Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.1 LAccepted-AOC C 488 SC PLOT NO 10 EKTA NAGAR NEAR ANANT LEWIS PUBLIC SCHOOL BANAR ROAD NANDRI PO SARAN NAGAR JODHPUR 342015 RAJASTHAN | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹43.2 L+₹6.4 L (17.4%)Rejected-Finance MARYADA 111 SHIKARGARH KANHAIYA NAGAR JODHPUR 342001 | JODHPUR | RAJASTHAN | 342001 | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹46.8 L+₹10.0 L (27.2%)Rejected-Finance 338 PRABHAT NAGAR NANDRI BANAR ROAD JODHPUR 342001 JODHPUR | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-Finance Rejected being L3 | |
| 4 | L4₹47.1 L+₹10.3 L (27.9%)Rejected-Finance | L4 | Rejected-Finance Rejected being L4 | |
| 5 | L5₹47.7 L+₹10.9 L (29.5%)Rejected-Finance | L5 | Rejected-Finance Rejected being L5 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
22 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (ARMY) CENTRAL JODHPUR
GE ARMY CENTRAL MULTAN LINES JODHPUR
SPL REPAIR TO COOK HOUSE BLDG 130A AT SUB GROUP AND SEWAGE LINE AT JSI ENCLAVE IN THE AREA OF AGE B R I UNDER GE ARMY CENTRAL JODHPUR
2022_MES_549059_2
GE/J/A OF 2022-23 (9133/E8)
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (ARMY) CENTRAL JODHPUR
₹1 L
Yes
4 Nov 2022
7 Oct 2022
24 Oct 2022
7 Oct 2022
22 Oct 2022
14 Oct 2022
Amount
Note:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Replacement/Renewal" unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are requested to quote their rates accordingly.
Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness ( below or above ground level) of any description and removing rubbish to out side MD land complete all as specified and as directed.
M&L PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation , filling and mass concerete complete all as specified and as directed.
M&L 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) laid in alternative bays as in plinth protection including finishing the surface even & fair without using extra cement & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight, complete all as specified and directed.
Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.
Demolition of brick work/stone masonary built in cement mortar including all quoins, pillars, etc., removal of unserviceable materials, debris, rubbish to outside MD land, complete all as specified and as directed by Engr-in-Charge.
M&L for cutting into old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6, complete all as specified and as directed.
M&L for squared rubble walling, Jodhpur type, regular coursed, well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.
All as per item No 9 here-in-above, but except stone.
Precast cement concrete block masonry using PCC 1:2:4, type B-1 solid blocks, 10 cm thick and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.
Extra over square rubble stone walling, Jodhpur type, regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed.
Dismantling, stone slab, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as directed.
M&L for 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring, incld. finishing the surface even & rough to receive tiling etc., complete all as specified and as directed.
Joint free non skid ceramic coloured tiles (premium quality) of size 6 to 7 mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. Make : Kajaria/ Somany/ Orient as approved by GE.
M&L for glazed colour ceramic tiles (premium quality) of size 350X450X7 mm / 350X250X7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles (Highlighter pattern), over and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed. Make : Kajaria/ Somany/ Orient as approved by GE.
M&L for 20-25 mm thick machine cut kota stone slab, as in flooring, cooking platform & etc. over and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing ,complete all as specified and as directed by Engr-in-Charge.
M&L for 20-25 mm thick machine cut kota stone slab, as in skirting, dado, riser, pillar, steps & etc. over and including 10mm thick cement screed bed in CM 1:4 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing ,complete all as specified and as directed by Engr-in-Charge.
M&L 20-25 mm thick machine cut Kota stone, as in shelves and other places etc., laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing, complete all as specified and as directed.
M&L for 20 mm thick (telephone black shade) granite stone, as in cooking plateform, machine cut, (table rubbed and polished) best quality as per sample, including & over 20 mm thick screeding in CM1:3 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc including removing rubbish to out side MD land complete all as specified and as directed.
M&L Rendering 10mm thick in CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished surface even & smooth, complete all as specified and as directed by Engr-in-Charge.
Rendering 15 mm thick in cement mortar 1:6 on stone masonry surfaces, finished surface even & smooth,with out using extra cement, mixing with WPC as per manufacturer instruction, complete all as specified and as directed.
Racking out joints/ pointing to squared rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed by Engineer-in-charge.
M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.
M&L for preparing new plastered or unplastered surfaces and applying one coat wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper on walls, complete all as specified and as directed. Note:- OBD shall be in one or more colours/ shades all as approved by GE.
Complete removal of existing treatment of any description on walls and and applying two coat wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distempe, complete all as specified and as directed. Note:- OBD shall be in one or more colours/ shades all as approved by GE.
Preparing new plastered or unplastered surfaces and applying three coats of white wash on wall complete all as specified and as directed.
Preparing new plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.
Preparation of old white washed surfaces and applying one coat of white wash on wall surfaces complete all as specified and as directed.
Preparation of old white washed surfaces and applying one coat of white wash on ceiling surfaces complete all as specified and as directed.
M&L for preparation of new plastered or un-plastered surfaces of wall and applying two coats of cement base paint of approved quality & tint, over & including one coat of chalk white, complete all as specified and as directed.
Preparation of old painted surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.
Preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed .
M&L preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.
Taking down shutters of any description area exceeding 1.0 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.
Taking down Shutters of any description and refixing the shutters in the same opening of any description exceeding 1.00 Sq.m and not exceeding 2.00 Sq.m each after easing and adjusting complete all as specified and as directed.
Rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.
M&L for mild steel framed work as in brackets etc for cooler stands etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc complete all as specified & directed .
S&F mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straight portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hip ties for roof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling bolting or riveting etc and similar work confirming to Fe 410-0 or fe 310-0, complete all as specified and as directed.
Dismantling of unservicable steel structure, at various location complete all as specified and as directed.
M&L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on internal surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc, including taking down old U/s steel shutter complete all specified and directed.
S&F 35mm thick factory made second class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass/gauze etc(without sash bar) edges of framing plain chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge in SSR Pt I-1991 section 8 clause 8.24 (b), including stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples & aluminium grill medium grade mess size 50X50mm fixed at outer edge of door incld pink primer, complete all as specified and as directed.
S&F factory made flush shutters 35 mm thick, solid core construction, with block board and plywood face panels, both faces is covered with salmica with lipping/frame to match with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process, complete all mortic lock and handel arremgment, complete all as specified and as directed.
Preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed .
Preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F of factory made solid panel PVC flush door shutter, 30 mm thick (style) consisting of wpc frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.
M&L for solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with MS square tube, complete all as specified and as directed.
Taking down of steel window and ventilators, carefully, complete all as directed by Engr-in-Charge.
S&F factory made box type steel window (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed by Engr-in-Charge. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.
S&F factory made box type steel window (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete without glazing bars, dovetailed or welded, complete all as specified and as directed by Engr-in-Charge. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.
Factory made, box type steel ventilator with glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified and as directed.
Factory made, box type steel ventilator without glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified and as directed.
S&F 200mm long aluminium anodised tower bolt, complete all as specified and as directed by Engr-in-Charge.
S&F 150mm long aluminium anodised handle extruded section, complete all as specified and as directed by Engr-in-Charge.
S&F of aluminium alloy anodised sliding door bolt with hasp and staple bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long, complete all as specified and as directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paidfor separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per TD and the directions of Engineer-in-Charge. Note : (i) Hinges, handles etc shall be measured and paid separately. (ii) Glass pan and rubber beading shall be measured and paid separately.
S&F standard powder coated coloured aluminum anodized Deco grill ‘U’ channel 25x12 mm with and including perforated aluminum wire mesh weight not less than 550gm/Sqm over grill complete all as specified and directed .
M&L for 5 mm thick tinted/frosted glass fixed with channel / snap grid and rubber beading packing in door , windows and ventilator and securing complete all as directed
S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface, complete all as specified and as directed.
S&F Mild steel mortice lock, vertical type with 2 keys, 100mm size, 2 levers, as per sample complete all as specified and as directed.
S&F in replacement Door closer hydraulically regulated, Aluminium (extruded section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg fixed, complete all as specified and as directed.
S&F of stainless steel butt hinges 100mm size, complete all as specified and as directed.
S&F butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type C-11, complete all as specified and as directed.
S&F 100mm size single action door spring hinge, complete all as specified and as directed.
S&F floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring 140mm long, complete all as specified and as directed.
S&F of 4mm thick pinheaded sheet glass panes of size not exc 0.5 Sqm fixed with oil putty, complete all as specified and as directed.
S&F for 3mm thick plain glass ordinary quality & glazing, complete all as specified and as directed.
S&F in replacement GI steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface, complete all as specified and as directed.
M&L for PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in coping/ benching, DPC, pier caps, bed blocks, for hold fast etc., including mixing with WPC and necessary form work, complete all as specified and as directed by Engr-in-Charge. Note:- WPC shall be measured and paid separately.
S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item, complete all as specified and as directed.
S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed by Engr-in-Charge.
S&F in replacement shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms)
S&F in replacement soap dish of PTMT fixed with screws complete all as specified and directed.
S&F in replacement PTMT towel rail 450mm long fiexd to wall with chromium plated brass screws and woodn cleats Min weight 170gms approved make complete all as spcified and directed.
S&F in replacement MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.
S&F in replacement stainless steel sink with drainage board made of 1mm thick sheet, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarfwall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and as directed. Make : Nirali/ Jayna/ Bluestar as approved by GE.
S&F in replacement vitreous china ware wash hand basin, white, flat back of size 550 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 15 mm size 2 nos PVC connection pipe 450 / 600 mm long with PTMT nuts , 32mm bore (low density polythene ) LDPE flexible waste pipe, complete all as specified and as directed. Make:- Cera Cat. No. CALBURT S2020137 or its equivalent model in Hindware / Parryware as approved by GE
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as directed.
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as directed.
S&F in replacement 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors of suitable size complete all as specified and as directed .
S&F in replacement 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors of suitable size complete all as specified and as directed .
S&F in replacement 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, with MS clamps of suitable size complete all as specified and as directed .
S&F in replacement 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, with MS clamps of suitable size complete all as specified and as directed .
S&F 75 mm bore (SWR) PVC bends any radius with access door complete all as specified and as directed.
S&F 110 mm bore (SWR) PVC bends any radius with access door complete all as specified and as directed.
S&F for 110mm bore PVC cowls, diminishing pieces or tapers (larger bore measured), complete all as specified and as directed by Engr-in-Charge.
S& F 75 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and as directed.
S& F 110 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and as directed.
S&F 75mm dia CI floor trap plain grating including jointing with solvent cement 75mm dia, complete all as specified and as directed.
S&F in replacement 25mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia, complete all as specified and as directed. Make : Jaquar/ Kohler/ Cera as approved by GE.
S&F in replacement angular stop valves cast copper alloy chromium plated (ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar cat No. ALI 85053 or its equivalent model in Kohler/ Cera as approved by GE.
S & F in replacement CP two way anglular stop cock with wall flange, screwed down high pressure,screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed. Make: JAQUAR / Kohler/ Cera as approved by GE
S&F in replacement chromium plated, cast copper alloy, fancy type quarter turn 15mm bore bib cock with wall flange, complete all as specified and as directed. Make : Jaquar Cat No. OPP-15037 or equivalent in Kohler/ Cera as approved by GE
S&F 10 ltrs capacity PVC valve less(Super special colors), (ISI Marked) syphonic action type, flushing cistern, low level, with Anti Bacterial Knob, with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and, cistern colour shall be match WC colour, complete all as specified and as directed. Make:- Cera cat. No. B1010102 CIENA PREMIUM or its equivalent model in Parryware / Jhonson as approved by GE
Dismantling existing water tank of capacity exc 250ltrs and not exc 500 ltrs and removing from site, complete all as directed by Engr-in-Charge.
Dismantling existing water tank of capacity exc 500ltrs and not exc 1000 ltrs and removing from site, complete all as directed by Engr-in-Charge.
S&F in replacement 500 ltrs capacity rotational moulded polythene water storage tanks white colour, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, including dismantling of old U/S PVC/RCC water tank & removing to store or outside MD land or credit to contractor, complete all as specified and as directed by Engg.-in-charge. Make:- Sintex / Rotex as approved by GE
S&F in replacement 1000 ltrs capacity rotational moulded polythene water storage tanks white colour, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, including dismantling of old U/S PVC/RCC water tank & removing to store or outside MD land or credit to contractor, complete all as specified and as directed by Engg.-in-charge. Make:- Sintex / Rotex as approved by GE
S&F stainless steel plate rack of size 900mm X 900mm X 250mm of approved pattern made out of stainless steel sheet 18 gauge with round 8mm dia rods complete all as specified and directed. Make : Nirali/ Jayna/ Bluestar as approved by GE.
Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but not exc 1.50 sqm & depth not exc 60cm, complete all as directed.
Providing and fixing polyvinyl chloride (PVC) sheet frame of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, all as per manufracturers specifications, complete all as specified and as directed by Engr-in-Charge.
M&L for 18 mm thick solid PVC sheet UPVC Coated Celuka printed in one of two different colours( with wood grain printed pattern /ivory colour finish) as in kitchen cabinet shutters & cupboard shutter, all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc., complete all as specified and as directed.
S&F Auto hinges, stainless steel, complete assembly complete all as specified and directed.
Extra over solid PVC sheet for fixing 18 mm width & 2-3 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails, complete all as specified and as directed.
S&F '0' degree clip type self closing hinges for cabinets fixed with cadimum coated screws, complete all as specified and as directed.
S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters, complete all as specified and as directed.
All as per item No. 110 here-in-above, but size 75mm.
S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved sample.
S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers.
M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil as directed by Engineer-in-charge
M&L 50mm thick PCC 1:2:4 type B1 using 20mm graded aggregate platform for water tank complete all as specified and as directed
Sand stone slabs, 5 cm thick, Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and as directed.
Supply only integral water proofing compound ISI Marked all as specified.
Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.
-Ditto- All as per Item No. 118 above but 20 mm dia
-Ditto- All as per Item No. 118 above but 15 mm dia
Refixing old GI water tubing of 25 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.
All as per item No. 121.00 here-in-above, but size 20 mm bore
All as per item No. 121.00 here-in-above, but size 15 mm bore
S&F of water GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid n floors, complete all as specified and as directed. (a) 25 mm dia,
-Ditto- All as per Item No. 124 above but 20 mm dia
-Ditto- All as per Item No. 124 above but 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
S&F snap grid frame work of powder coated pre-fabricated GI channel of size 600x600mm suitable for false ceiling with 8mm thick PVC laminated ceiling gypsum board and fixed as per manufacturer instructions including as per sample kept in GE office, Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to perimeter of wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.complete all as specified and as directed.
Demiolition of reinforced cement concrete of staircase, landing, chajjas and similar suspended work of any description and any position not otherwise, complete all as directed.
Use and waste formwork to side & soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including rough finished surfaces complete all as specified and directed.
Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide includingrough finished surfaces complete all as specified and directed.
Use and waste of form work to sides and soffits of lintels, beams, brackets, shelves and similar works for rough finished surfaces of concrete complete all as specified and as directed.
M&L RCC design mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chijja and in shelve etc complete all as specified and directed.
M&L RCC, M-25, design mix (using 20mm graded aggregate) as in beam, cantilevers, bressummers, lintel overone meter span, complete all as specified and as directed by Engr-in-Charge.
S&F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam, slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed by Engr-in-Charge.
S & F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.
S&F mild steel TMT bar 5 dia and over upto and including 10mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc., hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed by Engr-in-Charge.
M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen confirming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) Top layer : 40 mm thick PCC 1:2:4 type B-1 using 12.5mm graded crushed stone aggregate in roof padding for maintain slop on roof finished even and smooth with using extra cement NOTE :- WPC shall be measured and paid separately under respective item.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed .
All as per item No. 139.00 here-in-above, but depth exceeding to 1.50 mtr. but not excedding 3.00 mtr.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard rock complete all as specified and as directed .
Supply & laying jointing and testing 150mm bore reinforced cement concrete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement complete all as specified and directed.
All as per item No. 142.00 here-in-above, but size 200 mm bore
All as per item No. 142.00 here-in-above, but size 250 mm bore
All as per item No. 142.00 here-in-above, but size 300 mm bore
M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested suitable for 150 mm dia pipe, complete all as specified and as directed.
All as per item No. 146.00 here-in-above, but size 200 mm bore
All as per item No. 146.00 here-in-above, but size 250 mm bore
All as per item No. 146.00 here-in-above, but size 300 mm bore
Rendering 15 mm thick in cement mortar 1:4 on stone masonry surfaces, finished surface even & smooth,with out using extra cement, mixing with WPC as per manufacturer instruction, complete all as specified and as directed.
Returning filling excavated soil/rock in including spreading, levelling, watering and well ramming in layers not exc 25cm, complete all as specified and as directed by Engr-in-Charge.
Removing excavated soil exc. 250 m but not exc. 500 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and as directed by Engr-in-Charge.
Removing hard rock exc. 250 m but not exc. 500 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and as directed by Engr-in-Charge.
Supply and Fix cast iron foot steps, n. exc 5 Kg each in manholes, complete all as specified and as directed.
S&F 75mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover, complete all as specified and as directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150 mm bore of pipe complete all as specified and as directed.
All as per item No. 156.00 here-in-above, but suitable for 200 mm bore pipe
S&F 100mm dia spun cast iron (soil waste and vent) pipes in any length with or without ears with cement joints laid in trenches or floor, including cutting hole where required, complete all as directed.
S&F 75mm dia spun cast iron (soil waste and vent) pipes in any length with or without ears with cement joints laid in trenches or floor, including cutting hole where required, complete all as directed.
S&F 110 mm bore PVC [SWR] branch piece, single (single Y) equal or unequal complete all as specified and as directed.
S&F for 75mm bore PVC cowls, diminishing pieces or tapers (larger bore measured), complete all as specified and as directed by Engr-in-Charge.
S&F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 100mm bore, for cast Iron soil / waste / vent pipes complete all as specified and as directed.
100mm bore cast iron sanitary connections—short connections pipe of length upto 300 mm, complete all as specified and as directed.
S&F cast iron single branch pieces with ovall access door, [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches suitable for 100mm bore pipes complete all as specified and as directed.
S&F cast iron double branch pieces with ovall access door, [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches suitable for 100mm bore pipes complete all as specified and as directed.
S&F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 75mm bore, for cast Iron soil / waste / vent pipes complete all as specified and as directed.
S&F cast iron single branch pieces with ovall access door, [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches suitable for 75mm bore pipes complete all as specified and as directed.
S&F cast iron double branch pieces with ovall access door, [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches suitable for 75mm bore pipes complete all as specified and as directed.
M &L for cutting to Bituminious road for laying of RCC hume pipe & making good as per road specification as per direction of Engr-in-Charge.
Cutting and grubbing of bushes grass and tree surrounding sewage line and levelling of ground around the sewage line, finish the surface and removing the waste material to distance exc. 50m and n exc. 250m and clearing the site.
Pumping out water inflow caused by spring or tidal or river seepage, broken water mains or drains and the like with pumping set of 5 HP to 9 HP including POL/power consumption & operator maint etc. All as directed. Note : This item shall be operated only when specifically ordered by Engr-in-charge.
S&F in replacement precast steel fibre reinforced concrete (SFRC) any colour, 75-100mm thick manhole cover with frames (ISI marked) of overall covered area not exceeding 3.00 Sqm with clear opening not less than 0.36 Sqm, any shape (round, square, rectangular etc;) provided with suitable mild steel rims to prevent from chipping of edges and enable clear opening with provision of easy lifting hooks which are duly protected against corrosion laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
Taking down copper/aluminium point wiring surface/ concealed (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc. removing materials from site of work complete or removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc., complete all as directed by Engr-in-Charge.
Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and as directed.
Taking down copper/aluminium sub main wiring surface/ concealed complete, including fixture and fittings removing materials from site of work complete or removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as directed by Engr-in-Charge.
Point wiring using approved colour coding as per IS code, with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in 25mm dia PVC rigid conduit with all accessories complete surface mounted in wall/roof/floor etc, ISI marked and terminated to and including provision of gang terminal boxes with 3mm thick hylam sheet cover on top for fixing switches, sockets / regulators etc., inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light / fan /bell point controlled by one, one way switch complete all as specified and directed .
All as per Serial Item No.182.00 here-in-above but for one 3 pin socket outlet 5/6 Amps on the independent board , complete all as specified and as directed.
All as per Serial Item No.182.00 here-in-above but for one 3 pin socket outlet 5/6 Amps on the same board with other switches complete all as specified and as directed.
All as per item No 08 here-in-above but with using 4 Sq mm FRLSH single core multistanded copper conductor cable and 4 sq mm PVC FRLSH insulated unsheathed stranded copper conductor for common earth wire for 6 pin 15/16 Amp socket outlet on independent board .
S&F switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts, ISI Marked, complete all as specified and as directed.
S&F switch piano, flush type, single pole, one way,15/16 Amps, 230 Volts, ISI Marked, complete all as specified and as directed.
S&F socket outlet, flush type, single pole, 2 in 1, 3 Pin, 5/6 Amps, 230 Volts,ISI Marked, complete all as specified and as directed.
S&F socket outlet, flush type, single pole, 2 in 1, 6 Pin, 6/16 Amps, 230 Volts,ISI Marked, complete all as specified and as directed.
M&L ceiling rose, 3 phase / PVC / Polycarbonate, isolated body, ISI Marked, complete all as specified and as directed.
S&F lamp holder insulated body polycarbonate type with back plate, including 9 W LED Lamp, complete all as specified and as directed by Engr-in-Charge.
S&F Electronic fan regulator, 120W, modular type, 2 module and connecting electrically, ISI Marked, complete all as specified and as directed by Engr-in-Charge.
S&F air curtain 3 feet, size & sahpe approved by GE,
S&F in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, lamp holder, 4 feet long, including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, including taking down old u/s material, complete all as specified and as directed. Make : Bajaj Cat No. BCLSB 20 WH or Equivalent in Philips/ Havells as approved by GE.
S&F connecting, and commissioning of street light fitting 35 watt LED , IP-65 protection, single piece pressure dia cast aluminium alloy housing high impact 4 mm thick heat resistant toughned clear glass cover for lamp and matrix of LEDs in built electronic driver upto 4 KV surge protection device and setting& input power 35 W system lumens 85/W operating voltage 160-260 V contror gear compartment with high voltage, Prewired including 1.20 mtr long 32mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified Make : Philips/ Bajaj/ Havells
Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make : Philips/ Bajaj/ Havells
S&F Air circulator fan 450mm sweep, 230 volts, AC Supply and connected with twin core twisted flexible copper conductor cable from ceiling rose to fitting complete all as specified and as directed.
M&L for cooler stand, flush to wall for desert cooler, fabricated out of MS angle iron 40mm x 40mm x 06mm, 1.2 meter long bend to shape as top size 600mm x 600mm, duly welded with two members to tie vertical support, including painting two coats of synthetic enamelled paint over a coat of red oxide primer including M&L for steel rack bolts/ fastners, 100mm long, 12mm dia - 4 Nos for fixing stand, all as directed.
Supply, install testing & commissionig desert cooler electric driven (single phase) three speed having nominal air flow capacity 5000 CFM per hour, with propeller ISI Marked cooler fan motor copper winding single phase fitted with / having aluminium blade of minimum size 500 mm ,submersible pump, Max power consumption of 325 Watts. Cooler body made out from 20 gauge mild steel galvanized iron sheet & water tank made out of 18 SWG, having capacity 40 Ltr minimum including three louvers with wood wool pad, flexible PVC distribution pipes and 3 way junction all as directed by Engr-in-Charge and of standard make as approved by GE” NOTE : 1. Three speed switch ISI Marked rotary type for propeller fan and one way switch pump with separate control. The switches shall have marking off- Low - medium and high. 2. float valve on water supply connection shall be deemed to be included in unit rate quoted . 3. PVC Connection PIpe including Fastners , Nuts , washers and reducer , Tee , Elbow etc ( GI fittings) for making connection of water supply to Desert coolers
Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Philips /BAJAJ/Havells
Taking down and refixing / Hanging only ceiling fan after servicing (Cleaning, oiling and greasing) and connecting up including provision of cable from ceiling rose or connector to fan including filling cavities with filler, one coat after cleaning all dust etc., complete all as directed.
S&F exhaust fan, heavy duty steel body, AC single phase 450 mm sweep, 1200 RPM complete with louvers including cutting / making holes in wall fixing/grouting of frame & connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan, complete all as specified and as directed by Engg.-in-charge. Make : Havells/ Bajaj/ USHA
S&F Vertical Distribution Board, double Door, suitable for 'A' Frame FP MCCB 100A made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Make : Havells Cat Part No DHDLVSRWGOFO04 or its techno commercially equivalent make in Bajaj / Philips Note : MCCB & MCB shall be measured and paid for separately.
S&F in replacement MCCB, 'A' Frame, thermal adjustable magnectic setting, Ics = 75%, 25 KA, 415V, 100 Amp, 4 Pole with over load and short circuit protection, (ISI marked), as in replacement, complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
S&F MCB SP 240 volts rating from 40 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, as in replacement, including taking down old u/s material complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
S&F MCB SPN 240 volts rating from 63 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, as in replacement, including taking down old u/s material complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
Supply, installation and testing in existing location and position, metal top deep freezer, chest freezer, double door, size 1180mm x 665mm x 830mm, CFC free insulation, sunken handle, electric driven, single phase, having approx storage and nominal cooling capacity 320 ltrs, BEE Star Rating - 3 Star and above rated with 4KVA stablizers copper wound voltage range from 170 V to 280 V, complete all as per specified & directed by Engg.-in-charge. Make :- Bluestar/ Bosch/ Samsung.
S&F in replacement of Prewired distribution board (sheet metal enclosures) SPN 12 way with suitable rated 200 Amps bus bar for Double door DB's of apporved gauge conforming to IS relevant, IP-43 protection, 240 volt, complete all as specified and directed by Engr-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface Make :-Legrand/ ABB / Schneider.
S&F sub main wiring with two runs of 6 sqmm & one run of 6 Sqmm earth wire 1100 volt grade PVC insulated but unsheathed multi stranded copper conductor FRLSH cable, single core cable conforming to IS 694 with valid CML No. & ISI Marked, (Phase-Red, Neutral-Black, Earth-Green) drawn through and including 15mm dia PVC rigid conduit with accessories surface mounted on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.
M&L in repairs for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised iron earth lead wire of size 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion, complete all as specified and as directed by Engr-in-Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.
Supply, laying (in trenches), testing & commissioing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3.5 Core, complete all as specified and as directed by Engr-in-Charge.
Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc.1.50 mtr above the starting point, complete all as specified and as directed.
Supply and spreading clean dry sand ( river sand) in trenches for cushioning to PVC cable and punning to provide required cover to UG cable complete all as specified and directed . Note :- Punned thickness shall be measured for the purpose of payment.
Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 300x1580mm x40 mm, complete all as specified and as directed.
M&L for galvanised steel tubing, medium grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings, of size 40 mm bore, complete all as specified and as directed. Make : Prakash/ Tata/ Jindal
NOTE:- (i)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 46 to 50 of tender document. (ii)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount
M/S KAUTILYA GARG
Bhairav Infra Projects
M/S IK CONSTRUCTION
Bhawna Emporium
M/s Ajay kumar Garge
SUNDER LAL DAVE
Mahesh Dave
JB INFRA
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .