GE/KHU-87/2024-25 REPAIR/ REPLACEMENT OF SECURITY LIGHTS AND EARTHINGS IN THE AOR OF AGE E/M KHUMBATHANG UNDER THE GE KHUMBATHANG

Amount

M&L for checking & repairing street lights/Flood lights/Tower lights/Highmast lights & other connected works as directed in army area daily and repairing of lights found unserviceable during checking or as per direction of JE/Engr-in-charge/men on complaint cell indcluding rectification of fault of cable/lights etc by deploying dkilled electrician, helper with all tools & plants, ladder, safety arrangements including providing minor materials like insulation tape and connected material by contractor to make light almost 100% serviceable complete all as specified and directed Engr-in-charge. Notes :- (i) Rate quoted shall be deemed to be included for required minor materials like insulation tape/repairing of junction box with lugs etc. (ii) Item like driver for LED and other items other than the materials mentioned above will be measured and apid seperately. (iii) Contractor shall provided labour everday at site for rectification/repair ans as per direction of Engr-in-charge.

Supply and fix in repair driver for LED lights as per exisitng make for the following (from Ser No (3 to 5)capacity :-

Driver for 60/70 watts LED

Driver for 40/45 watts LED

Driver for 30/35 watts LED

10. S&F in repair Junction box made out of FRP sheet of make SINTEX, ready made type having aluminium bus bar of capacity 100 Amps 4 Nos including bakelite connector of size 300x200x115 with necessary connector , MCB 6 Amps and entry of gland and fixing arrangement to fix the box on plinth/wall by providing MS clamp and nut bolt as per product code GSJB-3020 OF MAKE SINTEX or equivalent. Complete all as specified and directed by Engineer-in-Charge.

Supply, fixing, connecting and testing in replacement integral LED Flood light fitting, 70 watts, 230 Volts with pressure die cast aluminium housing IP66 with all accessories and connecting the same to electric source with using copper conductor 1.5 Sq mm PVC insulated flexible three core cable , including all accessories and fixing the light fitting to pole complete all as specified and directed. Make :- Havells/Philips/Osram or equivalent others make as specified.

Supply, fixing, connecting and testing in replacement integral LED Flood light fitting, 100 watts, 230 Volts with pressure die cast aluminium housing IP66 with all accessories and connecting the same to electric source with using copper conductor 1.5 Sq mm PVC insulated flexible three core cable , including all accessories and fixing the light fitting to pole complete all as specified and directed. Make :- Havells/Philips/Osram or equivalent others make as specified.

Supply, fixing, connecting and testing in replacement integral LED Street light fitting, 35 Watt 230 Volt with pressure die cast aluminium housing IP66 with all accessories and connecting the same to electric source with using copper conductor 1.5 Sq mm PVC insulated flexible three core cable , including all accessories and fixing the light fitting to pole complete all as specified and directed. Make :- Havells/Philips/Osram or equivalent others make as specified.

Supply, fixing, connecting and testing in replacement integral LED Street light fitting, 60 watts, 230 Volts with pressure die cast aluminium housing IP66 with all accessories and connecting the same to electric source with using copper conductor 1.5 Sq mm PVC insulated flexible three core cable , including all accessories and fixing the light fitting to pole complete all as specified and directed. Make :- Havells/Philips/Osram or equivalent others make as specified.

Supply, fixing, connecting and testing in replacement integral LED Street light fitting, 70 watts, 230 Volts with pressure die cast aluminium housing IP66 with all accessories and connecting the same to electric source with using copper conductor 1.5 Sq mm PVC insulated flexible three core cable , including all accessories and fixing the light fitting to pole complete all as specified and directed. Make :- Havells/Philips/Osram or equivalent others make as specified.

Supply and finxing in repair PVC insulated and PVC sheathed three core copper conductor of size 1.5 Sqmm for connecting from junction box/OH line to street light fitting through the brackets complete all as specfied and directed by Engr-in-charge.

S&F in replacment GI pipe light grade bracket 40mm dia, 1.5m long bent to shape as required for fixing of street lights on poles/walls including nuts, bolts, washers , Clamps (02 sets) of suitable size complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX 6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0 mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified and directed.

Supply and laying in replacement XLPE insulated screened PVC bedded galvanised steel strip armoured electric power dable heavy duty 1100 Volt grade with stranded aluminium conductor of size 10 Sq mm 4 core complete all as directed.

Excavation in trenches not exceeding 1.5m in depth deep for laying of pipe, cable, foundation of electric pole etc and getting out in hard soil, complete all as specified.

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.(Surplus soil if any shall not be removed but left over the trench)

Removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

Sand cushioning with clean dry sand to cables with layer of sand 8cm before laying of cable and 15cm thick after laying of cable complete all as specified. Note : For payment purpose punned thickness of 18cm shall be measured against spread thickness of 23cm as mentioned in para 19.75 of SSR part-I.

M & L for providing PCC cable cover class LV type-I of size 250x150x40mm laid in perpendicular to the cable abutting each other all as specified and directed at site.

Deduct Credit for Demolished/Dismantled material Rs (-) 65475.00 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S TRADE LINK (BID ID -3255745)

M/S MOHD FAROOQ (BID ID -3255502)