4217 C.O on U.D Providing Bump and relevant Road Furniture works on Metro Route Junction in SD26 Jurisdiction (Ch-0 to Mahatma Mandir Metro Station)(relevant Road Furniture work on Metro Route)

BILL OF QUANTITIES

Item No Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

1 Cautionary Warning Sign (with Post):Providing and fixing Retro-Reflective type sign board of size 90x90x90cm of

steel structure to be provided as per drawing and design given by Engineer in charge. The road sign board steel

to be provided as per drawing and design of equilaternal Triangle as per the below size fixed with 01 no. of S.S.

304 grade pipe 63 mm OD Size /2 mm thick total 3.3 mt. in length with a foundation CC of 0.45 x 0.45 x 0.60 mt. in

M- 15 grade fixed with VHB Tape of suitable grade as per dimension given in drawing. The sign board face fully

covered with Retro reflective sheeting confirming to Type-XI of ASTM D-4956-09 and IRC 67-2022, on 4 mm thick

Aluminum Composite Material (ACP), over which symbols and numerals are made using either Screen Printing /

UV resistance durable overlay Filmas recommended by sheeting manufacturer in approved color pasted on

substrate by pressure sensitive adhesive with suitable size of VHB Tape with back support frame of SS 304 grade

square pipe 32x32x1 mm as per drawing by vertical support as per drawing mounted on SS pipe 63 mm OD (2

mm thick). Fixed with S.S. cleat 6 mm thick as per drawing etc. including all fixtures,materials, Labours, SS

polishing and transportation as per drawing and as directed by Engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be submitted by contractor with his own expensis. The contractor

should also submit SS Material test report from NABL Laboratory. (A) Class-C Type-11 Retro Reflective sheeting

2 Mandatory Warning Sign (with Post):- Providing and fixing 600mm Dia Retro-Reflective type sign board of steel

structure to be provided as per drawing and design given by Engineer in charge. The road sign board steel to be

provided as per drawing and design of 600mm Circule fixed with 01 no. of S.S. 304 grade pipe 63 mm OD Size/

mm thick total 3.3 mt. in length with a foundation CC of 0.45 x 0.45 x 0.60 mt. in M- 15 grade fixed with VHB Tape

of suitable grade as per dimension given in drawing. The sign board face fully covered with Retro reflective

sheeting confirming to Type-XI of ASTM D-4956-09 and IRC 67-2022, on 4 mm thick Aluminum Composite

Material (ACP), over which symbols and numerals are made using either Screen Printing / UV resistance durable

overlay Filmas recommended by sheeting manufacturer in approved color pasted on substrate by pressure

sensitive adhesive with suitable size of VHB Tape with back support frame of SS square pipe 32x32x1 mm as per 52.00 Each 10139.98

drawing by vertical support as per drawing mounted on SS pipe 63 mm OD (2 mm thick). Fixed with S.S. cleat

mm thick as per drawing etc. including all fixtures,materials, Labours,SS polishing and transportation as per

drawing and as directed by Engineer in charge. A warranty for 10 years for the Retro reflective sheeting from

originaa manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor with his own expensis. (A) Class-C Type-11 Retro Reflective

3 Place identification Signage: Providing and fixing of Place identification signage size 900x1500mm Made from

Retro-Reflective type made of steel structure to be provided as per drawing and design given by Engineer in

charge. Each signage to be fixed on Single or Double S.S. 304 grade pipe 63 mm OD Size /2 mm thick with a

foundation with CC of 0.45 x 0.45 x 0.60 mt. in M- 15 grade for each post & fixed with VHB Tape of suitable grade

as per dimension given in drawing. The sign board face fully covered with Retro reflective sheeting confirming to

Type-XI of ASTM D-4956-09 and IRC 67-2022, on 4 mm thick Alluminum Composite Material (ACP), over which

symbols and numerals are made using Latex/UV Digital Printing Technology and over laminated with UV resistant

Lamination Film as recommended by sheeting manufacturer in approved color pasted on substrate by pressure

sensitive adhesive with suitable size of VHB Tape with outer frame of SS 304 grade pipe 31.75 mm size/ 1.2 mm

thick and SS 304 grade support rectangle pipe frame 25 x 12 x 1 mm as per drawing by vertical support as per 52.00 Each 27291.33

drawing mounted on SS pipe 63 mm OD (2 mm thick). Fixed with S.S. cleat 6 mm thick as per drawing etc.

including all necessary fixture,materials, labours, machineries, SS polishing, transportation and fastening etc.

complete as per drawing and as directed by Engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from originaa manufacturer & a certified copy of 3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor with his own expensis. (A) Class-C Type-11 Retro

Reflective sheeting

4 Sign board per Sq.Mtr : Providing and fixing Sign board sign 1000mm x 1000 mm Retro- Reflective type sign

board of SS steel structure to be provided as per drawing and design given by Engineer in charge. The road sign

board steel to be provided as per drawing and design fixed with 02 nos. of S.S. pipe 63mm outer dia. Size 2mm

thick total 3.6mt. in length (each post) with a foundation CC of 0.45 x 0.45 x 0.6 mt. in M- 20 grade fixed with M.S.

plates and M.S. cleats as per dimension given in drawing.The sign board face fully covered with Retro reflective

sheeting confirming to Type-XI of ASTM D-4956-09 The sign board face fully covered with Retro reflective

sheeting confirming to Type-XI of ASTM D-4956-09 and IRC 67-2022, on 4 mm thick Aluminum Composite

Material (ACP), over which symbols and numerals are made using Latex/UV Digital Printing Technology and over

laminated with UV resistant Lamination Film as recommended by sheeting manufacturer in approved color pasted

on substrate by pressure sensitive adhesive with suitable size of VHB Tape with back support frame back support 15.00 Each 19004.81

frame of SS Round pipe of 32x1.2mm and SS rectangle pipe 25 x 12 x 1 mm as per drawing by vertical support as

per drawing mounted on SS pipe 63 mm outer dia (2mm thick) having Pipe Cap at Top. Fixed with M.S. cleat

mm thick as per drawing etc. including foundation as per drawing and as directed by Engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from originaa manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. The

contractor should also submit SS Material test report from NABL Laboratory. (A) Class-C Type-11 Retro

Reflective sheeting

5 Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin surface providing

and laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per

sqm area, thickness of 2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The finished

surface to be level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge

line/cut patta. The white color marking should provide liminance coefficinet on cemend road shalll be min 130 1006.50 Smt 632.46

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the service life during the day time. The marking

should meet the performance criteria for night time reflectivity, wet reflectivity and skid resistance as mentioned in

the section-15 of IRC 35-2015.

6 Standard Delineator: Providing and fixing of Standard Metal Delineator consisting of minm retro reflective unit

exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on

each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D

Type XI table specification. The delineator shall be painted with powder coat of minimum 40 microns thickness, on

top of which retro reflective sheeting shall be pasted on both sides. The structure shall be manufactured in roll

forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and

shall extend not more than 300mm below the ground while being installed. height of sheeting should be minimum

150mm whereas width of sheeting should not be less than 75mm (should be placed every alternative 15cm). The 312.00 Each 1027.17

front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta

angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for vehicles

moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets

vandal-proof. The delineator is meant for application on gaps in median, traffic islands, dangerous bends,

roundabouts, narrow bridges etc. or as desired by site engineer

7 STOP Sign:-Providing and fixingSTOP sign size 900mm Octagonal Retro-Reflective type sign board of steel

structure to be provided as per drawing and design given by Engineer in charge. The road sign board steel to be

provided as per drawing and design of 600x800mm Rectangular fixed with 01 no. of S.S. 304 grade pipe 63 mm

OD Size /2 mm thick total 3.6 mt. in length with a foundation CC of 0.45 x 0.45 x 0.60 mt. in M- 15 grade fixed with

VHB Tape of suitable grade as per dimension given in drawing. The sign board face fully covered with Retro

reflective sheeting confirming to Type-XI of ASTM D-4956-09 and IRC 67-2022, on 4 mm thick Aluminum

Composite Material (ACP), over which symbols and numerals are made using either Screen Printing / UV

resistance durable overlay Filmas recommended by sheeting manufacturer in approved color pasted on substrate

by pressure sensitive adhesive with suitable size of VHB Tape with back support frame of SS square pipe

32x32x1 mm as per drawing by vertical support as per drawing mounted on SS pipe 63 mm OD (2 mm thick). 21.00 Each 13173.65

Fixed with S.S. cleat 6 mm thick as per drawing etc.including all necessary fixture, labours, SS polishing,

transportation and fastnieng as per drawing and as directed by Engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from originaa manufacturer & a certified copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be submitted by contractor with his own expensis. The contractor

should also submit SS Material test report from NABL Laboratory (A) Class-C Type-11 Retro Reflective sheeting

8 Providing & Fixing Traffic Bollard Swiss type Jumbo made out of 18 gauage MS Sheet in Conical shape having

Dia 30 cms and top dia. 20 cms,Top Circular plate of 45 cms dia. For arrow,total height 188 cms and coated with

black epoxy powder coating and three yellow retroreflectove high intensity prismatic bands of 15 cms width

applied in the body and blue and white circular reflector on top plate,as per the drawing using High intensity 52.00 Nos 6474.18

prismatic grade ASTM Type 4 material,Fixed at site in M15 PCC having size 45 x 45 x 60 CM including all material

, labour, transport , fixing etc. complete as per directed by engineer in charge.

9 Supply and fixing of Convex Mirror made from Polycarbonate or acrylic lens, with 1000mm Dia, having viewing

angle of 130-160 degree. The convex mirror should be weather proof, impact resistant, and anti corrosion. The

mirror should be mounted on 65 NB poles with necessary fixtures or grouting in the ground with CC of 1:2:4 42.00 Rmt 2272.50

complete as directed by Engineer-in-charge

10 Providing and Fixing inbulit battery Solar Blinkers on existing pole and Solar Panel after removing required

existing Solar Blinkers acessory battery 12.8V, 6 Ah, LIFEPRO 4 with suitable charge controller maintenance free

Colour- Amber, with 200 mm Dia. 24 Hours flashing Blinker Aspect as per MoRTH Standards in accordance to 54.00 Nos 16475.12

IRC:93 and IS 7537 and as shown in the drawings in the code.

11 Facia Replacement for overhead signs: Sign board per Square Meter :-Providing and fixing sign boards made out

of 4mm ACP (Aluminum composite Panel); size as per design of IRC-67- 2012. Pre treated with phospheting

process & acid etching; reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM

D-4956 and latest M.O.S.T.Specifications; for each board shall be as per the instruction of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab with contractor's own expanses for the product offered shall 8.10 Smt 9714.08

be submitted by contractor with his own expensis including all necessary fixture, labours,lifting,machinary,

transportation and fastening etc complete as directed by Engineer incharge. (A) Class-C Type-11 Retro Reflective

12 Supply and fixing of Convex Mirror made from Polycarbonate or acrylic lens, with 1000mm Dia, having viewing

angle of 130-160 degree. The convex mirror should be weather proof, impact resistant, and anti corrosion. The

mirror should be mounted on 65 NB poles with necessary fixtures or grouting in the ground with CC of 1:2:4

complete as directed by Engineer-in-charge

Rupees Fifty Seven lakhs Ninety thousand Three hundred Eighty Four & Eighty Four Paisa only

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Capital Project Sub Division No.26 Capital Project Division No.1

Gandhinagar Gandhinagar