REPAIR/MAINT OF INTERNAL WIRING AT ZONE I AT PATTAN AND REPAIR/REPLACEMENT OF LT PANEL,MCCB,STARTER,UG CABLE AND ACSR CONDUCTOR AT BARAMULLA AND PATTAN UNDER GE 969 EWS

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in width and not exceeding 1.5 mtr in depth for laying of cables up to proper level complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed.

Removing surplus exacavated material from excavation not exc 50 meter and depositing where directed at a level not exc 1.5 meter above the starting point complete all as specified and as directed.

Supply and filling dry river sand in trenches including spreading for cushioning of LT UG cable and punning down complete all as specified and as directed. Note : Punned down thickness shall be measured and paid

M&L for well burnt as class 'B' bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench complete all as specified and as directed.

M&L for XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheather laying in trenches/cable ducts, fixed to wall/pole complete all as specified and directed of following sizes

(a) 3.5 core 120 Sqmm

(b) 3.5 core 95 Sqmm

(c) 3.5 core 70 sqmm

(d) 3.5 core 35 Sqmm

(e) 3.5 core 25 Sqmm

(f) 2 core 16 Sqmmn

(g) 2 core 10 Sqmm

Material and labour for cutting of metallic road/ hard standing/hard rock/wall up to a size not exceeding 20cm width and not exceeding 60cm in depth for laying of protection pipe for cable including making good the disturbed road/hard standing by providing PCC (1:2:4) type B1, 40 mm grade crushed stone aggregate upto existing surface level or removing the any type of tiles carefully and refixing properly as per existing surface including suitable size of Gl pipe(if necessary) complete all as specified and as directed by Engineer-in-charge. Note: 1. If damaged/broken the any type of tiles while removing, the contractor shall replace the broken tiles with new one. 2. The Quoted rate is included for all materials /T&P/ Machinery used in this item, no material can paid/ measured separately. 3. All the removable tiles/re fixable material shall kept carefully at a safe place for refixing with in this quoted rate 4. GI Pipe shall measured and paid separately under relevant item.

S&F MCCB 3 Pole, 415 V, fixed type, 63 Amps with breaking capacity 16 KA with all accessories complete all as specified and as directed.

S&F MCCB 3 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA with all accessories complete all as specified and as directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA with all accessories complete all as specified and as directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA with all accessories complete all as specified and as directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA complete all as specified and as directed.

S&F Lugs (Thimbles) all as specified and directed by Engr-in-Charge

(a) Suitable for 120 Sqmm XLPE UG Cable

(b) Suitable for 95 Sqmm XLPE UG Cable

(c) Suitable for 70 Sqmm XLPE UG Cable

(d) Suitable for 50 Sqmm XLPE UG Cable

(e) Suitable for 35 Sqmm XLPE UG Cable

(f) Suitable for 25 Sqmm XLPE UG Cable

(g) Suitable for 16 Sqmm XLPE UG Cable

(h) Suitable for 10 Sqmm XLPE UG Cable

S&F Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade complete all as specified and as directed.

S&F Shackle Type, Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, working pressure 1100 volts grade, 75mm height, 90mm dia complete all as specified and as directed.

S&F Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000 volts grade complete all as specified and as directed.

S&F Aluminium conductor, steel reinforced incl taking down old UNSV ACSR conductor complete all as specified and as directed.

M&L Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of painting incl taking down old UNSV cross arms of any size and type complete all as specified and as directed.

Supply & fix GI tubing light grade fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc complete all as speified and directed for following sizes :- Note :- Earth Work shall be measured and paid for separately under respective item of BOQ.

(a) 40 mm dia

(b) 50 mm dia

(c) 80 mm dia

S&F DC spring charge control motor of capactiy 0.1 KW, current rating 1.3 A, 230 V for suitable of any type of totally enclosed of 11 KV VCB control panel all as specified and as directed.

M&L for Switch air break, gang operated triple pole, mechanically operated, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 200 amps 11000 volts (12 Insulator) alongwith fuse system including taking down existing gang operated switch complete all as specified and as directed.

S&F Star Delta starter of size 50 HP oil immersed including taking down the old one from the mounting and connecting, placing , testing and commissioning complete all as specified and as directed.

S&F Star Delta starter of size 75 HP oil immersed including taking down the old one from the mounting and connecting, placing, testing and commissioning complete all as specified and as directed.

S&F Star Delta starter of size 100 HP oil immersed including taking down the old one from the mounting and connecting, placing , testing and commissioning complete all as specified and as directed.

S&F Star Delta starter of size 125 HP oil immersed including taking down the old one from the mounting and connecting, placing , testing and commissioning complete all as specified and as directed.

Cast iron Sluice Valve ISI mark (PN-1.6) confirming to IS 14846-2000, flanged ends drilled having stainless steel/ brass spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets of size 200 mm bore. Complete all as specified and as directed.

All as per above item No. 44 here in before but of size 150 mm bore.

All as per above item No. 44 here in before but of size 100 mm bore.

All as per above item No. 44 here in before but of size 80 mm bore.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth strip 32x6mm (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber, with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm clc in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia Gl pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note :- The rate is inclusive of necessary earth work, RFR and removal etc

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.

(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board

(c) One 3 pin 5 Amp switch socket outlet on same board with accessories

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.

S&F switch piano Flush type, single pole, 16 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 Amp flush type,universsal complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universsal complete all as specified and as directed.

S&F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed.

S&F switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed.

S&F in repairs Modular socket 6A - 2/3 pin combined 2 module,complete all as specified and as directed.

S&F in repairs Modular socket 6A /16A- 2/3 pin combined 2 module, complete all as specified and as directed.

S&F in repairs Modular Bell Push 6 Amp , One module complete all as specified and as directed.

S&F in repairs Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed.

S&F stepped type modular fan regulator, 120 W, 1/2 module Make Anchor or equivalent.

S&F in repairs Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed. Make Anchor or equivalent.

Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with black plate suitable for batten fitting complete all as specified and as directed.

Material and Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4 sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC capping & casing not less than 25 mm wide with all neccessary fitting and including one run single core multistranded copper conductor cable, of size 4.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall/ ceiling complete. Note:- 2 Runs of main cable and one run earth wire with capping & casing will be measured as one RM for payment.

Material and Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 6 sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC capping & casing not less than 25 mm wide with all neccessary fitting and including one run single core multistranded copper conductor cable, of size 6.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall/ ceiling complete. Note:- 2 Runs of main cable and one run earth wire with capping & casing will be measured as one RM for payment.

S&F in repairs Distribution Board, TPN 4 Way, Double door complete all as specified and as directed.

S&F in repairs Distribution Board, SPN 12 Way, Double door complete all as specified and as directed.

S&F in repairs Distribution Board, SPN 8 Way, Single door complete all as specified and as directed.

S&F in repairs Distribution Board, SPN 4 Way, Single door complete all as specified and as directed.

S&F in repairs Distribution Board, SPN 2 Way, Single door complete all as specified and as directed.

S&F in repairs MCB, Single Pole 6-32A Amps 240 Volts B curve, complete all as specified and as directed.

S&F in repairs MCB, SPN 6-32A Amps 240 Volts B curve, complete all as specified and as directed.

S&F in repairs MCB, SPN 40 Amps 240 Volts B curve, complete all as specified and as directed.

S&F in repairs MCB, SPN 63 Amps 240 Volts B curve, complete all as specified and as directed. Make : Havells or equivalent

S&F in repairs MCB, TPN 40 Amps 415 Volts C curve, complete all as specified and as directed.

S&F in repairs MCB, TPN 63 Amps 415 Volts C curve, complete all as specified and as directed.

S&F exhaust fan/brisk air fan of size 250mm sweep, non matallic complete all as specified and as directed.

S&F LED Lamp thread/pin type 10 W

S&F LED Lamp thread/pin type 15 W

S&F LED Lamp thread/pin type 20 W

S&F LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F surface and wall mounted LED fitting 1x20W, Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack incl intergrated electronic driver 230 Volt complete all as specified and as directed.

S&F LED Mirror Light "Eco Smart Linea" 18 Watts made of extruded engineering plastics suitable for surface mounting on a ceiling or wall complete all as specified and as directed.

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire one twin core cable flat or circular of size 6 sqmm all as specified and directed.

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire one twin core cable flat or circular of size 10 sqmm all as specified and directed.

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire one twin core cable flat or circular of size 16 sqmm all as specified and directed.

Taking down & dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, split pins, screws, nuts and spring washers complete including, flexible chord of 24/ 0.20mm with neccessary connector (for blade/ body) as required after rewinding complete all as specified and as directed. Note : Spares used and rewinding shall be measured and paid separately under relevant item.

M&L for rewinding the Ceiling fan of any sweep using super enamelled copper conductor cable of suitable gauge including insulation, varnishing, packing, Changing of fan bearings & painting for fan and fan blades etc complete all as specified and as directed.

Supply and fixing in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan complete all as specified and as directed.

Supply and fixing in repair capacitor 2.5/3 mfd suitable for 250mm to 350mm sweep exhause fan complete all as specified and as directed.

S&F in Repair recess mounted edgepro range of slim fit low profile downlights engineered to deliver superior light output and uniformity utilising the latest edge lit 36W LED (2'x2') Warm/White

S&F in Repair recess mounted edgepro range of slim fit low profile downlights engineered to deliver superior light output and uniformity utilising the latest edge lit 15W LED.

Servicing of Geysers of any capacity by opening of entire geyser and cleaning all the sludges, blockages, dust, etc complete all as specified and as directed.

Supply and fixing in replacement heating element (round/traingular) including rubber gasket & washer etc of capacity 1.5 KW suitable for existing make and shape complete all as specified and as directed.

Supply and fixing in replacement heating element (round/traingular) including rubber gasket & washer etc of capacity 2 KW suitable for existing make and shape complete all as specified and as directed.

Supply and fixing in repair thermostate suitable for 25/50 Ltr Geyser complete all as specified and as directed.

S&F in repairs PVC connecting pipe 18" long with brass adopters for Hot/Cold water and connecting up with complete for 25/35/50 ltrs capacity Geysers including taking down existing unserviceable PVC connecting pipe. Complete all as specified and as directed.

S&F fusible plug melting at 90-100 degrees Centrigrade including taking down existing unserviceable fusible plug Complete all as specified and directed.

S&F high pressure valve with dead weight suitable for 25/50 ltrs capacity Geysers including taking down existing unserviceable high pressure valve Complete all as specified and as directed.

S&F bottom covers (set of two halves) duly painted made out of Aluminium / MS sheet of 18 SWG suitable for 25 / 35 / 50 ltrs capacity Geysers including taking down existing unserviceable bottom covers. Complete all as specified and as directed.

S&F base assembly complete with inlet, outlet, thermostate pipes, drain plug and screws for fixing the element suitable for any make and capacity Geysers complete with nuts, bolts and rubber gasket including taking down existing unserviceable base assembly Complete all as specified and as directed.

M&L for repairs to water heater inner vessel including brazing, welding, testing for a pressure of 3kg/ Sq. cm, re-assembling of any capacity Geysers complete all as specified and as directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fix Plug top 15A 3 pin,240 V complete all as specified and as directed.

Supply and fixing in repair 5 Amp 3 pin plug top with ISI Marking complete all as specified and as directed.

M&L for Insulation tape of size 25/32/40mm of R, Y, B colour. Complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc

Note:- Schedule of credit Rs 94,090.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S Manzoor and Co

M/s FAYAZ AHAMD WANI AND SONS

M/S PARADISE TRADERS AND CO

M/S Sky Engineers

M/S KULBIR SINGH SODHI AND CO

M/S NORTHERN ELECTRICAL WORKS

m/s mohd rafiq lone

M/S IQ ENTERPRISES