Budget 2016-17 - Improvements to Thenur Muchery Road KM 0/000 To 8/000 in Palakkad District

Amount

RAOD WORKS

55.4 : Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.7.a : Providing bitumen leveling coarse between 40mm and 150mm with 36mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen with pressure sprayer at the rate of 20 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores.

5.2.a : Tack Coat for bituminious surface :-<br> Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

5.7.2 : Close Graded Premix Surfacing/Mixed Seal Surfacing :- Type B <br> Mechanical means using HMP of appropriate capacity not less than 75 tonnes/hour.<br> Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.09 mm (Type-B) aggregates using viscosity grade bitumen (VG 30) to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade.

8.13 : Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface<br>Providing and laying retroreflective hot applied thermoplastic compound 2.5 mm thick applied with thermoplastic paint applicator machine including spraying additional glass beads type 2 @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads, all as per clause803.4 and IRC 35.The finished surface to be level, uniform and free from streaks and holes.

8.35 : Road Markers/Road Stud with Lense Reflector :- Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3

8.4.2 : Retro-Reflectorised Traffic Signs ( Type IV) : 60 Cm equilateral triangle <br>Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with Seven years as warranty manufactured per IRC :67 made of type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50 mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete minimum size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with two coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.

8.4.3 : Retro-Reflectorised Traffic Signs ( Type IV) : 60 cm circular<br>Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7 years as warranty manufactured as per IRC :67 made of type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50 mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete minimum size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with two coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.

8.4.4 : Retro-Reflectorised Traffic Signs ( Type IV) : 80 cm X 60 cm rectangular<br>Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7 years warranty manufactured as per IRC :67 made of type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50 mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete minimum size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with two coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.

8.6 : Direction and Place Identification Signs with size more than 0.9 sqm size Board (Type - IV) <br> Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC : 67 High Intensity micro Prismatic (Type IV) grade sheeting fixed over aluminium sheeting, 2 mm thick/aluminium composit material sheeting 4 mm thick with area exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on suitably designed GI pipe not less than 50 mm NB, 2 Nos, confirming to IS 1239, firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm X60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.

12.1.B.1 : Excavation for Structure :- Ordinary Soil - Depth upto 3m - Mechanical Means <br> Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

12.4 : P CC 1:3:6 in Foundation <br>Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.A.1 : PCC Grade M15 <br> Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications

12.8.1.C.1 : RCC Grade M20 - Using Concrete Mixer <br> Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications :-

12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

K.V.Ramesh

Proprator