janpad rampur ki swar tehsil mai nirikshan bhawan swar ke punarodhar ka karya

Amount

Laying and Jointing PVC Pipe. Heading

Dismantling RCC WORK manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:1:2 or richer mix (i/c equivalent design mix.

Dismantling/Removing old plaster including raking out joints and disposal of debris within 60 meters distance.

Dismantling tile work in floors and wall in cement mortar including stacking material within 60 metres lead.For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/ by mechanical means including disposal of material within 60 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix

Dismantling/Removing doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 60 metres lead : Of area 3 sq. metres and below

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 60 metres lead as per direction of Engineer-in-charge. In cement mortar

Removing Paint or varnish and paints on Gates and Grill of i/c cost of all materials T&P etc complete.

Ist class brickwork in (1:4) in Cement Mortar including all cost of material, labour, T&P etc. complete.

P/F wood work in Frame /Chaukhat of Door and window including all cost of all materials, labour T&P etc. complete. (Second class teak wood)

12mm thick Cement Plaster in (1:4)CM per M²

20mm thick Cement Plaster in (1:4)CM per M²

Providing wall putty on old surface & new surface with approved Quality material of Berjer/Birla or similar make two coat.

Anti- Termite Treatment

C.C. (1:3:6) in base under flooring cement, coarse sand, aggregates including all cost of material, labour, T&P etc. complete.

C.C. (1:2:4) on roof in cement, coarse sand, aggregates including all cost of material, labour, T&P etc. complete.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:

Centering and shuttering for R.C.C. work including placing in position.

S/Fixing reinforcement for R.C.C. including bending, binding and placing in position with all cost of material, T&P and labour complete.

RCC (1:1.5:3) Work in kitchen counter & window projection

Supplying and fixing of flush doors (35 mm thick) commercial quality i/c cost of wooden cleats and stoppers and including fixing and adjustment of hinges and bolts,Locks arrangement, handels springs fittings necessary screws to be supplied.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid forseparately, all complete as per direction of Engineer-in-charge. (Note:-Butt hinges and necessary screws shall be paid separately Second class teak wood 30 mm thick shutter

glass panes, with wooden fillets wherever necessary float glass panes 4 mm thick

Providing and fixing 35mm thick wire gauze shutters using galvanised M.S wire gauze of everage width of aperture 1.4mm with wire of dia 0.63mm for doors,windows andclerestory windows i/c ISI marked bright finished and black enamelled M.S.b etc. complete.(second class teak wood )

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Supplying and laying black granite stone for Pantry i/c all cost of material,labour T&P etc. complete.

Providing and laying vitrfied floor tiles ( BELL/KAJARIA/SOMANI or other standered make)size of tile 60x60cm laid on 20mm thick cement mortar 1:4 i/c all cost of material labour T & Petc Complete.

Supplying and fixing ceramic tiles in toilet flooring and skirting

Supplying and laying c.c interlocking tile 80mm thick i/c all cost of material complete

Wire Fencing over Boundary wall

Using M.S. Angle 40 x 40x 6 mm for diagonal bracing

Brass 150 mm floor door stopper weighing not less than 0.357kg

Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete

Distempering 2 coat oil bound distemper of approved quality in required shade on undecorated wall surface to with an even shade over a primer coat with cement primer and also i/c preparing the surface even and smooth i/c cost of all materials complete.

Colour washig two coat using approved colouring materials i/c supply of all materials,labour and T&P etc required for proper completion of the work

Painting two coat with ready mixed paint on previously painted old surface of Gates and Grill of I.H. tanda With supreior synthetic enamel paint of standered make brushing to give an even shade and finished and i/c cleaning the surface all durt dust and other foreing metter sand paparing and stripping i/c cost matter and scoured with wire brushes fine steel/wood scrappers sand paparing and knotting i/c coat fo all and supply of all materials,labour ,T&P etc. complete.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 250 x 10 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 150 x 10 mm

Providing and fixing ISI marked oxised MS handles conforming to IS :4992 with necessary screws etc. complete. 125 mm

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less then grade AC 10 as per IS : 1868 transparent or dyed to required colour or shade with necessary screws etc. complete. 75 x 45x 3.2

Providing and fixing ISI marked aluminium sliding door bolts ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 transparent or dyed to required colour or shade with nuts and screws at complete. 300 x 16

Supplying and laying R.B.M for base of interlocking tile all complete

Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm

Providing and fixing white vetreous chine pedastal type water closet (EUROPEAN TYPE W.C. pan) wirh ISI Marked with white solid plastic seat and lead, 10 litre low level white pvc flushing cistern with manually controlled device( handle lever) conforming to IS 7231 with all fittings and fixtures.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Vitreous china lipped front urinal

Providing and fixing C.P. Brass stop cock(concealed) Standerd design and of approved make conferming to IS:8931

Providing and fixing C.P. Brass Angle valve for basin mixer points of approved quality approved quality conferming to IS:8931

Providing and fixing toilet paper holder : C.P.Brass

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm Nominal Bore

Providing and fixing C.P. Brass long nose body bib cock of approved quality conferming to IS Standerd and weighing not less than 810 gm .

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing P.V.C.Waste pipe for sink/wash besin including P.V.C. Waste fitting. Complete.Semi rigid pipe 32 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints completeas per direction of Engineer in Charge.Internal work - Exposed on wal 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the sameincluding testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls

15 mm nominal outer dia Pipes metre 409.65

20 mm nominal outer dia Pipes

Providing and placing on terrace (at all floor levels) polyethyline water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and overflow pipes but without fitting and base support for tank. 1000 ltr

Unplasticised P.V.C. connection pipe with brass union 45 cm long, 15mm nominal bore

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms

Providing/Fixing of S.S Jali 100 mm dia on top

supplying and fixing of 10 cm internal dia AC down pipe everest or charminar make complete with bends with door at top and plain at boottom and garting with including supply of necessary M.S clamp 2.5 cm into 3mm fixed to walls with and including supply of 10 cm long 6 mm dia nuts and bolts including washer of required size. all materials labour and T & P etc. required for proper completion of the work and also including repaire with plaster, pointing etc, if damaged during fixing of the pipe. AS Per item No. 730 above but with pvc pipe 6 kg/per sq.cm pressure 10 cm dia

110 mm PVC Bend

20 mm dia Gunmetal gate valve with wheel

Wiring point for light with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall,complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed.

Wiring point for fan/fresh air fan (light duty exhaust fan)with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface complete with 14 SWG copper earth continuity wire, piano type switch & ceiling ceiling rose on 3 mm. thick backelite sheet etc,complete in all respect

Wiring point for plug with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface complete with 14 SWG copper earth continuity wire, GP Box piano type switch & socket etc complete in all respect

S&F of 6Amp to 32 Amp.MCB (10 ka) C Curve

S&F of 40Amp. D.P. Insolator.

S&F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge.

Earth work in foundation in dry soil including lift up to 1.50 M & lead up to 30 M back filling, watering and ramming of excavated earth into the trenches and disposal of surplus earth as directed by the Engineer-in-Charge. (As per SOR chapt. No. 05, item no. 1)

Supplying filling sprading and leveling stone boulers of size range 5cm to 20cm in recharge pil in the required thickness for all leads & lifts all complete as per direction of E/I

Supplying filling sprading and gravels of size range 5mm to 10mm in recharge pil over the exising layer of boulder, required thickness for all leads and lifts all complete as per direction of E/I

Supplying filling sprading and leveling coarse sand of size range 1.5mm to 2mm in recharge pil in required thickness over gravel lyer for a lead & lift all complete as per direction of E/I

Boring/drilling bore well of required dia for casing/strainer pipe by suitable mathod prescribed in IS:25800 (part-1) including collecting samples from different strata, preparing and submitting strata chart/bore log including hire & running charges of all equipements, tools, plant and machinary required for the job all complete as per direction E/I upto 90mtr depth below ground level all types of soil 300mm dia (Item code DSR-2016-23.1.1.1)

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well using (CM) pipe of required dia, confirming to IS: 818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of E/I 100mm nominal size dia, (Item Code DSR-2016 23.3.1)

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well using (RMM) pipe of required dia, confirming to IS:12 818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of E/I 100mm nominal size dia, (Item Code DSR-2016 23.4.1)

Development of tube well in accordance with IS 1500 (part I) and IS: 11189 to establish maximum of usable water yield without sand content anyond permissible limit) with required capacity air compressor, running the compressor for required time well is fullyg developed measuring yield of well by notch method or any other approved method. Measuring statice level & draw down etc. by step draw method collecting water samples & getting in approved laboratory i/c disinfection of over well, all complete, including hire & labour charges air compressor, tools & accessories etc. all as per requirement and direction of Engineer-in-charge (Item Code DSR-2016-23.12)

Providing and fixing M.S. clamp of required dia to the casing/housing pipe of tubewell as per IS:1800 (Part I), including necessary bolts and nuts of required size complete 100mm claims (Item Code: DSR-2013-24.14.1)

Providing and fixing on wall face unplastisied rigid PVC plain water pipe 6Kg Cm2 praser confirmy to IS:3592 type A including jointing with sheel ring conferming as per IS: 5382 leaving 10mm gape for thurmal expention (I) Single socketed pipes including Tee, bant secket etc. all 110mm dia, T, bend. west jali etc

Providing and fixing ball plug/ bottom plug of required dia to the bottom of pipe accombly of tubewell as per IS :2800 (part I) 100 mm dia (Item Code DSR-2013-24.15.1)

M/S FALAK INFRASTRUCTURE