Strengthening of sewerage (Temporary Sewage disposal Arrangement at S.T.P. Sector-50), Noida.

Supply, Erection, Testing & Commissioning of Non Clog Sewage Submersible Pump Set complete in all respect as per direction of Engineer in Charge. Technical Specification of Pump Set shall be given below-

Motor Type- SQ. Cage Induction Motor 960 RPM suitable for operation on 400/440 volts, 3 phase, 50 Hz AC Supply with 'F' Class Insulation & IP-68 protection.

Pump- a) Body-Cast Iron with 2% Nickil b) Impeller-CF8M(SS316) c) Shaft-Stainless Steel d) Auto Coupling Stand-CF8M (SS316) e) Guide Pipe- Stainless Steel (SS304) @ 16 Mtr. f) Lifting Chain-alloy Steel @ 16 Mtr. G) Mechanical Seal-Upper Seal (Carbon/Crome Steel), Lower Seal (Silicon Carbide)

Field Requirement- a) Type-Non Clog Sewage Submersible Pump b) RPM- 960 c) Head- 28 Mtr. d) Copper Cable for Sewage Submersible Pump Suitable Size @ 25Mtr e) Specific Gravity of Sewage-1.07 f) Solid Handling Capacity (Dia)- Not less than 100 mm Note-Contractor shall be submitted G.T.P. & all compony test certificate of the material used in pupm set. (Make-Pullen Pump Industries Pvt. Ltd/A.s aqua Machineries Pvt. Ltd/M/s Kishor Pumps Pvt. Ltd.

Non Clog Sewage Submersible Pump Set Discharge 432 cum/hr, HEAD:-28Mtr, Rating 60/80, Outlet size of pipe 200mm dia, Cable 2 x 50 sqmm x 3.50 core + 1.50 sqmm x 4.0 core

PVC Flexible cables copper conductor 1100V conforming to 694/1990 double sheathed circular rate including excise duty, sales tax (Make- Tridev Electricals/uttam Engineering Works / Sweta Eclectricals)

35sqmm X 4 core

S/F of fully Automatic Control panel with 75 H.P. star delta starter for submersible/V.T. Pump sets with following features No-volt, Under-voltage, Over-voltage protection, Micloprocessor based overload protection, Unbalancing protection, Winding temperature controllrr. seal monitor, reverse rotation trip device and the automatic start/stop device according to the levels in the sump. The control panels are provided with normal indications such as Digital voltmeter, Digital Ammeter, and indicating lamps. Above panel is dust and vermin proof made out of 14 SWG CRC sheet with powder coating paint as per directions ofE/1, (Make: single Contractor-L &T, MCCB-L&T, WTC-Minilec, phase prienter WLC/SM-Pumpcare C.T.-AE, Indicating Light & Push Button- L&T, Control Fuse-EE, Fuse Base-EE, Timer-L&T)

Hire charge of Generator (Including cost Service of operating staff, supply of lubricating oil and diesel also)

D G Set / Generator 100 KVA/125 KVA