Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.5 LAccepted-AOC DEPOTPARA PO BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹39.7 L+₹1.5 L (4.06%)Rejected-AOC TELEPARA HATKHOLA PO BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L2 | Rejected-AOC OTHER THAN L1 BIDDER | |
| 3 | L3₹40.2 L+₹2.0 L (5.34%)Rejected-AOC MASTER QUARTER PARA WARD NO 12 DHUPGURI 735210 JALPAIGURI WB | COOCHBEHAR | WEST BENGAL | 735210 | L3 | Rejected-AOC OTHER THAN L1 BIDDER | |
| 4 | L4₹41.0 L+₹2.9 L (7.50%)Rejected-AOC GARRISON ENGINEER GE NORTH BINNAGURI | JALPAIGURI | WEST BENGAL | 735232 | L4 | Rejected-AOC OTHER THAN L1 BIDDER | |
| 5 | L5₹42.3 L+₹4.2 L (11.0%)Rejected-AOC PO BINNAGURI PS BANARHAT DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L5 | Rejected-AOC OTHER THAN L1 BIDDER |
Tender Value
₹39.0 L
EMD Value
₹78,000
Closing Date
4 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
RAJESH KUMAR, IDSE
GE (S) BINNAGURI PO BINNAGURI DIST JALPAIGURI
SPL REPAIR OF BLDG NO NP 13 AND NP 15 UNDER GE (S) BINNAGURI
2024_MES_649017_1
8643/E8
Open Tender
Civil Works
Item Rate
180 days
GE (S) Binnaguri
As per Tender documents.
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹78,000
Yes
27 May 2024
9 Apr 2024
6 May 2024
9 Apr 2024
4 May 2024
27 Apr 2024
9 Apr 2024 - 27 Apr 2024
Amount
Dismantling of Plain or corrugated asbestos sheets in roof coverings complete all as specified and directed.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S & F pre painted galvalume aluminium zinc coating GI Based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in eaves board fixed with selp tapping screw complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.
M&L for Second class hardwood clean sawn unframed timber scantlingscomplete all as specified and directed.
Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and directed
S & F for Anodised aliminium snap grid frame work for false ceiling complete all as specified and as directed.
S&F 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and as dirceted.
Taking down chowkat with shutter exc. 1.5sqm and n.exc 4sqm each complete all as specified and directed.
Ditto as item no 9 but not exceeding 1.5 complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces including raking out joints,hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6), finished surfaces even and smooth complete all as specified and as directed.
M&L for rendering 20 mm thick(10MM +10MM) wuth wpc on upper layer brick work or concrete surfaces in cement mortar (1:4) finished surfaces even and smooth complete all as specified and as directed.
Supply only Integral water proofing compound complete all as specified and directed.
M&L for preparing of new plastered surfaces of wall (internal & external) and applying two coats of cement-based wall care putty including preparation of surface to receive finishes (primer, distemper, paint etc.) complete all as specified and as directed. Note: Preparation of new plastered surface and application of wall care putty to be carried out mechanically by authorised applicator and as per the manufacturer's instructions. Please refer Smart Painting clause mentioned in Particular Specification.
M&L for applying two coats of Acrylic smooth exterior anti-fungal paint over a coat of primer over finished putty surfaces of wall complete all as specified and as directed. Note: 1. Application of new finishes to be carried out mechanically by authorised applicator and as per the manufacturer's instructions. Please refer Smart Painting clause mentioned in Particular Specification. 2. Application of putty and preparation of surface to receive the paint shall be measured and paid separately under relevant item of this schedule.
M&L for applying two coats acrylic-based distemper over a coat of primer over finished putty surfaces of wall complete all as specified and as directed. Note: 1. Application of new finishes to be carried out mechanically by authorised applicator and as per the manufacturer's instructions. Please refer Smart Painting clause mentioned in Particular Specification. 2. Application of putty and preparation of surface to receive the distemper shall be measured and paid separately under relevant item of this schedule.
Prepare surface of wood new or old of any discription and girth not otherwise described and treated with creosote complete all as specified and directed.
Dismantling floor hearth or wall tiling incl cement mortar bedding and removing the rubbish off the premises complete all as specified and as directed .
M&L for coloured Non skid joint free ceramic tiles (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. .
M&L for coloured Non skid joint free ceramic tiles (Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.38 Sqm, vertical surfaces, in skirting etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match with the shade of tile including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. ..
M&L for glazed coloured ceramic tiles (350x450x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed
Taking up or down steel tubing and connections,15mm bore including cleaning for re-fixing or removal from site of work complete all as specified and directed.
All as per item No.4 above but 20mm bore complete all as specified and directed.
S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed.
All as per item no 23 above but 20 mm bore pipe complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (European type), white including white plastic seat cover with mild steel CP hinging device,suitable brass CP jet flush pipe fixed complete jointing connecting and making good the disturbed complete all as specified and directed.
S&F in repair for PVC 10 ltrs capacity valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC pipe 32 mm dia all as specified and directed.
S&F in repairs vitreous china wash basin 550 x 400mm size white including brackets,CP waste coupling waste pipe,short connection complete all as specified and directed.
S& F in Repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinals gainst wall in cement mortar1:2, securing urinal to plugs withand including 60mmlong brassscrews, pointing around urinal back in cement; grating and Union fordischarge pipe complete all as specified and directed.
M&L in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L for 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F in repair bib taps, fancy type chromium plated with crutch or butterfly hadle screwed down ,screwed for iron pipe or brass ferule of 15mm bore complete all as specified and as directed.
S&F PVC (SWR) bends with access door of 110mm bore any radius complete all as specified and as directed.
M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
S&F in repair 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed
S&F 15 mm dia PVC connection 450 mm long, complete all as specified and as directed
S&F in repair Ball brass valves high pressure, with polythene float and flynut screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified.
S&F in repair 1000 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed.
S&F 15 mm bore Stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in Repair factory made z section steel window with side hung shutter fame includingprijecting/box type hinge with steel handle and steel peg stay complete with glazing bars dovetailed or welded including a shop coat red oxide priming complete all as specified and directed
S&F in repair of factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars fixed to existiog opening and making to match as per existing surfaces complete all as specified and directed.
S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed.
S&Fof 4mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified and directed.
M&L for Framed work such as grills, framed guard bars,for window by welding it to existing window frame and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F in repair Steel ventilators fixed type, with glazing bars complete all as specifed.
M&L for two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10 cm width or girth complete all as specified and as dircted.
S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc complete all as specified and directed. .
M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
S&F for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed. .
S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.
M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. .
S&F 100mm size mild steel butt hinges medium weight complete all as specified and directed.
S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete all as specified and directed.
M&L for 150 mm size aluminium anodised cast type handles complete all as specified and directed.
Demolition of cement concrete(un-Reinforced) of any description in any position not otherwise specifically provided for complete all as specified and directed.
M&L for 75mm thick PCC type C-2 (1:3:6) using 40 mm graded agg in plinth protection path/hardstanding finished cement concrete surfaces fair and even all as directed
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.
M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws (or provision of modular sunken box, modular back plate and top cover for housing of modular switch,socket, regulators etc as per site requirement) for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :- (a) One light point controlled by one way switch 5/6 amps.
(b) All as per item No 63, One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.
(c) All as per item No 63, One socket out let 5/6 amps point on the same board
(d) All as per item No 63, One socket out let 5/6 amps point on the independent board
All as per item No 2 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.
S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.
S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.
S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified and directed .
S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.
S&F Ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed.
S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed.
S&F, IP 20, class I, LED tube light fittings 20W (or nearest next higher wattage) (4feet), wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.
S & F LED street light fittings 35 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection complete all as spedified and as directed.
S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with din rail, IP-20 protection suitable for fixing MCB"S/lsolators complete including provision of blanking plates as required and taking down the old one complete all as specified and directed .
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Tripple pole & neutral with din rail, IP-20 protection suitable for fixing MCB"S/lsolators complete includingfour pole MCCB 63 Amps with blanking plates as required and taking down the old one complete all as specified and directed .
S&F MCB, Triple pole 32 amps, 415 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed.
S&F MCB, Single pole & neutral 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed .
S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed .
M & L Sub main wiring concealed type with two run single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size, making good the disturbed surfaces complete including necessary taking down.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. .
M&L for street light bracket made out of GI pipe light grade 32 MM dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and directed.
Taking down ceiling fan sealing cable end, dismantling blades and removing fan and blades to store complete all as specified .
M & L for painting of ceiling fans of any make/model and size complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.complete all as specified .
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.
Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 16 sqmm 4 core with and including all fixing & connecting accessories such as Aluminium cable lugs, cable gland, nut, bolts, washer etc complete including taking out old unsv cable as specified and as directed. (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A').
Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable complete all as specified and as directed.
Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms in depth complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.
Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.
Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.
M & L for horizontal boring across the existing road without disturbing the road surface for inserting GI pipe complete all as specified and as directed. Note :- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) GI pipe will be measured and paid separately under relevant item of Sch 'A' complete all as specified and directed.
M&L for 40 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed. Make: Tata/Jindal/Bansal
M/S MAJUMDER CONSTRUCTION
SUMAN CHAKRABORTY
Shri Amarnath Sah
MESSRS SEN BROTHERS
L. B. SHARMA
M/S PLABAN KUMAR GOPE
Biswanath Sharma
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .