Tender ID

Kerala

Active

Works

Civil Works - Water Works

DEPOSIT Cherthala South Gramapanchayath Replacing 110mm PVC distribution line due to the construction of culvert near Ilengiyil ward 11 Pipeline Work

Kerala Water Authority

Cherthala | Alappuzha, Kerala

Amount: ₹76,487Closes: 20 Nov 20266d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published13 Nov 2026
Closes20 Nov 2026
Bid Opening21 Nov 2026

Tender Value

₹76,487

EMD Value

₹1,912

Closing Date

20 Nov 2026, 2:00 pm6d left

Tender Inviting Organisation

Name

Assistant Executive Engineer

Address

PH.SUBDIVISION KWA ,CHERTHALA

Work Description

DEPOSIT Cherthala South Gramapanchayath Replacing 110mm PVC distribution line due to the construction of culvert near Ilengiyil ward 11 Pipeline Work

Tender Information

Tender ID

2026_KWA_888127_1

Reference Number

WRD/KWA-CE(CR)/TR/5248/2025

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Percentage

Period of Work

60 days

Location

Cherthala

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

Requiredscanned copy of filled preliminary agreement (.pdf)

Requiredscanned copy of valid registration certificate (.pdf)

RequiredRequisition e payment, attested affidavit in plain paper and filled integrity form (.pdf)

RequiredBid document with NIT and special conditions (.pdf)

Requiredcopy of bid fee remittance and bid security remittance (.pdf)

RequiredForm of Tender No VI (.pdf)

RequiredBoq (.xls)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹1,912

Important Dates

Last Activity

13 Nov 2026

Published

13 Nov 2026

Bid Opening

21 Nov 2026

Download Starts

13 Nov 2026

Download Ends

20 Nov 2026

Submission Starts

13 Nov 2026

Clarification Period

13 Nov 2026 - 19 Nov 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (20 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Working charge and Material cost
1.001	15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road	4	sqm	443.5	₹1,774
1.002	100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.	4.8	cum	678.19	₹3,255.31
1.003	100.98.1008:Engaging Coolie.	1	no	1,082.18	₹1,082.18
1.004	100.7.1:Bailing out water with 5HP engine and pump set including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.	29.84	Kwh	39.35	₹1,174.2
1.005	100.8.2:Fencing 1.50m high with two rows of casuarina poles (girth 15cm to 24cm) tied with coir yarn on vertical casuarina pole (girth 15cm to 24cm) fixed at 1.5m intervals.	15	metre	111.98	₹1,679.7
1.006	100.37.5.1:In situ fabrication of M.S. pipes of size 100mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.	8	metre	4,594.23	₹36,753.84
1.007	100.37.5.2:Fabricating M.S. flanges of diameter 100mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.	2	no	1,277.24	₹2,554.48
1.008	100.37.5.3:Cutting 100mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	20	no	122.28	₹2,445.6
1.009	100.37.5.4:Welding 100mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	20	no	467.74	₹9,354.8

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

KWAGeneralConditionsforeTenderingV5.pdf

PDF • 0.69 MB

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

BOQ_1516311.xls

BOQ • 0.26 MB

bid.pdf

Tender Documents • 0.58 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Working charge and Material cost
1.001	15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road	4	sqm	443.5	₹1,774
1.002	100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.	4.8	cum	678.19	₹3,255.31
1.003	100.98.1008:Engaging Coolie.	1	no	1,082.18	₹1,082.18
1.004	100.7.1:Bailing out water with 5HP engine and pump set including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.	29.84	Kwh	39.35	₹1,174.2
1.005	100.8.2:Fencing 1.50m high with two rows of casuarina poles (girth 15cm to 24cm) tied with coir yarn on vertical casuarina pole (girth 15cm to 24cm) fixed at 1.5m intervals.	15	metre	111.98	₹1,679.7
1.006	100.37.5.1:In situ fabrication of M.S. pipes of size 100mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.	8	metre	4,594.23	₹36,753.84
1.007	100.37.5.2:Fabricating M.S. flanges of diameter 100mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.	2	no	1,277.24	₹2,554.48
1.008	100.37.5.3:Cutting 100mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	20	no	122.28	₹2,445.6
1.009	100.37.5.4:Welding 100mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	20	no	467.74	₹9,354.8

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Working charge and Material cost

1.001

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

sqm

443.5

₹1,774

1.002

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

4.8

cum

678.19

₹3,255.31

1.003

100.98.1008:Engaging Coolie.

1,082.18

₹1,082.18

1.004

100.7.1:Bailing out water with 5HP engine and pump set including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.

29.84

Kwh

39.35

₹1,174.2

1.005

100.8.2:Fencing 1.50m high with two rows of casuarina poles (girth 15cm to 24cm) tied with coir yarn on vertical casuarina pole (girth 15cm to 24cm) fixed at 1.5m intervals.

metre

111.98

₹1,679.7

1.006

100.37.5.1:In situ fabrication of M.S. pipes of size 100mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

metre

4,594.23

₹36,753.84

1.007

100.37.5.2:Fabricating M.S. flanges of diameter 100mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

1,277.24

₹2,554.48

1.008

100.37.5.3:Cutting 100mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

122.28

₹2,445.6

1.009

100.37.5.4:Welding 100mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

467.74

₹9,354.8