CIVIL REPAIRING/ RENOVATION WORK OF RAJKOT NAGARIK SAHAKARI BANK BUILDING AT MITHAKHALI, AHMEDABAD GUJARAT.

Item no. Drawing Floor level Item Description Quantity Unit Rate Amount

Excavation for foundation upto 2'-6" depth including

Ground floor sorting out and stacking of useful materials and

Item No. 1 I-AH-2501-02 22.87 CBM 250

Parking Level plan disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Filling available excavated earth (excluding rock) in

trenches in layers not exceeding 20 cm. in depth consolidating each

Item No. 2 I-AH-2501-02 disposited layer by watering. 22.87 CBM 475

Parking Level plan

Providing and laying cement concrete 1:2:4 (1- Cement :

2- Coarse sand : 4- graded stone aggregates 20 mm

Item No. 3 I-AH-2501-02 nominal size) and curing complete including cost of 25.73 Sq.M. 850

Parking Level plan

formwork in foundation and Plinth (6" thick)

Providing 20mm thick cement plaster in single coat on

existing wall of the of the dug trenches in planter area

Ground floor finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Item No. 4 I-AH-2501-02 36.70 Sq.M. 290

Parking Level plan

Providing and applying chemical water proofing treatment with

cement polymer modified based waterproof compound like Tap Crete

Item No. 5 I-AH-2501-02 P151 of CICO or equivalent. On existing wall of the of the dug trenches 36.70 Sq.M. 650

Parking Level plan

in planter area.

Providing and laying VYARA Wet Cast paver blocks (Square, 200 × 200 ×

60 mm), free from cracks, cavities, or defects, laid over 50 mm thick

Item No. 6 I-AH-2501-02 kori bedding with proper slope to ensure water drainage as per site 30.19 Sq.M. 1050

Parking Level plan

Demolition of existing overground water tank as indicated in drawings,

including disposal of unserviceable materials and debris with all leads

Item No. 7 I-AH-2501-02 and lifts, using necessary equipment and transportation. 1.00 no. 2500

Parking Level plan

Repair and refurbishment on the under gound water tank with

removal of all tile/other material from the wall and floor surface

Item No. 8 I-AH-2501-02 including disposal of the debire and clearing the surface for water 20.81 Sq.M. 225

Parking Level plan

proofing treatment and plastering.

Providing and applying 2 coats of mala plaster with chemical

waterproofing treatment using cement polymer modified waterproof

compound such as Tapcrete P-151 of CICO or approved equivalent,

Ground floor including application of glass-fiber/net reinforcement in three coats on

Item No. 9 I-AH-2501-02 23.97 Sq.M. 695

Parking Level plan all wall and floor surfaces of the underground water tank, complete

with all necessary materials, equipment and labour as per site

conditions and instructions.”

Providing and laying premium quality waterproof white ceramic tiles

size (12" x 8") for under ground water tank. confirming to IS: 15622 of

approved make as specified laid on 20mm thick cement mortar 1:3 (

Item No. 10 I-AH-2501-02 cement: 3 coarse sand) including grouting the joints with white 23.97 Sq.M. 850

Parking Level plan

cement and matching pigment etc. on all wall and floor surface of

under ground water tank, considering with material with all the lead

Re-plastering of compound wall as indicated in drawings and wherever

required as per site assessment, Two-coat external plaster: 18–20 mm

total thickness, comprising 12 mm base coat (1:4 cement:sand)

Ground floor finished rough, and 6–8 mm finishing coat (1:4 or 1:5 cement:sand),

Item No. 11 I-AH-2501-02 11.61 Sq.M. 425

Parking Level plan with proper surface preparation, curing, and workmanship as specified.

including all the material and equipments required

Demolition of exiting kota stone as indicated in drawing and disposal

of unserviceable materials with all lead and lift from the site with all

Item No. 12 I-AH-2501-02 necessary equipments and transportation. 231.77 Sq.M. 130

Parking Level plan

Providing and laying Plain Cement Concrete (PCC) 1:2:4 (1 cement :

coarse sand : 4 graded stone aggregate of 20 mm nominal size) in

flooring of 75 mm (3") average thickness, including embedding 8 mm

TMT bar jali at 300 mm (1'-0") c/c spacing in both directions, properly

Ground floor tied with binding wire and fixed in position before concreting.

Parking Level plan The work shall include cost of all materials, labor, machinery,

formwork (if required), compaction, finishing, curing, and all leads and

lifts, complete as per standard specifications and as directed by the

Engineer-in-Charge.

Providing and laying machine-cut Kota stone slabs of size

approximately 600 mm × 600 mm (2'×2') and 20 mm thick, free from

cracks, cavities, or other defects, laid over a 20–25 mm thick cement

mortar bed (1:4, cement : coarse sand) on a 3" (75 mm) PCC base,

properly leveled and compacted to required slope to ensure drainage

as per site conditions.

Parking Level plan

Joints shall be filled with neat cement slurry mixed with matching

pigment, slabs rubbed, machine-ground, and polished to a smooth and

The rate shall include cost of all materials, labour, tools, equipment,

curing, finishing, and all leads and lifts, complete as directed by the

Engineer-in-Charge.

Demolition of existing damaged white marble as indicated in drawings,

removal and disposal of unserviceable marble pieces off-site, including

Banking hall first

Item No. 15 I-AH-2501-03 all required hand and power tools, cutting, chiselling, breaking, careful 6.97 Sq.M. 130

dismantling to avoid damage to adjoining finishes, stacking of

serviceable materials, loading, transport, and all leads & lifts.

Providing and laying White Agariya Marble slabs of size approximately

900 mm × 600 mm (3'×2') and 15 mm to 18 mm thick, free from cracks,

cavities, and other defects, laid in flooring or skirting over a 20–25 mm

thick cement mortar bed (1:4), properly leveled and compacted to

required slope for drainage as per site conditions.

Banking hall first

Item No. 16 I-AH-2501-03 Joints shall be filled with neat white cement slurry mixed with pigment 7.05 Sq.M. 2700

(matching the marble shade), cleaned, rubbed, polished, and finished

to a smooth and even surface.

The rate shall include cost of all materials, labour, mixing, laying,

finishing, curing, cleaning, and all leads and lifts, complete as directed

by the Engineer-in-Charge.

Providing and applying one coat of primer and three coats of approved

exterior paint (approved by the Bank & Architect), after thorough

Item No. 17 I-AH-2501-02 surface preparation including cleaning, sanding, removal of old paint, 217.15 Sq.M. 255

Parking Level plan

and finishing wall surface with putty wherever necessary. Complete

with all materials, labour and equipment, as specified

Providing and laying premium quality vitrified tiles (300 x 600) for

Basement floor, Dado as per approved design of VERMORA and confirming to IS:

Item No. 18 Banking hall first 15622 of approved make in colours and shades as specified laid on 10.78 Sq.M. 1200

floor 20m thick cement mortar 1:3 ( 1 cement: 3 coarse sand) including

grouting the joints with white cement and matching pigment etc.

Providing and installation of POP gypsum ceiling with all necessary

framework installation, board attachment, finishing work and light

Item No. 19 I-AH-2501-01 Basement floor 4.04 Sq.M. 699

cutting according to the light selection as shown in the drawing. Board

room (washroom).

Installation of wooden Glass door (3' X 7'-9") with 3" X 3.5" wooden

frame with polish and 5mm clear glass fixed in between the fram as

Item No. 20 I-AH-2501-01 Basement floor 1.00 no. 25000

indicated at the area shown in the drawing with polish to be matched

with board room partition and door.

Repair and refurbishment of the existing wooden ceiling in the pantry

area corridor, including replacement/rectification of damaged

Item No. 21 I-AH-2501-01 Basement floor 6.97 Sq.M. 650

members, as required, and providing all necessary materials, labour,

and equipment, complete (as per site condition)

Providing and installation of Plywood plament with 1mm laminate on

Item No. 22 I-AH-2501-01 Basement floor all side (6'6" x 2' x 3") for 1.5 ton splite Ac in bank locker waiting area. 1.21 Sq.M. 3295

As indicated in the drawing

Safely remove and refix the same exiting telephone black granite on all

Basement floor,

I-AH-2501-01 I- sides of lift door with BIOFLEX of Kerakoll including rubbing complete

Item No. 23 Banking hall first 10.36 RM 230

AH-2501-03 Granitic slab(mirror polish) 20 mm thick with all exposed edge

Demolition of exiting terrace floor (with microcement or terrazzo)

Above stair cabine,

flooring, disposal of unserviceable materials and debris with all lead

Item No. 24 Terrace Floor, 330.35 Sq.M. 340

and lift from the site with all necessary equipments and

Guest house floor,

transportation. To obtain clear slab surface for treatment.

Providing and applying chemical water proofing treatment with

cement polymer modified based waterproof compound like Tap Crete

P151 of CICO or equivalent without net in three coats in terrace

Above stair cabine, balconies and depressed portions including treatment up to 300 mm

Item No. 25 Terrace Floor, on side with (CC 1:2:4) 100X100 mm vata at corners vertical & 330.35 Sq.M. 610

Guest house floor, horizontal as per manufacturers specifications and direction of

engineer-in-charge and furnishing a guarantee bond of 10 years. (Only

plan area shall be measured, vata & treatment on joints and corner

shall not be measured separately and paid for.)

Providing and laying premium quality waterproof white ceramic tiles

size (12" x 8") for terrace. confirming to IS: 15622 of approved make

Above stair cabine, as specified laid on 20mm thick cement mortar 1:3 ( 1 cement:

Item No. 26 Terrace Floor, coarse sand) including grouting the joints with white cement and 330.35 Sq.M. 945

Guest house floor matching pigment etc. considering with material with all the lead and

lift. with slop ration of 1:80 for proper water dranage from the terrace

and balcony area.

staircares area,

Banking hall First Dismantling old aluminium windows, ventilators etc. shutters including

I-AH-2501-02 I- floor, Mezzanine chowkhats architraves, holdfasts and other attachment etc. complete

AH-2501-03 I- floor, Conference and stacking them within the premises condidering all lead and lift.

Item No. 27 230.48 Sq.M. 290

AH-2501-04 I- hall second floor, Including all necessary equipments, labor, scaffolding, etc. for removal

AH-2501-05 Guest house floor of aluminum windows from outside without disturbing exiting the

safety grills installed inside.

staircares area, Providing and fixing Fix aluminum windows of approved Jindal sections

I-AH-2501-02 I- Banking hall First (as per drawing no. 101) with anodized coating (make and finish to be

floor, Mezzanine approved by the Bank and Architect), including all necessary fittings,

floor, Conference labour, equipment, and scaffolding. Windows shall be fixed from the

hall second floor, exterior side of building without disturbing the existing safety grills

Guest house floor installed inside. Dimensions (width and height) shall be taken at site as

AH-2501-101 per actual condition, and installation shall be carried out as per typical

window drawing provided, complete in all respects.

Providing and fixing two track sliding openable aluminum (full height

Banking hall First

I-AH-2501-02 I- floor, Mezzanine 8') windows of approved Jindal sections (as per drawing no. 101) with

anodized coating (make and finish to be approved by the Bank and

AH-2501-03 I- floor, Conference

Architect), including all necessary fittings, labour, equipment, and

Item No. 29 AH-2501-04 I- hall second floor, 37.25 Sq.M. 3850

scaffolding. Windows shall be fixed without disturbing the existing

AH-2501-05 I- Guest house floor

safety grills installed inside. Dimensions (width and height) shall be

AH-2501-101 taken at site as per actual condition, and installation shall be carried

out as per typical window drawing provided, complete in all respects.

Providing and fixing two track sliding openable on top and fix window

Banking hall First in the bottom of aluminum windows of approved Jindal sections (as

I-AH-2501-02 I- floor, Mezzanine per drawing no. 101) with anodized coating (make and finish to be

AH-2501-03 I- floor, Conference approved by the Bank and Architect), including all necessary fittings,

Item No. 30 AH-2501-04 I- hall second floor, labour, equipment, and scaffolding. Windows shall be fixed without 53.45 Sq.M. 4500

AH-2501-05 I- Guest house floor disturbing the existing safety grills installed inside. Dimensions (width

AH-2501-101 and height) shall be taken at site as per actual condition, and

installation shall be carried out as per typical window drawing

provided, complete in all respects.

Providing and fixing two track sliding openable aluminum windows of

Banking hall First

I-AH-2501-02 I- floor, Mezzanine approved Jindal sections (as per drawing no. 101) with anodized

coating (make and finish to be approved by the Bank and Architect),

AH-2501-03 I- floor, Conference

including all necessary fittings, labour, equipment, and scaffolding.

Item No. 31 AH-2501-04 I- hall second floor, 23.92 Sq.ft. 3850

Windows shall be fixed without disturbing the existing safety grills

AH-2501-05 I- Guest house floor

installed inside. Dimensions (width and height) shall be taken at site as

AH-2501-101 per actual condition, and installation shall be carried out as per typical

window drawing provided, complete in all respects.

Providing and fixing glass louvered aluminum windows of approved

Banking hall First

I-AH-2501-02 I- floor, Mezzanine Jindal sections (as per drawing no. 101) with anodized coating (make

and finish to be approved by the Bank and Architect), including all

AH-2501-03 I- floor, Conference

necessary fittings, labour, equipment, and scaffolding. Windows shall

Item No. 32 AH-2501-04 I- hall second floor, 17.37 Sq.M. 3950

be fixed without disturbing the existing safety grills installed inside.

AH-2501-05 I- Guest house floor

Dimensions (width and height) shall be taken at site as per actual

AH-2501-101 condition, and installation shall be carried out as per typical window

drawing provided, complete in all respects.

Banking hall First

Providing & fixing of Bird/Pigeon net will high quality net (approved by

floor, Mezzanine

I-AH-2501-02 I- the bank with a guarantee or warranty of 5 years) with all necessary

floor, Conference

AH-2501-03 I- hooks and wire string on the all side of the opening for better

Item No. 33 hall second floor, 143.62 Sq.M. 226

AH-2501-04 I- protection. instalation at all height. Including all material, labour,

Guest house floor

AH-2501-05 transpotation, scaffolding, etc. complete as per direction of site in

Banking hall First

floor, Mezzanine

floor, Conference Applying priming coat and two coat of oil paint over existing metal

Item No. 34 hall second floor, safety grill, after all preparing of the surface by thoroughly cleaning 204.01 Sq.M. 180

Guest house floor with sand paper and necessary chemicals.

Repair and refurbishment on the overhead water tank with removal of

all tile/other material from the wall and floor surface, including

Above stair cabine disposal of unserviceable materials and debris with all lead and lift

Item No. 35 33.26 Sq.M. 240

on Terrace floor from the site with all necessary equipments and transportation. To o

btain clear surface for treatment.

Providing and applying 2 coats of mala plaster with chemical

waterproofing treatment using cement polymer modified waterproof

compound such as Tapcrete P-151 of CICO or approved equivalent,

Above stair cabine including application of glass-fiber/net reinforcement in three coats on

Item No. 36 33.26 Sq.M. 695

on Terrace floor all wall and floor surfaces of the overhead water tank, complete with

all necessary materials, equipment and labour as per site conditions

and instructions.

Providing and laying premium quality waterproof white ceramic tiles

size (12" x 8") for Overhead water tank. confirming to IS: 15622 of

approved make as specified laid on 20mm thick cement mortar 1:3 (

Above stair cabine

Item No. 37 cement: 3 coarse sand) including grouting the joints with white 33.26 Sq.M. 850

on Terrace floor

cement and matching pigment etc. on all wall and floor surface of

under ground water tank, considering with material with all the lead

Repair and refurbishment of existing 25 mm thick flush door, including

supply and installation of 1 mm thick laminate on both sides, with

Item No. 38 Terrace floor necessary surface preparation, adhesive, hardware fittings, and 3.34 Sq.M. 1950

finishing, complete with all materials, labour, equipment, and with all

leads and lifts as specified.

Supply, fabrication and fixing of MS door (single leaf) of clear size 4′-6″

× 7′-6″ (to be checked at site), fabricated from 50 × 50 mm MS box

section frame and fitted with 12 mm bright bar grill at 150 mm ×

mm (6″×6″) centres, including intermediate stiffeners / cross members

Item No. 39 Terrace floor as required, supply & fixing of all necessary hardware (hinges, tower 69.00 KG 140

bolt, aldrop, handle, lock plate etc.), necessary welding, grinding,

cleaning, one coat red-oxide primer, complete with supply, fabrication,

erection, adjustment, scaffolding, labour, tools, transport, lead & lift,

and as per site conditions.

Conference hall

Dismantling of the existing balcony roofing, comprising MS fabrication

and polycarbonate sheet covering, including ridges, hips, valleys,

floor and Guest

I-AH-2501-05 gutters, and all associated fittings. Serviceable materials shall be

Item No. 40 house floor 56.20 Sq.M. 180

I-AH-2501-105 carefully stacked for reuse, and unserviceable materials disposed of

with all leads and lifts. complete in all respects as directed including

all necessary labour, equipment, and scaffolding.

Supply, fabrication and fixing of MS box section fabricated roof using

sections of1) 80 X 40 X 3mm, 2) 50 X 50 X 3mm and 3) 25 X 25 X 2mm

Conference hall (as per typical drawing, to be verified with site conditions), including

Balcony provision of intermediate stiffeners/cross members wherever

second floor and required. The work shall also include supply and fixing of all necessary

Item No. 41 Guest house floor hardware such as metal plates, American bolts, tower bolts, aldrops, 745.00 KG 140

Balcony etc.; complete welding, grinding, surface cleaning, and application of

one coat of red-oxide primer. The item is inclusive of complete supply,

fabrication, erection, alignment/adjustment, scaffolding, labour, tools,

transportation, with all leads and lifts, executed as per site conditions

and directions of the Engineer-in-Charge.

Supply, fabrication and fixing of pre-coated galvanized iron (GI) roofing

sheets of approved make, profile and colour (approved by the bank

Conference hall and the Architect), including cutting, shaping, aligning and fixing in

Balcony position with self-drilling/self-tapping screws with EPDM washers,

second floor and complete over MS purlins. The work includes necessary overlaps,

Item No. 42 Guest house floor ridges, hips, valleys, etc. and sealants to make the roofing fully 56.20 Sq.M. 840

Balcony watertight, as per typical drwaing, site condition, specifications. The

item is inclusive of complete supply, fabrication, erection,

alignment/adjustment, scaffolding, labour, tools, transportation, with

all leads and lifts, executed as per site conditions and directions of the

Engineer-in-Charge.

Supply, fabrication and fixing of MS hollow box pipe frame in the

Banking Hall (double height area as indicated in the drawing and to be

verified at site), fabricated from 100 × 50 x 3mm MS hollow box

section with intermediate stiffeners/cross members as per approved

drawings. The work shall include cutting, welding, grinding, cleaning,

Banking hall First

Item No. 43 I-AH-2501-03 provision of all necessary hardware, erection, alignment and 351.00 KG 140

adjustment, complete with scaffolding, labour, tools, transport, lead

and lift. The surface shall be finished with one coat of red-oxide primer

and two coats of approved oil paint of shade approved by the Bank.

The work shall be executed in accordance with site conditions,

specifications, and as directed by the Engineer-in-Charge.

Repair and refurbishment of existing metal fabrication works in the

building wherever necessary, including staircases, railings, grills, doors,

windows, ventilators, gates, and other fabricated items. The work shall

comprise dismantling damaged/loose members, straightening, re-

Item No. 44 All floor welding, tightening of joints, replacement of worn-out 100.00 KG 140

sections/hardware, alignment and adjustment, grinding. The item shall

AH-2501-05 include supply of required MS sections, hardware, consumables,

scaffolding, labour, tools, transport, lead & lift, and shall be executed

as per site conditions and directions of the Engineer-in-Charge.

Demolition of existing dado tiles as indicated in the drawings (inside

the Board Room), including careful removal of tiles, mortar bedding

and backing where required. The work shall include collection and

stacking of serviceable material and disposal of all unserviceable

materials, debris and rubbish with all leads and lifts outside the site

Item No. 45 I-AH-2501-01 Basement floor 1.95 Sq.M. 420

premises, using necessary equipment, labour, tools and transportation.

After demolition, the surface shall be prepared and finished with one

coat of 12 mm thick smooth cement plaster (1:4 cement–sand mix) in

line, level and plumb.

Removal, repair, and refurbishment of existing plaster in the building

wherever necessary, including all walls, ceilings, staircases, corridors,

and other areas. The work shall include careful scraping/removal of

damaged or loose plaster, cleaning of surfaces, filling of cracks, and

preparation of the substrate for new plaster.

Item No. 46 All floor 46.45 Sq.M. 415

Executing of double coat plaster comprising of base coat 12 mm thick

cement–sand plaster (1:4) applied evenly over the prepared surface

and finishing coat 6 mm thick cement–sand plaster (1:3) applied over

the base coat to achieve a smooth, uniform, and level finish ready for

painting or other finishing.

Providing and applying 1 coat of primer and 3 coats of interior paint of

Basement floor,

I-AH-2501-01 I- approved make (approved by the bank and the architect) after all

Mezzanine floor,

Item No. 47 AH-2501-04 I- preparing of the surface by 167.22 Sq.M. 315

Conference hall

AH-2501-05 throughly cleaning with sand paper removing old paint and finsihing

wall surface with putty if necessary

Banking hall First Providing and fixing Aluminium Composite Panel (ACP) cladding in

floor, Mezzanine drainage duct area and service duck area, suitable for external weather

floor, Conference conditions, using 3 mm / 4 mm thick ACP sheets of approved make,

Item No. 48 hall second floor, shade and finish, fixed on aluminium framing with necessary cleats, 38.55 Sq.M. 3250

Guest house floor fasteners, weather sealant, and accessories, complete in all respects

AH-2501-05 including scaffolding, labour, materials, equipment, and disposal of

debris, all as directed by the Engineer-in-Charge.

Demolition of existing parapet wall and metal railing at the balcony of

the Conference Hall floor as indicated in the drawings. The work shall

include careful dismantling, breaking, and removal of the parapet wall

and metal railing, along with collection, stacking of serviceable

Conference hall

materials (if any), and disposal of all unserviceable materials and

Item No. 49 I-AH-2501-05 second floor Level 7.51 CBM 1150

debris from the site with all necessary leads and lifts.The work shall be

carried out using appropriate tools, equipment, and labour, ensuring

safety and protection of adjacent finishes and structures, as directed

by the Engineer-in-Charge.

Demolition of exiting balcony floor tiles and entrance lobby floor tiles,

disposal of unserviceable materials and debris with all lead and lift

Conference hall from the site with all necessary equipments and transportation. To

Item No. 50 I-AH-2501-05 second floor Level obtain clear slab surface for treatment. The work shall be carried out 45.34 Sq.M. 340

plan using appropriate tools, equipment, and labour, ensuring safety and

protection of adjacent finishes and structures

Providing and applying chemical water proofing treatment with

cement polymer modified based waterproof compound like Tap Crete

P151 of CICO or equivalent without net in three coats in terrace

Conference hall balconies and depressed portions including treatment up to 300 mm

Item No. 51 I-AH-2501-05 second floor Level on side with (CC 1:2:4) 100X100 mm vata at corners vertical & 40.13 Sq.M. 650

plan horizontal as per manufacturers specifications and direction of

engineer-in-charge and furnishing a guarantee bond of 10 years. (Only

plan area shall be measured, vata & treatment on joints and corner

shall not be measured separately and paid for.)

Providing and laying premium vitrified tiles of 8–10 mm thickness and

size 600 × 600 mm (24″ × 24″) of approved make, shade, and finish

(approved by bank and the Architect). Tiles shall be laid over 20 mm

thick cement mortar (1:3) with proper leveling, alignment, and

Conference hall adequate slope in balconies for water drainage as per site conditions.

Item No. 52 I-AH-2501-05 second floor Level Joints shall be grouted with white cement and matching pigment for a 45.34 Sq.M. 1400

plan neat and uniform finish. The work includes surface preparation,

cutting, fitting, finishing, cleaning, and disposal of debris, along with all

labour, materials, tools, transportation, lead, and lift, executed as

directed by the Engineer-in-Charge.

Supply and installation of 10 mm thick toughened glass railing with SS-

304 handrail along with all necessary accessories, clamps, brackets,

and fittings as per approved drawings. The railing shall be fixed on a 6″

wide granite pedestal, secured with chemical adhesive of approved

Conference hall make (such as Kerakoll or K2). The work includes civil preparation,

Item No. 53 second floor Level proper leveling, finishing, and installation of glass panels with stainless 17.68 RM 5100

AH-2501-105 steel clamps or channels, along with the SS-304 handrail fixed on top.

The scope also covers supply of all materials, accessories, labour,

scaffolding, tools, transportation, lead & lift. executed as per site

conditions and directions of the Engineer-in-Charge.

Dismentalling existing M.S. railling and Providing & fixing new

Item No. 54 I-AH-2501-02 grade S.S. Railling. (Market rate) 9.14 RM 3000

Parking Level plan

Repair and refurbishment of basement bathroom with removal of all

tile/other material from the wall and floor surface, including disposal

Item No. 55 Basement floor of unserviceable materials and debris with all lead and lift from the 21.62 Sq.M. 225

site with all necessary equipment's and transportation. To obtain clear

surface for treatment.

Providing and applying 2 coats of mala plaster with chemical

waterproofing treatment using cement polymer modified waterproof

compound such as Tapcrete P-151 of CICO or approved equivalent,

I-AH-2501-01 I- including application of glass-fiber/net reinforcement in three coats on

Item No. 56 Basement floor 22.57 Sq.M. 695

AH-2502-201 all wall and floor surfaces of the bathroom, complete with all

necessary materials, equipment and labour as per site conditions and

Providing and fixing white urinal (CERA Cat. No. S4020112) with all

fittings, fixtures, and plumbing materials, including supply and

installation of Jaquar flushing valve (Model PRS-CHR-077) with

I-AH-2501-01 I- installation box and control cock and bottle trao. All connections shall

Item No. 57 Basement floor 1.00 unit 16000

AH-2502-201 be leak-proof and tested under working pressure. Repairing and

making good disturbed surfaces to match existing finish complete as

per manufacturer’s specifications and directions of the Engineer-in-

Supplying and fixing CERA Corren wall-hung wash basin with built-in

counter on right (Cat. No. S2030109), including approved waste

coupling, bottle trap, necessary CPVC/UPVC plumbing fittings,

Item No. 58 Basement floor brackets/fasteners, and all fixtures required for proper installation. 1.00 unit 10000

The work shall include connecting to existing water supply and waste

line, sealing joints, testing for leak-proof performance, as directed by

the Engineer-in-Charge.

Providing and fixing pillar cock of Jaquar make, Model OPP-CHR-

15001PM, including all necessary fittings such as flexible connection

pipe, approved stopcock/angle valve below the counter, and required

Item No. 59 Basement floor accessories for proper installation. The work shall include fixing, 1.00 unit 4500

connecting to existing water supply, ensuring leak-proof joints, testing,

and making good any disturbed surfaces, complete as directed by the

Engineer-in-Charge.

Supplying and fixing CERA wall-hung WC, Casper model (Cat. No.

S1044173), including supply and installation of Jaquar Metropole Flush

Valve (Model: FLV-CHR-1095NSQ) in chrome finish, complete with all

required CPVC/UPVC plumbing fittings, brackets, fasteners, and

Item No. 60 Basement floor installation accessories. The work includes proper mounting and 1.00 unit 27500

alignment of the WC, connection to the existing water supply and

waste line, sealing of all joints, and testing the system for leak-proof

performance. All work shall be carried out as per manufacturer’s

specifications and the directions of the Engineer-in-Charge.

Providing and fixing ISI-marked Nahani Trap of approved make, with

minimum 75 mm water seal and C.P./SS grating, including all fittings,

I-AH-2501-01 I- cutting and preparing floor, fixing in cement mortar, connecting to

Item No. 61 Basement floor 1.00 unit 2000

AH-2502-201 waste/SWR pipe, making all joints leak-proof, testing, and restoring

the floor finish. Complete with all materials, labour, and tools as

directed by the Engineer-in-Charge

Providing and fixing a health faucet of approved make and quality,

including a flexible hose (minimum 1.0 meter), wall hook/holder, and

all necessary fittings. The work shall include complete plumbing with

I-AH-2501-01 I- CPVC/UPVC pipes, connection to an angle valve/stopcock (supply and

Item No. 62 Basement floor 1.00 unit 2600

AH-2502-201 installation), ensuring proper water flow, leak-proof joints, and secure

fixing. All materials, labour, tools, and testing shall be included, and

the work shall be carried out in accordance with manufacturer’s

specifications and the directions of the Engineer-in-Charge.

Providing and laying premium quality vitrified anti-skid floor tiles of

size 600 × 600 mm (VERMORA or approved equivalent), conforming to

IS:15622, in specified colours and shades. The tiles shall be laid over a

20 mm thick cement mortar bed in proportion 1:3 (1 cement : 3 coarse

I-AH-2501-01 I- sand), properly leveled and aligned. Necessary slope shall be provided

Item No. 63 Basement floor 3.59 Sq.M. 1400

AH-2502-201 in the flooring to ensure smooth water flow towards the nahani trap

(NT). Joints shall be filled with white cement mixed with matching

pigments to obtain a uniform finish. The work shall be carried out as

per manufacturer’s specifications, architect’s drawings, and the

direction of the Engineer-in-Charge, complete in all respects.

Providing and laying premium quality vitrified tiles (300 x 600) for

Dado as per approved design of VERMORA and confirming to IS:

Item No. 64 Basement floor 15622 of approved make in colours and shades as specified laid on 22.60 Sq.M. 1200

20m thick cement mortar 1:3 ( 1 cement: 3 coarse sand) including

grouting the joints with white cement and matching pigment etc.

IN WORDS : THIRTY FOUR LAKH TY FORTY FIVE THOUSAND NINE HUNDRED AND FOURTEEN ONLY

I/We _________________________________________________ am/are willing to carry out the above work at ___________________ % above/below ___________________

percent (should be written in figures and words) of the estimated rate mention above estimated amount of my/ours tender work out as under.

ESTIMATED AMOUNT PUT TO TENDER

Total Amount Rs. ________________________

Total Amount Rs. ________________________

SIGNATURE OF THE BIDDER