Supply Installation Testing and Commissioning of fire fighting and fire alarm system for New Godown at State warehouse Mavelikkara in Alappuzha District under NABARD-WIF Scheme

Amount

Main Fire Pump Supply,Installation,Testing & Commissioning of Horizontal, End suction, Top Discharge Back Pull out Design Centrifugal pump with standard construction with CAST IRON impeller with Gland Rope Packing arrangement coupled to squirrel cage, TEFC motor with GI Fabricated channel Base plate, Standard Lovejoy Coupling, GI Coupling Guard, Anti Vibration Pad Inclusive.1620 LPM @ 50 Mtr head. 30 HP , 2900 RPM ( Concreate Foundation for the fire pump under contractor's scope. ) Pump Classification: Fire Pump Casing Material: Cast Iron FG 260 Impeller Material: Cast Iron FG 260 Shaft Material: Carbon Steel Shaft Sleeve Material: S.S AISI 410 Counter Flange Material: Cast Iron Suction & Discharge Flange Rating: PN 16

Stand By Deseal Pump Supply,Installation,Testing & Commissioning of horizontal, end suction, top discharge centrifugal pump of standard Construction with BRONZE Impeller GLAND ROPE PACKING ARRANGEMENT coupled to electric start, water cooled, Radiator type diesel oil engine with GI fabricated channel base plate, Standard coupling, GI Coupling guard with batteries, leads and fuel tank .Anti Vibration pads inclusive.1620 LPM @ 50 Mtr head. 51 HP , 1800 RPM ( Concreate Foundation for the fire pump under contractor's scope. ) Pump Classification: Fire Pump Pump Construction: Pump With Diesel Engine Component Materials Casing Material: Cast Iron FG 260 Impeller Material: Bronze LTB2 Shaft Material: S.S AISI 410 Accessories Base Frame & Coupling: Included, Battery, Diesel Tank, Presssure Gauge, Battery Charger. Suction & Discharge Flange Rating: PN 16

Jockey Pump Supply,Installation,Testing & Commissioning of CENTRIFUGAL MONOBLOCK PUMP suitable for AC 3 Phase/415 Volts/50 Hz supply. Pump is of CI construction, CAST IRON Impeller, GLAND PACKED . Totally enclosed fan ventilated motor is capable of withstanding wide voltage fluctuation ranging from 300 to 440 volts.Anti Vibration pads inclusive 180 LPM @ 50 Mtr head , 7.5 HP ( Concrete Foundation for the fire pump under contractor's scope. ) Pump Classification: Fire Pump Casing Material: Cast Iron FG 260 Impeller Material: CF8 Shaft Material: Carbon Steel Shaft Sleeve Material: S.S AISI 410 Suction & Discharge Flange Rating: PN 16

Terrace Pump Supply,Installation,Testing & Commissioning of CENTRIFUGAL MONOBLOCK PUMP suitable for AC 3 Phase/415 Volts/50 Hz supply. Pump is of CI construction, CAST IRON Impeller, GLAND PACKED . Totally enclosed fan ventilated motor is capable of withstanding wide voltage fluctuation ranging from 300 to 440 volts. 450 lpm @ 35 mtr head , 7.5 HP (Concrete Foundation for the fire pump under client's scope) Product Configuration Pump Classification: Fire Pump Component Materials Volute Material: Cast Iron Impeller Material: Cast Iron Shaft Material: Carbon Steel

Control Panel - PUMP Supply, fabrication, erection, testing and commissioning of the following floor mounted free standing cubicle type fully compartmentalised dust tight, vermin proof panel boards fabricated out of 16 SWG GI sheet and powder coated as per standards. The Board shall be completed with phase indication lamps in the incoming, suitably rated TPN Aluminium Busbars & earth bus of adequate capacity, double earth connection to all switches, internal rigid connection etc. (30HP S/D / 51HP Diesel Engine / 7.5HP DOL Jockey pump. (The necessary foundation suitable for cable entry, incoming power cable up to panel shall be provided by client and cabling between control panel and pumps sets shall be provided by contractor) Incoming: 125A TPN Isolator - 1No. TPN Busbar as per ISS RYB indicator set with control fuses - 1set Multifunction Meter with control fuses - 1set 100/5A CL1 CT - 3Nos Auto-Manual Switch - 3Nos. Outgoing: 63A TPN Isolator with S/D starter, push buttons for 30 HP motor - 1set

Supply,Installation,Testing & Commissioning of 3 core X 10 sq.mm Aluminium armoured cable 1.1 KV for Jockey & Terrace Pumps. ( Including accessories & termination )

Supply,Installation,Testing & Commissioning of 3.5 core X 25 sq.mm Aluminium armoured cable 1.1 KV for Main Pump. ( Including accessories & termination )

Supply,Installation,Testing & Commissioning of 150mm GI cable tray for cabling in the fire pump room.

Earthing for entire installation complying to IS 3043. (confirm to IEC/IS 62305)-25x3mm cu strip

Earthing for entire installation complying to IS 3043. (confirm to IEC/IS 62305)- 4 SWG bare Cu

Earthing for entire installation complying to IS 3043. (confirm to IEC/IS 62305)- 10 SWG bare Cu

Fire alarm Cable (For pumps automation) Supply, Installation,Testing & Commissioning of 1C x1sq.mm Copper wire. ISI marked

PVC Conduit (For pumps automation) Supply,Installation,Testing & Commissioning of 20 mm dia medium grade rigid PVC conduit ISI mark with elbow, tees, jn:boxes, saddle clip and with necessary fittings.

Control Panel - TERRACE PUMP Supply,Installation,Testing & Commissioning of 7.5HP Booster pump panel with auto manual operation. DOL starter with require facitily to connect the Pressure Gauge, Pressure switch. etc to maintain required the line pressure.

Above Ground Piping Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer & two coats of signal red paint 150 mm dia.

Above Ground Piping Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer & two coats of signal red paint 100 mm dia.

Above Ground Piping Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer & two coats of signal red paint 80 mm dia.

Above Ground Piping Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer & two coats of signal red paint 65 mm dia.

Above Ground Piping Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer & two coats of signal red paint 50 mm dia.

Above Ground Piping Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer & two coats of signal red paint 40 mm dia.

Above Ground Piping Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer & two coats of signal red paint 32 mm dia.

Above Ground Piping Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer & two coats of signal red paint 25 mm dia.

Above Ground Piping Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer & two coats of signal red paint 50mm dia ( For Drain Line)

Under Ground Piping Supply,Installation,Testing & Commissioning of under ground piping GI pipe Class 'B' and piping shall have anti corrossive wrapping and coating treatment. (The cost of excavation & backfilling if necessary will be contractor's scope) 150 mm dia

Under Ground Piping Supply,Installation,Testing & Commissioning of under ground piping GI pipe Class 'B' and piping shall have anti corrossive wrapping and coating treatment. (The cost of excavation & backfilling if necessary will be contractor's scope) 100 mm dia

Butterfly Valve Supply,Installation,Testing & Commissioning of butterfly valve wafer type SG Iron disc & body , lever operated as per IS:13095 in PN 16 , teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark 150 mm dia.

Butterfly Valve Supply,Installation,Testing & Commissioning of butterfly valve wafer type SG Iron disc & body , lever operated as per IS:13095 in PN 16 , teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark 100 mm dia.

Butterfly Valve Supply,Installation,Testing & Commissioning of butterfly valve wafer type SG Iron disc & body , lever operated as per IS:13095 in PN 16 , teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark 80 mm dia.

Butterfly Valve Supply,Installation,Testing & Commissioning of butterfly valve wafer type SG Iron disc & body , lever operated as per IS:13095 in PN 16 , teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark 50 mm dia (For drain line)

Non Return Valve Supply,Installation,Testing & Commissioning of Non Return Valve wafer type swing check valve, short pattern type with integral hinge pin disc , nitrile rubber O - ring seat and face sealing as per IS: 5312 PN 16, with ISI mark 150 mm dia.

Non Return Valve Supply,Installation,Testing & Commissioning of Non Return Valve wafer type swing check valve, short pattern type with integral hinge pin disc , nitrilerubber O - ring seat and face sealing as per IS: 5312 PN 16, with ISI mark 100 mm dia.

Non Return Valve Supply,Installation,Testing & Commissioning of Non Return Valve wafer type swing check valve, short pattern type with integral hinge pin disc , nitrilerubber O - ring seat and face sealing as per IS: 5312 PN 16, with ISI mark 80 mm dia.

Ball Valve Supply,Installation,Testing & Commissioning of Forged brass Ball Valve cast iron body as per IS 5312 with ISI mark 25 mm dia.

Sprinkler Supply,Installation,Testing & Commissioning of sprinkler 15 mm , 1/2" BSPT end connection having temperature 68 degree C made out of forged brass and SS decorative finish with temperature sensing tube, pressure with standing minimum 8 kg/cm2 , UL listed- Pendent type

Pressure Switch Supply,Installation,Testing & Commissioning of pressure switch having 1/4" BSP (F) connection IP:32 enclosure protection, pressure range 0 to 200 psi with necessary contact

Pressure Guage Supply,Installation,Testing & Commissioning Of Pressure Gauge, 4" SS Pressure Gauge 0.To 16kg Cm Glycerin Filled 1/2" Bsp Male Bottoms Connection Including Fittings Etc.

Air Release Valve Supply,Installation,Testing & Commissioning of Air release valve gun metal body 25 mm dia

Air Vessel Supply,Installation,Testing & Commissioning of Air cushion vessel made of GI sheet 200 mm dia in 1 mtr height, with automaic air release cock, 25 mm drain valve and shutt off with all necessary attachments.

Strainer Supply,Installation,Testing & Commissioning of 150 mm CI Strainer For safer operation of pump150 mm dia

Plumbing Pipe Details Providing & fixing PVC pipes fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes,ball valves & fittings with one step PVC solvent cement and testing of joints complete as per direction of engineer in charge. 40 mm dia 6Kgf/cm2

Pump Centrifugal pump(high head) with all accessories, electrical connections with power switch, foundation etc. for Fire Tank Filling complete as per the instruction of the Engineer in charge- 0.5 HP Kirloskar Pump

PIPING & RELATED ACCESSORIES- Hydrant Valve Supply,Installation,Testing & Commissioning Hydrant Valve- Single Headed, S.S -as per IS: 5290 , ISI Marked oblique pattern Hydrant Landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with pvc blank cap & chain .

Fire Hose Supply,Installation,Testing & Commissioning of Fire Fighting Hose , Fire Hose - 63 mm ( 2 1/2") dia , 15 mtrs length bearing IS;636 type A with ISI Marked duly bounded with S.S couplings, 63 mm size, pair of male & female parts, instantaneous type , heavy duty bearing IS:903 with ISI mark.

Hose Reel Supply,Installation,Testing & Commissioning of Hose reel drum made of Mild Steel, Hose Reel Drum - as per IS:884 with 30 mtr length rubber hose of working pressure 7 kg/cm2 and shutt off nozzle range of jet flow 24 ltr/min, range of jet throw 6 mtrs with ISI mark.

Branch Pipe Supply,Installation,Testing & Commissioning of Branch Pipe- S.S 63 mm dia short size branch pipe with 20 mm dia bore nozzle , as per IS:903 with -ISI Marked

Hose Box Supply,Installation,Testing & Commissioning of Hose Box (cabinet) to accommodate one piece of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pipe. The cabinet is made of Fibre sheet with glass fronted hinged doors and lock.

Fire Brigade Connection Supply,Installation,Testing & Commissioning of Fire brigade Inlet connection fabricated from 150 mm dia GI Class B medium grade pipe comprising of four 63 mm dia gun metal male threaded non return valve. ( 4 Way )

Tank Filling Inlet Supply,Installation,Testing & Commissioning of Fire brigade Inlet connection for tank filling fabricated from 150 mm dia GI Class B medium grade pipe comprising of three 63 mm dia gun metal male threaded non return valve.( 2 Way for tank filling )

Draw out Connection Supply,Installation,Testing & Commissioning of Draw out connection with 2 nos of gunmetal 63 mm dia built in gunmetal non return valves instantaneous coupling type arranged on 100 dia etc , pipe manifold shall be connected to UG Sump.

Flow Switch Supply,Installation,Testing & Commissioning of 100 mm dia Flow Switch vane type IP 65 protection 20 bar working pressure with all necessary accessories for monitoring fire sprinkler system. The control cabling from flow switches to fire alarm panel shall be measured seperately.

EQUIPMENTS & ACCESSORIES FOR HYDRANT SYSTEM Fire Extinguisher Supply,Installation,Testing & Commissioning of Fire Extinguisher dry chemical powder (ABC) Stored pressure type 4 kg capacity as per IS:15683 with ISI mark and with initial charger and installation brackets.

Fire Extinguisher Carbon Di-oxide Type Supply,Installation,Testing & Commissioning of 4.5kgs. Carbon Di-oxide Type, Gas Conforming to ‘IS 15222’, Cylinder Conforming to ‘IS 7285’ & PESO Approved, Controllable Discharge Mechanism, Discharge Hose & Horn, as per ‘IS 15683:2018’ with ISI Mark Fire Extinguishers Wheel type Valve Operating Temperature:- (-) 20oC to (+) 60oC

FIRE EXTINGUISHERS Fire Alarm Control Panel Supply,Installation,Testing & Commissioning of 4 zone Automatic Fire Alarm Control panel conventional type micro processor based control made of MS sheet cabinet the powder coated, audio and digital visual display, circuit open short functions, test/evacvation mode, silence and reset options, common and zone wise hooter supply outputs, fault and fire mode auxilary contacts with 24 DC volt out put zone circuits, operating 230 / 50 Hz AC volts.

Manual Call Point Supply,Installation,Testing & Commissioning of Manual Call Point break glass type red colour powder coated MS/ABS box fix on existing wall /frame,24/12 Volt DC operated push OFF/ON switching mechanisam with inner, outer frame, operation label and necessary attachments.

Hooter Supply,Installation,Testing & Commissioning of Audio alarm hooter ( sounder ) powder coated MS/ABS box fix on existing wall/frame, 24/12 Volt DC operated siren circuit with diaphram speaker, maximum sound 60 db intensity under statutory with necessary attachments.

Battery Supply,Installation,Testing & Commissioning of Sealed Lead Acid Battery 12 V DC x 7 Ah for fire alarm control panel.

Fire alarm Wire Supply,Installation,Testing & Commissioning of FRLS Fire Alarm Cable - armoured 2 c X 1.5 sq.mm with ISI mark.

Detector Supply,Installation,Testing & Commissioning of Optical type UL Listed with solid state design detector with imported base- Smoke Detector

SIGNAGES - Led type Supplying and installing in position LED "EXIT" sign boards of with battery backup.

SIGNAGES - Led type Supplying and installing in position LED "Fire EXIT" sign boards of with battery backup.

SIGNAGES - Led type Cabling charges for LED Signages under contractors scope

SIGNAGES - Self glow type Supplying and installing in position of self glowing "FIRE DUCT" sign board of size 100mm x 300 mm made of luminescent safely, rigid sheet in green colour, photo luminescent rigid sheet with two each hanging chains & necessarry supports to hang it on ceiling.

SIGNAGES Self glow type Supplying and installing in position of self glowing "FIRE PUMP ROOM" sign board of size 100mm x 300 mm made of luminescent safely, rigid sheet in green colour, photo luminescent rigid sheet with two each hanging chains & necessarry supports to hang it on ceiling.

FIRE EVACUATION PLAN Supply & installing in position laminated sheet of "FIRE EVACUATION PLAN " of suitable size fixed on wall & necessarry accessories to fix the plan on wall.

SIGNAGES- STATUTORY CHARGES Preparation of necessary documents , forms,drawings, scheme , certificate etc.Preparation of AS built drawings. Procuring approvals for the drawings, cordinating site inspection and statutory sanctions from the state fire authority for the installation.(Fee for challan not including.)

AMC CHARGES Annual Maintenance Contract for three years( minimum 4 visit /Year) for all equipements and entire Fire fighting & fire alarm System including renewal of FINAL NOC . AMC charges are payable at the end of every year against the GST bill submitted by the contractor and after reviewing the perfomance of the contractor .The amount for this item shall not exceed 5% of total quoted amount.

Aag India Private Limited

USHA FIRE TECH