SPECIAL REPAIR TO OVERHEAD TANKS, BATHROOMS, TOILETS AND COOK HOUSES OF CERTAIN OTM ACCOMMODATION OF 165 AND 202 MTN BDEs AND ITS SUBORDINATES UNITS UNDER GE (NORTH) BINNAGURI

Amount

Taking down chowkat with shutter n.exc. 1.5 Sqm each (without taking off shutter from the frame) including builders hardware complete all as specified and as directed.

M&L for Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed including fixing of hold fast as per specification and drawing complete all as specified and as directed.

S&F factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as specified and as directed.

S&F 100 mm size stainless steel butt hinges, medium weight cold rolled complete all as specified and as directed.

S&F 150 mm size long Aluminium anodised barrel tower bolts complete all as specified and as directed.

S&F aluminium handles 150mm size cast type anodised complete all as specified and as directed.

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frame) including builders hardware complete all as specified and as directed.

S&F for pressed steel frame for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm, 1.25mm thick including 100mm size MS hinges with one shop coat of zinc chrome primer complete all as specified and as directed.

M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and as directed.

S&F 30 mm thick flush shutter, solid core construction with block board core & plywood face panels commercial type on both sides complete all as specified and as directed.

S&F 125 mm size mild steel butt hinges, medium weight cold rolled complete all as specified and as directed.

S&F sliding door bolt of 300mm long plate aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

M&L for Mild steel framed work as in doors frame of angle or other section conforming to Fe 410-W(Gde-E- 250)quality-A with gusset plates, rails, braces, etc., and including fixing of hinges or other door fittings complete all as specified and directed. (door fittings like hinges, tower bolt etc shall be measured and paid separately) complete all as specified and as directed.

S&F factory made pressed steel windows and ventilators of standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e. glazed & wire gauged shutter including all fittings like MS hold fast, box hinges, Handles, MS Tower Bolts, Stoppers, hinges, MS stay with long screw, MS spring latch, MS Guard Bar/ grill etc complete with glazing bars including one shop coat of zinc chrome primer complete all as specified and as directed. Note:- (i) Rate quoted shall be deemed to be including of all fittings fixtures. (ii) Glass, wire mesh and painting only shall be measured and paid separately under relevant items of Sch. (iii) The Drawings referred above are available in the office of Engr-in-Charge and can be refereed in the office working hours if required.

S&F in repair steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars all as specified and as directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in square n.exc. 0.5 sqm in each pane jointed with oil putty complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18Sqm but n. exc. 0.36 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:4) as in vertical surfaces of skirting/ dados/ repairs to steps complete all as specified and as directed.

M&L for glazed ceramic colour tiles 450 x 350 x 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile approved complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid dry or bedded and pointed in any mortar complete all as specified and as directed.

M&L for 18 to 20mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms, corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick Screed bed (1:4) including rounded the exposed surfaces of granite complete all as specified and as directed.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar and removing from site complete all as specified and as directed.

M&L brickwork with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and as directed.

M&L for 15mm thick plaster in two coats first coat 10mm thick in cement mortar 1 : 6 and second coat 5mm thick in cement mortar (1:4) rendering on fair faces of brick work or concrete surface mixed with water proofing compound in top layer @2% by the weight of cement or as per manufacturer's instructions finishing the surface even and fair without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item of this schedule.

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished even & smooth (without using extra cement) complete all as specified and as directed.

M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and fair without using extra cement complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and as directed

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer after applying 2mm thick cement based wall putty to wall surface complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying 2 mm thick cement based wall care putty including complete removal of existing treatment complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surface of ceilings and applying three coats of white washing complete all as specified and as directed.

M&L for preparation of old surfaces of ceilings and applying two coats of white washing complete all as specified and as directed.

M&L for preparation of newly wall plastered surfaces and applying three coats of color wash on wall complete all as specified and as directed.

M&L for applying two coats of colour wash over one coat of white wash on plastered surfaces of wall including preparation of newly plastered surfaces complete all as specified and as directed.

Taking up or down 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed.

Taking up or down or 20mm steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed.

S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Refixing old 15mm GI tubing and connections on new or old position (walls, ceiling, floor etc) complete all as specified and as directed. Note : The serviceable GI pipe obtained from taking down shall be reused.

Refixing old 20mm GI tubing and connections on new or old position (walls, ceiling, floor etc) complete all as specified and as directed. Note : The serviceable GI pipe obtained from taking down shall be reused.

Dismantling water tank exc 500 n.exc 1000 ltr capacity and removing to store complete all as specified and as directed.

S&F 1000 ltrs rotational moulded polyethylene water storage tanks, multilayer (cylindrical vertical with closed top) including connecting up pipes securing access covers etc hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed.

S&F 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed.

S&F wash basins, vitreous china, white flat back of size 550mm x 400 mm x 140 mm or nearest size conforming to model ‘CALBURT’ Cat No.S2020103 of CERA or techno commercially equivalent model in other makes as listed in List of Makes with and including cast Iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and table top basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and directed.

S&F in repair 10 ltr capacity low level symphonic type white plastic twin flushing cistern conforming to model ‘COMPASS’ Cat No B1020106 of CERA or techno commercially equivalent model in other makes as listed in List of Makes as per IS 7231:1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed.

S&F vitreous china squatting pan "Orissa" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap front or back inlet etc including connection to trap and flushing pipe and provision of cement concrete bedding complete all as specified and as directed in repairs including demolition of existing one complete all as specified and as directed.

Supply & fixing in repairs vitreous china wash down water closet pedestal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminium/PVC hinging devices etc complete all as specified and as directed.

S&F in repair Vitreous China Urinal, Half stall type, white (including all fittings and fixture i.e. CP waste coupling, CP urinal spreader, PVC waste pipe etc) complete all as specified and directed

S&F in repair 15 mm bore fancy type bib taps cast copper alloy 15 mm bore with fancy chromium plated screwed down , screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make:- CERA Cat part No. F 1015151 or techno commercially equivalent model in other makes as listed in list of makes.

S&F in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. Make:- CERA Cat part No. F 1015361 or techno commercially equivalent model in other makes as listed in list of makes.

S&F in repairs of Chromium plated over head shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified. Make - CERA, Cat No. F7010213AB or techno commercially equivalent model in other makes as listed in list of makes.

S&F in repair 15 mm bore fancy type angular valve cast copper alloy screwed down , high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. Make:- CERA, Cat part No. F 1015201 or techno commercially equivalent model in other makes as listed in list of makes.

S&F in repair CP health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including taking down old one complete all as specified and as directed.

S&F in repair 15mm bore pillar taps swan neck cast copper alloy, with capstan heads, chromium plated, screwed down, fancy high pressure, with or without lettered ‘HOT or COLD’ with long screwed sunk and fly nuts completed all as specified and as directed. Make : CERA, Cat Part No F 2008105 or techno commercially equivalent model in other makes as listed in list of makes.

S&F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified and as directed

S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and as directed

S&F in repairs for brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed

S&F in repair PVC (SWR) multi floor trap 75mm /100mm, plain with grating including jointing with solvent complete all as specified and as directed

Taking down PVC soil pipe with fittings from wall/ trenches of any description including fittings complete all as specified and as directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches or in floors complete all as specified and as directed.

S&F 110mm dia PVC bends of any radius with access door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with access door complete all as specified and as directed.

S&F 110mm dia PVC SWR vent cowl complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches or in floors complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed.

Supply & fixing in repairs powder coated anodised aluminium frame (sections weighing not less than 1.40 kg/mtr) made of Square/tubular Aluminium section for door with one or more rebates jointing cleat for fixing etc and provision of aluminium door shutter sections weighing not less than 0.55 kg/m (Single/Double shutter) including necessary jointing cleats glazing clips, rubber gasket aluminium anodised snap beading, screws, hold fast, Aluminium hinges 3Nos 100mm long for each shutter, floor stopper, locking arrangements, handle, 5.5mm thick tinted glass fixed in panels with aluminium guard bar complete all as specified and as directed.

Taking down existing tarfelt including tiles, lime/cement concrete & screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.

M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying acrylic polymer modified waterproof coating finished even and smooth without using extra cement complete all as specified and as directed.

M&L for providing and applying single component acrylic polymer modified, fiber reinforced waterproof coating Roof Guard or techno commercially equivalent make as listed in list of makes and as approved by GE in 4 coats of application (a) applying primer coat with Primer @ 0.3 kg /sqm (b) over priming coat applying roof guard or equivalent as specified below or manufacturer instructions with fiber reinforcement a width of approx 1m @ 0.75kg/sqm on the flat or vertical surfaces over parapet wall and ensure that there are no bubbles of creases. Overlapping of the fiber is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition. (c) Applying second coat of roof guard or equivalent @0.75Kg/sqm ( d) Applying final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly. Note : Water Proofing treatment shall be carried out by authorised applicator approved by the manufacturer.

Demolition of cement concrete of any description in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for water proofing treatment to sunken floor with the following course of treatment / specification :- (i) Cleaning top surface of floors / slabs and laying 50mm thick (avg) PCC of grade M10 (Nominal mix), mixed with WPC as per manufacturer's instruction laid in slope 1:20 towards spouts including coveting corners. (ii) 15mm thick plastering in CM (1:4) on sides mixed with WPC as per manufacturers instruction. (iii) Applying 1st layer of slurry @ 0.488 kg/ sqm mixed with acrylic based polymer modified cementious compound @ 0.253 kg / sqm , this layer shall be allowed to air cured for 4 hrs . ( iv) Applying 2nd layer of slurry @ 0.242 kg/ sqm mixed with acrylic based polymer modified cementious compound @ 0.126 kg / sqm , this layer shall be allowed to air cured for 4 hrs followed with water curing for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces. (vi) Providing 150 micron thick polyutethene paint in two coats ( each of 75 micron measured dry surface over a coat of PU primer including preparation.(Make of PU primer- Dek guard EP - 302 of m/s Fosroc or techno commercially equivalent make as listed in list of makes and approved by GE. Make of PU paint- Dek guard PU or techno commercially equivalent make as listed in list of makes and approved by GE (vii) Sunken floor shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage / seepage exists. (ix) Sunken portion shall be filled with lean concrete of grade M 7.5 stone aggregate. (Note : (i)Treatment shall be carried out by authorised applicator approved by the manufacturer., (ii) Only floor area should be measured for payment)

Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and directed

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 15 mm thick cement screed bed cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

All as per item No. 84 above but in riser of steps, skirting, dado and pillar etc but with 10mm thick backing coat in CM 1 :4 complete all as specified and as directed.

M&L for Rubbing and polishing only for existing kota stone slab flooring complete all as specified and as directed.

M&L for 25mm thick pre-polished and chemically treated smooth finish exterior grade coloured chequered tile including 15 mm thick Screed bed as in path complete all as specified and as directed

M&L for preparation of newly wall plastered surfaces and applying three coats of white wash on wall as specified as directed.

M&L for one coat of white wash on old surfaces of wall including preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

M&L for one coat of white wash on old surfaces of ceiling surfaces including preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

M&L for two coats of white wash on old internal surfaces of wall including preparation of old surface complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified.

S&F in repair 15 mm bore fancy type bib taps long body (two in one) cast copper alloy 15 mm bore with fancy chromium plated screwed down , screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make:- CERA Cat part No. F 1015163 or techno commercially equivalent model in other makes as listed in list of makes.

S&F 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2.00Sqm each and removing from site complete all as specified and as directed.

M&L for one coat of colour wash on wall of old surface with preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in fins, fascias, louvers, parapets, and railings, newels, RCC Shelf, balustrade & the like complete all as specified and as directed. Note : Reinforcement and necessary form work shall be measured and paid separately.

Formwork to fins, louvers, fascia, RCC Shelf for fair finished surfaces of concrete flat complete all as specified and as directed.

M&L Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

S&F 500 ltrs rotational moulded polyethylene water storage tanks, multilayer (cylindrical vertical with closed top) including connecting up pipes securing access covers etc hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F in repair 15 mm bore fancy type bib taps long body (two in one) cast copper alloy 15 mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make:- CERA Cat part No. F 1015163 or techno commercially equivalent model in other makes as listed in list of makes.

M&L for providing, cement concrete type B1 1:2:4 using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges, padding to roof etc complete all as specified and as directed.

INTERNAL ELECTRIFICATION Taking down carefully old/unsv copper/aluminum any type of point wiring for one light, socket, fan, bell or power etc including all fittings such as switches sockets, holders, light fittings, fan regulators, call bell etc and making good the disturbed surface of wall ceiling complete all as specified and directed.

M&L for point wiring complete for one power point for one metal plug & socket for AC or one socket for geyser point on independent board with 4.0 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.0 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for Metal Plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles.

M&L for point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed FRLS cable ,single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC medium grade casing capping (Double lock pattern) and accessories (ISI Marked) on walls/other surface etc including provision of 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable FRLS as earth continuity conductor (green in colour) & PVC switch box heavy duty of appropriate size on wall/other surface (ISI Marked) for housing switches/socket outlet, Fan regulators etc complete all as specified and directed for the following :- (a) One light/fan/exhaust point controlled by one way switch 5/6 amps.

All as per item No. 106 above but for One socket out let 5/6 amps point on the independent board complete all as specified and as directed.

All as per item No. 106 above but for One socket out let 5/6 amps point on the same board complete all as specified and as directed.

All as per item No 106 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and as directed.

S&F of switch piano flush type 5/6 amps single pole one way complete all as specified and directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and directed

S&F of switch piano flush type 15/16 amps single pole one way complete all as specified and as directed.

S&F of ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S&F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S&F LED white glass Lamp 1x09 Watt 230V Base-22 complete all as specified and directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed complete with all accessories internally prewired and connecting up complete all as specified and as directed.

Fixing only LED Tube light of any watt on wall/surface mounted fixed with 02 Nos of PVC round/ square blocks, screws etc complete all as specified and as directed.

S&F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unsv fitting all as directed.

Taking down carefully Ceiling fan from its original position and refixing / hanging after B/R plaster work complete all as specified and as directed.

M&L painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc, complete all as specified and as directed.

Taking down carefully Exhaust fan from its original position and refixing it after making in serviceable condition to the same position after B/R plaster work complete all as specified and as directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), Single door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete all as specified and as directed.

S&F MCB, single pole & neutral, 35 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete all as specified and as directed.

S&F MCB, single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and as directed.

M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in suitable dia of PVC rigid non- metallic conduit with and including taking down unsv sub main wiring complete all as specified and as directed. Note : Two runs of sub main wiring cable along with one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.

M&L for sub main wiring with 2 runs of 4.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor including one run of 4 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in suitable dia of PVC rigid non- metallic conduit with and including taking down unsv sub main wiring, complete all as specified and as directed. Note: Two runs of submain wiring cable along with one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.

S&F epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 240 Volts, C Series current carrying capacity 10 KA, including necessary connection complete all as specified and as directed.

Taking Down electric water Heater and refixing it after the B/R work to the same position any type /size complete all as specified and directed.

NARAYAN MAJUMDER

L. B. SHARMA

N K Construction