Renewal work of Nanpara Shankarpur Lalpur Huzoorpur (MDR-165E) From Chainage 15.555 to 37.200 in District Shravasti (By Hot Mix Plant)

Amount

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

P/L of hot applied thermo plastic compound 2.5 mm thick including reflecto rising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass breads as per IRC 35.The finished surface to be level uniform & free from streaks and hole. in edges and center line.

Same as above in item but providing Repeated bars of yellow colour thermooplastic coupound in 5 mm thickness

Supply of fixing of Pavment makers (cat eyes) type of MP-4956-04 Avery denstion/3-M (USA make) sifting of usa plastic housing fitted with lightly pavment potting compound the housing shall contain matic two glass covered prismatic refelective face to efect incident light including all taxes.

PREM KUMAR SHUKLA

M/s Vishal Construction