Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.4 LAccepted-AOC VILL KASHNI NEAR AANCHAL DAIRY PO BIN PITHORAGARH UTTARAKHAND PIN 262508 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262508 | L1 | Accepted-AOC Lowest quoted bidder. | |
| 2 | L2₹19.7 L+₹1.9 L (10.4%)Rejected-Finance CANTT ROAD KASHNI BIN PITHORAGARH UTTARAKHAND 262520 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262520 | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹19.9 L+₹2.1 L (11.5%)Rejected-Finance 161 MISSION INTER COLLEGE ROAD VILL PITHORAGARH DISTRICT PITHORAGARH STATE UTTARAKHAND PIN 262501 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262501 | L3 | Rejected-Finance Being other than L1 |
Tender Value
₹22.3 L
EMD Value
₹45,000
Closing Date
17 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Pithoragarh
GE Pithoragarh Post Bharkatia Pithoragarh ( UK)PIN-262520
ANNUAL REPAIR AND MAINTENANCE OF RESIDENTIAL AND NON RESIDENTIAL BUILDINGS AND ELECTRIC INSTALLATIONS OF ARCHER AT DHARCHULA UNDER GE PITHORAGARH
2022_MES_570229_1
8502/DHR/E8
Open Tender
Civil Works
Item Rate
330 days
GE Pithoragarh
Class E Category a(i)
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹45,000
Yes
20 Feb 2023
20 Dec 2022
24 Jan 2023
20 Dec 2022
17 Jan 2023
3 Jan 2023
Amount
DESCRIPTION OF ITEMS
Dismantling wall and ceiling boards (fibre,pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets.
M&L for 6mm thick Plywood, grade BWR, type BB, fixed in wall & ceiling cladding with screws to timber frame work complete all as sfd and directed.
Dismantling timber scantling 40sq.cm and over in section in any position in framed work all as specified.
M&L II nd class hard wood plain fillets square or rectangular in section cleansawn but bullnosed chamfared or rounded on one edge or face sectional area exc 6 sqcm and nexc 13 sqcm secured in nails complete all as specified and directed
Dismantling timber in fillets,rails posts ,rafters,purlins etc under 40 Sq.cm in section all as specified and directed.
M&L for II nd class hard wood plain fillets squaree or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed
S&F 12 mm thick perforated tiles for insulation purpose 60cm x 60cm in size ,fixed with staples or snap grid complete all as specified and directed.
S&F anodised aluminium snap grid of size 606mm x 605mm frame work for false ceiling complete all as specified and directed.
S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified and directed.
Dismantling plain or corrugated steel sheeting ,any gauge,thickness,including Nainital or similar pattern roof coverings and wall cladding complete all as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based corrougted steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverigs/cladding towall ,fixed with self tapping screws all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverigs/cladding towall ,fixed with self tapping screws all as specified and directed. (in ridge and gutter)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M/L for Joint free non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles with as in floor complete all as spfd & directed.
M/L for Joint free non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in skirting over and including 10mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed.
M/L for Vitrified ceramic tiles 10 mm thick (Square/Rectangular), light shade, polished area of each tiles tile exceeding 0.36 sqm and not exceeding 0. 42 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles with as in floor complete all as spfd & directed.
M/L for Vitrified ceramic tiles 10 mm thick (Square/Rectangular), light shade, polished area of each tiles tile exceeding 0.36 sqm and not exceeding 0. 42 sqm, in skirting over and including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed.
M &L Glazed ceramic tiles colured in vertical surface 450X 300(7-8mm) thickset and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces as backing for tiles.all as specified and directed by EIC
M&L for Chequered cement concrete tiles 20cm x 20 cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and no pigments in floor including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed
M&L 75mm thick cement concrete type C-2, PCC 1:3:6 (40mm graded agg) as in path/hardstanding as directed
Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
M&L for pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.
M&L for 35 mm thick pannelled door shutters of 2nd class hard wood any number of panels with panels of timber flat on both sides or medium density venered particle board 12 mm thick in panel inserts complete all as specified and directed.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete.
S&F powder coated aluminium frame for doors, widnows, ventilators, receving for 02 track sliding window, with one or more rebates including jointing cleat for fixing etc, screws, hinges, brackets dash fastners/rawl plugs etc, complete all as specified and directed
S&F powder coated aluminium window and ventilator shutters, 2 track sliding type without sash bars, aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, rollers, clip type locks etc complete all as specified and directed.
S & F famed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as spfd & directed.
S & F of 5.5 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square in each pane complete all as specified and directed.
S & F of 3mm thick plain sheet glass, ground or obscured or frosted, on one side ordinary quality and with oil putty or fixed with beads in square in each pane complete all as specified and directed.
S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long complete.
S&F 100 mm mild steel but hinges medium weight,cold rolled complete all as specified and directed
S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed.
S&F 150 mm aluminium anodised barrel tower bolts extruded section complete all as specified and directed
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type) and fixing bolts of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed
S&F in repairs (curtain rod)/ Harrison rails, anodised aluminium alloy incl fixing brackets, stops, rollers etc complete all as specified and directed
Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed.
Supply only liquid waterproofing compound ISI marked complete all as specified and directed.
M&L rendering 12mm thick cement plaster on internal surface of wall in CM (I:6) finished even and fair complete all as specified.
M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil emulsion distemper over a coat of birla putty complete all as specified and directed.
M&L rendering 15 mm thick in two layers on fair faces of brick work or concrete surfaces, first layer 10 mm thick in CM 1:6 and second layer 5 mm thick in CM 1:4, top layer mixed with WPC as per manufacturer's instructions, finished even and fair complete all as specified and as directed.
M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.
S&F 15 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking down old pipe, complete all as spfd & directed
S&F in repair plastic water closet seat cover, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed.
S&F in repairs vitreous china squatting pan "Orissa pattern" size 580 mm x 440 mm white with integral foot rests, incl provn of lime concrete bedding complete all as spfd & directed.
S&F in repairs vitrous china wash down water closet pan (padestal pattern) white colour(excluding cistern), complete all as specified and directed
S&F in repairs PVC flushing cistern low level white with inlet pipe,ball valve,float valve and handle including brackets complete all as specified and directed
S & F in repair vitreous china wash hand basin, (white), flat back, size 500 x 400mm, including brackets cutting for and pinning in ends of brackets or erecting stand, with and including 32mm bore waste fittings, brass chromium plated with long screwed shanks and fly nuts flange end bedded in red lead incl waste pipe up to NT.
S&F in repair 15 mm bore bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as spfd & directed.
S&F in repair Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spfd & directed.
S&F in repairs Health Faucet (ABS Body) MS, Chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
Supply and fix in repair brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and directed.
S&F in repair 15 mm Stop valves/ angle valve , fancy type, CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd & directed.
S&Fin repair 15 mm concealed type valves, fancy type, CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd & directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long all as spfd and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
S&F for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed .
S&F for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed .
S&F 75 mm PVC (SWR) bends any radius complete all as specified and as directed .
S&F 110 mm PVC (SWR) bends any radius complete all as specified and as directed .
S&F PVC (SWR) junction, with access door, single (single T) equal or unequal, for 110 mm bore of pipe
S&F PVC (SWR) junction, with access door, single (single T) equal or unequal, for 75 mm bore of pipe
S&F in repair Aluminium anodised tubular towel rail 20mm dia, D type, 60cm long between flange complete all as spfd and directed
S&f in repair round Grating 100mm dia with wash hole of PTMT
M&L for two coat of synthtic enamel paint over a coat of pink primer to new wooden surface of any description exc 10 cm girth or width including prepration of wooden surfaces complete all as specified and directed
M&L for one coat of synthtic enamel paint over to old wooden surface of any description exc 10 cm girth or width including prepration of wooden surfaces complete all as specified and directed
M&L for one coat of synthtic enamel paint to old steel surfaces of any description exc 10 cm girth or width including prepration old steel surfaces complete all as specified and directed
M&L for two coat of synthtic enamel paint over a coat of red oxide, zinc chrome primer to new steel surfaces of any description exc 10 cm girth or width including prepration new steel surfaces complete all as specified and directed
M &L for preparation of old decorated surfaces and applying one coat of white wash on walls complete all as specified and directed.
M &L for preparation of old decorated surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.
M &L for preparation of (previously treated) surfaces of walls and applying one coat of oil emulsion distemper any tint of walls complete all as specified and directed.
M &L for preparation of old decorated surfaces of walls and applying one coat of cement base paint on walls complete all as specified and directed.
M&L for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
S&F 1mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded
Demolition of brick work built in cement or cement lime mortar complete.
M&L Pre-cast cement concrete block masonry with solid blocks of plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate), exc. 10 cm in width and setting in mortar,1:6 complete all as directed
Excavating in trenches not exceeding 1.5m wide and n. exc 1.5m in depth; for foundation, etc not exceeding 10sq.m on plan and not exceeding 1.5m in depth and getting out in soft/ loose soil all as specified.
Demolition of cement concrete (unreinforced) as in ground floors & pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
Returning, filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm In soft/ loose soil.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, in soils.
Demolition and breaking up drain pipes 300 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement 'mortar complete.
M&L for reinforced concrete pipes, 300mm dia class NP2, laid and jointed complete with collar complete all as specified and directed.
M&L for PCC 1:3:6 type C-2(40mm grade stone aggregate)as in bed to 300mm dia NP-2 drain pipes including packing under and haunching against the sides of pipes after they are laid and tested.
M&L for PCC 1:3:6 type C-2(40mm grade stone aggregate) as in foundation, etc complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping complete all as specified and directed.
Extra for forming fair finished surfaces of drain or channels, inner girth 30 cms, using extra cement including forms, moulds mitred/ stopped ends etc., complete.
M&L Cement concrete 1:3:6 Type C2 (using 40mm graded stone agg) as in surface channels and drains
M&L for Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole, cover slabs, size required at site include necessary formwork and carriying upto manhole and properly set in CM (1:4) after demolition of existing MH cover complete
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete and making good disturbed surfaces of walls, floors etc complete all as specified and directed.
M&L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in PVC conduit of suitable size, complete with all accessories / fitting and Ist class hard wood (Shisham) terminal switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified and directed for: (a) One light point/Fan point/bell point controlled by one way switch of 5/6 Amps
(b) One 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps
(c) One 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps
M&L point wiring with 2.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in PVC conduit of suitable size in open surface type complete with all accessories / fitting and Ist class hard wood (Shisham) terminal switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 2.5 Sqmm multistranded copper conductor cable as earth wire and connecting to earth dolly complete all as specified and directed for 3/5 pin, 15/16 Amps power socket controlled by one, one way switch of 15/16 Amps complete all as specified
S&F in repair switch piano flush button single pole one way 5Amps complete all as specified and directed
S&F in repair switch piano flush button single pole one way 15Amps complete all as specified and directed
S&F in repair socket out let 3 pin 5/6 Amps flush type complete all as specified and directed.
S&F in repair socket out let two in one 3 pin 5/6 Amps and 3 pin 15/16 Amps , flush type, non shutters, non interlocking complete all as specified and directed
S&F in repair Ceiling rose, surface bakelite, AC, 60x30mm, 3 terminals complete all as specified and directed
S&F in repair lamp holder PVC /poly carbonated type with back plate suitable for pendants /angular /batten fittings complete all as specified and directed
S&F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed
Supply & fix in replacement LED tube light 4' long along with all fixtures and fittings ,internally pre wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size ,18W complete all as specified and directed
S&F in replacement LED retrofit 'T' bulb 12 watts, complete all as reqd site and directed.
Taking down carefully storage water heater of capacity 25/35/50 ltr, dismantling inner tank and outer tank, pipe assembly, cleaning thoroughly with descaling liquid compound complete to ensure free and constant flow of water through outlet, welding of inner tank if required at site, rethreading of inlet/outlet pipe 15 mm dia, reassembling the same at existing /new location including necessary fasteners to ensure proper safety as reqd at site, testing and commissioning after re-installation at site complete all as specified and directed. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.
Supply only thermostate fitting fitment varying capacity for 25/35/50ltrs capacity geysers.
Supply only PVC connection pipe nylon threaded 15mm size with brass nuts copping in both end of length 600mm for geysers complete all as specified and directed.
Supply only heating element of 1.5/2.0 KW for geyser (as per sample ISI brand) including taking down old heating element complete all as specified and directed.
Taking down ceiling fan from existing position, dismantling, overhauling and cleaning throughly, oiling /greasing and re- assemble after replacing split pins, check nuts, rubber seal etc and rehanging at same or new locations duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified all as directed. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.
M&L for taking out burnt copper winding from ceiling fan of 1200 mm size and rewinding with existing /same guage of super enammeled copper winding wire complete all as specified and directed.
Supply only Ball bearing for Ceiling fan after and including taking down old ball bearing complete all as reqd at site, specified and directed.
Supply only capacitor 2.5 mfd±5%, 440 Volt, AC, 50Hz after removing old defective condensor complete all as specified and directed.
Taking down flate-plate solar collector storage solar water heater of capacity upto 250ltr, dismantling inner tank and outer tank, pipe assembly, cleaning thoroughly with descaling liquid compound complete to ensure free and constant flow of water through outlet, welding of inner tank if required at site, laser/ultrasonic welding for bonding fin and raiser tube, repair of copper bracing for bonding of header and raiser making leak proof, repair & repalcement of back and side insulation material, rethreading of inlet/outlet pipe 20 mm dia, reassembling the same after replacing u/s items i.e. heating element, thermostete, toughned glass, connection pipe with clamp etc. at existing location including necessary fasteners to ensure proper safety as reqd at site, repair/welding of MS structure for collector stand, testing and commissioning after re-installation at site complete all as specified and directed. Note: Spare parts (heating element, thermostete, toughned glass, connection pipe with clamp) will be measured and paid separately under respective items as supply only as mentioned below.
Supply only heating element of 3.0 KW for solar water heater (as per sample ISI brand) including taking down old heating element complete all as specified and directed.
Supply only thermostat for solar water heater including taking down old.
Supply only Heavy duty nylon threaded flexible PVC/CPVC connection pipe 25 mm dia suitable for both hot & cold watrer supply of solar water heater complete all as specified and directed.
Supply only GI/brass adjustable scew clamp as per sample
Taking up or down steel tubing and connections, including cleaning for re-fixing and re-fixing the same at new or old locations by replacing worn out GI fittings complete all as specified and directed. Note: GI fittings as required shall be measured and paid separately under respective items as supply only as mentioned below.
Supply only Elbow 15mm
Supply only Tee 15mm
Supply only Socket 15 mm
Supply only Union 15mm
M&L in repair sub main wiring with 2 run of 4 sqmm and one run of 4 sqmm Copper cable FRLS multistranded drawn in and including PVC conduit in surface/recessed providing necessary clamps, screws, thimbles and connected to MCB of solar water heater/DB box etc all as reqd at site, specified and directed.
m/s vishnu kumar agarwal
SHAHJEE FRIDGE SERVICE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .