Construction of Additional School Building at Govt. Senior Secondary School Dehra Distt. Kangra H.P Construction of Civil Work including Water Supply and Sanitary Installation Rain Water Harvesting System Under Ground Water tank and Septic Tank with

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as per direction of Engineer-in-Charge and returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all excavated earth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Treatment of soil under floors using chemical emulsion @ one litre per hole, 300mm (Three hundred millimetre) apart including drilling 12mm (Twelve millimetre) diameter holes and plugging with cement mortar 1 :2 (One cement isto two Coarse sand) to match the existing floor : With Chlorpyriphos/ Lindane E.C. 20% (Twenty percent) with 1% (One Percent) concentration complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position cement concrete 1:4:8 (One cement isto four coarse sand isto eight graded stone aggregate 20mm (Twenty millimetre) nominal size mechanically mixed and vibrated of specified grade excluding the cost of centering and shuttering, in foundation and plinth including carriage of materials in all leads and lift as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying damp proof course 100mm (One hundred millimeters) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (Twelve decimal five millimeter) nominal size) and curing complete including cost of form work as required at site or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.

Providing and laying mechnically mixed and vibrated plain cement concrete 1:2:4 (One cement isto two coarse sand isto four graded stone aggregate 40mm (Forty millimetre nominal size) and curing complete excluding cost of form work in foundation and plinth complete as per architectural drawing including carriage of materials in all leads and lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (M-Thirty) design mix to obtain the compressive strength of 30N/mm Square (Thirty newton per square millimetre) for reinforced cement concrete work, using minimum cement content not less that 360 Kg/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix for the work upto plinth level to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability complete including carriage of material within all leads, lifts and other incitental as per specification approved drawing design and as per directed by the Engineer-in-charge.The rate inclusive Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (M-Thirty) design mix to obtain the compressive strength of 30N/mm Square (Thirty newton per square millimetre) for reinforced cement concrete work, using minimum cement content not less that 360 Kg/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix for all work above plinth level to all floor level to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability complete including carriage of material within all leads, lifts and other incitental as per specification approved drawing design and as per directed by the Engineer-in-charge.The rate inclusive Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing tor steel reinforcement of Jindal Panther/ Tata/Sail for Reinforced Cement Concrete work including straightening, cutting, bending, placing in position and binding all complete upto all floor level Thermo-Mechanically Treated bars of grade Fe-550D or more etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.