SPECIAL REPAIRS TO MT YARD AND PUMP HOUSE AREA OF AGE E/M, GE UNDER GE FORT KOCHI

Amount

Dismantling wrought iron or mild steelwork of any description not otherwise provided for, all as specified and directed.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level), all as specified and directed.

M&L Cement concrete type A-1,1:1.5:3 (20mm graded aggregate)100 mm thick as in floor and finish the surface even and smooth without using extra cement, all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, all as specified and directed.

M&L backing coat 10 mm thick on brick or concrete surfaces in CM 1:4. for fixing glazed tiles in dado, all as specified and directed.

M&L Screed bed or bedding layer of mortar in CM 1:4 ,15 mm I thick for laying floor finishes, all as specified and directed.

M&L Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed.

M&L Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over backing coat and jointed with ditto asper item 13014, all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ridge etc, fixed with self-tapping screws as specified

M&L Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe 410-W(Gde E- 250) quality A, all as specified and directed.

Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ thickness of slab 100mm, all as specified and directed.

M&L Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of floor, 75mm thick, all as specified and directed.

S&F Chequered cement concrete tiles 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, all as specified and directed.

S& F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, all as specified and directed.

M&L Painting to new steel surfaces with synthetic enamel paint two coats over a coat of primer including preparation of surface, all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles, all as specified and directed.

M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10cm in width and setting in mortar, complete with PCC 1:3:6 Type C1 (20 mm graded aggregate), all as specified and directed.

S&F Plates (plain or chequered)channels, square cut or notched(ordinary and counter sunk)forming holes, without any attachment, Fe 410-w grade E-250A, all as specified and directed.

Rendering 15mm thick on fair faces of brickwork or concrete surfaces CM 1:4, finishing the surface even and smooth without using extra cement, all as specified and directed.

Providing and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soil, all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006of 80 mm thickness M-40 Grade with grey cement and pigment including laying stone aggregate chips(stone chips shall be paid separately as supply only), all as specified and directed.

Supply only coarse aggregate nominal size 10 to 12.50mm, all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on existing surfaces, all as specified and directed.

Material and labour for taking down old plaster and rendering 10mm thick in CM 1:6 on other than fair faces of brick or concrete surfaces finishing smooth and even and smooth without using extra cement making good match the old surface finish, all as specified and directed.

M&L two coat of OBD over a coat of primer on newly plastered surfaces of wall including cornices and preparation of surfaces, all as specified and directed.

M&L Two coats of white washing on new plastered surfaces of wall including preparation of surfaces, all as specified and directed.

M&L two coats of white wash on old surface of wall including preparation of surfaces, all as specified and directed.

M&L Plain cement concrete 1:3:6 type-C2 (40mm graded stone aggregate) 75mm thick as in plinth protection and finishing the surface even and smooth without using extra cement, all as specified and directed.

K R JOSEPH AND SONS (BID ID -3251471)

HIGH TECH ENGINEERS AND CO (BID ID -3256407)