Numbering / marking with oil Paint by painter]

61B For 4 pole [Same company metal box used as MCB / ELCB used with earthing 25.00 Each 442.00 Rupees Four Hundred

terminal with necessary Numbering / marking with oil Paint by painter] Fourty Two Only

62 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for 1100 140.00 Mtr. 361.00 Rupees Three Hundred

volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage Sixty One Only

1.0 mm thick cable clamp or in existing DWC pipe underground or road crossing or floor

of following size of cables. [B] For 4 core x 4 sq.mm.

63 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible 50.00 Mtr. 171.00 Rupees One Hundred

Submersible copper cable approved make of following Size. [d] 3 Core x 6 Sq. mm. Seventy One Only

64 Supplying and erecting Water tight M.S.Box of size 20 x 15 x 15 cms. to erect suitable 2.00 Each 232.00 Rupees Two Hundred

kitkat fuse / MCB to be . erected on polished wooden board inside the box with Thirty Two Only

hinged/sliding door with rubber rings and erected on pole with suitable pole clamp, all

duly painted with one coat of red oxide and two coats of paints. (Cost of Fuse / MCB shall

be taken extra) [Provision for motors cable joints near sump]

65 Providing & fixing water proof straight joint in PVC insulated flat flexible copper cable 6.00 Each 188.00 Rupees One Hundred

by using insulated material water proofing material and making the joint complete. UP to Eighty Eight Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

66 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 10.00 Sq. Mtr. 2289.00 Rupees Two Thousand

existing min. 25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing ICDP Two Hundred Eighty Nine

SWITCH and energy meter (contractor shall make approved drawing of Bakelite sheet To Only

arrange required No. of Energy meter & ICDP switch -busbar etc. as per Actual space

available in electrical room at site)

67 Providing, erecting, Fabricating the M.S. structure as per requirement of site as per 250.00 Kg. 75.10 Rupees Seventy Five and

structure design Including proper size approved by EIC of M.S. angles, flats, bars, Paisa Ten Only

square pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete with cutting,

welding, grinding and finishing duly painted with Asian/Nerolac make premium quality oil

paint and true care red oxide metal primer,asian paint make with erection on site as per

direction of engineer in charge with necessary grouting cementing, plastering and

finishing complete. All hole opening of square pipe end must be closed with M.S plate

welding. Payment will be done on KG as per Actual weight.

68 Providing and erecting metalic danger notice board for MEDIUM VOLTAGE installation 6.00 Each 69.00 Rupees Sixty Nine Only

to be erected as per I.S.

69A Providing and erecting following type of Modular Type Accessories mounted with 20 G 12.00 Each 16.00 Rupees Sixteen Only

company fabricated metalic box, single mounting base frame covered with textured /

metallic front plate, modules erected with necessary connection. As desired by Engineer

in charge.Blank Plate Single. Cat.-II.

69B (9) 16 Amp. SP one way switch CAT II 6.00 Each 130.00 Rupees One Hundred

70 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside 6.00 Each 487.00 Rupees Four Hundred

diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and Eighty Seven Only

length suitable for 76.5 / 80 mm. required size of pole top or pipe in pipe surface for

terrace as per instruction of EIC or wall bracket as per instruction of EIC having nuts and

bolts for fixing the brackets and having spread of Upto 0.50 mtr. length with suitable rise

as per site condition and suitable welded stiffner reducer and nipple with check nut

complete painted with one coat of yellow zinc and two coats of alluminium paint for Single

arm bracket suitable for pole or terrace as per design given by EIC (a) For single arm

bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj, Valmont,

Transrail, Ambica Only) (Test certificate to be submitted)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

71 Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light 6.00 Each 3512.00 Rupees Three Thousand

Luminaire with total consumption of Max. 45 W with single piece die cast aluminium Five Hundred Twelve

housing, high power LED shall be mounted on high quality metal core PCB with Only

extremely precison designed heat sink complete with IP66 protection Class with

polycarbonate / thoughened glass cover the fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM 80 guidelines with LED module min.

130 lumen/watt with toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution. The watt capacity of each LED must be

≥ 4 watt in streetlight fitting The Fixture Should be able to be Pole Mounted and also

bracket mounted, provided with high quality driver for protection against high and low

Voltage cut Off, opertional for high amibient and high humid envirnoments, THD of driver

should be less than 10% and P.F > 0.95.

Also the Fixture should meet the following technical criterias Oprating range Voltage

to 270 V, system efficiency >= 110 lm/w, and total lumens not less then 4950, CCT >

5000K, CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV integral and

KV non integralThe Separate Potted driver should have over current, over voltage

protection, short circuit protection so that the fixture recovers once the fault is removed. In

addition to the above product should be operational in the temperature range of 0 deg to

50 deg and humidity range of 10% to 90% RH. (Note:- The manufacturer / authorized

Channel partner of the manufacturer has to submit 5 yrs free replcement Guarantee for

complete Fixture)

71 Providing & erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked 70.00 Mtr. 46.00 Rupees Fourty Six Only

copper wires of following size to be erected as directed. 3 core x 1.5 sq.mm. PVC

insulated round copper wire ISI mark.

72 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for 120.00 Each 8.00 Rupees Eight Only

cable of following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to

Providing and Laying of Mains with ISI marked, 1.5 KV grade electrolyte multi stranded, 120.00 Mtr. 56.00 Rupees Fifty Six Only

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC -

73A 227 erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required. One wire 6.00 sq. mm

300.00 Mtr. 17.00 Rupees Seventeen Only

73B One wire 1.5 sq. mm

130.00 Mtr. 141.00 Rupees One Hundred

73C One wire 16.00 sq. mm

Fourty One Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

One wire 10.00 sq. mm 150.00 Mtr. 91.00 Rupees Ninety One Only

Supplying and fixing radium sticker or Painting the number and words for inventory 250.00 Each 2.00 Rupees Two Only

Identification on erected fittings / equipment’s or Such accessories (MCBDB, Panel, Pole,

Rack, Earthing, Pump, Door etc.) as may required with good quality of enamelled paint or

fade proof, weather proof, waterproof high quality vinyl radium sticker for indoor / outdoor

application as directed by engineer in charge. For one character 50 mm height.(The

colour of sticker / paint should be as per instruction given by EIC as per site requirement)

75 Dismantling the existing light, fan, bell, independent plug point, wiring with mains of all 105.00 Point 1.00 Rupees One Only

types along with accessories etc. complete and handed over to dept.

76 Dismantling the existing switchgears, DB and Busbar of any size complete with / without 120.00 Each 7.00 Rupees Seven Only

board or angle iron frame.

TOTAL Amount Rs….(A+B) =

TOTAL Amount Rs….(A+B) =

I/c Executive Engineer

Signature of the contractor. G.S.Police.Housing Corp.Ltd.