8457/E8 SPECIAL REPAIR TO BLDG NO P-304 IN OFFICERS COLONY AND PRIMARY WING BLDG NO P-5 AND P-5A IN ARMY PUBLIC SCHOOL AT RTS AND DEPOT HEMPUR UNDER GE (EAST) BAREILLY

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises as directed

Material and labour roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust incl. brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed

Material and labour light shed vitrified Ceramic tiles 9mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

All as per item No 3 but in skirting, vertical surface dadoes and riser etcover and including 10mm thick rendring in CM (1:4) complete all as specified and directed.

Material and labour for glazed ceramic tiles coloured of size 350 x 450 x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles over and including 10mm thick rendring in CM (1:4) complete all as specified and directed.

Material and labour for non skid-ceramic tiles coloured of size area of each tile exc.0.06 sqm but not exc . 0.11 sqm (300 x 300 mm) X 6mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to match over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

M&L for cement concrete (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) 25 mm thick as in floor for receiving screed bed of floor tiling complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed.

M & L 16 to 18 mm thick granite(Zed Black colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding,round bull nosing edging and polishing as in kitchen platform/dado/skirting /plateform counter top WHB in cluding cutting holes for oval shape /urinal partitions etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed by Engineer-In- Charge.

M&L Hardcore of broken stones gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface including removal of existing loose soil complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete.

Taking down shutter and refixing with easing cutting or necessary repair in same opening of any description exc. 1 sqm but n.exc 2 sqm each

Supply and fixing of second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned and joints all as directed and specified by Engr-in-Charge

S&F 125X60mm pressed steel frames for doors with one or more rebates, one shop coat of priming and including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item ).

Supply and fixing Pressed steel frame for doors of size 105 x 60 mm with one or more rebates one shop coat of priming and including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item ).

M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) for fixing of hold fast/filling pressed steel door frame including necessary form work complete all as specified and directed.

Supply and fixing 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete.

S&F 30mm thick flush shutters, solide core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S & F 35mm IInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded ,fitted with cut and mitered bead for securing glasses etc, window ventilators etc are provided with styles and rails as specified in SSR Part-I, 1991, Section- 8, Clause 8.20(b), complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and provision and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Supply and fixing aluminium handles extruded type of size 150 mm, complete all as specified and directed.

Supply and fixing 200 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete.

Supply and fixing 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

Supply and fixing in repair 300 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as directed.

S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i) frame :45.2mm x35mm X 1.15 mm (ii) Aluminium beading - 0.7mm thick (iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing.(iv) Aluminium neccessary fittings complete as required.(v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

Supply and fixing galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete .

Supply and fixing in repair 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, beads or in steel windows complete all as specified and directed.

Supply and fixing in repair 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality and description) from wooden frames/steel frames, glazed with putty or fixed with beads and Supply and fixed, 3mm sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane, complete all as specified and directed.

Supply and fixing for figured glass, 4mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as in repairs complete all as specified and directed.

S&F in repairs vitreous China water closet Orissa pattern of size 580x440mm , white, with 'P' ro 'S' trap and integral foot rest, front or back inlet and flush pipe of polytheylene 32mm dia for low level cistern including provision of cement concrete bedding complete all as specified and directed.

Supply and fixing in repair Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointingcomplete with fixing bolts complete

Supply and fixing in repair light coloured vitreous china counter top oval shape wash basin white available shape as approved of 550mmx400mm (minimun) on new pre-painted brackets excluding taps but including 32 mm bore waste fittings, brass, chromium plated etc complete all as specified .

S&F in repairs of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed.

S&F 15 mm Brass wash basin mixer, centre hole, mixing hot & cold water, fancy type, with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed by Engr- in- Charge.

S&F in repairs 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed.

S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Toilet paper roll holder chromium plated fixing complete all as specified and directed by Engr in charge.

S&F in repairs handshower (Health faucet) with 8mm dia 1 meter long flexible tube and wall hook fixed in repairs

S&F in repairs chromium plated/SS grating square slit 150 mm dia with or without waste hole complete all as specified and directed.

Supply and fixing in repair glass self made out of 5mm thick 600mm long x 150mm glass piece round edged, SS railing fixed to wall with 2 nos heavy duty SS bracket. Make:- Jaquar(Continental) or equivalent

Supply and fixing in repair corner glass self made out of 5mm thick 225mm x 225mm size glass piece round edged, SS railing fixed to wall with 2 nos heavy duty SS bracket.

Supply and fixing in repair of fancy type three handle wall mixer, chromium plated with or without lettered Hot or Cold with a single unit fitted on wall and fixing for pipe of 15mm bore make as given in list of makes as directed by Engineer-in-charge

S&F CP brass Chromium plates angle Stop valves of 15mm bore screwed for 15mm bore iron pipe or union complete all as specified.

S&F in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and direceted.

S&F PVC connection 15mm size PTMT nuts of length 450mm.

S&F in repair bib taps cast copper alloy 15mm bore with fancy chromium plated with long shank screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed

Supply and fixing rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc and 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball including taking down existing tank complete .

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe.

S&F inreapir 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick on both side , and all around side faces is covered with decorative lipping complete prepared as cup board shutter and fixed with wooden frame-work complete alll as specified and directed

Extra over rate for item No 56.00 above for prelaminated partical board for external teak wood lipping 6mm thick fixed with nails complete.

Material & labour in repair for 2nd class hard wood plain fillets, square, rectangular in section, making rebates for fixing prelaminated cupboard shutters clean sawn, secured with nails or brads in sectional area exc 13 & n. exc 25 sq. cm fixed with nails

Supply & fixing in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of width of flaps (when open) in 30mm

Supply and fixing in repair for 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw as per specified.

Supply and fixing aluminium handles extruded type of size 125mm, complete all as specified and directed.

S&F for 18 mm thick plywood with 7 layers of ply for kitchen cabinet , and fixing sunmica over board with approved pattern decorative coloured laminate type 1 of 0.9mm thick, and all around side faces is covered with decorative lipping complete prepared as in cup board/cabinet shutter and shelves and 6mm thick ply back side of cabinet fixing with approved screw complete all as per manufacturers instruction specified and directed.

S&F for Hydraulic Soft close Auto hinges, Thickness 1-1.5 mm, size 8 Inch brass finish 90 Degree opening angle silver colour complete all as specified and directed by Engr-in-Charge.

S&F Drawer/cupboard handles, projection drop (65mm to 75mm) on screwed plate of brass polished/ SS, bright finished complete all as specified and directed.

S&F for telescopic channel of size 450 mm (when closed), for fixing kitchen basket in it, mild steel chromium plated, roller type, heavy duty fixed to wooden/ metal frame with SS screws complete all as specified and directed.

S&F for kitchen basket fabricated with stainless steel section (SS-304), of best quality of size 430 mm x 508 mm x 200 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position on one pair telescopic channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty complete all as specified and directed.

S&F for kitchen basket fabricated with stainless steel section (SS-304), of best quality of size 430 mm x 508 mm x 100 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position on one pair telescopic channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty complete all as specified and directed.

S&F in repairs Stainless steel sink with drainage board, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar 1:4 on to dwarf/parapet wall or fixing with granite with pointing in white or grey cement to match or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm all as specified and directed..

Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removal to stores all as directed

S&F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F steel tubing 15 mm bore medium grade,galvanised with all fitting and fixed complete to walls and ceiling or laid in floor etc all as directed and specified by Engr-in-Charge

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth on stone, concrete block walls orslab walls etc all as directed and specified by Engr-in-Charge.

Dismantling of cast iron pipes or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches if required upto 100mm bore including fitting complete all as specified and directed.

S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.

S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints, laid in trenches/floor if required or fixed to walls complete all as specified and directed.

S&F for PVC (SWR) bends of 110 mm bore and any radius with or with out access door complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bend in any radius with or with out access door complete all as specified and directed..

S&F of 110 mm bore PVC (SWR) Junction single equal or un-equal complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) Junction single equal or un-equal complete all as specified and directed.

S&F PVC (SWR) vent cowls suitable for 75mm bore pipe complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete type D2 (1:4:8)(40mm graded aggregate) as in sub base of floor, path etc,complete all as specified and directed.

M&L for Endura Non Skid joint free colour tiles 8 to 10 mm thick (square/ rectangular) area of each tiles not exceeding 0.11 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15cm in CM (1:6) complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc.

Material and labour for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces finishing the surface even and smooth without using extra cement complete.

-Ditto- all as per Srl item No.87.00 here-in-before, but 15mm thick in cement mortar 1:4 finished fair and even using integral waterproofing compoundincluding provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete all as specified and as directed by Engineer in charge.. Note:-Supply only of W P C shall be measured and paid separately.

M&L for 5 mm thick rendering over fair face brick or concrete surface in cement plaster 1: 3 finishing the surfaces fair & even without using extra cement in ceiling complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with subclass 'B' bricks, straiight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

All as item above here-in before but half brick complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, slabs, floors(other than ground floors) beams, staircases, landing, chajjas, and similar works reinforcement cut as required to facilitate as demolition all as directed and as specified.

M/L RCC 1: 2 : 4, type B1 using 20 mm graded stone aggregates as in slabs on walls, Chajja, beams and columns in floors, roofs, landings, balconies, selves, canopies, deck slabs and in shelves, Manhole cover, chajja and the like etc all as specified and as directed

M/L Mild steel TMT bars 10mm dia and overs, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secured with clips including welding new to old (if required) all as specified and as directed.

Ditto- but 5 mm dia and over upto and including 10mm dia in Stirrups, spacers and binders

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or sloping) rough finished surfaces of concrete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, windows, cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 10 cm but n. exc 20 cm wide rough finished of concrete all as specified and directed.

M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.

Demoliton of cement concrete of any description & in any position not otherwise specifically provided for and complete all as specified and as directed.

supply Integral water proofing Liquid of Dr fixit/sika/Fosroc

M&L for brushing neat cement slurry with 3.0 kg of cement per square metre complete all as specified and directed.

M&L cement concrete 1:2:4 mix type B-0 (12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and fair (without using extra cement) of average thickness 40mm in slope as required over roof complete all as specified and directed.

M&L for 10mm thick plastering in CM(1:4) on concrete roof surfaces using water proofing compound @ 3% by weight of cement and finishing the surface even and fair including taking down existing plaster and APP membrane all as specified and directed.Note :- WPC shall be measured and paid separately.

M & L for cool roof antislip tiles 300x300x10 mm with high SRI value not less than 90 laid over existing treatment on accessible roof and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on ceiling complete all as specified and directed.

Mateirial & labour for Preparation of old decorated surfaces on walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on walls complete all as specified and directed.

M&L for complete removal of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails and applying of two coat OBD on wall over including a coat of primer applied and a coat of 1mm thick wall care putty compelet all as specified and directed.

M&L complete removal of existing treatment and for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge.

Material and labour for Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete.

Material and labour for preparation of old wooden based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.

All as per item above but one coat of synthetic enamel paint over old/New steel surfaces complete all as specified and directed by Engr-in-Charge.

M&L for two coat OBD on newly plastered wall surface over including a coat of primer applied including a coat of 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered walls surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge.

M&L for precast machine pressed cement concrete tiles of size 250x250x20-22mm or 300x300x20-22mm with grey cemet and no pigment, set jointed and pointed in neat cement slurry in floors, and cut and polished laid over and including 15mm thick cement mortar screed in 1:4 complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc.

M&L for coloured highlighter tiles in vertical surface 350 x 250 x 7 mm/ 450X350X7mm thick set and jointed over and including 10 mm thick rendering even and rough in CM 1:3 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 in two layers of 10mm and 5 mm each including using WPC @ 2 % by weight of cement in finishing layer on brick or concrete surfaces finished even & smooth all as directed and specified by Engr-in-Charge

M&L rendering 10 mm thick in CM 1:4 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Demolition of Concrete is ground floors andy pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed by Engineer-in-Charge.

M & L 25 mm thick PCC 1:2:4 type B0, using 12.5mm graded aggregate as in floors to receive surface of tile complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.20mm thick with rawl plug (b) Middle/style rail : 85x44x1.20mm thick (c) Bottom/top rail : 114x44x1.20mm thick (d) Aluminium beading : 0.7mm thick (e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu marked or its equivalent approved make) (f) Making good of wall surface to match with existing surface complete.

M & L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm x 78.2mm grills thickness shall be of 6.4mm x 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 x 11mm x 1.7mm thick fixed with screw inside of the window complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe, tank cover etc including taking down existing tank complete .

S & F in repair, Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete.

S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia steel water tubing, galvanized, medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed

Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type.

Supply and fixing in repairs of fancy type chromium plated Bib tap, 15mm bore any make as given in list of makes as directed by the GE.

Supply and fixing in repair of CP brass fancy type stop cock with long shank & as concealed type/ angular type .

S&F in repair stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified.

S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F for PVC (SWR) pipes 110 mm bore of pipe, single socketed in any length with rubber ring joints fixed to walls including repair and replacement old pipe all as specified and directed.

S&F 75mm dia PVC (SWR) pipe and single socketed in any length with rubberring joint laid in trenches or in floor including repair and replacement old pipe all as specified and directed.

S&F 75mm bore PVC (SWR) junction (single ‘T’) equal or unequal.

S&F 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern as in roof covering etc

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws with washers as specified

S&F for Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A.

Taking down carefully copper/ aluminium point wiring ie. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and removing the items from site to store for taking credit (Credit for above items should be made as per conditions seperately) and making good disturbed surfaces of ceiling, walls, floors, etc complete all as specified and as directed.

Disconneting and taking down for main switch / MCB DBs including MCBs etc of any size and removing the items from site to store for taking credit (Credit for above items should be made as per conditions seperately) and making good distrbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and as directed.

Disconnecting electric connections and taking down for ceiling/Exhaust fans dismantling blades and removing fan and blades to store for keeping in safe custody for BER Board complete all as specified and as directed.

Taking down sub main wiring including earth wire and removing from site for taking credit and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and as directed.

M & L in replacement of point wiring using proper colour coding complete all as specified with 1.5 sqmm PVC insulated FRLS/FR-LSZH unsheathed 1100 volts multistranded copper conductor two single core cable (Red and Black colour) confirming to IS 694:1990 Part-II with and including non metalic rigid PVC Conduit 25mm dia medium grade with all accessories including cutting chases pinning in, for concealed conduit wiring in wall/ceiling/floor/roof etc, making good of disturbed surface not exc 15cm girth, modular metal flush box or modular sunk pressed steel terminal box not less than 2mm thick, 50mm deep, covered with modular white cover plate (Outer cover) with frame (inner) including 1.5 sqmm PVC insulated FRLS unsheathed 1100 volts multistranded copper conductor one single core cable (Green colour) confirming to IS 694:1990 Part-II as continuous earth wire connected to common earth dolly all as specified and as directed for the following:- (a) One light/fan/exhaust fan/bell point controlled by one modular switch/bell push. NOTE :- (i) Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm. (ii) Modular white cover plate (Outer cover) with frame (inner) etc shall be measured and paid seperately under respective items.

(b) -Ditto- all as per above Sch "A" Item No. 148.00 but one 3 pin modular socket outlet 5 Amp on the same board with other switch.

(c) -Ditto- all as per above Sch "A" Item No. 148.00 but one 3 pin modular socket outlet 5 Amp independent board.

(d) -Ditto- all as per above Sch "A" Item No. 148.00 but one light point controlled by two, 2-way modular switch.

(e) -Ditto- all as per above Sch "A" Item No. 148.00 but one 3 pin socket outlet 15 Amp independent board with 2.50 sqmm PVC insulated FRLS unsheathed 1100 volts multistranded copper conductor single core cable (Red, Black and green colour) confirming to IS 694:1990 Part-II.

S & F in replacement of Modular white cover plate with frame 1 Module complete all as specified and as directed.

S & F in replacement of Modular white cover plate with frame 2 Module complete all as specified and as directed.

S & F in replacement of Modular white cover plate with frame 3 Module complete all as specified and as directed.

S & F in replacement of Modular white cover plate with frame 4 Module complete all as specified and as directed.

S & F in replacement of Modular white cover plate with frame 6 Module complete all as specified and as directed.

S & F in replacement of Modular white cover plate with frame 8 Module complete all as specified and as directed.

M & L in replacement of modular switch, 1 way 6 Amp, 1 module

M & L in replacement of modular switch, 2 way 6 Amp, 1 module

M & L in replacement of modular bell switch 6Amp, 1 module

M & L in replacement of modular switch, 1 way 16 Amp, 1 module

S & F in replacement of modular socket 6Amp, 2/3 pin, combined 2 module.

S & F in replacement of modular socket 6A/16A, 2/3 pin combined 2 module.

M & L in replacement of buzzer, ding dong, AC, 230V single pole.

S & F in replacement of ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body of size.

S & F in replacement of Lamp holder (Batten/Angle) PVC/Polycarbonate type with back plate for batten/angle fittings, complete all as specified and directed.

S & F in replacement of Lamp LED ADORE PLUS 1 x 9 Watts, CDL, 3 Star rating, heat sink white with Polycarbonate diffuser, B-22 base cap, retrofit type, 220/230 volts, complete all as specified and directed.

Supply and fixing in replacement of LED lights fitting 1x 20 Watts (T-8), 4 feet long, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings, complete all as specified and as directed.

Supply and fixing in replacement of LED light fitting 1 x 10 Watts (T-8), Mirror type with high out put diffuser 2 feet long, 220 Volts, AC decorative type with driver holder and LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings, complete all as specified and as directed.

Supply and fixing in replacement of Decorative wall light fixture made up of Polycarbonate, suitable for 1 x 9 Watts, retrofit LED lamp, B22 base, CITY-2, 220 Volts, AC, complete all as specified and as directed.

S & F in replacement of LED light fitting 1x9W/1X10W Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with LED Lamp 1 X 9/10watts, complete all as specified and as directed.

Supply and fixing in replacement of Wall mounting fans 230 volts. single phase, 50 Hz, 1450 RPM, Oscillating 400 mm sweep suitable for wall mounting, made of metal body, Copper winding including connecting up with three core flexible copper conductor cable for suitable size and wall mounting fastener bolt, nuts & washers etc, complete all as specified and as directed.

S & F in replacement ofSupply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

M&L in replacement of sub main wiring with two single core PVC insulated unsheathed FRLS/FR-LSZH copper conductor 1100 volt grade multistandard conformng to confirming to IS 694:1990 Part-II of size 4.0 sqmm and drawn through & including concealed rigid non metalic PVC conduit not less than 25mm dia medium grade with all accessories fixed on wall/ceiling/surface (ISI marks), one run of 4.0 sqmm copper wire for earth continuity wire and connected of common earth dolly including cutting chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed. Note:- One run of rigid non metalic PVC conduit 25mm dia medium grade, three run of 4.0 sqmm copper conductor is measured as one unit.

Supply and fixing in replacement of Exhaust fan 250mm sweep, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, 1200 RPM, Copper winding including connecting up with three core flexible copper conductor cable for suitable size and wall mounting fastener bolt, nuts & washers etc, complete all as specified and as directed.

Supply and fixing in replacement of Ceiling fan 1200mm sweep, complete with blades, down rods, Electronic regulator and accessories, 230 V, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including connecting up with three core flexible copper conductor cable for suitable size, complete all as specified and as directed.

Supply and fixing replacement of Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece- 2 Nos etc, including connecting up with three core flexible copper conductor cable for suitable size and wall mounting fastener bolt, nuts & washers etc, complete all as specified and as directed.

S & F in replacement of Sheet metal enclosure 20Amp SP (2P+E) with Metal plug and socket DBs suitable for protection of appliances like AC/Geysers etc complete with one MCB single pole 20Amps, 240Volts including connection, testing and making good the disturbed surfaces, complete all as specified and as directed.

S & F in replacement of sheet metal enclosures MCB SPN DBs 4 Way, 240 Volts, 50Hz, AC, double door suitable for flush mounting and surface mounting with 200 Amp copper bus bar for phase, including connection, testing and making good the disturbed surfaces complete all as specified and as directed.

S & F in replacement of sheet metal enclosures MCB SPN DBs 12 Way, 240 Volts, 50Hz, AC, double door suitable for flush mounting and surface mounting with 200 Amp copper bus bar for phase, including connection, testing and making good the disturbed surfaces complete all as specified and as directed.

S & F in replacement of sheet metal enclosures MCB TPN DBs 4 Way, 415 Volts, 50Hz, AC, double door suitable for flush mounting and surface mounting with 200 Amp copper bus bar for phases including connection, testing and making good the disturbed surfaces complete all as specified and as directed.

S & F in replacement of miniature circuit breaker (MCB), Triple Pole & Neutral 40 to 100 Amp, rating 415V, 10 KA current carrying capacity, 'C' curve fixing in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

S & F for miniature circuit breaker (MCB), Single Pole & Neutral 40 to 63 Amp, rating 240V, 10 KA current carrying capacity, 'C' curve fixing in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

S & F in replacement of miniature circuit breaker (MCB), Single Pole 6 to 32 Amp, rating 240V, 10 KA current carrying capacity, 'C' curve fixing in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

Taking down Geysers and disconnecting water & electric connections, removing to store for keeping in safe custody for BER Board complete all as specified and as directed.

S & F in replacement of GI Bracket made out from GI pipe 25/32mm dia bend to shape as required, 1.2Mtr long fixed on wall with flat iron clamps of size 25 x 4mm - 2 Nos with the help of bolts, nuts, washers etc for fixing of security light fitting, complete all as specified and as directed.

Taking down old service connection/UG Cable removing of site complete all as directed.

Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 35 sqmm x 3.5 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles etc, complete all as specified and as directed.

Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 16 sqmm x 2 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles etc, complete all as specified and as directed.

Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 10 sqmm x 2 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles etc, complete all as specified and as directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for laying of electric cables or water pipe etc, not exc 10 sqmm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. Note : Rates includes removing of paver blocks carefully and stack properly for refixing after laying of cables .

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified.

Material and labour for river washed and screened, dry sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I and as directed. Note :- Only compacted thickness of sand will be measured and paid separately.

S & F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade not less than 0.45 mtr wide for repairing road cut/footpath carried out under Sch "A" items

Removing and Re-laying for machine pressed precast concrete interlocking paver block any shape and size for repairing road cut/footpath carried out under Sch "A" srl items.

Supply, laying un-reinforced precast concrete cable cover class LV type 1 flat size 250mm x 150 mmx 40 mm.

Material and labour for Horizontal directional drilling (HDD) is a streeable trenchless method of Laying (installing) underground cables in a shallow arc along a 40mm/50mm bore path by using a surface-launched drilling rig, with minimal impact on the sorrounding area complete all as specified and as directed by Engr-in-charge.

M&L for GI pipe ,light grade 40mm dia for road crossing of cable for cable protection laid in trenches or above ground surface, complete all as specified and directed.

M & L in replacement Earth continunity conductor or main earth ing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of 4.00 mm dia GI or steel wire all as specified.

M&L for Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of SSR PT- I testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) type B1 cover slab with one handle made out of 8mm dia round bar, watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & charcoal alternative layers, necessary excavation earth work, including earthing test point all as specified or indicated including testing on completion and as directed.

Supply, laying, conecting and testing of ISI marked GI steel water tubing medium grade Including S & F all fittings and fixed complete to walls and celling or laid in floors complete of following sizes :-

(a) 50 mm bore

(b) 40 mm bore

(c) 25 mm bore

S & F 25 mm bore Gun metal globe valve or gate valve with iron wheel head , screwed both ends with 01 No union for iron pipe heavy duty with ISI marked all as specified and directed.

S & F 50mm bore Gun metal globe valve or gate valve with iron wheel head, screwed both ends with 01 No Union for iron pipe heavy duty with ISI marked all as specified and as directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for laying of electric cables or water pipe etc, not exc 10 sqmm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. Note : Rates includes removing of paver blocks carefully and stack properly for refixing after laying of cables .

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified.

Shikhar ji Enterprises (BID ID -3469100)

REHAN CONSTRUCTIONS (BID ID -3477849)