Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.2 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹32.0 L+₹2.3 L (7.79%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest |
Tender Value
₹32.4 L
EMD Value
₹64,800
Closing Date
12 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
SPL REPAIR TO BLDG NO T-258 T-92 TNC-94 TNC-349 AND CERTAIN MINOR AND REVENUE WKS AT URI UNDER GE 969 EWS
2023_MES_612874_1
CA NO 969 WS - /2023-24
Open Tender
Civil Works
Item Rate
180 days
URI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 969 EWS
₹64,800
Yes
14 Oct 2023
9 Aug 2023
14 Sept 2023
9 Aug 2023
12 Sept 2023
24 Aug 2023
Amount
Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified and as directed.
M&L 0.63 mm thick, galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 grams per square metre complete all as specified and as directed.
M&L 0.80 mm thick plain, galvanised , mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing ( length and girth as fixed ) with grade of zinc coating 275 grams per square metre complete all as specified and as directed.
Dismantling wall and ceiling boards (Fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets complete all as specified and directed.
M&L wooden wall panelling and ceiling with tongue and groove joint laminated over high quality DHF 8-10 mm thick as specified and as directed.
M&L 4mm thick Plywood, grade BWR, type BB, fixed with crews to timber frame work
S&F in repair PVC hollow interlocking wall/ceiling panelling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg/ cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M/S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200 mm the exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement.
M&L for 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work, complete all as specified and as directed.
M&L for 18/19mm thick block boards, grade 2 quality, interior grade decorative type with decorative face veneer on both face, complete all as specified and as directed.
Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work, complete all as specified and as directed.
M&L for second class soft wood (Kail) clean swan timber fixed in scantling, complete all as specified and as directed.
All as per Ser item No 11 above but except timber complete all as specified and directed. (Note: Serviceable timber obtained from ser item No 10 above to be used).
Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work, complete all as specified and as directed.
S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all as specified and as directed.
S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm & not exc 13 Sqcm complete all as specified and as directed.
S&F second class hardwood plain fillets square, rectangular in section exc 3 Sqcm & not exc 6 Sqcm complete all as specified and as directed.
Dismantling of boarding any description fixed in any position with nails, complete all as specified and as directed.
S&F in repairs coloured Aluminium composit Panel on wall with necessary frame work of GI frame work, complete all as specified and as directed.
M&L for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and as directed.
All as per Ser item No 19 above but except boarding complete all as specified and directed. (Note : Serviceable boarding obtained from ser item No 13 here-in-before to be used).
S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched.
Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (Without taking off shutters from the frames).
S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed.
S&F 2nd class soft wood 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-1) kiln seasoned and chemically pressure treated, complete all as specified and as directed.
S&F 2nd class soft wood 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats, complete all as specified and as directed.
S&F 2nd class soft wood (Kail) 30 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats size of members of shutters as specified in SSR Part -I section 8 Clause 8.23 (b) for windows, ventilators etc are provided with stiles and rails, complete all as specified and as directed.
MS Cold rolled Butt hinges medium weight 100 mm long complete all as specified and as directed.
MS Cold rolled Butt hinges medium weight 75 mm long complete all as specified and as directed.
S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed.
S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F 200mm long Anodised Aluminium tower bolt complete all as specified and as directed.
S&F 100mm long Anodised Aluminium tower bolt complete all as specified and as directed.
S&F 150mm long extruded aluminium alloy handle
S&F 100mm long extruded aluminium alloy handle
S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple, complete all as specified and as directed.
S&F Sheet glass ordinary quality & glazing with oil putty in square n exc. 0.5 sqm in each pane 3mm thick complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden or wood based surfaces over 10cm width or girth etc all as specified and as directed.
S&F in repairs 20mm dia curtain rails , anodised aluminium alloy with fixing brackets, stops, rollers etc, complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for 25mm thick PCC (1:2:4) type B-O (using 12.5 graded aggregate) as in floors finished even and fair, complete all as specified and as directed.
M&L for Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, Incl screed bed 15 mm thíck in CM (1:6) complete all as specified and as directed.
M&L for Non skid coloured ceramic tiles 300x300x 6-7 mm thíck in floors etc set and jointed in neat cement slury and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar (1:6), complete all as specified and as directed.
M&L for Kota stone slabs Mirror polished, 20mm to 25mm thick, machine cut as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including screed bed of 15 mm thick in cement mortar (1:4), complete all as specified and as directed.
S&F glazed ceramic coloured tiles in verticles surfaces of size 600x300x7/9 mm thick set and jointed in neat cement slurryy and pointed white or coloured cement to match tile surface over and including 10 mm thick plaster in cement and sand mortar (1:4), complete all as specified.
M&L in repair for 8 mm thick prelaminated wooden flooring laid over existing concrete surface by the manufacturer as approved by the GE in writing in a manner and providing the items as specified below : (a) 125 micron polythene sheet (as vapour barrier) laid over existing concrete surface including taking all necessary steps to make the levelness and smoothness of existing Concrete surface and achieve moisture free conditions. (b) 5 mm thick thermocole sheet over polythene sheet (c) 8 mm thíck prelaminated wooden flooring Make:-Premier Vinyl flooring/Armstrong/Krishna Vinyle Ltd New Delhi
M&L for 18-20 mm thíck granite polished in wash basin counter and fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.
S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore complete all as specified.
S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 75 mm bore pipe, complete all as specified and as directed.
All as per Ser item No. 50 above but 110 mm bore of pipe
S&F for PVC (SWR) bend with access door inluding jointing with solvent cement 75 mm bore Complete all as specified and as directed.
All as per Ser item No. 52 above but 110 mm bore.
S&F vitreous China wash basin, white, oval shape size size 550 x 400 mm including, waste fitting chromium plated brass and rubber plug, procelain stopper, a pair of Cl brackets, waste pipe and waste cupling of 32 mm dia of PTMT (half or full threaded) (min wt 45 grms) etc. Complete all as specified and as directed.
S&F Brass CP central hole mixer for mixing hot & cold water screwed down for 15mm bore Pipe and fixed, complete all as specified and as directed.
S&F Vitreous china wash down water closet pan, flushing cistern including seat cover Make Jaquar Cat Part No VGS-WHT-0207 or equivalent in Cera, Hindware, complete all as specified and as directed.
S&F in repair Brass CP mixer for mixing for mixing hot & cold water screwed down for iron pipe including of telephonic shower Make:- Jaquar, Cat Part No QQT-7271 or Cera, Hindware or equivalent complete all as specified and as directed.
S&F in repairs CP health fauset hand held triggered nozle and delivers a spray of water with pipe complete all as specified and as directed.
S&F PVC connection 15 mm size, length 450 mm, with PTMT nuts,complete all as specified and as directed.
S&F 15 mm bore angle cock, fancy type chromium plated high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified and as directed.
S&F 1000 Itr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part-l, complete all as specified and as directed.
S&F Soap dish, vitreous China white, approximate size 160x160x90mm fixed to plugs with chromium plated brass screws, complete all as specified and as directed.
Brass chromium plated shower rose 125mm size, complete all as specified and as directed.
Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.
M&L for GI tubing medium grade galvanised with all fittings complete to wall, ceilings or laid on roof top all as specified and directed for 15 mm bore.
S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia, complete all as specified and as directed.
S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm-210gms. /25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.
Demolition of brick work, PCC block masonary, stone masonary or boulder masonary built in cement mortar complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) complete all as specified and as directed.
M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), complete all as specified and as directed.
M&L for rendering 15 mm thick in CM 1:4 on fiar faces of brick work or concrete surfaces finished even and smooth without using extra cement.
M&L for preparation of new surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified as directed by engr-in-charge.
M&L for preparation of old surfaces of walls and applying two coats of Oil bound distemper on plastered and other surfaces with alkali resistant priming paint complete all as specified as directed by engr-in-charge.
M&L for preparation of old surfaces of walls and applying two coats of Cement base paint on plastered and other surfaces with alkali resistant priming paint complete all as specified as directed by engr-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, all as directed.
Cement concrete 1:2:4 type B-1 (using 40mm graded crushed stone aggregate) as in surface channels, drains etc.
Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc complete all as specified and directed.
Mild steel TMTbars 10 mm dia over, cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking end and binding with and including mild steel wire (annealed) not Iless than 0.9 mm dia or securing with clips, complete all as specified and as directed.
M&Lprecast RCC man holes cover/ drain slab in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in CM 1:4 complete all as specified and as directed.
M&L for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.
M&L for Plates (plain or chequered) M&L for channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.
M&L for preparation of new previously untreated steel surface of any description (new galvanized steel surfaces) over 10 cmm in width or girth not otherwise described to receive painting, by coating with mordant solution including washing and cleaning and applying two coats of synthetic enamel paint over a coat of red pxide primer.
S&F LLDPE septic tank with upflow filter including media designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 and below foundation, vent shaft, connection etc complete for 30 users, complete all as per manufacturer direction and as specified. Note: 1) Excavate the pit as per the size of Septic tank leaving side gap of "9" on all sides. 2) Level the bed and foundation in PCC. 3)Place the septic tank into the pit. 4)Fill sides with dry sand & bajiri and water it fully for effective compaction. 5) Do inlet & outlet pipe connection to the septic tank.
S&F LLDPE septic tank with upflow filter including media designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete for 20 users, complete all as per manufacturer direction and as specified. Note: 1) Excavate the pit as per the size of Septic tank leaving side gap of "9" inchs in PCC. 2) Level the bed and foundation 3)Place the septic tank into the pit. 4)Fill sides with dry sand & bajiri and water it fully for effective compaction. 5) Do inlet & outlet pipe connection to the septic tank.
M&L for Soakage well excavation in any type ordinary soil foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber screen chamber made of brick masonary in CM, RCC cover slab in M-25/SFRC cover, interconnecting pipes RCC/DWC complete filled with brick bats of size 2.40m dia x 4.5m effective depth complete all as specified and as directed. TD- CESZ/TD-1078/2011 SHEET 1/1
M&L for Soakage well excavation in any type ordinary soil foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber screen chamber made of brick masonary in CM, RCC cover slab in M-25/SFRC cover, interconnecting pipes RCC/DWC complete filled with brick bats of size 2.40m dia x 3m effective depth complete all as specified and as directed. TD- CESZ/TD-1078/2011 SHEET 1/1
Excavation over area n exc 1.5m deep and getting out hard/dense soilcomplete all as specified and as directed.
M&L for cement concrete type D-2 (1:4:8) using 40mm graded aggregate in foundation, filling and mass concrete, complete all as specified and as directed.
Walling of random rubble, stone masonry uncoursed well bonded bedded uilt in cement mortar (1:6) and pointed flush with surface in contact with earth complete all as specified and as directed.
MSL for Reinforced cement concrete slabs supported on walls, beams and columns in floors, roofs landing balconies canopies deck slabs and in shelves complete all as specified and as directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter rough finished surfaces of concrete, complete all as specified and as directed.
Rendering 15 mm thick on stone walling surfaces finished even and smooth with using extra cement in cement mortar (1:4) with WPC, complete all as specified and directed.
Supply only integral Water proofing compound
Excavation in trenches in any type of soil n exc 1.5m wide and n.exc 1.5m depth for foundation etc or for shaft walls , cess pits manholes etc n.exc 10 Sqm on plant and getting out complete all as specified and as directed.
M&L brick work with sub class B brick straight or curved on plan exc any radius in half brick thick wall built in CM 1:4, complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finished fair and even without using extra cement, complete all as specified and as directed.
M&L for Cement concrete type C2 1:3:6 (using 40mm araded crushed stone aggregate) as in Surface channels and drains, complete all as specified and as directed.
Returning filling in with approved excavated soil including spreading levelling watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
Removing excavated material (soil) not exc 50 m and depositing where directed at a level n'exc 25 cm in soft / loose soil complete all as specified and directed.
M&LBrick work with sub class 'B' burnt bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM 1:4, complete all as specified and as directed.
M&L 1:2:4 types B-1 (using 20 mm graded stone agg as in coping etc complete all as specified and as directed.
M&L for 150 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and as directed.
M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia.
Taking down carefully complete, incl copper/aluminum point wiring (light. Fan, socket or power) fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials at site and making good disturbed sufaces of walls, floors etc complete all as specified and directed by Engr-in-Charge. Note : The retrieved material is property of contractor as schedule of credit.
M&L for point wiring in PVC casing and caping with 1.5 Sqmm size multi stranded FRLS Copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including boards, with suitable cover sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor etc complete all as specified and as directed.
(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way
(b)One 3pin 5 Amp switch socket outlet on same board with accessories
(c) One 3 pin 5 Amp switch socket outlet on independent board
S&F switch Modular type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.
S&F Modular Socket, 6A - 2/3 pin combined 2 module, 2 in 1, 3 pin, complete all as specified and as directed.
S&F, Modular Bell push 6A 1 module complete all as specified and as directed.
M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS Copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including board with suitable cover sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor complete all as specified and as directed.
S&F switch Modular type, single pole, one way 16 amp 240 volts, complete all as specified and as directed.
S&F Modular Socket, 6A/16A - 2/3 pin combined 2 module, 2 in 1, 3 pin, 16 Amps complete all as specified and as directed.
S&F in repair White cover plate with frame, 2 module complete all as specified and as directed.
S&F in repair White cover plate with frame, 3 module complete all as specified and as directed.
S&F in repair White cover plate with frame, 4 module complete all as specified and as directed.
S&F in repair White cover plate with frame, 6 module complete all as specified and as directed.
S&F in repair White cover plate with frame, 8 module complete all as specified and as directed.
S&F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.
S&F Ceiling rose, 3 terminal /PVC/ polycarbonate, isolated body complete all as specified and as directed.
S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 16 sqmm complete all as specified and as directed.
S&F in repairs Double door metalic sheet metal enclosure for DB when MCB's to be used SPN 12 ways, 240 V with 200Amps rated bus bar on in complete fixed properly concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.
S&F in repairs MCB, SPN 63 Amps 240 Volts C curve, complete all as specified and as directed.
S&F in repairs MCB, SPN 32 Amps 240 Volts C curve, complete all as specified and as directed.
S&F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed.
S&F LED bulb 15 Watt. Complete all as specified and as directed.
S & F House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 900 bends. M.S. hook and stay or guy including taking down, complete all as specified and as directed.
S&F Bulkhead luminaire comprising of high brightness LEDs 9/10W LED, IP 65/66 complete all as specified and as directed.
S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 230 volts,6 Amps, complete all as specified.
Repair and re-fixing, re-assembling the existing cealing fan in same original position along with cable after rectification of defects such as apply the one coat varinsh for windings, painting fan blades, changing fan bearning, rewinding of fan write MES no on fan blades including nut, bolts and washers complete all as specified and as directed.
S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Complete all as specified and as directed.
Supply and fixing round/square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of charcoal, salt & necessary earth work as excavation, RF and removal etc."
S&F 3 Phase Prodigy (SECURE) Distribution Transformer Meter with built-in-current transformers, energy audit and system analysis, direct connected 3 Ph 4 Wire 415V with current range 40-200A, accuracy class 1.0, frequency 50 Hz, Insulation Class-Protection Class II, Impulse withstand 10KV, IS-13779, Dimensions (W x H x D) 365 x 283 x 221mm (with extended terminal cover) complete all as specified and as directed.
S&F SMC JUNCTION BOXES OF SINTEX as approx inside dimension (H X W X D) 250X250X155 MM complete all as specified and as directed.
Supply, laying UG cable XLPE Insulated ,screened. PVC bedded, galvanized steel strip or wire armoured heavy duty electric power cables 1100 Volts grade with stranded aluminium conductor of size 70 Sq mm 3.5 core. Note: The rate of LT Cable is inclusive of suitable size GI Pipe and connected items for protection of cable."
Note:- Schedule of credit Rs. 40,951 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
M/s Mohammad Shafi Malik
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .