Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC 791 2 ASHOK NIWAS RAJENDRA VILLA DEHRADUN ROAD ROORKEE 247667 DISTT HARIDWAR UK | HARIDWAR | UTTARAKHAND | 247667 | L1 | Accepted-AOC Awarded being L1 | |
| 2 | L2₹35.4 L+₹1.5 L (4.45%)Rejected-Finance VILL BHANGERI PO ROORKEE PIN 247667 | HARIDWAR | UTTARAKHAND | 247667 | L2 | Rejected-Finance Rejected being not L1 | |
| 3 | L3₹36.6 L+₹2.7 L (8.03%)Rejected-Finance | L3 | Rejected-Finance Rejected being not L1 | |
| 4 | L4₹37.4 L+₹3.6 L (10.6%)Rejected-Finance 61 2 JAURASI LANDHAURA HARIDWAR 247664 UK | HARIDWAR | UTTARAKHAND | 247664 | L4 | Rejected-Finance Rejected being not L1 | |
| 5 | L5₹37.5 L+₹3.6 L (10.6%)Rejected-Finance 264 2 GALI NO 7 RAM NAGAR ROORKEE DIST HARIDWAR UK | L5 | Rejected-Finance Rejected being not L1 |
Tender Value
₹48.8 L
EMD Value
₹97,680
Closing Date
29 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) ROORKEE
Garrison Engineer Roorkee
SPL REPAIR OF 07 ORs MD ACCN QTR NO P-147, P-131, P-132, P-133, P-135, P-141 AND P-145 OF 119 FD WKSP COY EME AT DOGRA LINE, PROVN OF HARD STANDING IN VEH REPAIR BAY IN 119 FD WKSP COY EME AND CERTAIN MINOR WORKS UNDER GE ROORKEE
2023_MES_611441_1
8392/287/E8
Open Tender
Civil Works
Item Rate
180 days
ROORKEE
As per tender documents
8 documents required · 8 mandatory
₹500
GE (MES) ROORKEE
₹97,680
Yes
18 Nov 2023
1 Aug 2023
1 Sept 2023
1 Aug 2023
29 Aug 2023
15 Aug 2023
Amount
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles etc complete all as specified and directed
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radious built in CM 1:6 etc complete all as specified and directed.
M&L Brick work with sub class 'B' bricks straight or curved on plan in any radius in half brick thick wall built in CM (1:4) etc complete all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) etc complete all as specified and directed
M&L 15 mm thick rendering in cement mortar 1:4 in side and out side wall of manhole of brick work/concrete surfaces finished even and smooth ( With out using extra cement) complete all as specified and directed
M & L for taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc and providing 15 mm thick rendering with cement mortar 1 : 6 finished even and smooth (without using extra cement) complete all as specified and directed.
M & L for taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc and providing 15 mm thick rendering with cement mortar 1 : 4 finished even and smooth (without using extra cement) including liquid WPC complete all as specified and directed. Note :- WPC shall be measured and paid separately.
S&F vitrified ceramic tiles 10mm thick (square/ rectangular) polished, light shade, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
S&F vitrified ceramic tiles 10mm thick (square/ rectangular) polished, light shade, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in as in vertical surface like dado/ skirting etc including 10mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for non skid joint free coloured ceramic tiles 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
Cutting chases, pinning in brick wall , making good to facing where required and pointing in CM 1:3 to ends or edges of slabs and making good cutting exc. 10 cm but n.exc 20 cm girth. Etc complete all as specified and directed
Demolition of RCC of any description and in any position complete all as specified and directed.
M & L for cement concrete type B-1, 1 : 2 : 4 in landings, cover slabs for manholes, kitchen platform etc and similar articles with plain faces, with plain fair faces, including chamfers, weathering, throating etc and setting in mortar incuding formwork complete with joints to match set in CM 1:6 complete all as specified and directed.
M & L Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F granite( of any type) stone slab of 20mm thick laid over 15mm thick cement screed bed in CM1:6 machine cut,size and jointed over grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and edge moulding complete all as specified and directed
M&L for PCC 1:4:8 type D-2 as in foundation, sub base of floor and mass concrete using 40 mm graded stone aggregate complete all as specified and directed
M&L for rendering 20 mm thick cement plaster in CM (1:3) finished even and smooth w/o using extra cement and using waterproofing compound on fair faces of brick work or concrete surfaces complete all as specified and directed NOTE: WPC will be measured and paid for separately.)
M&L Epoxy coating over prepared surface including the following: (1) Clean the surface free from dust, loose material etc. (2)Provide & fix 12mm dia. holes @1.5 mt. c/c on the entire area of the sunken portions. Apply chemical injection grouting through the GI Nozzle with cement slurry admixture with DURA EV (Non shrink Polymeric grouting compound) with 40 PSI Pressure pump. Seal off the holes and cutting the same after the grout has set. (3)Make Angular fillets or Gola with cement sand mortar (1:3) admixed with diluted DURAKRIT (1 Durakrit: 3 Water) at the junctions of the wall. (4) Wet the surface with water to make it SSD condition. (5) Apply one coat of DURAKRIT- Acrylic Polymer Modified Cementatious…(PMC) slurry coating as per manufacturer specification 1:2 (1 DURAKRIT : 2 cement) by weight on the sunken floor surface; turned up and finished up to 100mm from FFL. (6) Apply second coat of DURAKRIT - Acrylic Polymer Modified Cementatious slurry coating as per manufacturer specification 1:2 (1 DURAKRIT : 2 cement) by weight over the first coat at right angles. The second coat is usually applied after first layer slurry coat has touch dried usually after 4 hrs. (7) Ponding Test for water leakage will be carried out as per IS 3370 part 1 for seven days as instructed. NOTE: The work shall be carried through authorised applicator. Plan area shall only be measured for payment.
M&L for Bituminous water proofing treatment by applying bitumen tack coat @ 3.00 Kg per Sqm for receiving APP Membrane complete all as specified and directed.
M&L for laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not lessthan150gms/sqm) landon primed surface by forced application complete all as specified and directed
M&L for 75mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregte) as in floor, hard standing, plinth protection etc, laid in alternate bays n.exc 2.50 Sqm and joints filled with with mastic, filling finished even and smooth without using extra cement complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutter from the frame) n.exc 1.5 Sqm each complete all as specified and directed .
Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed .
Cutting holes in brick walls exc half brick wall but exc half bk wall but n exc one bk wall built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts and making good dismantled portion in CM ( 1:3 ) or cement concrete (1:2:4) type B1 as required complete all as specified and directed.
Taking down shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed.
S & F Factory made pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.
S & F Factory made pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.
M&L for Cement Concrete in Filling of pressed steel frame , using PCC 1:1.5:3 ,20mm graded stone aggregate, complete all as specified and directed
S&F MS framed work such as grills, gratings, hold fast etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bar, barred iron door, ladders, framed balusters, walk way, railings frame work of water tank and similar work confirming to Fe 290 Gde E165 complete all as specified and directed.
S & F Factory Made 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified
S&F Factory made 35mm thick IInd class hard wood glazed and skeleton shutters (without sash bars), open rebated and prepared to receive glass, gauze etc, edges of framing plain, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkat complete all as specified and directed .
S & F solid PVC door frame size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tubes, suppling and fixing in opening as per specification and drawing complete all as specified and directed .
S & F of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having PVC sheet strips of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail,bottom, lock rails on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet, beading, and joined together with solvent cement, suppliing and fixing in the frame at site as per specification and drwing complete all as specified and directed .
M&L for powder coated aluminium anodised window sliding type (3 shutters type) with sash bars, aluminium sections weighing 0.55 Kg/m(min) for shutter and 1.5Kg / m (min) for frame including stainless steel wire mesh , necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame, including S&F 5 to 6 mm thick plain glass and all as specified & directed by Engr-in-charge.
M&L for powder coated (50 micron thick) aluminium ventilator fixed type (partly glazed and partly gauzed) with gasket, glazing clip etc, weight of frame not less than 0.55 Kg/RM and weight of shutter frame not less than 0.425 Kg/RM including necessary joining cleats,rubber packing, anodised aluminium snap beading, screws suitable anodised fittings such as, hinges, including S&F 3 to 4 mm thick pin headed glass complete all as specified and directed.
S&F for powder coated (50 micron thick) aluminium grill of mesh size 50mm x50mm of 8mm thick, (weight not less than 2.5 Kg per Sqm) Complete all as specified and directed.
S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm Complete all as specified and directed.
M&L for preparing new wood and wood based surfaces by knotting, stopping etc of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for preparing old painted wood and wood based surfaces by knotting, stopping etc of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed.
S&F 300mm brass ordinary rat tail rod pattern springs including roller and rollerplate complete all as specified and directed.
S&F butt hinges 125mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed.
S&F butt hinges 100mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed.
S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.
S&F 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.
S&F 250mm long alumnium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed.
S&F in repairs, 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice & other side balancing white lamination, fixed with screws to wooden frame as in cupboard shutters, shelves including wooden beading at exposed edges complete all as specified and directed.
S&F 125mm long hasp and staple aluminium anodised including bolt to hinge plate and fixed screw complete all as specified and directed
M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade over 20 mm thick sand made with grey cement and pigment complete all as specified and directed.
M&L 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base etc complete all as specified and directed.
S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as rain water pipe and similar work including taking down old existing pipe. complete all as specified and directed.
S&F in repair 110mm PVC (SWR) bends any radius complete all as specified and directed.
S & F in repairs PVC (SWR) pipes single socketed (ISI Mark) in any length with rubber ring joints fixed to wall (75 mm bore) including taking down complete all as specified and directed.
S & F in repairs PVC (SWR) bends / elbow 75 mm (ISI Mark) complete all as specified and directed.
S&F in repairs, 15mm dia bore GI tubing (ISI marked), medium with all fittings and fixed to walls and ceiling or laid in floor including taking down existing tubing complete all as specified complete all as specified and directed.
S&F in repairs,20mm dia bore GI tubing (ISI marked), medium with all fittings and fixed to walls and ceiling or laid in floor including taking down existing tubing complete all as specified complete all as specified and directed.
Refixing old steel 15mm dia steel tubing and connections in new or old position (Walls, ceiling floors, etc) and including Taking up or down 15mm dia steel tubing and connections, including cleaning for re-fixing or removal to storecomplete all as specified and directed.
Refixing old steel 20mm dia steel tubing and connections in new or old position (Walls, ceiling floors, etc) and including Taking up or down 20mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Supply only liquid water proofing compound of approved quality complete all as specified and directed.
S&F in repairs chromium plated cast copper alloy stop cock fancy type (concealed type)screwed both ends high pressure for 15mm bore size iron pipe or ferrule complete all as specified and directed.. (Make : Prayag Cat No 7318 or Equivalent)
Dismantling and S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 Ltrs capacity including 20mm dia bore PTMT ball valve, hoisted and fixed in position and making all necessary connections with and including connectors of suitable size complete all as specified and directed.
S&F in repairs 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank complete all as specified and directed. Make : Prayag Cat No 7302 OR EQUIVALENT
S&F in repiars vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair size 580x440mm white with intergral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush) Complete all as specified and directed ( Make : prayag cat No 4051 or Equivalent)
S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified ( Make : Prayag Cat no 501S or Equivalent)
S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified. (Make : Prayag Cat No 7306 or EQUIVALENT ).
S&F for repair angle/ stop valves chromium plated , fancy type screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. (Make : Prayag Cat No 7310 or Equivalent)
S&F in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed.(Make : Prayag cat No 4645 or Equivalent)
S&F in repairs towel rail 600mm long 20mm dia brass chromium plated with brackets fixed with wooden guities embeded in cement mortar (1 : 3) with steel screws etc, complete all as specified and directed. ( Make : Prayag Cat No BA-1S or Equivalent)
S & F Glass shelf of PTMT fixed with and including chromium plated brass screws and wooden plated brass screw and wooden/ plastic cleats ( minimum weight 300 gms ) complete all as specified and directed.Make: Prayag cat no BEA-47AB or Equivalent
S & F in repairs looking mirror 5 mm thick with and fixed with chromium plated brass screwes and cup washers complete all as specified and directed.
M&L PVC floor trap ,plain with grating including jointing to waste pipe with solvent cement dia of outlet 75mm in repairs all as specified and directed.
S&F in repairs CP brass shower rose 125mm size shower with 300mm arm suitable for 15mm bore pipe complete all as specified. (Make : Prayag cat No. BS-79S)
S & F in repairs PVC connection 600 mm long with 2 Nos brass check nuts suitable for 15 mm bore of pipe with washer complete all as specified and directed.
S&F Waste fittings of PTMT full threaded 32 mm, in repair complete all as specified and directed.
Supply and fixing in repair fancy type medium grade 20mm to 25 mm bore Stainless steel pipe of required length for curtain rod including Brackets and knobs etc complete .
S&F in repairs, stainless steel sink without draining board, made out of 1.00mm thick stainless steel sheet for kitchen or laboratory, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, with plug, waste fittings, waste pipe, washers including cantilever type cast iron brackets, connecting union including bedding in cement mortar to dwarf wall etc complete and all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint by using Roller (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty), a coat of exterior water based primer, over 1mm thick wall care putty of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed.
M&L for preparation of new surface of internal wall by reputed paint manufacturers and applying two coats of acrylic distemper using roller over one coat of 1mm thick wall putty all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge . Note:- (i) The new surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction to the satisfaction of Engineer in Charge before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE
M&L for preparation of old decorated surface of exterior wall by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make and one coat of 2mm thick wall care putty all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.
Note for Item No. 83 and 85:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of exterior paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE.before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE before application of acrylic emulsion paint for each building. (v). The colour / shade will be all as approved by GE . (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor
M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper using roller over one coat of 1mm thick wall putty and two coats of distemper all as specified and prescribed by manufacturer of paint Ist Quality and all as directed at site by Engr-in-Charge .
M&L for Oil Bound Distemper two coats on ceiling over 1mm thick wall putty incl preparation of newly plastered surfaces.complete all as specified and directed by Engr In Charge.
M & L for complete removal of existing treatment on ceiling, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of ceiling and applying two coats of Oil bound distemper by Roller complete all as specified and directed.
M&L for rendering 10mm thick on ceiling plaster in CM ( 1 : 4 ) complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft loose soil and removal
M & L for hard core of broken stone or boulders of gauge n exc 63 mm , deposited , spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for 100 mm thick cement concrete type D2 1:4:8 (40 mm graded agg) as in sub base to floor complete all as specified and directed.
M & L for 50 mm thick cement concrete type B1 1:2:4 (20 mm graded agg) as in floor finishing surface even and smooth using extra cement laid panels and joints filled with bitumen mastic complete all as specified and directed.
M&L Glass dividing strips,3mm thick and 38 mm width,complete all as specified and directed.
M&L for rendering 15mm in CM 1:6, on fair faces of brick work finished even & fair all as specified.
M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of white wash
M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade over 20 mm thick sand made with grey cement and pigment complete all as specified and directed (Make:-ECO/KRISHNA/TULIP
M&L PCC 1:3 :6 type C-1 (using 40mm graded stone aggregate) as in surface channel & drain complete all as specified and directed.
Providing and applying wetbonded a 1.5mm thick double sided modified bitumen waterproofing membrane having release liner on both side for wet application on the RCC slab. The procedure involves the concrete to be saturated by water (use water hose). Any protrusions need to be removed and the concrete surface needs to be cleared. A bonding slurry (with approximate of 3 kg/sqm) is applied to the substrate. Then the memberane is unrolled and pressed into the fresh slurry after removal of the release liner. The long edges of the membrane are overlapped by miniumum 80mm and firmly pressed togther using a roller. The short edges of the membrance are ovelapped in the same way. The overlapped need to be staggered. System properties : Tensile strength 4N/sqmm as per ASTM D412; Elognation 200% as per ASTM D412; Resistance to tear 23 N as per ASTM D624; Joint Peel resistance 700 N/M as per ASTM D1876 at 23 Degree Celcius ; Joint shear resistance 220 N as per ASTM E154; Unaffacted Foldability at low tempreture as per ASTM D1970; Low tempreture flexibility is unaffacted over cycling over crack (100 cycl) as per ASTM C836; at -15Degree Celcius ; Resistance to lateral water migration 70M as per ASTM D5385 all complete as direction of Engineer -in-Charge.
M&L for plastering on wall or on floor 15mm thick in CM 1:4 mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. Note :- WPC shall be measured and paid separately.
Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.
Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified
Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified
Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-
One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.
One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.
One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed .
One light point controlled by two, two way piano switch 5/6 Amps complete all specified and directed.
All as per item No 4 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLS cable as earthwire complete all specified and directed.
S&F switch piano flush type white finish 5/6 Amps, single pole one way , 230 volts, 50 hz complete all as specified & directed.
S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.
S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz all as specified and directed
S &F socket out let 5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.
S&F switch piano flush type white finish 5 Amps, single pole two way, 230 volts, 50 hz complete all as specified & directed.
M&L bell push AC, SP 240 volts flush type 5/6 Amps, 230 volts, 50 hz complete all as specified and directed.
S&F bell ding dong elelctric 230V AC single pole all as speccified and directed.
S&F fan regulator , stepped type ,electronic (socket type),450 watt complete all as specified and directed.
Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting complete all as specified & directed.
S & F LED Bulb 9 Watt (cool day light) having colour temp 6500 K and lumen output 850 suitable for "B-22 type to fix on batten holder complete all as specified and directed.
M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as speccified and directed
Supply and fix in replacement of modular MCB protected plug top and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface all as specified.
Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar all as specified and directed.
Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.
Supply & fixing MCB, SPN, AC, 240 volts of 63 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.
S&F in replacement LED tube light batten 20 watts 4 fts extruded aluminium housing, translucent diffuser with LED light source , 2000 lumen, natural white ,surge protection range- 2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.
S&F Decorative ultra slim round profile LED Tube light fitiing with extruded polycarbonate, energy efficient for mirror light 9/10 Watt 2 ft with LED light source with uniform light output, fixed on site with all accessories all as specified & directed.
Supply and fixing in replacement integral LED building security light luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 25 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours including GI brackete made out of 25 mm GI pipe medium grade and MS clamps for fixing of light fitting complete and connected with three core PVC insulated PVC sheathed copper flexible cable with existing point all as specified and directed.
Supply and fixing sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 25 mm dia or more medium grade concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed Note: Three run of 6sqmm cable and one run of PVC conduit shall be measured as one unit
Supply and fixing sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 20 mm dia or more medium grade concealed in wall along with 4 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed Note: Three run of 4 sqmm cable and one run of PVC conduit shall be measured as one unit
Taking down old unserviceable ceiling fan & Supply & fix ceiling fan 1200 mm sweep single phase 240 volts double ball bearing with down rod , canopy, blades etc BLDC 5 star rated including connecting with twisted three core flexible copper conductor cable 0.5 sqmm from ceiling rose to connector of fan and writing MES No. on fan complete all as specified and directed. Note: Old Ceiling fan to be deposited in MES store Yard
S&F exhaust fan, metallic body, 300mm, 900 RPM with louvers, single phase, 240V AC including necessary fittings and M&L for fixing arrangement on wall with frame holdfastener, bolt, washer, etc including connection with PVC insulated PVC sheathed copper cable of size 0.5 sqmm from ceiling rose to connector including finishing and making good as per existing surrounded wall complete all as specified and directed. Note: Old Exhaust fan to be deposited in MES store Yard
S&F PVC air ventilation (exhaust) fan, 200mm with louvers, single phase, 230V AC including necessary fittings and M&L for fixing arrangement on wall with frame hold fastener, bolt, washer, etc including connection with PVC insulated PVC sheathed copper cable of size 0.5 sqmm from ceiling rose to exhaust fan including finishing and making good as per existing surrounded wall complete all as specified and directed.
Supply and fix in replacement electric water heater,storage type steel body with copper inner tank and heating element upto 1.5/ 2 KW capacity 25 litre, BEE 5 Star rated, ISI Marked, 240 V, 50 Hz complete with all accessories such as safety valve, thermostate, Plug top, NRV, Hot and cold water connection pipe all as specified and directed.
Supply and fix in replacement LED bulk head light fitting in aluminium housing with milky diffuser of capacity 10 watt complete all as directed.
Supply and fix GI tubing medium grade ISI marked of 40 mm bore dia includingg grouting it on wall for fixing of ceiling fan complete all as specified and directed.
M & L for clamp made out of flat iron of size 50 mm x 5mm suitable for fitting on 40 mm GI pipe for hanging of ceiling fan complete with nut bolts washer etc all as specified and directed.
M & L for Circuit/submain wiring with single core 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn through existing rigid PVC conduit for Inverter wiring complete all as specified and directed.
Supply and fix in replacement MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar of suitable size, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB/MCBs shall be measured and paid separately.
Supply and fix MCCB 100A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed.
Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 Volt , 10-60 Amp, single phase meter accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH all as specified and directed. Note: Old electronic meters to be deposited in MES store Yard
Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron,UL listed,CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit(resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7.The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS insulated copper conductor of size 6 sqmm, single core cable drawn through and including suitable dia of medium grade GI pipe upto 7 mtr incl cutting and chases on wall and floor complete all as specified and directed. Note: The rate quoted above shall be deemed to be included for excavation and earth work, refilling, removal of surplus earth and making good the surface around chemical earthing upto depth as per manufacturer direction completed all as directed by Engineer-in-Charge. Note : - On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (ii) Cost of copper strip upto 7 meter to the test point is deemed to be included in quoted rate. Additional copper/GI strip more than 7 mtrs will be measured and paid seperately under relevant items. (iii) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of CI cover. cover shall be seated on 40 x40x 6mm MS frame etc., complete all as specified.
Dismantling & taking out old unserviceable LT UG cable & Supplying, laying, jointing and testing LT underground cableof size 25 Sqmm 4 core, heavy duty, 1100 Volts, PVC insulated and sheathed, armoured with multi-stranded aluminium conductor cable conforming to latest IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable size all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends, including taking up of old existing cable, all complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items.
Excavation in trenches in soft/disintegrated soil not exc 1.5 m wide and not exceeding 1.5m in depth for laying UG cable/foundation etc complete all as specified and directed.
Returning filling in soft/disintegrated soil including spreading levelling watering and well ramming in layers n.exc 25cm each layer complete all as specified and directed.
Removal of excavated surplus soft/disintegrated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
M&L river washed and screeened dry fine sand filling in trenches below and above / around under ground cable for cable protection including punniing around cable complete all as specified and directed. Note Punned thickness shall only be measured for payment.
M&L for well brunt bricks sub class 'B' in old size as cable protection laid flat width wise complete all as specified and directed.
Labour and T&P for horizontal boring of hole passing through pavement/road/hardstanding by manual or mechanical means suitable for 50mm bore complete all as specified and directed
Supply and laid GI medium grade pipe for cable protection of size 50 mm dia complete all as specified and directed
Taking up or down galvanised steel tubing and connections of fany size and type compleate all as directed for 20mm bore complete all as specified and directed
Supply and fix galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall or ceiling of size 20 mm bore complete all as specified and directed.
Supply and fix or lay in trenches galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in trench of size 20 mm bore complete all as specified and drected
Drilling and tapping GI water mains 50mm bore (in position) for branch connections of the internal dia 20mm, complete all as specified and directed.
S&F straight plain brass ferrules (or connecting screws) screwed both ends and fixed to water mains for tapping branch connection of 20 mm bore pipe, complete all as specified and directed.
S&F gun metal globe or gate valves for 20mm nominal bore(Class-1) with iron wheel head ,srewed both ends for iron pipe ISI marked, complete all as specified and directed.
S & F bib tap of size 15 mm dia, cast copper alloy chrome plate fancy type screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for brass ferrule complete all as specified and directed.
Excavation in trenches not exc. 1.5 mtr wide and not exc 1.5 mtr depth in any type of soil (soft/loose/hard/dense soil) for laying / taking up/ taking down of water pipes of any size and type including levelling of bottom surface to required level all as specified and directed.
Returning filling in trenches including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick all as specified and directed.
Removing excavated material from site to a distance n. exc. 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr avove the starting point all as specified and directed .
Supply and fix new one air termination single pointed Aluminum rod 12 mm dia and 300 mm long all as directed by Engineer-in-Charge.
Supply and fix test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 03 Nos, 8 mm dia 25 mm long hexa, head screw all as directed by Engineer-in-Charge.
Supply and fix aluminium strip 25x3 mm with saddles and fixng screws etc for roof conductors and down conductors with porcelaine insulator along with GI screws as per requirement above ground level complete all as specified and directed by Engineer-in-Charge.
Supply and fix GI strip 32x6 mm buried on ground/surface all as directed by Engineer-in-Charge.
M&L cement concrete in foundation, fitting and mass concrete type C2 (1:3:6), 40 mm graded aggregate for install to air termination rod complete all as specified and directed
.M/L for tube light grade galvanised with fitting and fixed complete to wall and ceilling or laid in floors 40 mm bore complete all as specified and directed
M/L for chemical earthing with galvanised copper earth plate 60x60cmx3mm & copper earth strip 32x6mm, buried set directely in ground (Earth pit not less than 2.25 mtrs deep below ground levels) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to copper strip 32 x 6 mm as earthing lead by means of bolts, nuts, check nuts and wahsers of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point alongwith 40 mm dia earth protection pipe from top edge of the earth plate to main point to be connected provn of PCC using cement concrete 1:2:4 mix type B1 using 20 mm graded stone agregate and RCC pit cover 50 mm thick precast RCC 1:2:4 mix type B1 duly reinforced with 8 mm dia of MS bar @ 15 CIC with both way lifting arrangement complete incl necessary excavation & earth work and all as specified or directed including testing on completion.. Note : - On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (ii) Cost of copper strip upto 7 meter to the test point is deemed to be included in quoted rate. Additional copper/GI strip more than 7 mtrs will be measured and paid seperately under relevant items. (iii) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of CI cover. cover shall be seated on 40 x40x 6mm MS frame etc., complete all as specified.
Supply and fix sheet metal enclosure of 32 Amp 4 pole including with three phase plug & socket with neutral and earth complete all as specified. Make Indo Asian Model No DHDPBTN032 or equivalent in IndoAsian/L&T/Legrand
Supply & fix PVC insulated & sheathed copper conductor, 4 core cable of 2.5sqmm size complete all as specified and directed
Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10sq mm 4core cable complete all as specified and directed
Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 40mm, inner dia 38mm SDR-21 of 4kgf/cmsq with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified.
AMAR NATH SHARMA
VIMAL CONSTRUCTION CO
IRFANAHMAD CONTRACTOR
KISHORE CHAND DINESH CHAND
G.H. INFRASTRUCTURE PRIVATE LIMITED
M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS
RAJENDER CONSTRUCTION CO
M/S MSD & Associate
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .