CERTAIN MISC REPAIRS OF OFFRS MD ACCN IN USNS, LSNS UNDER AGE B/R-II AT YOL MIL STN

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site, complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm not exc. 2 Sqm each and removing from site, complete all as specified and directed.

Taking down shutters of any description not exc. 1 Sqm each and removing from site, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting of any gauge ,thickness as in roof covering complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Mild steel Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc to Fe 290 Gde-E-165. complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; flat iron for framing grills, framework of water tanks and similar work conforming to Fe.290. Gde-E-165, all as specified.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, complete all as specified and directed.

Aluminium anodized snap grid frame work of size 605 mm x 605 mm as in false ceiling, flat or sloping (pattern as per manufacturer's catalogue/instruction), cutting holes for electrical fittings fixed on an including aluminium tee of size 25mmx25mmx1.50mm as main runner, aluminium tee of size 25mmx25mmx1.25mm as cross runner and aluminium angle of size 25mmx25mmx1.25mm at the perimeter suspended from soffit at approx 900mm centre to centre with hangers 6mm dia galvanized (length as per site requirement) adjusting level fixed to roof by means of ceiling cleats made out of galvanized iron flat 40mmx3mm size, 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including necessary scaffolding, complete all as specified and directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section, framed or unframed work, complete all as specified and directed.

Second class hardwood Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exc 13 & n. exc 25 sqcm, complete all as specified and directed.

Dismantling boarding, any discription fixed in any postion with nails, complete all as specified and directed.

S&F HDHMR board 18/19mm thick exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination and fixed with screws to timber frame work as on wall panelling cup boards shutters (sliding or fixed), complete all as specified and directed.

S&F 18/19mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber frame-work, complete all as specified and directed.

Demolition of stone or brick masonry, built in cement mortar including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc., complete, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.

Fly ash brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.

Disconnecting existing tanks and removing to store water tanks of capacity n.exc 500 ltr, complete all as specified and directed.

Disconnecting existing tanks and removing to store water tanks of capacity 500 to 1000 ltr, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level), complete, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.

Plain cement concrete M-15, nominal mix, type B-0, using 12.5mm graded mechanically crushed stone aggregate as in floors, 25mm thick, surface finished even and fair to receive top surface, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, complete, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.

Granite (of any type) 18mm to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in kitchen platform, window cill /steps laid over and including 15mm thick screed bed in cement mortar (1:6), complete all as specified and directed.

itemH1Code31

Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 7mm to 8mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.

Glazed coloured tiles of size 350x250/450x300x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed.

Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.

Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) on other than fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.

Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) on fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement with WPC, complete all as specified and directed. Note :- water proofing compound shall be measured and paid separately

Rendering cement plaster 5mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of 2 mm thick wall care putty preparatory to distempering complete, all as specified and directed.

Three coats of white wash on newly plastered or previously undecorated surfaces of ceiling including preparation of surfaces, complete all as specified and directed.

Supply only liquid water proofing compound (ISI marked) or of approved brand all as specified and directed.

Three coats of white wash on newly plastered or previously undecorated surfaces of wall including preparation of surfaces, complete all as specified and directed.

Pressed steel frames of size 105x60x1.25mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

Pressed steel frames of size 125x60x1.25mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 with using 12.5mm graded stone aggregate as in bed block, bed plates etc. For embedding hold fasts etc. complete all as specified and directed.

Factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 160 of MES SSR 2010 Part-II, complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of 5 mm thick plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, Sheet No 1/1), complete all as specified and directed.

PCC M-15, nominal mix, B-0 using 12.50mm graded mechanically crushed stone aggregate as, in lintels up to 1.5 metre clear span cuts, steps seismic and other similar bends, coping, bands plates for serving hold fasts etc. and the like including weathering slighting rounded or chamfered angles and throating, complete all as specified and directed. Note:- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.

Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads, fixed in repairs, complete all as specified and directed.

Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads and removing from site, complete all as specified and directed.

Sheet glass 4mm thick ordinary quality and glazing with oil putty wooden beads in squares, not exc. 0.5 sqm in each pane, complete all as specified and directed.

Figured glass, pin head type 4mm thick and glazing with oil putty/ wooden beads in squares, not exc. 0.5 sqm in each pane, complete all as specified and directed.

Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 150mm, fixed, complete all as specified and directed.

Extruded aluminium alloy handles, (ISI marked), fabricated type, anodised, of size 150mm, complete all as specified and directed.

Butt hinges (ISI marked), medium weight, cold rolled, stainless steel 100mm long, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm with lipping frame to match, complete all as specified and directed.

Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 100mm, fixed, complete all as specified and directed.

Extruded aluminium alloy handles, (ISI marked), fabricated type, anodised, of size 100mm, complete all as specified and directed.

Butt hinges, (ISI marked), medium weight, cold rolled, stainless steel 75mm long, complete all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel or steel based surfaces of any description, exceeding 10cm width or girth including preparation of surfaces, complete all as specified and directed.

Vitreous China wash down water closet (pedestal pattern), coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends, fixed complete, including PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handle with brackets with including 32mm dia PVC long bend flush pipe 90cm long pipe, fixed in repair, complete all as specified and directed.

32mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/Sqcm fixe to wall etc including short lengths, with all pipe fittings such as ends, elbows, unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good, complete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.

Chromium plated brass over head shower rose, 150mmx150mm size, square shape, single flow with rubit cleaning system, fixed in repair, complete all as specified and directed. Make:- Cat Part No OHS-CHR-35495 of Jaquar or equivalent make mentioned in Appx 'C'.

Stop valve, cast copper alloy, fancy type chromium plated, with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repair, complete all as specified and directed. Make:- Cat Part No CON-083KN/CON-089KN of Jaquar or equivalent make mentioned in Appx 'C'.

itemH1Code80

15mm bore, Brass, chromium plated wall Mixer With hand shower for mixing hot or cold water, screwed for iron pipe, fixed in repair, complete all as specified and directed. Make:- Cat Part No FUS-29267 of Jaquar or equivalent make mentioned in Appx 'C'.

Chromium Plated, toilet Paper Holder of stailess stell with rod and Flap, fixed in poistion with chromium plated (CP) brass screws, fixed in repair, complete all as specified and directed.

Brass Chromium Plated, tubular towel rail, 19mm dia, D type, 60cm long between flanges, with brackets, fixed with chromium plated screws, fixed in repair, complete all as specified and directed.

Soap dish, chromium plated, fixed to plugs with chromium plated, brass screws and fixed in repair, complete all as specified and directed. Make:- Cat Part No CAN-1137N of Jaquar or equivalent make mentioned in Appx 'C'.

Waste coupling (half or full threaded) (minimum wt 32mm-45gms), complete all as specified and directed.

PVC connection 15mm size with PTMT nuts at boths end 600mm long and fixed in repair, complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed with chromium plated brass screws, complete all as specified and directed. Make:- Cat Part No ACN-1173N of Jaquar or equivalent make mentioned in Appx 'C'.

itemH1Code89

Metal finish fancy type curtain rod 25mm dia including brackets, globes, cleats, fixed to walls, fixed in repair, complete all as specified and directed.

Brass Chromium Plated, tubular towel rail, 60cm long without lower hangers, fixed in repair, complete all as specified and directed. Make:- Cat Part No CAN-1181FHN of Jaquar or equivalent make.

20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified and directed.

20mm bore Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions including 1 No. 20mm union cutting, threading existing GI pipe at a level of 1.8m, and fixed in repairs complete, complete all as specified and directed.

PVC (SWR) bends any radius, 75mm bore jointed with solvent cement and fitted with oval access door, complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal, 110mm bore, provided with oval access door, complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore, provided with oval access door, complete all as specified and directed.

PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm, fixed in repair, complete all as specified and directed.

Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including 40mm dia waste pipe & CP waste coupling, overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm, fixed in repair, complete all as specified and directed.

Sink without drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including 40mm dia waste pipe & CP waste coupling, overall size 495mm x 460mm bowl size 410mm x 330mm x 160 mm, fixed in repair, complete all as specified and directed.

40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed.

Aluminium handles (ISI marked), cast type, anodised of size 75mm, complete all as specified and directed.

Hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws of size 125mm, complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 30mm, complete all as specified and directed.

Mortice lock, brass, vertical type, size 100 mm, 4 lever, fixed into aluminium door shutter, complete all as specified and directed.

Sheet glass 5.5mm thick ordinary quality and glazing with glazing clips, ruber neoprene packing, aluminium beads in squares, not exc. 0.5sqm in each pane, complete all as specified and directed.

Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair, complete all as specified and directed.

Aluminium (diecast) body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair, complete all as specified and directed.

Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/down facia/soffits and fins of RCC chajjas/beams/columns/balconies etc. Supply and fixing by means of nailing wire netting of galvanised wire 1.40mm dia and mesh size 20mm and brushing neat cement slury with 3.00 Kg of cement/sqm and M&L for 20mm thick cement rendering in two layers of 10mm each (top/final layer shall be rendered after final setting of under layer) in Cm 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs ect, complete all as specified and directed.

Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x 35mm double rebated comprises gauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No's for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including 10mm square MS grill and following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf. (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 26/13. Make : As per Appendix 'C'. Note:- (i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day.

S & F for telescopic channel, 1mm thick, 60 cm long, fixed to wooden sliding shutter of cup boards, kitchen racks/drawers etc with suitable size cadmium screws, complete all as specified and directed.

Magnet catcher with magnet for cupboards, complete all as specified and directed.

Steel plate rack of size 900mmx900mmX250mm made of stainless steel 0.60mm thick fixed with plugs,washers and steel screws including fixed in wall with screws ands PVC sleeve of required or fixing arrangement complete and fixed in repair, complete all as specified and directed.

Hand Shower (Health Faucet) (ABS Body) with 1 Meter Long easy flex in chrome finish tube and wall hook, complete all as specified and directed. Make:- Jaquar, Cera, Prayag

PVC toilet cabinet of size 350x450mm with shelf assembly including mirror mounted shutter, fixed to wall with screws etc, complete all as specified and directed. Make:- Cat Part No 551 of Prayag or equivalent make.

Jet spray stainless steel fixed in repair, complete all as specified and directed. Make:- Jaquar, Cera, Prayag

S&F 20mm dia stainless steel curtain rails with fixing and brackets, stops, rollers and fixed to walls, complete all as specified and directed.

itemH1Code126

Taking down aluminium door shutter n. exc 2 Sqm each, taking out servicable glass panes, hydraulic door clocer, but hinges, double action hydraulically regulated floor spring and other fittings, if required carefull and refixing in the same opening after repairs of unserviceable or loosened joints/cleats of top rail/bottom rails/lock rails and styles etc and fixing old serviceable glass, any thickness with rubber packing and aluminium beadings, fixing of old servicable hydraulic door closer, double action door spring duly oiling/greasing and fixing all servicable fitting complete all as directed by Engr-in-Charge. NOTE;- Unservicable door closer, double action floor spring, glass panes and other fittings etc shall be replaced and paid under separate items of schedule.

Natural colour 15 micron anodized aluminium door chowkhat with shutter of approved design complete with all fixing arrangements including providing and fixing door handles, tower bolts, hydraullic door closer and mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a) Shutter vertical member 85.00 x 44.45 x 1.80mm weighing 1.302 Kg/RM. (b) Shutter top member 83.5 x 44.45 x 1.70 mm weighing 1.243 Kg/RM. (c) Shutter bottom member 114.30 x 44.45 x 1.29mm weighing 1.139 Kg/RM. (d) Shutter lock rail 83.5x44.45x1.70mm weighing 1.243 Kg/RM. (e) Anodised aluminium handle, fancy type, 350mm long and aluminium tower bolt of size 150mm. (f) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (g) Aluminium anodised frame of door of section 101.6 x 44.45 x 1.75mm weighing 1.367 Kg/M, with flat iron hold fasts and necessary concrete in PCC M-15, type B-1 using 12.5mm graded stone aggregate to fix hold fasts all as directed. Note:- (i) Shutter shall be fixed with heavy floor spring ISI marked and pivot, brass lock with duplicate keys.

Natural colour 15 micron three track sliding anodized aluminium window chowkhat with shutter of approved design complete with all fixing arrangements including providing and fixing window handles, tower bolts, hydraullic door closer and mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a) Shutter vertical member 47.62 x 45.45 x 1.74mm weighing 0.881Kg/RM. (b) Shutter top member 47.62 x 44.45 x 1.1.14 mm weighing 0.607 Kg/RM. (c) Shutter bottom member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM. (d) Natural colour 15 micr anodised aluminium anodised frame of chowkhat of section 85x44.45x1.80mm weighing 1.302 Kg/RM, with flat iron hold fasts and necessary concrete to fix hold fasts all as directed. (e) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (f) The size of Anodised aluminium round handle, fancy type shall be 100mm dia (02 Nos) and aluminium anodised aluminium tower bolt of size 100mm (02 Nos).

itemH1Code130

Disconnecting existing PVC/ferro cement/MS tanks capacity exc. 500 litres but n. exc 1000 litres, for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and as directed by Engr-In-Charge.

itemH1Code132

S&F in repair Overhead Rain shower Panel wall mounted (Jaquar Code SHP-WHT-TMCURVENEO) or equivalent

S&F Transulant Fibre Sheet 2mm thick Fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.

S&F in repair Modular Kitchen complete all as specified below and as directed by Engr-in-Charge :-

Note :- *All measurement are to be maesured as Length x Height . However, the depth of the boxes are to be as per the specifications described above.

S&F in repair 12 mm thick toughened glass partition (with or withour opening/ door shutters with diamond polished edge, clear glass including all hardware fittings detailed as under, fixed in position as per manufacturer instructio including following fittings complete. (a) Stainless steel top patch (cat No. EPF - 701) 01 set (b) Stainless steel top pivot (cat No EPF-712) 01 set ©Stainless steeel bottom patch (Cat No EPF-702) 01 set (d) Glass to wall stainless steel lock (Cat No FH-ECO -842) 01 set (f) Stainless Steel Handle 300mm size (Cat No ESBH-011) 02 Nos for each shutter . note :- Cat No. mention above for hardware fittinga are of make ENOX, contractor may use similir type hardware fitting of make DORMA/OZONE. make of glass ATUL/MODI/GURD/SAINT GOBAIN/JINDAL/INDAL/HINDAL/WALCO

S & F 15mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair.

Door seal 40mm wide bottom carbon metal seal strip, door air Gap rubber shield, dust proof water proof with 3 Nos self tapping carbon screws all as directed by Engr in charge

摮挠灡捡瑩⁹湡⁤祴数戠⁹楤捳湯敮瑣湩⁧牦浯琠敨攠瑩敨⁲整浲湩污⁳潣灭敬整椠据畬楤杮映瑩楴杮⁳湡⁤楦瑸牵獥猠捵⁨獡猠楷捴敨ⱳ猠捯敫獴‬散汩湩⁧潲敳‬慦爠来汵瑡牯ⱳ氠浡⁰潨摬牥ⱳ挠污敢汬‬敢汬瀠獵敨⁳愠祮琠灹⁥瑥⁣戠⁹湵捳敲楷杮愠摮琠歡湥愠慷⁹牦浯猠瑩ⱥ挠浯汰瑥⁥湡⁤慭敫朠潯⁤桴⁥楤瑳牵敢⁤畳晲捡⁥獡攠楸瑳湩Ⱨ挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤æ吀歡湩⁧潤湷猠扵慭湩眠物湩⁧湡⁹祴数愠摮愠祮猠穩⁥湡⁤慭楫杮朠潯⁤楤瑳牵敢⁤畳晲捡⁥祢甠楳杮挠浥湥⁴潭瑲牡‬桷瑩⁥散敭瑮‬異瑴⁹瑥⹣愠摮洠瑡档眠瑩⁨硥獩楴杮猠牵慦散⁳景眠污獬‬汦潯獲攠捴Ⱞ挠浯汰瑥⁥污獡猠数楣楦摥愠摮愠⁳楤敲瑣摥꘮慔楫杮搠睯桳敥⁴敭慴湥汣獯牵⁥䉄ⱳ洠楡睳瑩档戠慯摲攠捴愠摮洠歡湩⁧潧摯搠獩牴扵摥猠牵慦散琠慭捴⁨楷桴攠楸瑳湩⁧畳晲捡ⱥ挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ԣ䴀☠䰠映牯瀠楯瑮眠物湩⁧楷桴ㄠ㔮猠浱丨浯湩污䄠敲⥡䘠䱒⁓噐⁃湩畳慬整⁤湵桳慥桴摥洠汵楴猠牴湡敤⁤潣灰牥挠湯畤瑣牯‬ㄱ〰嘠汯獴朠慲敤‬湩愠摮椠据畬楤杮挠湯散污摥倠䍖挠湯畤瑩†䤨䥓洠牡敫⥤†眠瑩⁨捡散獳牯敩⁳畳档愠⁳敢摮ⱳ挠潲獳‬汥潢ⱷ琠敥⁳瑥⹣漠⁦畳瑩扡敬猠穩⁥椠据畬楤杮挠湯散污摥†卍瀠敲獳摥猠整汥⠠潍畤慬⁲畳歮湥戠硯 整浲湩污戠硯渠瑯氠獥⁳桴湡ㄠ㘮洠桴捩潦⁲潭湵楴杮猠楷捴敨ⱳ猠捯敫獴‬慦敲畧慬潴獲攠捴愠摮䴠摯汵牡挠癯牥瀠慬整愠⁳潴⁰潣敶⁲䤨䥓洠牡敫⥤椠据畬楤杮挠湯楴畮畯⁳慥瑲⁨楷敲䘠䱒⁓噐⁃湩畳慬整⁤湵桳慥桴摥ㄠ㔮匠浱渨浯湩污愠敲⥡挠灯数⁲畭瑬獩牴湡敤⁤潣摮捵潴Ⱳㄠ〱‰潖瑬⁳牧摡ⱥ挠湯敮瑣湩⁧潴挠浯潭慥瑲⁨湡⁤慥瑲⁨潤汬⁹潣灭敬整愠汬愠⁳灳捥晩敩⁤潦⁲湯⁥楬桧⁴潰湩⽴硅慨獵⁴慦潰湩⁴潣瑮潲汬摥戠⁹湯⁥睳瑩档‬潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥‮上瑯⁥›⥩楗楲杮䌠汯畯⁲潣敤椠攮‮敒⽤教汬睯䈯畬⁥映牯倠慨敳‬求捡潦⁲敮瑵慲湡⁤片敥潦⁲慥瑲⁨桳污敢洠楡瑮楡敮⹤椊⥩删瑡⁥景挠瑵楴杮挠慨敳ⱳ挠浥湥⁴汰獡整Ⱳ眠楨整眠獡⁨湡⁤慭楫杮猠牵慦散朠潯⁤獡攠楸瑳湩⁧畳晲捡⁥湩汣摵摥椠畱瑯摥爠瑡⹥椊楩 潐湩⁴楷楲杮椠⁳潣獮摩牥摥映牯䴠摯汵牡匠楷捴敨⁳湡⁤潳正瑥⹳删瑡⁥景䴠瑥污楬⁣畓歮湥戠硯愠摮洠摯汵牡猠敨瑥挠癯牥瀠慬整愠摮漠桴牥挠湯敮瑣摥愠捣獥潳楲獥爠煥極敲⁤潦⁲潭畤慬⁲潰湩⁴楷楲杮椠据畬敤⁤湩焠潵整⁤慲整ਮ癩 慒整漠⁦潭畤慬⁲睳瑩档愠摮猠捯敫獴眠汩敢瀠楡⁤敳数慲整祬甠摮牥爠汥癥湡⁴瑩浥ਮŃȈ䄀汬愠⁳数⁲瑩浥丠‴扡癯⁥畢⁴潦⁲″楰‵流⁰潳正瑥漠瑵敬⁴湯猠浡⁥潢牡⁤楷桴ㄠ㔮猠浱畭瑬獩牴湡敤⁤潣灰牥挠湯畤瑣牯ㄠ〱‰潶瑬⁳牧摡⁥剆卌倠䍖椠獮汵瑡摥猠敨瑡敨⁤慣汢⁥楷桴䘠䱒⁓噐⁃⸲‵煓浭洠汵楴猠慴摮牡⁤湩畳慬整⁤湵桳慥桴摥挠灯数⁲楷敲映牯挠湯楴畮獯攠牡桴漠湩敤数摮湥⁴潢牡Ɽ挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ KӚȈ䴀☠䰠映牯瀠楯瑮眠物湩⁧楷桴ㄠ㔮猠浱丨浯湩污䄠敲⥡䘠䱒⁓噐⁃湩畳慬整⁤湵桳慥桴摥洠汵楴猠牴湡敤⁤潣灰牥挠湯畤瑣牯‬ㄱ〰嘠汯獴朠慲敤‬湩愠摮椠据畬楤杮倠䍖挠獡湩⁧慣楰杮†䤨䥓洠牡敫⥤†眠瑩⁨捡散獳牯敩⁳畳档愠⁳敢摮ⱳ挠潲獳‬汥潢ⱷ琠敥⁳瑥⹣漠⁦畳瑩扡敬猠穩⁥椠据畬楤杮倠䍖樠湵瑣潩潢⁸䴯⁓牰獥敳⁤瑳敥慣浤畩汰瑡摥琠牥業慮潢⁸潮⁴敬獳琠慨⸱‶浭琠楨正映牯洠畯瑮湩⁧睳瑩档獥‬潳正瑥ⱳ映湡爠来汵瑡牯⁳瑥⁣湡⁤″浭琠楨正氠浡湩瑡摥栠汹浡猠敨瑥琠灯挠癯牥⠠卉⁉慭歲摥 湩汣摵湩⁧潣瑮湩潵獵攠牡桴眠物⁥剆卌倠䍖椠獮汵瑡摥甠獮敨瑡敨⁤⸱‵煓浭⠠潮業慮牡慥 潣灰牥洠汵楴瑳慲摮摥挠湯畤瑣牯‬ㄱ〰嘠汯獴朠慲敤‬潣湮捥楴杮琠潣浭湯攠牡桴愠摮攠牡桴搠汯祬挠浯汰瑥⁥污獡猠数楣楦摥映牯漠敮氠ight point/ fan point controlled by one switch, complete all as specified and directed. Note : i) Wiring Colour code i.e. Red/Yellow/Blue for Phase, Black for neutral and Green for earth shall be maintained. ii) Rate of casing&caping included in quoted rate. iii) Point wiring is considered for Modular Switches and sockets. Rate of Metallic Sunken box and modular sheet cover plate and other connected accessories required for modular point wiring included in quoted rate. iv) Rate of modular switch and sockets will be paid seperately under relevant item.„ §`S&F Modular Switch one way 6 Amp, one module 230 Volts, complete all as specified and directed.aS&F Modular Switch one way 16 Amp, one module 230 Volts, complete all as specified and directed.aS&F Modular Switch two way 10 Amp, one module 230 Volts, complete all as specified and directed.]S&F Modular socket 6 Amp 3 Pin, two module 230 Volts, complete all as specified and directed.`S&F Modular socket 6/16 Amp 3 Pin, two module 230 Volts, complete all as specified and directed.jSupply and fix Switch piano 6 A SP 230 Volts single pole one way, complete all as specified and directed.[Supply and fix Socke outlet flush type 5 pin 6 Amp, complete all as specified and directed.lSupply and fix bell push piano flush type 5 Amp single pole one way, complete all as specified and directed.jS&F Switch piano flush type single pole one way 16 A SP 230 Volts, complete all as specified and directed.pS&F Switch Socket multipurpose 2 in 1, 3/5 pin 6 and 16 Amps flush type, complete all as specified and directed.ZS&F Ceiling rose surface type 3 terminals 65x50mm, complete all as specified and directed._S&F Bell electric, Ding Dong AC 230 Volts, single pole, complete all as specified and directed.jS&F Switch Socket combination 5 in 1, 6 Amps Flush type universal, complete all as specified and directed.zS&F Switch Socket combination piano type 5 in 1, 6 & 16 Amps Flush type universal, complete all as specified and directed.sS&F in box type switch Socket combination 2 in 1, 3 pin, 6 Amps flush type, complete all as specified and directed.S&F box type Switch Socket combination outlet 2 in 1, 3/5 pin 6 Amps & 16 Amp Flush type, complete all as specified and directed.™Supply and fix modular cover plate with frame, 3 module including all As per existing make, complete all as specified and as directed by Engr-in- Charge.™Supply and fix modular cover plate with frame, 4 module including all As per existing make, complete all as specified and as directed by Engr-in- Charge.™Supply and fix modular cover plate with frame, 6 module including all As per existing make, complete all as specified and as directed by Engr-in- Charge.™Supply and fix modular cover plate with frame, 8 module including all As per existing make, complete all as specified and as directed by Engr-in- Charge.3S&F Heat Resistant Flame Retardant HRFR PVC Insulated Industrial Cables,2.5 Sqmm Single Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, in all required colour coding, 1100 Volt Conforming to IS 694 in complete all as specified and directed. Note: (a) Insulation test of wiring to be carried out on completion of work. (b) Proper colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green) (c) Cutting chases for sub main wiring concealed PVC rigid conduit shall be deemed to be included in the quoted rate of item.M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 4 sqmm stranded conductor and and drawing through and including rigid PVC non metalic surface casing caping with accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 4 sqmm copper conductor and connected to common earth dolly, complete all as specified and directed, including taking down old submain wiring. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. ¦ ÛþM&L for providing the MCB DB of sheet metal enclosure double door type, single pole and neutral 12 way with 200 Amp rated bus bar 240V and grouted in walls with PCC 1:2:4 type B1 using 20mm graded stone aggregate, complete all as specified and directed.ýM&L for providing the MCB DB of sheet metal enclosure double door type, single pole and neutral 8 way with 200 Amp rated bus bar 240V and grouted in walls with PCC 1:2:4 type B1 using 20mm graded stone aggregate, complete all as specified and directed.
S & F MCB, TPN, 32 Amp to 63 A capacity, 415 V, 10 KA, C series including taking down old MCB TPN, complete all as specified and directed. Note: The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.

Supply and fix SPN 240V 32 Amps to 40 Amp, 10 KA, C series,including taking down old unsv MCB SPN, complete all as specified and directed. Note : The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs. ûSupply and fix MCB, SP 5 to 32 Amps, 10 KA, C Series including taking down old unsv MCB SP, complete all as specified and directed. Note : The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs. ÅSupply and fixing in repair MCB Protected socket (Modular AC box) 3 Module with MCB SP of capacity 25 Amp and power socket for geyser, complete all as specified and directed by Engr - in - Charge.n
Supply and fixing in replacement LED light fitting mirror type with high output diffuser 2 feet ,10 watt, 6000 K, 220 volts, AC decorative type with extruded polycarbonate having efficiency 120 lumens /watt warm white with driver holder including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.^M & L for earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts and washers of GI up to test point, GI tubing 40mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any t

潳汩‬敲潭慶景猠牵汰獵猠楯潴愠搠獩慴据⁥⹮硥⹣〵⥭愠摮挠湯敮瑣湩Ⱨ琠獥楴杮漠潣灭敬楴湯‬污獡猠潨湷漠汥捥牴捩瀠慬整丠⹯〠″景匠剓㈭〰‹慐瑲䤭‬潣灭敬整愠汬愠⁳楤敲瑣摥ਮ潎整㩳ਠ⸱†慅瑲⁨瑓楲⁰…牰瑯捥楴湯瀠灩獥氠湥瑧⁨灵潴☠椠据畬楤杮㜠㔮‰敭牴⁥獩椠据畬敤⁤湩琠敨焠潵整⁤慲整ਮ⸲†潓汩猠潨汵⁤敢映敲⁥牦浯猠潴敮‬潢汵敤獲‬条牧来瑡ⱥ朠慲敶獬攠捴脮♍⁌潦⁲噐⁃慣楳杮☠挠灡湩⁧景猠穩⁥㈨砰㈱ 浭䤠䥓洠牡敫⁤畳瑩扡敬映牯攠敬瑣楲慣楷楲杮‬潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥脮♍⁌潦⁲噐⁃慣楳杮☠挠灡湩⁧景猠穩⁥㈨砶㘱 浭䤠䥓洠牡敫⁤畳瑩扡敬映牯攠敬瑣楲慣楷楲杮‬潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥〮慔楫杮搠睯散汩湩⁧慦景ㄠ〲洰睳敥Ɒ愠祮洠歡⁥牦浯攠楸瑳湩⁧潰楳楴湯漠⁦湡⁹敨杩瑨戠⁹楤捳湯敮瑣湩⁧汥捥牴捩污挠湯敮瑣潩獮愠摮爠浥癯湩⁧景漠摬戠牵瑮眠湩楤杮眠物湩⁧湡⁹祴数‬汣慥楮杮猠慴潴⁲潣灭敬整映牯戠牵瑮眠物湩Ⱨ挠牡潢敲楳畤⁥湡⁤敲楷摮湩⁧景猠慴潴⁲楷摮湩⁧景散汩湩⁧慦景ㄠ〲洰睳敥⁰楷桴猠灵牥潩⁲畱污瑩⁹畳数⁲湥浡汥摥眠湩楤杮挠灯数⁲楷敲漠⁦硥獩楴杮猠数楣楦慣楴湯‬慧杵⁥湡⁤敷杩瑨眠瑩⁨畳数楲牯焠慵楬祴椠獮汵瑡潩潦⁲慳楴晳捡潴祲映湵瑣潩楮杮映湡椠牰獥湥散漠⁦䕊椠据慨杲⁥潣灭敬整愠汬愠⁳敲畱物摥愠⁴楳整愠摮搠物捥整⁤祢䔠杮⁲‭湩ⴠ䌠慨杲⹥Ŝ䴀䰦映牯瀠楡瑮湩⁧湯⁥潣瑡漠⁦祳瑮敨楴⁣湥浡汥瀠楡瑮⠠桷瑩⥥甠楳杮猠牰祡洠捡楨敮瀠楡瑮湩⁧湯琠敨猠牵慦散漠⁦散汩湩⁧慦景ㄠ〲洰睳敥⁰椨据畬楤杮戠慬敤 潣灭敬整愠瑦牥瀠敲慰慲楴湯漠⁦畳晲捡⁥⹩⁥挠敬湡湩Ⱨ眠獡楨杮漠⁦畳晲捡獥映汩楬杮挠癡瑩敩⁳楷桴映汩敬Ⱳ挠敬湡湩⁧畤瑳愠摮眠楲楴杮䴠