Annual Repar and Maintenance

Amount

Engaging skilled Plumber with necessary tools and miscellaneous minor fittings such as Telxon tape, washers, jumper valves etc. for attending the day to day complaints , minor repair works, fixing / replacing the damaged fittings such as taps/ wash basins, EWC/IWC, flushing cisterns, Replacing damaged PVC/GI pipe lines, PVC rain water pipes and fittings, pumping water to the Hospital buildings and staff quarters including minor repairing and maintenance of Pumps and periodic chlorination of open wells etc. all works connected with internal/ external water supply lines, water supply fittings/ fixtures, sanitary installations, OHT etc. at ESI Hospital, Dispensary & Staff Quarters at Feroke, ESI Dispensaries & Staff Quarters at Cheruvannur (I & II), Chakkorathukulam, Eranjipalam, Kunnathupalam & Mavoor, DCBO at Kallai, ESIC Branch Offices at Feroke, Kozhikode, Kallai & Mavoor- all in Kozhikode Dist. as directed by the Engineer in charge.

One Plumber in one shift of 8 hours during any time from 6.00 AM to 10.00 PM on all days including Sundays and holidays.

Plumber 2nd for one shift of 8 hours during any time between 6 AM to 10 PM on all days including Sundays.

Engaging sewer man for attending complaints on sewer/drainage lines, removing blockage in Drainage/ sewer lines, Gully traps, Manholes and Septic tanks etc. in the campus of ESI Hospital, Dispensary & Staff Quarters at Feroke, ESI Dispensaries & Staff Quarters at Cheruvannur (I & II), Chakkorathukulam, Eranjipalam, Kunnathupalam & Mavoor, DCBO at Kallai, ESIC Branch Offices at Feroke, Kozhikode, Kallai & Mavoor- all in Kozhikode Dist. complete as directed by the Engineer in charge.

One sewer man in one shift from 9 AM to 5 PM on all days excluding Sundays or any one off day per week in lieu of working on Sundays in exigence of work.

Engaging Beldar (Male Mazdoor) for assisting plumber in attending the day to day complaints of all sorts of Internal water supply/External water supply/sanitary installations /assisting carpenter in repair works/ cleaning open area in campus/ assisting sewer man in clearing blockages/ clearing silting storm water drains including removing and replacing RCC covers, removing growth of baniyan tree on walls and Terraces, cutting branches of trees up to 20 cm in diameter etc. in ESI Hospital, Dispensary & Staff Quarters at Feroke, ESI Dispensaries & Staff Quarters at Cheruvannur (I & II), Chakkorathukulam, Eranjipalam, Kunnathupalam & Mavoor, DCBO at Kallai, ESIC Branch Offices at Feroke, Kozhikode, Kallai & Mavoor- all in Kozhikode Dist.(Mazdoor is not to be specifically attached with any skilled worker and suppose to attend all woks assigned to him and as directed by the Engineer in charge.

One Beldar (male mazdoor) in one shift of eight hours between any time from 9 AM to 5 PM on all days including Sundays.

Beldar 1 (male mazdoor) in one shift of eight hours between any time from 9 AM to 5 PM on all days excluding Sundays or any one-off day per week in lieu of working on Sunday in exigence of work.

Engaging Skilled Carpenter/ Aluminium Fabricator with necessary tools and miscellaneous fittings such as screws and sleeves etc. in attending complaints regarding all steel/wooden/Aluminium doors, windows /partitions in the ESI Hospital, Dispensary & Staff Quarters at Feroke, ESI Dispensaries & Staff Quarters at Cheruvannur (I & II), Chakkorathukulam, Eranjipalam, Kunnathupalam & Mavoor, DCBO at Kallai, ESIC Branch Offices at Feroke, Kozhikode, Kallai & Mavoor- all in Kozhikode Dist. as directed by the Engineer in charge.

In one shift from 9 AM to 5 PM on daily basis as and when required by the Engineer in charge.

Supervision of all works related to the contract i.e. staff deployment, maintenance, repair works, etc. ensuring that the persons engaged are bonafidely discharging their duties, ensuring that the complaints are attended within the shortest time possible by workers to the satisfaction of Users, Liaison with ESIC Engineers and users, maintaining record of all works done under the Contract in ESI Hospital, Dispensary & Staff Quarters at Feroke, ESI Dispensaries & Staff Quarters at Cheruvannur (I & II), Chakkorathukulam, Eranjipalam, Kunnathupalam & Mavoor, DCBO at Kallai, ESIC Branch Offices at Feroke, Kozhikode, Kallai & Mavoor- all in Kozhikode Dist. obtaining user certificates from user authorities in writing either in the task register to be maintained or through letters , arranging Testing of water samples through Govt. Lab as and when required and as directed by Engineer in charge.

One supervisor in one shift from 9 AM to 5 PM on alternative days excluding Sundays or any one-off day per week in lieu of working on Sundays in exigence of work.

Cleaning of septic tank of size up to 5 x2x 2 m including removing and refixing the cover slab , fully de sludging and emptying the tank either manually or by truck mounted sucking units including disposing the sludge either to the Municipal dumping yard o locally by making earth pits and refilling with earth etc complete as directed by the Engineer in charge. (A photograph of cleaned septic tank bottom shall be provided along with the bill for payment).

Providing electric welding with portable welding machines including welding rod cost for minor welding repair etc complete as directed by the Engineer in charge.

Clearing jungle Mechanically with JCB or similar machinery including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level including dressing the surface/filling the undulation etc and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (Cutting shall be done on prior approval and necessary certificate after finishing the cutting work each time shall be obtained from the concerned ESI Office.)

Cutting branches of trees of the girth (measured 1 m from stem), including cutting of trunks and branches, and stacking of serviceable material and disposal of unserviceable material.

Beyond 60 cm girth upto and including 120 cm girth

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

15 mm cement plaster on terrace finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including making false markings of 30 cm x 30 cm with nylon thread of 6 mm dia.

Providing and applying cementitious acrylic slurry for waterproofing treatment to the RCC structures like RCC roof slabs, retaining walls of the basement, water tanks,podiums,reservoir, sewage and water treatment structure etc., prepared by mixing 4 liters acrylic co polymer emulsion ( Liquid component of Brush bond or equivalent)in the ratio of 4:4 ( 4 liters of acrylic co polymer emulsion: 4 liters of water), mixed further with 23 kg of powder component of Brush bond or equivalent stirred well and applied to surface to be treated with synthetic/ fibre brushes @ 1.10 kg per sqm for horizontal and 1.40 kg per sqm for vertical surfaces in two or more coats as per site condtions each coat to be applied after hand touch dry of prevous coat all including cleanig the surface with water jet/ wire brushes to remove loose particles and fungus growth, patch up of broken surfaces with cement plaster 1:3 ( 1 cement : 3 fine sand ) and filling the cracks/ grooves etc with silicon sealant or crack filler of FOSROC or equivalent etc one day before treating with cementiotios arylic slurry etc. including wetting the surface on the dy of application etc.complete as directed by the Engineer in charge .( The treatment to carry a performance guarantee against any leakage for 10 years.)

For horizontal surface one coat @1.10 kg per sqm.

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge.

25mm average thickness

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

Bars upto 12 mm diameter metre.

Bars above 12 mm diameter metre.

Providing, mixing and applying bonding coat of approved adhesive on spalling of plaster/chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.

SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer.

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).

Plaster thickness varying between 12 to 25 mm.

12 mm average thickness

Supplying following miscellaneous fittings/materials for plumber/Carpenter/mason of approved quality.

Oxidized Mild steel butt hinges 125*65*2.12 mm

Oxidized Mild steel butt hinges 75*47*1.70 mm

Anodised Aluminium handles 125 mm (ISI)

Anodised Aluminium handles 100 mm (ISI)

Anodised Aluminium handles 75 mm (ISI)

Anodised Aluminium sliding door bolt 300x16mm (ISI)

Anodised Aluminium Tower Bolts (ISI) 200*10 mm

Anodised Aluminium Tower Bolts (ISI) 150*10 mm

Anodised Aluminium Tower Bolts (ISI) 100*10 mm

Brass bib cock 15 mm (400 gm)

Brass stop cock 15 mm (400 gm)

CI gratings 150*150 mm

SCI gully/Nahni grating 100 mm

White vitreous EWC Pan of approved make

White vitreous china Wash Basin 630*450 mm

White vitreous WC, Orissa Pan of approved make

Brass full way wheel valve with CI wheel 25 mm

Brass full way wheel valve with CI wheel 40 mm

Brass full way wheel valve with CI wheel 50 mm

Brass full way wheel valve with CI wheel 80 mm

Gun Metal Non return Valve 40 mm

Gun Metal Non return Valve 50 mm

Gun Metal Non return Valve 80 mm

CP brass waste coupling 32 mm

CP brass waste coupling 40 mm

Plain float glass panes 4 mm thick (weighing 10 kg/sqm)

Brass cup board locks 6 levers 65 mm

UPVC pipe 4 kg/sqcm 110 mm dia

UPVC pipe 4 kg/sqcm 75 mm dia

UPVC bend 87.50-degree 110 mm

UPVC bend 87.50-degree 75 mm

CP brass Bib cock 15 mm (400 gm)

CP brass long body Bib cock 15 mm (690 gm)

CP Brass Angle valve 15 mm (400 gm)

CP Brass stop cock concealed

PVC flushing cistern 10 litres capacity

CP Brass with elbow operation lever bib cock 15 mm

PTMT Bib cock 15 mm

PTMT stop cock 15 mm

PTMT pillar cock 15 mm

White plastic seat with lid / brass hinges for EWC

Polyethylene water storage tank with cover and suitable locking arrangement Sintex /Aqua ISI marked

Silicone Sealant

GI hook and eye 75mm

PVC tank cover

PVC connection with brass union 45cm long

HP or LP brass ball valve with polythene float 25mm dia

CP brass Pillar tap for wash basins weighing not less than 650 gm

CP brass health faucet 15mm

PVC handle with lever for flushing cistern

Siphoning set with rubber washer

Flexible PVC waste 32mm

Flexible PVC waste 40mm

110mm PVC coupler

110mm PVC clip

PVC end cap 15 mm to 40 mm

110 mm dia door Tee PVC

110mm dia door elbow PVC

110mm bend PVC

PVC bend 15 mm

PVC bend 20 mm

PVC bend 25 mm

PVC bend 40 mm

PVC bend 50 mm

PVC elbow 15 mm

PVC elbow 20 mm

PVC elbow 25 mm

50mm door elbow PVC

CPVC coupler 25mm

CPVC coupler 32mm

GI sheet .80mm thick

APP modified plastic felt 1.50mm thick for small patches

GI wire mesh .63mm

Ply wood 6mm thick 5 layer, BWR

Bitumen primer for APP membrane

Tarpoline Plastic, thickness not less than 600 micron size not less than 20'x20'

Float glass panes 5 mm thick (12.50 kg/sqm) cut to size including wastage

Anjali/Jakwood in scantlings (excluding wastage to be measured)

Hydraulic door closer Tubular type Aluminium section body

100 mm mortice n lock 6 levers for Aluminium doors

Aluminium Grill as per IS 1868 (excluding wastage to be measured)

Prelaminated Particle Board both side decorative lamination Exterior grade 12 mm (excluding wastage to be measured)

Dash fastener/Chemical fastener for aluminium work

Powder Coated Aluminium sections (used at site excluding wastage)

Double action hydraulic door floor spring with stainless steel cover plate

Galvanised steel plain sheet used at site excluding wastage)

Second class moulded beading 50 x12 mm (Finished beading used excluding wastage)

Second class moulded beading 50 x20 mm (Finished beading used excluding wastage)

Credit for dismantled materials (payment to be made to ESIC in lieu of dismantled materials available while replacing with new fittings.

CP Brass bib cock 15 mm

CP bras stop cock 15 mm

CP brass angle valve 15 mm

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore.

40 mm nominal bore

50 mm nominal bore

80 mm nominal bore

15 mm nominal outer dia pipe

20 mm nominal outer dia pipe

25 mm nominal outer dia pipe

32 mm nominal outer dia pipe

40 mm nominal outer dia pipe

PVC CONNECTIONS 15 X300 MM

CP Brass pillar taps 15 mm

Fire Wood

ORIENTAL INTEGRATED FACILITY MANAGEMENT PVT. LTD.