Shifting of 3 core XLPE UG Cable 240 Sq mm Lichubagan Feeder

Amount

(SUPPLY)

Cable (XLPE 11 KV) 3C X 240 Sq mm

Cable (XLPE 11 KV) 3C X 120 Sq mm

HDPE PIPE ,PE-100 GRADE, 110 mm outer Dia 6 Mtr Long

Supply of 4 way (1 incoming and 3 outgoing feeder) H.T KIOSK/ 11KV outdoor type feeder piller made of 10SWG MS Sheet complete with aluminium busbar, HT insulator etc as required provided with Rocking system with ID marking with caption ' G.V sprcial UG LINE and painting to be fitted on structure of M S Angle (50X50X6mm) and MS Flat (40X6mm) including supply of M S Angle and Flat as equired and concreting of ratio 1:2:4 (0.054cum/leg) with excavation f earth centering shuttering & disposal of excess soil.

G.I strip 50 X 6 mm for DTR Earthing( H.T KIOSK)

Centrifugal Cast Iron Earthing Electrode 75mm Diameter, 3.5 mm Thickness with clamp (32x6 mm )and furne with long Gl nuts and bolts in middlwe,perforated holes,trapper and cut.

Earth enhancing compound/ Back Fill Compound 25Kg (Substitute of Charcoal & Salt)

Earthing Pit Chamber Earthing Pit Chamber Polymer Square Earth Pit Chamber-Outer Size:-500 mm (L)x 500 mm (W) x 200 mm (H), Inner:-400 mm (L)x 400 mm (W)x 165 nm (H)

1" dia PVC Pipe

Supply of M.SNuts & Bolts i/c Washer of assorted size ISI Marked machine made.

Supply of febricated clamps of assorted size of MS flat (50 * 6mm) with double coat of red oxide primer coating.

Carriage of the following:

Carriage of 9 Mtr length of pcc Pole by Mechanical transport from the Electrical Sub-Divisional Site Store to Working site Vis-à-vis,including loading,unloading and stacking as required. A) Upto lead range 25 KM i) For maximum 4(four) poles

Carriage of line materials such as cable,AAC, AAAC, ACSR,G.I wire,Cross Arm,Stay set,Insulators etc.by Mechanical Transport from the Electrical Sub-Divisional site store to working site Vis -a-vis, including loading, unloading and stacking as required upto the lead of 25 KM to 50KM.

Carriage of G.O.S,D.O.F,L.A etc by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-à-vis including loading,unloading and stacking as required. A) Upto the lead range 0-25 KM

(DISMENTALING OF THE FOLLOWING)

Dismantling of 7.0mtrs, 8mtrs & 9mtrs length of Steel Tubular POLE at any kind of soil, including excavation of earth, refilling the pit with soil upto the ground level, ramming and ma

Dismantling of 11KV 200 Amp GOS unit set of three nos including necessary connection

Dismantling of M.S Channel Cross-Arm 0.3 to 1.6 Mtr Long75 x40 x 40 x 6 mm

Dismantling of M.S Channel Cross-Arm 2.2 to 2.8 Mtr Long75 x40 x 40 x 6 mm

Dismantling of 11KV Pin insulator along with Pin

Dismantling of 11KV Single Disc insulator set along with necessary fittings.

Dismantling of (Single Conductor) ACSR 6/1 / 3.35 mm dia 'RABBIT' including coiling etc. Complete as required.

(ERECTION)

Erection of 9 Mtr length of pcc pole at any kind of soil upto a depth of 1/6 th of pole height,including excavation of earth,refilling the pit with soil upto the ground level ramming and making complete in all respect.(SUPPLY BY TSECL)

Erection of 11 KV, 200 Amps G.O.S unit set of three nos.including necessary connection complete as per technical specification.(Excluding the cost of back clamp,Nuts & Bolts).(SUPPLY BY TSECL)

Laying & stringing of 1 KM(Single Conductor) ACSR 6/1/3.35 mm dia RABBIT including hoisting & binding etc.Complete as required.(SUPPLY BY TSECL)

Erection of 11 KV Pin Insulator along with Pin (SUPPLY BY TSECL)

Erection of 11 Kv Single Disc insulator set along with necessary fittings(SUPPLY BY TSECL)

Erection of M.S Channel Cross -Arm 1.3 to 2.8 Mtr long 75 x 40 X 40 X 6 mm( Excluding the cost of back Clamp,Nuts & Bolts).(SUPPLY BY TSECL)

Fabrication of Cross- Arms by MS Channel/MS Angle as per Specification.

Laying of 8 SWG wire at 300 mm below the ground level for earthing of sub-station equipments from earth electrode(SUPPLY BY TSECL)

Erection of Bi-Metallic lugs of 120 Sq mm-12(SUPPLY BY TSECL)

Erection of Bi-Metallic lugs of 120 Sq mm-12(SUPPLY BY TSECL)

Erection of Bi-Metallic lugs of 240 Sq mm-12(SUPPLY BY TSECL)

Erection of of Stay set direct in earth complete with 19 mm X 1800 mm long stay rod,anchor plate of size 300 X 300 X 8 mm thimble turn bluckle,7/3.15 mm dia G.I standred stay wire and stain insulator etc with Supply of M.S Clamp,Nuts 7 Bolts etc as required and making complete in all respect.(SUPPLY BY TSECL)

1"dia PVC pipe

Laying and Commissioning of 3-phase 3-core 6.35/11 KV 120 /240 Sq mm XLPE insulated Aluminium power cable throug PE 80,PN 6 110 mm O.D minimum wall thickness 7.7 HDPE pipe by all terrain horizantal directional drilling, digging Machine Boaring across the road crossing without affecting the existing road surface at adepth of minimum 1200 mm i/c coiling of excess cable with protecting by double layer brick soiling as per design,specefication & engineering reuirement of TSECL whereever required.

Manually digging /drilling horizontally or diagonali direction for road crossing / Water supply line/Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia GI pipe direct into the earth at a depth of minimum 1100mm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering In Charge.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation,sand cushioning, protective covering and refilling the trench etc as required. TrenchSize:-Width-350 mm,Hieght-1200 mm/Sand (Couhioning) Hieght-250mm,Width-350 mm/protection:-Double layer Brick. Upto 120 Sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation,sand cushioning, protective covering and refilling the trench etc as required. TrenchSize:-Width-350 mm,Hieght-1200 mm/Sand (Couhioning) Hieght-250mm,Width-350 mm/protection:-Double layer Brick. Above 120 Sq.mm upto 400 Sq mm

Supply & making making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 Core ,XLPE aluminium conductor cable of 11 Kv grade as required. Upto 150 Sq mm

Supply & making making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 Core ,XLPE aluminium conductor cable of 11 Kv grade as required. Above 150 upto 300 Sq mm.

Coiling of excess Single/3 core/ 3½ core upto to 400 sqmm.HV/MV,XLPE insulated,armoured power cable direct into earth including excavation of earth upto a depth of 1500 mm (Size pit should be 2250 mm X 2250 mm or as per site requirement,including 1st class brick protection of two layer flat brick soling,300 mm .Fine sand (Local quary) for cushioning/bed and refilling and ramming the excavated soil as per direction of Engineer in Charge.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of all Size in the GI Pipe/HDPE for riser including tieup of pipe with pole by the MS flat clamp(excluding cost of clamp and Nut & bolts) as required. up to 400 sq.mm.

Grouting of KIOSK'S leg with cement concrete ratio 1:2:4 (1 Cement:2 River sand : 4 Jhama bricks aggregrate 20 mm nominal size) in/c supply of cement,sand and brick aggregated complete with excavation refilling as [email protected] cum per leg as per TSECL specification,No of leg for one KIOSK=4 Nos.

Erection of 4 way (1 incoming and 3 out goining feedero H.T KIOSK/11 KV Outdoor type feeder pillar made of 10 SWG MS Sheet complete with aluminium busbar,HT insulator etc as required provided with locking system and painting to be fitted on structure of MS Angle(50 X 50 X6 mm) and MS flat (40X6 mm) including supply of MS Angle and Flat as required and cocreting of ratio 1:2.4 (0.054 cum/Leg) with excavation of earth centering shuttering & disposal of excess soil.

Providing of of Pre-cast cement concretecable identification route marker (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement: 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits as per design, drawing and specification of TSECL. The marker shall be embossed "DANGERS: TSECL, ELECTRIC POWER CABLE" with Black colour letter(both side). The visible part shall be painted with Yellow colour japan paint. (1 cement: 2 coarse sand: 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement: 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.

M/S SAJAL DAS

M/S GHOSH ELECTRICAL ENGINEERING

KAJAL DAS

Curiosity Constructions Pvt Ltd