Selection of Agency for Development of Park/ Garden at Plot No. 410, Near Narendra Modi Stadium- Gate No. 3 along with the O&M for Three Years in Sabarmati Ward – West Zone

BILL OF QUANTITIES (B.O.Q.)

BILL OF QUANTITIES (B.O.Q.)

Name of the work: Tender for Selection of Agency for Development of Park/ Garden

at Plot No. 410, Near Narendra Modi Stadium- Gate No. 3 along with the O&M for

Three Years in Sabarmati Ward – West Zone

Name of Contractor: _________________________.

Correspondence Address: ____________________.

Tender Amount: INR 4,02,48,921.84/- including all cost and taxes excluding GST.

Contractor’s Quoted Rate: -

Net Tender Amount: INR ___________________/- including all cost and taxes excluding

Amount In Words: (Rupees__________________________only) including all cost and

taxes excluding GST.

<The quote to be submitted online only>

Seal and Signature of the Bidder:

DYMC (Parks & Garden), Ahmedabad Municipal Corporation

NAME OF PROJECT:- Development of Plot NO 410, Near Narendra Modi stadium Gate No

Sabarmati ward West zone.

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

N Civil works 27959508.00

O Landscaping 1812937

P Irrigation works 867656.46

Q Electrical Works 9608820.38

R Total Cost (N+O+P+Q) 40248921.84

NAME OF PROJECT:- Development of Plot NO 410, Near Narendra Modi stadium Gate No

Sabarmati ward West zone.

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

S.No Description of Items Estimated Value (Rs.) Total Amount In Crores.

A Dismantling work- Site Clearence 112469.95

B Earthwork 430169.80

C BASE COURSES 521111.68

D RCC WORK 6656085.94

E Steel work 6313987.73

F Masonary work 2671139.57

2 Beautification Works - Land Scape- Hard Scape

G Floor finish 2554582.52

H KERBS 93095.60

I DRAINAGE WORK 1117182.14

J MISC ITEMS 5526903.94

K Sanitary and Plumbing 1217522.60

L Signages 408639.00

M Painting Works 142207.41

N Site Survey 194410.13

O (Civil+Hardscape+Survey+O& 27959508.00

P Land Scape- Soft scape 1812937

Q Irrigation works 867656.46

R Electrical & Mechanical Works 5010801.6

Audio System, CCTV & LED

T Solar Works 585688.95

U Total Cost (O+P+Q+R+S+T) 40248921.84

NAME OF PROJECT:- Development of Plot NO 410, Near Narendra Modi stadium Gate No 3 Sabarmati ward West

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

A Dismantling work- Site Clearence

Demolition including stacking of serviceable materilas anddisposal of unserviceable

materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable

2 materilas and disposalofunserviceablematerialswithall leadand lift.(ii) In Cement 161.0 cum 362.25

Dismentlingsteelwork includingdistemperingand stacking the materials with all lead

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Add extra for Disposing off the excavated stuff of above items for lead of (E) 400 to

Conveyance charge of earth, lime murrum building rubbish earth manure or

sludge & execavated rock and rubbish [Lime murrum building rubbish]

b) Lead up to 1.00 Km. 6.8 CUM 256.16

c) Lead up to 1.50 Km. 6.8 CUM 268.12

d) Lead up to 2.00 Km. 6.8 CUM 278.18

e) Lead up to 2.50 Km. 6.8 CUM 287.46

f) Lead up to 3.00 Km. 6.8 CUM 296.43

g) Lead up to 3.50 Km. 6.8 CUM 303.84

h) Lead up to 4.00 Km. 631.9 CUM 312.45

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

7 foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited 226.5 CUM 129.10

layer by ramming and watering.

Suppliying of graded stone aggregate of following sizes (for W.B.M. Road) (1 Hand

broken stone aggregate 25mm to 90mm size.

NAME OF PROJECT:- Development of Plot NO 410, Near Narendra Modi stadium Gate No 3 Sabarmati ward West zone.

SNO SOR ITEM NO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Spreading the stone aggregate for rolling and W.B.M. including filling the interstice store

9 26018B (R&B) quired camber and gradient (excluding spreading of Blindage)(iii)25mm to 50mm size 150.2 CUM 247.28

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- hand

10 5.3.2 broken stone aggregates 40 mmnominal size) and curing complete excluding cost of 150.2 CUM 2976.00

formwork in (A) Foundation and Plinth

Providing and laying in position Ready Mixed M-200 grade concrete for reinforced

cement conctere work , using cement content as per approved Design Mix

manufactured in fully automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per

mix design of specified grade for reinforced cement concrete work including pumping of

R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering

finishing and reinforcement including cost of admixtures in recommended proportions

as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in - charge. Without

Fly Ash (Min cement level as per latest IS 456 shall be maintained)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding

and placing in position complete upto floor two level

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

13 9.1 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ 63.8 sqm 297.68

reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1)

Square Rectangular Polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

14 9.1 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ 861.0 sqm 171.68

reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of

Columns etc. and Mass concrete.

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

15 9.1 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ 631.8 sqm 252.00

reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of

supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

16 9.1 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ 47.4 sqm 192.15

reinforced concrete and plain concrete work in.(H) Sides and soffits of Beams Beam

Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in

17 11.4 position and applying a priming coat of red lead paint. (D) In trussses and trussed 124.3 q 8386.88

purlins, upto 25 M. span and 15 M. ovarall height.

NAME OF PROJECT:- Development of Plot NO 410, Near Narendra Modi stadium Gate No 3 Sabarmati ward West

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed with G.I. J or L

18 Hooks, Bolts and nuts glavanised iron J or L Hooks Bolts and nuts 8mm dia G.I. Limpet 81.6 sqm 1042.78

and bitumen washers complete.

Supply & Installation of MS CNC Laser Cut Panel of below mention thickness, Aesthetic

fixture made of MS, as per design & drawing given by architect. Item include cost of ms

sheet, cutting & installation on site. All work to be completed as per instruction of Site

Providing and fixing post and pipe railing as per detailed drawing including 3 coats of

painting to steel works complete

Providing and fixing S.S. ERW P hollow section of various thickness and sizes

in square, rectanular and round shape from 25mm to 450mm section including frame

of grade 304 pipes with braces of S.S. grade 304 and rectangular section including

21 cutting, organ welding, grading, making circustances polishing, buffing etc. complete 4008.0 KG 308.30

with necessary holes, nuts & bolts, caps & anchor plates of S.S. grade 304 ASTM as per

drawing & instructionsof the Engineer-in-charge excluding the cost of RCC/CC and

Providing and supplying aluminium extruded tubular and other aluminium

sections as per the architectural drawings and approved shop drawings , the

aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super

durable powder coating of 60-80 microns conforming to AAMA 2604 of required

22 colour and shade as approved by the Engineer-in-Charge. ( The item includes cost 972.00 Kg 380.90

of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded

aluminium frame work. Nothing extra shall be paid on this account). The weight

of aluminium extruded section shall be taken for purpose

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50

mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required

complete as per the direction of Engineer-in-charge. 16.71.2 Made of G.I. wire of dia.

mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade

F Masonary work

Brick work using common burnt clay building bricks having crushing strength not less

24 than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine 361.8 cum 4345.02

sand) (A) Modular

25 Extra for brick work in superstructure above plinth level upto floor two level (A) Modular 92.4 CUM 262.35

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior

26 plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1- 867.9 sqm 127.58

White Stone Bela mesonry block in course in superstructure with stone of approved

27 quality in Lime Mortar 1:1.5 (1-Lime putty : 1.5- finesand) including packing the joints 224.0 CUM 4303.47

Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36'' in flooring treads of steps

28 and landing laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3-coarse sand 336.0 SQM 1469.91

) finishing with flush pointing in white cement.

Providing and laying Ceramic tiles 6mmthick in flooring treads of steps and landing laid

29 on a bed of 12mm thick cement mortar 1:3 (1-cement : 3 coarse sand)finishing with 322.8 SQM 960.47

flush pointing in white cement.

NAME OF PROJECT:- Development of Plot NO 410, Near Narendra Modi stadium Gate No 3 Sabarmati ward West

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base

30 of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed 291.3 sqm 1085.48

with grey cement slurry including rubbing and polishing etc. complete. (B) 30 mm thick

31 Extra labour for Chiselling in approved patterns and texts 3.0 Day 970.00

Providing and laying gang saw cut 30 mm thick, mirror polished / shot blasted pre

moulded and pre polished machine cut granite stone of required size and shape of

approved shade, colour and texture in footpath, flooring in road side plazas and similar

32 locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) 52.5 Sqmt 5089.82

including grouting the joints with white cement mixed with matching pigment, epoxy

touch ups etc. complete as per direction of Engineer-in-Charge. 16.87.1 With granite

stone of colour black, cherry/ruby red of area less than 0.50 sqm.

Providing and fixing 10x10x7.50 cm stone block hand cut and chisel dressed on

top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement

: 4 coarse sand) with joints 10mm wide filled with same mortar including ruled

pointing etc. complete as per direction of engineer-in-charge.

Providing and laying flamed/ lapato finish Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and

pointing with white cement slurry admixed with pigment of matching shade including

rubbing, curing and polishing etc. all complete as specified and as directed by the

Engineer-in-Charge : Flamed / lapoto/shot blasted finish granite stone slab Jet Black,

Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in

footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,

thickness & size/ shape, made table vibratory method using PU mould, laid in required

colour & pattern over 20mm thick mortar, compacting and proper embedding/laying of

inter locking paver blocks into the sand bedding layer through vibratory compaction by

using plate vibrator, filling the joints with sand and cutting of paver blocks as per

required size and pattern, finishing and sweeping extra sand. complete all as per

direction of Engineer-in-Charge

35.1 60MM THICK PAVER 100.0 sqms 841.57

Providing and fixing acrylic plastic sheet panels of approved quality in required

thickness plain clear or any colour or obscured linings in lieu of glass pans to

doors/windows including providing and fixing clips, putty etc. complete. (b) 3.00 mm

Supplying, filling, spreading & leveling gravels/round pigmented pebbles of size range

37 mm to 50 mm, in the recharge pit, over the existing layer of boulders, in required 7.5 Cums 546.33

thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supply providing and fixing of 50mm thick EPDM flooring of approved colour and

pattern complete as per the drwaings and the directions of engineer in charge

Supplying & laying of bi-axial extruded high modulus polypropylene geogrid coforming

to MORTH SPECIFICATION for base/sub-base reinforcement having minimum tensile

39 strength 15kN/m in the longitudinal and transverse direction, with 5kN/m and 7kN/m 70.0 sqm 249.90

tensile strength at 2% and 5% strain respectively in the longitudinal and transverse

direction, junction efficiency not less than 95% and with 38mm X 38mm mesh opening.

NAME OF PROJECT:- Development of Plot NO 410, Near Narendra Modi stadium Gate No 3 Sabarmati ward West

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Filling in foundation and plinth with murrum or selectedsoil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of M250 grade concret as per approved

design and including excavation for fixing in proper line and level,filling the joint with

C:M 1:3 (1cement:3fine sand) etc complete.

I DRAINAGE WORK

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt

ends prepared for collar joints

including testing of joints complete.(B) 150mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt

ends prepared for collar joints

including testing of joints complete.(B) 300mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt

ends prepared for collar joints

including testing of joints complete.(B) 450mm

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including

500mm x 450mm C.I. horizontal grating wih frame complete.

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

46 (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20.0 EACH 7109.35

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions

600mm x 850 mm and 450mm deep for pipe lines with three or more inlets.

Supply Providing and fixing corten steel sheets in place complete as per the drawings

and the directions of engineer in charge

Providing erecting and fixing double coated ISI-FRP water tank of required capacity

each with all necessary fittings and connection etc. complete on terrace

Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x

19mm for stiles and 15mm x 15 mm for top and bottom rails. M.S. frame shall have a

coat of steel primers of approved make and manufacture, M.S. frame shall be covered

with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x 50 mm forming stiles, and

5mm thick 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side,

and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail and

bottom rail, Panelling of 5 stiles and rails with 30mm wide x 5mm thick PVC sheet

beading on eighter side, and joined together with solvent cement adhesive,. An

additional 5mm thick PVC strip of 20mm width is to be stculk on the interior side of the

‘c’ channel using PVC solvent cement adhesive etc. complete as per direction of

Engineer in charge, manufacture’s specification and drawing.

NAME OF PROJECT:- Development of Plot NO 410, Near Narendra Modi stadium Gate No 3 Sabarmati ward West

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of

size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x

18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for window.

Providing wood work in Trusses, Purling, Rafter, Post,Post Plates, wall plates and the

like wrought framed, hoisted and fixed in position

Providing and fixing SS DOUBLE POLE 14X24 INCH GRADE 202, WEIGHT 13.000 KG

APPROX. CAPACITY 40+40 LTR OPEN TYPE SHEET THICKNESS 0.5 mm APPROX.

Supply providing and fixing of IPE Wood flooring made up of teak wood, complete work

53 in cluding T&P and materials complete work as per the drawings and the directions of 25.0 SQM 6310.30

engineer in charge.

Supply & Installation of 5 mm clear toughend glass + 1.52 clear PVB layer + 5 mm clear

toughend glass s per design & drawing given by architect.

Providing fixing in place WPC flooring made up of teak wood, complete work in

55 cluding T&P and materials complete work as per the drawings and the directions of 145.00 Sqms 2925.50

engineer in charge.

Supply Providing and erecting of standard quality GFRC (Glass Fiber Reinforced

Concrete) pannels in walls, in all floors using suitable crane as per instructions of

Engineer in charge, as per cutting drawings and structural drawings in perfect line and

plumb above RCC Plinth beam / GFRC pannel below and provide necessary lateral /

56 slanting support to keep wall panner in safe position and tieng reinforcement as per 112.0 Sqm 1813.75

structural drawings and applying a coat of water reppelent coating Zycosil / equivalent

product (1 part compound and 1 parts water). Rate include provision of linters, beams,

sunshades, starircase beams lofts, plumbing work, electrical conduits and any other

structural insertion etc. as per the drawings and direction of engineer in charge.

Supply Providing & Installation of Frp Sheets of required texture and shape as per the

57 drawings including all the necessary tools, clamps, accessiories etc complete work per 360.0 Sqms 923.50

design & drawing given by architect & directtions of engineer in charge

K Sanitary and Plumbing

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or

S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine

sand) (Seal and cover to be measured and paid for separately)(A) vitreous China

Pattern :(i) in white colour

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm

59 (Earthwork, bed concrete, foot reste and trap to be measured and 6.0 EACH 926.10

paid for separately) (A) Vitreous China.(I) Long pattern = White colour

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild

brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size

brass ball valve with polythene float, C.P brass handle unions and couplings for

60 connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled 12.0 each 2321.21

flush bend including cutting holes in walls and making good the same connecting the

flush bend with cistern and closet (overflow pipe to be measured and paid for

separately)(A) Vitreous China (I) In white colour

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white

62 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 6.0 each 67.24

NAME OF PROJECT:- Development of Plot NO 410, Near Narendra Modi stadium Gate No 3 Sabarmati ward West

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted

63 on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass 6.0 each 825.48

screws and washers.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to

wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

65 Providing and fixing toilet paper holder.(A) C.P. Brass 12.0 each 414.53

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap

polished bright. (i) 15mm dia.

Providing and fixing Urinal of approved quality including connection with trap and with

67 integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 12.0 each 1535.63

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali

69 of the following nominal diameter of self cleansing design with C.I scread down or 6.0 each 565.43

hinged grating including the cost of cutting and making good the walls.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

70 on wall using of PVC clamp of the size 110 mm 480.0 rmt 826.88

diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing layingand jointing intrue lineandlevel 15mmdia.U.P.V.C.Pipe(SCH-40)

forcoldwater including fittings as approved by Engineer In Charge. Pipe shall be fixed on

71 the wall with the help of clamp at every two metre C/C or shall be concealedas directed 540.0 rmt 71.93

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing layingand jointing intrue lineandlevel 25mmdia.U.P.V.C.Pipe(SCH-40)

forcoldwater including fittings as approved by Engineer In Charge. Pipe shall be fixed on

72 the wall with the help of clamp at every two metre C/C or shall be concealedas directed 360.0 rmt 90.93

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing layingand jointing intrue lineandlevel 40mmdia.U.P.V.C.Pipe(SCH-40)

forcoldwater including fittings as approved by Engineer In Charge. Pipe shall be fixed on

73 the wall with the help of clamp at every two metre C/C or shall be concealedas directed 360.0 rmt 146.65

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing layingand jointing intrue lineandlevel 50mmdia.U.P.V.C.Pipe(SCH-40)

forcoldwater including fittings as approved by Engineer In Charge. Pipe shall be fixed on

74 the wall with the help of clamp at every two metre C/C or shall be concealedas directed 240.0 rmt 193.73

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

NAME OF PROJECT:- Development of Plot NO 410, Near Narendra Modi stadium Gate No 3 Sabarmati ward West

SNO DESCRIPTION QUANTITY UNITS RATE AMOUNT

Providing, laying and jointing in true line and level 160diametreU.P.V.C (Type B)

conforming to IS 13592-1992with one end plain and other end socketed with

rubberring, & fittings conforming to ISI 14735-1999 of approvedmake for drainage

systempipe line, pipe shall be jointed with each other with rubber lubricant ,pipe shall

75 be fixed on wall using of PVC clamp of the size 160mm diametre x 210mm length x 600.0 Rmt 822.99

196mm heigh at every 2000mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointedwith adhesive solvent cement including cost of all

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water

76 tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) 10.00 Mtrs 1234.57

Square mouth traps.(B) 150mm x 100mm size P or R type

Providing and fixing S.S. Plates for signages of various thickness and sizes in

square, rectanular and round shape, section including frame of grade 304 with braces

of S.S. grade 304 and rectangular section including cutting, organ welding, grading,

making circustances polishing, etching letters buffing etc. complete with necessary

holes, nuts & bolts, caps & anchor plates of S.S. grade 304 ASTM as per drawing &

instructions of the Engineer-in-charge excluding the cost of RCC/CC and earth work.

Supply , Providing, Fixing of signages made of wodden planks with etching of words as

78 per drwaings and complete fixings usings nails, adhesive etc as per the directions of 252 Sqms 1530.00

engineer in charge

M Painting works

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt, dust

and other foreign matter.

White washing with lime on wall surface (two coats) to give an even shade

80 including thoroughly booming the surface to remove all dirt, dust; 413.0 sqm 12.29

mortar drops and other foreign matter.

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecoratedwall surface to give aneven shade including

throughly brushing the surface free from mortar droppings and other

foreignmatter and sand papered smooth.

Paintingtwocoats(excludingprimingcoat)onnew wood andwoodbased surfacewith

readymixed paint, brushing, oil, gloss, semi gloss togiveand evenshade

includingcleaning ofalldust,dirtand other foreign matter sand papering and stopping.

Contour surveywork for prepaing contourmaps by taking cross-section at every

30M. intervals including all, labour materials and instruments.

Surveying for site works including ranging, chaining, pegging leveling and

compass surveying including all labour materials and instruments etc,complete

Project Name : PLOT 410, NEAR MODI STADIUM

Location :AHMEDABAD

ESTIMATION FOR LANDSCAPE AUTOMATIC IRRIGATION SYSTEM

I Manual Irrigation Works

Supply & Installation

S.No Description Units Qty Amount

Pipes Work: Supply, laying & commissioning in position PVC pipe conforming to IS:4985:2000 and suitable for

the respective working pressures without all fittings and accessories e.g. couplings, tees, bends, reducers, screwed

adapters, flanged tail pieces etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In

1.01 PVC pipe 63mm-10 kg/cm² - Mainline Rm 42.00 232.00

1.02 PVC pipe 50mm-6 kg/cm² Rm 78.00 104.50

1.03 PVC pipe 40mm-6 kg/cm² Rm 186.00 92.50

1.04 PVC pipe 25mm-10 kg/cm² Rm 6.00 61.25

1.05 PVC pipe 20mm-10 kg/cm² Rm 6.00 39.50

1.06 PVC fittings LS

1.07 Earth work excavation and refilling 300x450mm Rm 306.00 110.00

2.00 DRIP & ACCESSORIES

Supply, Fixing & Commissioning of flexible,kink resistant 16mm subsurface inline tubing with copper shield

technology (copper chip inserted dripper) protects the root intrusion with pressure compensating, self

flushing emitter, brown in colour, UV damage and algae growth with flow rate of 2.3/3.5 lph pressure rating

2.01 0.58 to 4.14 bar, Dripper Spacing at 30 cm / 45 cm Spacing including all brown colour 17mm barb fittings

etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 1.5" Large Capacity Y Type Disc / Screen Filters for submain filteration Have

High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 88 gpm (15m³/hr), Maximum Pressure

116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of

2.02 Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 1" Large Capacity Y Type Disc / Screen Filters for submain filteration Have

High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 26 gpm (6m³/hr), Maximum Pressure

psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of

2.03 Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 40mm dia self-closing flushing valves that are installed at the end of the

irrigation line for effecting flushing of the line at the beginning of every irrigation cycle, thus avoiding the

clogging of the emitters /sprinklers through removal of particles, sediments and other impurities from the water.

2.04 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 9 - Gauge Galvanized Steel Rod Comes Sharp tips provide easy insertion into

all soil types, Staple Distribution Tubing , XF Drip Line or XBS Tubing to Finished Grade. Notched Sides.

Corrosion -Resistant of TIE DOWN STAKE etc., complete, as per the instructions of Architect/Landscape

2.05 Architect/Engineer In Charge.

Supply,Fixing & commissioning of 16 mm Brown Ratchet clamps for drip lines to secure drip lines . 17 mm

Ratchet Clamps etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

3.00 SPRINKLERS & ACCESSORIES

Supply,Fixing & commissioning of Pop up spray head1804 SAM PRS Series Spray bodies, with Rotary nozzle

having mutilple stream MPR sprayhaving Co-moulded wiper seal is molded into the cap and features an encased

plastic 'cage' to provide unmatched resitence to grit, nozzle having capable of covering 2.4m -7.3m at 1.4 -

3.8 Bars pressure, True flushing mechanism,Thick streams and large water droplet & Low precipitation rate

and the enviroment. Additionally, the pressure-activated, multi-function seal design assures a positive seal

3.01 without excess'flow-by'which enables more heads to be installed on the same valve, Two-piece ratchet

mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of time-

proven UV_resitant plastic. Pop spray body shall with stand upto 4.8 bar. Built-in Seal-A-Matic™ (SAM) check

valve. Traps water in lateral pipes in elevation changes of up to 14 feet (4.2 m). PRS Maintains constant

outlet pressure at 30 psi or 45 psi at varying inlet pressures.etc., complete, as per the instructions of

Architect/Landscape Architect/Engineer In Charge. 1804 SAM PRS R1724

Supply,Fixing & commissioning of 1/2" Pop up Connecting Swing joint Assembly , 12" Length . The tubing

shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a

3.02 surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant

thermo plastic etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge..SA

Supply,Fixing & commissioning of Imported HDPE service saddle of varying size (40mm,50mm & 63mm dia)

with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer

3.03 In Charge.

4.00 VALVES & ACCESSORIES

Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double

water tight joint,direct injection stem, Stem O-Ring, non mechanical ,ball Seals with backing seals and a base

4.01 which permits maximum penetration into the valve of size 50mm. with pressure rating PN 10 etc., complete, as

per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double

water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base

4.02 which permits maximum penetration into the valve of size 40mm. with pressure rating PN 10 etc., complete, as

per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of a double acting air and vaccum release 1/2 " Air release valve . The Air

release valve shall be capable of both releasing and admitting air from and into the line. The working pressure

shall be 5 bar. Only for Drip Irrigation etc., complete, as per the instructions of Architect/Landscape

Architect/Engineer In Charge. Nos 2.00 750.00

Supply,Fixing & commissioning of a double acting air and vaccum release 2 " Air release valve . The Air

release valve shall be capable of both releasing and admitting air from and into the line. The working pressure

shall be 10 KSC etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In

Charge. Nos 1.00 2,060.00

Supply,Fixing & commissioning of 6"Round box with greenlid with features Snap-in overlapping lid, Skid-

resistant lid texture,, Body built with three ridges for additional support to sidewallst & Having Dimensions @ Top

4.05 Opening :6 1/8" Dia & Bottom Opening 8 5/8" Dia etc., complete, as per the instructions of Architect/Landscape

Architect/Engineer In Charge.

Supply,Fixing & commissioning of 10" Round Valve Box with greenlid with features of Overlapping lid with

bolt hole and twist lock, Skid-resistant lid texture, Body built with double ridges for additional sidewall support &

4.06 Having Dimensions @ Top Opening 10" Dia & Bottom Opening 12 13/16" Dia etc., complete, as per the

instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 12" Rectangular Standard Valve Box features, Drop-in lockable lid, Skid-

resistant lid texture, Double ledge lid support, Ridge adds additional support to sidewalls & having Dimensions

4.07 @ Top Opening: 15" L x 9 ½" W Bottom Opening: 18" L x 12 ½" W x 10" H etc., complete, as per the instructions

of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 18'' Jumbo Rectangular Standard Valve Box with greenlid and corrugated

structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening: 18.7" L x

4.08 12.2" W x 12.1" H & bottom opening :24.0" L x 17.5" W etc., complete, as per the instructions of

Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 3/4th inch Quick coupling valve made up of solid brass with locking cover

corrosion resistant and stainless steel spring etc., complete, as per the instructions of Architect/Landscape

Architect/Engineer In Charge.

Supply,Fixing & commissioning of 3/4th inch Key threads into top of QCV to provide water access etc.,

complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 3/4th inch Hose Swivel Made up of Solid Brass Swivels up to 360 degrees

4.11 to allows hose to be pulled in any direction & Also to prevent Hose Damage etc., complete, as per the

instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of Imported Steel reinforced HDPE service saddle of varying size (75mm to

110mm dia) with pressure rating of PN 16 etc., complete, as per the instructions of Architect/Landscape

Architect/Engineer In Charge.

5.00 FILTRATION UNIT

Supply,Fixing & commissioning of 2" Disc Filter with capacity 30m3/Hr having an suitable inlet connections

to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element

and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working pressure

5.01 of 10 Bars etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of Pressure Gauge 2" dial With glycerine filled complete, as per the

instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of uPVC ASTM SCH 40/80 Suction pipe, delivery pipe, bypass manifold pipe

for filter & other fittings for pump room work ( 8-12m legnth of the pipe in the pump room)., complete, as

5.03 per the instructions of Architect/Landscape Architect/Engineer In Charge.

6.00 PUMPING UNIT

Supply,Fixing & commissioning of Monobloc pumpset of having discharge and head of design flow , UPVC

sch 40 - suction & delivery manifold , Y Strainer and mounted on a baseframe with proper supports etc.,

complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

6.01 Duty of Pump : 3.00 LPS

Pressure Head Range = 40 - 45 Mtr

No. of Pumps : 1 Working + 0 Standby Nos 1.00 69,000.00

Supply,Fixing & commissioning of suitable control panel (DOL)for pumpset with inbuilt irrigation controller

pump start relay & having the Key features , Manual Mode : Push button On / Off Control ,rugged standard

mm thickness dust & vermin proof enclosure , high voltage proetction, over load & dry run protetcion fuse

6.02 protectionfor controller to pump enable signal , 8 PIN control relay instead of slim relay , terminal with clamp &

sufficient access space , wall mounting clamp provision, digital pump control with external CT , siemens & switch

gears, quality proven products with long life assurance., etc., complete, as per the instructions of

Architect/Landscape Architect/Engineer In Charge.

Supply ,Fixing & Commissioning of Control Cable for Pump Set - 3 core X 4 / 6 Sq.mm Copper cable based on

the pump capacity

Supply,Fixing & commissioning of 2'' control Valve, Butterfly Valve with VAN Stone flange & Tail Piece in

mainline for bypass and flow diversion of approved quality with pressure rating of PN 10 etc., complete, as per

6.04 the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 2'' Non Return Valve to prevent back flow have flap type or spring type with

pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In

Supply,Fixing & commissioning of Pressure release valve 2" with pressure setting from 0 to 7 Bar etc.,

complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of Ø50-2" Watermeter - ISO PN 10 - GG 25 etc., complete, as per the

instructions of Architect/Landscape Architect/Engineer In Charge.

7.00 Automation Equipments

Supply,Fixing & commissioning of 14/1 Awg cable with high molecular weight polyethelene and applications

upto 600volts , temperature upto -55 to+ 60 deg centigrade ,soft drawn bare copper meeting ASTM B3, tensile

strenth 1400PSI for two way communication betwee nsolenoid valvel and decoders complete including suitable

conduit pipe etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

RAINBIRD / PAIGE OR XERITECH

Supply,Fixing & Commissioning of PVC pipe 32mm-10 kg/cm² as a conduit pipe -including fittings and

Supply,Fixing & commissioning of ESP LXME Modular Controller UV resistant basic 8 station and expandable

upto 48stations,wall mount case,with LCD display ,non volatile memory for 100years,10KV surge protectionwith

removable front panel and programmable under battery in office,and flow watch options to shutdown system if

any damage or excess flow or dry run shutdown,cycle+soak,raindelay,station delay ,alarm light ,electronic

diagnostic circuit breaker ,program summary and review, Station Priorities, wiring test,,4programm and 8start

time per program with adjustable delay between stations,6 languages,slow closing valve, removable battery,and

sensor terminals, Power Management and Flow Management ESPseries Flow Problem Shut Down- yes, Reset User

Definable Options - No Auto Reenable or Reenable with adjustable timer from 1 minute to 24 hours ,One

Number of Flow Sensors optional with FSM Flow Smart Module,PIN Code Protection with IQ Advanced

Programming Featurte Pack Software,Flow Settling Time can Adjustable from 3 to 10 minutes, High Flow Reaction

Set Point Adjustable in 1% increments from 105% to 200%,Low Flow Reaction Set Point Adjustable in 1%

increments from 1% to 95% etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In

Charge. With ESP-LXME ControlD ESP LXMSM8/ESP LXMSM12 Module for adding the stations

Supply,Fixing & commissioning of 1" Solenoid globe angle inlet Valves with fabric reinforced Nitrile diaphram

Material and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating

upto 10.4 KSC and maximum flow of 40GPM ,max water temp. upto 42degree centigrade, with 24AC

solenoid,current rating 0.41A @50Hz,coil resistance 30ohm with provision to attach PRS-Dial PGA Pressure

Regulation Optional PRS-D etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In

Supply,Fixing & commissioning of 1.5" Solenoid globe angle inlet Valves with fabric reinforced Nitrile

diaphram Material and rugged PVC construction ,compatible and slow closing to prevent water

hammer,pressure rating upto 10.4 KSC and maximum flow of 100GPM ,max water temp. upto 42degree

centigrade, with 24AC solenoid,current rating 0.41A @50Hz,coil resistance 30ohm with provision to attach PRS-

7.05 Dial PGA Pressure Regulation Optional PRS-D etc., complete, as per the instructions of Architect/Landscape

Architect/Engineer In Charge.

Supply,Fixing & commissioning of PRS-DIAL to Maintain constant outlet pressure between 1.04 to6.9 KSC etc.,

7.06 complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of direct bury -on wire connector with strain relief ,UL486 D certified ,with

waterproof silicon sealant ,fits wire from 22ga to6 ga as per specifications etc., complete, as per the instructions

of Architect/Landscape Architect/Engineer In Charge. DBRY

Supply,Fixing & commissioning of automatic rain shut off device ,latching hinge with multiple rainfall settings

5mm to 20mm UL CUL listed and CE approved etc., complete, as per the instructions of Architect/Landscape

7.08 Architect/Engineer In Charge. RSD BEX

Supply,Fixing & commissioning of Suitable Pump relay 24 AC PLA relay ,Voltage stabilizer to protect the

controller complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Carrying operation and maintanence work including necesaary repairs, cleaning and and replacement of

dameged items / materials for 5 years under DLP as per the directions of engineer in charge (for garden and

commercial area).

Months 60.00 683.00

Submission of Shop drawing, As built drawing, Handing over documents, Training for maintenance to

team after commissioning of the system and including Supervision, Transportation charges

Sub Total Automation Irrigation System

Total Manual Irrigation System + Automation Irrigation System

GST - 18% SAC CODE : 998740

Grand Total - Manual Irrigation System + Automation Irrigation System

Grand Total - Manual Irrigation System + Automation Irrigation System

NAME OF PROJECT:- Development of Plot NO 410, Near Narendra Modi stadium Gate No 3 Sabarmati

ward West zone.

Horticulture work

DESCRIPTION UNIT QTY RATE AMOUNT

A SITE PREPARATION

Trenching in ordinary soil up to a depth of 60 cm including

removal and stacking of serviceable materials and then

disposing of surplus soil, by spreading and neatly leveling

1 within a lead of 50 m and making up the trenched area to Cum 282.02 78.10

proper levels by filling with earth or earth mixed with sludge

or / and manure before and after flooding trench with water

(excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty

2 and carriage upto 5 km complete (earth measured in stacks Cum 184.00 515.60

will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and

3 carriage upto 5 km complete (sludge measured in stacks will Cum 50.00 294.00

be reduced by 8% for payment).

4 Rough dressing the trenched ground including breaking clods. Sqm. 479.00 1.50

5 Fine dressing of the ground. Sqm. 479.00 3.70

Spreading of sludge, dump manure and/or good earth in

required thickness as per direction of officer-in-charge (cost of

sludge, dump manure and/ or good earth to be paid

Mixing earth and sludge or manure in the required proportion

7 specified or Cum 234.00 36.55

directed by the Officer-in-charge

Providing & laying Selection no. 1 grass turf with earth 50mm

to 60mm thickness of existing ground prepared with proper

level and ramming with required tools wooden and than

8 rolling the surface with light roller make the surface smoothen Sqm. 315.00 87.50

and light watering the same and maintenance for 30 days or

more till the grass establish properly, as per direction of the

officer in charge

Preparation of beds for hedging and shrubbery by excavating

60 cm deep and trenching the excavated base to a further

depth of 30 cm, refilling the excavated earth after breaking

clods and mixing with sludge or manure in the ratio of 8:1 (8

parts of stacked volume of earth after reduction by 20%: one

9 part of stacked volume of sludge or manure after reduction by Cum 189.00 222.85

8%), flooding with water, filling with earth if necessary,

watering and finally fine dressing, leveling etc. including

stacking and disposal of materials declared unserviceable and

surplus earth by spreading and leveling as directed, within a

lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure

DESCRIPTION UNIT QTY RATE AMOUNT

Digging holes in ordinary soil and refilling the same with the

excavated earth mixed with manure or sludge in the ratio of

2:1 by volume (2 parts of stacked volume of earth after

reduction by 20% : 1 part of stacked volume of manure after

reduction by 8%) flooding with water, dressing including

removal of rubbish and surplus earth, if any, with all leads and

lifts (cost of manure, sludge or extra good earth if needed to be

paid for separately) :

Holes 90 cm dia, and 90 cm deep Each 61.00 143.10

Holes 60 cm dia, and 60 cm deep Each 1735.00 43.75

Holes 45 cm dia, and 45 cm deep. Each 2000.00 18.70

Plantation of Trees, Shrubs, and Hedge at site i/c watering and

11 removal of unsaverieable material’s as per direction of officer

in charge (excluding cost of plant & water)

Tree plant Each 61.00 7.30

Shrub plant Each 1735.00 3.65

Ground cover Each 2000.00 2.45

Supply and stacking Avenue plants or equivalent of height

210cm to 240cm in big poly bags of size 25 cm as per

direction of the office-in-charge

Tall Decidious tree

1 P/L of Bombax Ceiba Nos 2.00 70.00

2 P/L of Choresia Speciosa Nos 2.00 80.00

Medium Evergreen Trees

Providing and stacking of Cassia Fistula of height 165-180

3 cm. with 3-4 branches and thick stem in big size HDPE bags nos 2.00 65.00

as per direction of the officer-in-charge.

4 Providing and stacking of Largerstroemia Speciosa nos 2.00 40.00

Large Evergreen Trees

5 Providing and stacking Terminalia arjuna nos 3.00 60.00

6 Providing and stacking of cassia siamea nos 2.00 65.00

7 Providing and stacking of Spathodea nos 2.00 75.00

8 Providing and stacking of Alstonia scholaris nos 2.00 65.00

9 Providing and stacking of Mangifera Indica nos 2.00 55.00

Providing and stacking of Azadirachta Indica (Neem ) of

10 height 120-150 cm. with 3-4 branches and thick stem in big nos 2.00 65.00

size HDPE bags as per direction of the officer-in-charge.

11 Providing and stacking of pulmeria Rubra nos 4.00 400.00

Providing and stacking of Cochlospermum Religiosum of

12 height 150-165 cm. in big polybags of size 25 cm as per nos 4.00 60.00

direction of the officer-in-charge.

Providing and stacking of Delonix regia flos-reginae of height

13 150-165 cm. in big poly bag of size 25 cm as per direction of nos 4.00 60.00

the officer-in-charge.

14 Providing and stacking of Bauhinia blakeana nos 4.00 80.00

15 Providing and stacking of terminalia mantaly nos 3.00 60.00

16 Providing and stacking of callistemon Viminalis Bottle brush nos 2.00 973.75

17 Providing and stacking of Royal Palm nos 4.00 90.00

18 Providing and stacking of Date palm nos 4.00 650.00

DESCRIPTION UNIT QTY RATE AMOUNT

Fragrant and nectar bearing trees -

19 Providing and stacking of Millingtonia hortensis nos 2.00 70.00

20 Providing and stacking of Sita Ashok - Saraca indica nos 2.00 80.00

21 Providing and stacking of Szyzigium Cumni - Jamun nos 5.00 75.00

22 Providing and stacking of Psidium - Guava nos 2.00 130.00

Supply of best quality Shrubs grown in pots/ poly bags of

species with their specification- mentioned below, which are

healthy and completely free form all disease, ready for

Transplanting, inclusive of labour, loading, unloading by

manual means and cartage. All plants tobe approved before

planting by officer-in- charge. The minimum height of plants

to be 45 cms 75 cms depending on the species.

Ornamental grass

1 Providing & Displaying of Pennisetumsetaceum nos 80 370

2 Providing & Displaying of red fountain grass nos 80 55

3 Providing & Displaying of Cymbopogon nos 140 250

4 Providing and stacking of bambusa vulgaris nos 30 110

5 Providing & Displaying of Vernonia nos 40 25

6 Providing & Displaying of Madhumalti nos 10 90

7 Providing & Displaying of Hibiscus Rosa - sinesis nos 35 270

8 Providing & Displaying of Mussanenda erythrophylla nos 30 110

9 Providing & Displaying of canna lily yellow nos 35 120.00

10 Providing & Displaying of canna lilly hybrid lilly orange nos 50 350.00

11 Providing & Displaying of Leucophyllum frutescens nos 35 100

12 Providing & Displaying of Allamanda Cathartica nos 35 45

13 Providing & Displaying of Ixora singaporesis nos 80 45

14 Providing & Displaying of Acalypha nos 50 36

15 Providing & Displaying of Aralia nos 115 70

16 Providing & Displaying of pedilanthus nos 75 170

17 Providing & Displaying of Zephranthus lilly nos 50 190

18 Providing & Displaying of bougainvillea (torch glow) nos 25 323

Providing & Displaying of Madagascar Periwinkle -

20 Providing & Displaying of Murraya paniculata nos 55 25

21 Providing & Displaying of tabernamontana nos 55 45

22 Providing & Displaying of Ficus panda nos 75 35

23 Providing & Displaying of Dianella tasmannica v nos 75 350

24 Providing & Displaying of spider lily / Hymenocallis littoralis nos 55 140

Different Colour Leaves

25 Providing & Displaying Iresine nos 70 20

26 Providing & Displaying of Excoecaria bicolor nos 40 40

27 Providing & Displaying of Croton nos 40 56

28 Providing & Displaying of Bhuddha Belly bamboo nos 25 461

29 Providing & Displaying of tecoma gaudichaudi nos 25 110

30 Providing & Displaying of caesalpinia pulcherrima nos 20 200

DESCRIPTION UNIT QTY RATE AMOUNT

Fragrant and nectar shrubs

31 Providing & Displaying of Citrus limetta nos 10 250

32 Providing & Displaying of gardenia jasminoides nos 10 230

33 Providing & Displaying of Mari gold winter nos 25 180

34 Providing & Displaying of Alpinia zerumbet nos 10 250

35 Providing & Displaying of sanservieria variegated nos 10 300

36 Providing & Displaying of Syngonium nos 30 194

37 Providing & Displaying of Golden Fern nos 25 85

38 Providing & Displaying of Raphis excelsa nos 10 100

Providing and stacking of wedelia trilobata, well developed

to 20 leaves, full of branches and foliage in 25 cm size of

Earthen Pot/Plastic Pot & as per direction of the officer-in-

Providing and stacking of Alternantha developed with fresh &

2 healthy in 25 cm size of Earthen Pot/Plastic Pot & as per nos 500 50.00

direction of the officer-in-charge

Providing and stacking of Ophiopogon, Green/Black full of

3 leaves in 15 cm size of Earthen Pot/Plastic Pot & as per nos 500 20.00

direction of the officer-in-charge.

Providing and stacking of Roheo in 20 cm size of Earthen

Pot/Plastic Pot & as per direction of the officer-in-charge.

Preparation of mounds of various size and shape by available

excavated / supplied earth in layers not exceeding 20 cm in

1 depth, breaking clods, watering of each layer, dressing etc., cum 120.00 401.30

lead upto 50 meter and lift upto 1.5 m complete as per

direction of Officer-in-charge.

(Maintenance work)

Comprehencive maintainence including maintaining and

operating and replacing all assets if necessary install in garden

including green space and providing supervisor, watchman,

sweeper etc and redevelopment of lawn, scrub, tree etc as

required and cleaning of external and internal pathway,

Gajiba, jogging track all benches, all dustbin,, watering plants

all overhead and under ground tanks, all stone floors and

dedos and all garden area as specified and by engaging labour

force with cost of material and labour and all taxex for all

works as directed by engineer in charge.

For 3 years (+2years expandable) Sqm. 1500.00 675.00

DESCRIPTION UNIT QTY RATE AMOUNT

Providing services of Tata 407 vehicle for carriage of purned

branches/leaves of the trees from the pruning site

including loading/unloading lifting upto approved

municipal dumping ground as per direction of Engineer-in-

charge as and when required including cost of Diesel, Mobil

oil, driver and four labours all in uniform with necessary T&P

such as spade, bill hook, rope, tasla, hassion cloth, safety

cones etc., all complete. (Atleast Tempo/Tata 407 should be

loaded upto the body mark of

vehicle for counting a trip).

ESTIMATE FOR ELECTRICAL WORK- PLOT NO. 410, NEAR NARENDRA MODI STADIUM

GATE NO. 3 AHMEDABAD

DSR / AOR / SOR

S. NO. DESCRIPTION AMOUNT

AMOUNT WITH GST

A CABLE,EARTH PIT, FEEDER PILLAR, POLE & FIXTURES

2 CABLE LAYING AND END TERMINATIONS

3 FEEDER PILLER

5 Turnkey Factor

B POLE & FIXTURES 836279

SUB TOTAL-A ₹ 2,477,499.00 ₹

Total Amount x 5% /60 month ₹

Total Amount x 5% /60 month ₹

Caring operation & maintenance (under DPL) rate

including necessary repaired & replacement of damages 60 ₹

material. For 5 years (60 month)

C BUILDING (Community center)

1 DISTRIBUTION BOARD

2 INTERNAL WIRING

3 SITC FANS & LIGHT FIXTURES

E SUBMERSIBLE PUMPS

F WATER COOLER & RO

SUB TOTAL - B' ₹

Total Amount x 5% /60 month ₹

Total Amount x 5% /60 month ₹

Caring operation & maintenance (under DPL) rate

including necessary repaired & replacement of damages 60 ₹

material. For 5 years (60 month)

ESTIMATE FOR ELECTRICAL WORK- PLOT NO. 410, NEAR NARENDRA MODI STADIUM GATE NO. 3 AHMEDABAD

SUBHEAD:ELECTRICALWORK

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A SCHEDULEITEMS

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty

1.1 cover. (A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

1.2 Length of pipe - 1 Mtr 7 4546

Back filling compound - 1 Nos Bag of 15 Kg.

(b)For Electrical installation up to 11 kV in normal soil.

1.3 Length of Pipe : 2.00 mtrs 8 5703

Back filling Compound :1 no. Bag of 25 Kg.

1.5 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. KG 350 77

TOTALFOREARTHINGCARRIEDOVERTOSUMMARY

CABLE SUPPLY, LAYING, DWC HDPE PIPE, CHAMBER (MANHOLE) AND END

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

2.1 Aluminium conductor for 1.1 kV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

2.2 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) meter 550 450

Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

3 Aluminium conductor for 1.1 kV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

3.1 4 core 10 Sq. mm meter 250 167

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid

4 Copper conductor for 1.1 kV. to be laid on wall with necessary clamps or in existing

trench / pipe at road crossing or floor of following size of cables.

4.1 4 core 6 Sq. mm meter 350 631

4.2 3 core 6 Sq. mm meter 200 490

4.3 3 core 4 Sq. mm meter 250 356

4.4 3 core 2.5Sq. mm meter 550 266

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the Mtr.

fault all over the run and back filling the same and making the surface as normal ground. 1250 55.00

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for Mtr.

laying any size of cable or locating the fault all over the run and back filling the same and 850 74.00

making the surface as normal ground.

(B) If additional machinery like hammer driller or JCB use [Add] Mtr. 500 354.00

Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & Mtr.

also on both sides with covering of 7. 5 Cm. layer of sand above & below cable (16 bricks 0 139.00

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road surface

for enclosing cable (A)50 mm outer dia

5.1 50 mm outer dia meter 350 62

5.2 90 mm inner Dia. meter 650 95

5.3 120 mm inner Dia. meter 150 136

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

7 insulated armoured cable complete with out going tails, insulating tape etc for following

size of cables.

7.1 2 to 4 core 2.5 / 4 Sq. mm Set 50 33

7.2 2 to 4 core 6 Sq. mm Set 30 38

7.3 2 to 4 core 10 Sq. mm Set 20 38

Providing and, fixing heavy duty flange type brass double compression type cable gland

8 with rubber ring for PVC insulated armoured cable complete with out going tails, insulating

tape etc for following size of cables.

8.1 3 & 1/2 core 70 Sq. mm Set 4 102

providing and erecting Mains with ISI marked electrolyte stranded copper conductor, Non

PVC Zero Halogen free fire retardant insulated copper conductor, insulated wire (HRFR)

conforms to IS-694, erected in existing pipe with 1.5sq. mm copper conductor of same

specifications for earth continuity of following size.

9.1 [c] 2 wire 1.5 sq.mm meter 300 64

TOTAL FOR CABLE LAYING, DWC HDPE PIPE, CHAMBER (MANHOLE) AND END

TERMINATIONS CARRIED OVER TO SUMMARY

B NONSCHEDULEITEMS

FEEDER SECTION PILLAR TYPE-A (3-4 FEEDER)

Supply, installation, Testing and commissioning of the Feeder Section Pillars as per

specifications, IS and Drawings The unit rate for each item shall include: Call for final

inspection prior to dispatch. Delivery of the fidder pillar / section pillar to site. Shifting of the

fidder / section piller from site to store to the suitable location. Shifting & Fixing of Section

Pillar. Assembly and wiring of component supplied separately. Installation of section piller to

including removing old section pillar. Earthing all components, frame etc. to a common

10 internal earth bar. M.S. parts should painted with powder coating. Supply & fixing all Set 2 49161

accessories and supporting structure. Supply & fixing of M.S. 40 x 40 x 6 channels for fixing

the panels. Connection, testing and commissioning Checking of internal connection and

wiring, operation of switches, starter, MCCB, relays, contactors etc. Supply of necessary

tools, hardware, testing equipment etc. etc. Electrical contractor shall carry out the

insulation test at site and all the readings shall be submitted in duplicate to the consultant or

engineer-in- charge. Approval from State Electricity Board &Liason work.

10.1 FEEDER SECTION PILLAR TYPE-B (2-3 FEEDER)

Supply, installation, Testing and commissioning of the Feeder Section Pillars as per

specifications, IS and Drawings The unit rate for each item shall include: Call for final

inspection prior to dispatch. Delivery of the fidder pillar / section pillar to site. Shifting of the

fidder / section piller from site to store to the suitable location. Shifting & Fixing of Section

Pillar. Assembly and wiring of component supplied separately. Installation of section piller to

including removing old section pillar. Earthing all components, frame etc. to a common

11 internal earth bar. M.S. parts should painted with powder coating. Supply & fixing all Set 2 30602

accessories and supporting structure. Supply & fixing of M.S. 40 x 40 x 6 channels for fixing

the panels. Connection, testing and commissioning Checking of internal connection and

wiring, operation of switches, starter, MCCB, relays, contactors etc. Supply of necessary

tools, hardware, testing equipment etc. etc. Electrical contractor shall carry out the

insulation test at site and all the readings shall be submitted in duplicate to the consultant or

engineer-in- charge. Approval from State Electricity Board &Liason work.

11.1 TOTAL FOR FEEDER PILLAR CARRIED OVER TO SUMMARY

12 Turnkey Factor

Providing of turnkey factor to the concirn eletric department as per the load to be opretor in

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A SCHEDULEITEMS

(b) LED Bollard fittings of minimum height 600 mm & dia.100mm having polycarbonate

clear/milky diffuser mounted on 3mm thick aluminium finished powder coated pipe with

base plate 160x160mm with erection by M8x75mm fastner with required RCC

foundation.IP66 for 9 to 20 watt ,surge-4kv cat- III

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum

2 canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and

accessories wired upto terminal block.IP

2.1 (ii)32-40W Cat-III on 4M pole Each 11 4056

Supply of approved make frp/grp pole having followiing specifications :

FRP/GRP pole made by centrifugal moulding process using thermoset resin polyester/epoxy

resin system having minimum glass content 45.0%.The pole should be in one pieceand tapered

round in shape,having smooth outside surface finish and should be totally fre from

corrosion as well as non conductive and shock proof. Pole should be provided with FRP/GRP base

bracket dully fabricated from metal(M.S) and dully claded with FRP/GRP material to avoid any

metal exposer and painted with PU paint. Pole should mechanical properties i.e

Specfic gravity (ASTM D 792) 1.3-1.8 Kg/m3, 2. Glass Content % by weight (ASTM D 2584)

45.0 -55.0%, 3. Water absorption (ASTM D 570) <0.5%, 4. Tensile Strength(ASTM D 638)

200+/-50Mpa, 5. Flexural strength (ASTM D 790) 250+/-50Mpa, 6. Compressive Strength (ASTM D

695) 200+/-50MPa, 7. Yeild Strength(ASTM D638) 250 +/-50MPa. Pole should be flame retardant as

per IS 6746.Resin used shall be UV resistance and pigmented. Pole should be painted with first coat

of epoxy primer and then two coat of highly weather resistance polyurethen paint to ensure proper

addhesion of the paint.Minimum thickness shall be 80 to 100 micron.Defelection of the pole shall

not exceed more than 10.0 % of the length of the pole for the given load.Pole should be generally

made as per the dimensional data, performance criteria and some interchagebility features of

poles as per the standard ANSI C123.20 latest version of ASTM D 923/01 including cable

termination box with necessory

accessories.The size of pole and type of installation with foundation , Anchor Base & Internal

junction box as per the

Pole should be flame retardant as per IS 6746.Resin used shall be UV resistance and pigmented.

Pole should be painted with first coat of epoxy primer and then two coat of highly weather

resistance polyurethen paint to ensure proper addhesion of the paint.Minimum thickness shall be

80 to 100 micron.Defelection of the pole shall not exceed more than 10.0 % of the length of the

pole for the given load.Pole should be generally made as per the dimensional data,performance

criteria and some interchagebility features of poles as per the standard ANSI C123.20 latest version

of ASTM D 923/01 including cable termination box with necessory accessories.The size of pole and

type of installation with foundation , Anchor Base & Internal junction box as per the manufacturer

details and site requirement .

3.1 (3) 'B' class (Heavy Duty) frp/grp pole suitable for base plate mounting

[B] Overall Length of 4.0 meter, Average thickness : 4mm, Top/Bottom Outside Dia. 76/143mm

+/-2.Weight of Pole 10.0 Kg approx. (Without base) Metal Anchor Base dully frp claded (Size : 290 Each 11 12320

Ø * 12mmthk , Mounting hole PCD 240mm * 4 nos. of 16 Ø hole)

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm

dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for

4 & 6 mtr pole)

Providing 1:2:4 cement concrete foundation & 70% PCC from bottom including excavation for

the pole of size 60 x 60 x 150 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm

dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner.

(for 9 & 10 mtr pole)

Pole should be flame retardant as per IS 6746.Resin used shall be UV resistance and

pigmented. Pole should be painted with first coat of epoxy primer and then two coat of highly

weather resistance polyurethen paint to ensure proper addhesion of the paint.Minimum thickness

shall be 80 to 100 micron.Defelection of the pole shall not exceed more than 10.0 % of the length

of the pole for the given load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility features of poles as per the standard ANSI

C123.20 latest version of ASTM D 923/01 including cable termination box with necessory

accessories.The size of pole and type of installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site requirement .

6.1 (3) 'B' class (Heavy Duty) frp/grp pole suitable for base plate mounting

[H] Overall Length of 10.0 meter, Average thickness : 9mm, Top/Bottom Outside Dia. 76/244mm

6.2 +/-2.Weight of Pole 62.0 Kg approx. (Without base) Metal Anchor Base dully frp Each 6 39984

claded (Size : 450 Ø * 18mmthk , Mounting hole PCD 390mm * 6 nos. of 20 Ø hole

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

7 efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM- 79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-66), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

7.2 (v) above 160 to 200 watts Cat-III Each 36 8120

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Each 61 295

TOTAL FOR LIGHT FIXTURE CARRIED OVER TO SUMMARY

SITC of 40W Height 4200mm, Light Distribution 360° diffuser height 2310mm Electronic driver

ON/OFFLight Column. IP rating IP65, IK-10, Colour Temperature : 3000K Light Distribution :

Symmetrical, Extruded aluminium bottom ribbed pipe (grade 6063 with test certificate) Ø166 x

3mm thickness & die-cast aluminium top cover. SS fasteners. Pre treated silicone gaskets. PDC

aluminium service door 348mm height x 110mm width at 338mm height above the base plate shall

be provided with the company logo embossed on the bottom of the door and safety rope. The

control gear tray is prewired with 2.5 Sq.mm cable, 6A MCB and 32A terminal connectors for loop-

in / loop-out arrangement. MS mounting plate Sq. 250 x 12mm thick steel of grade E250 to IS

2062:2011 with 4 elongated holes 38 x 19 to suit M16 bolts at CC180. This mounting steel plate

along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially

designed foundation pole. Hot dip galvanised foundation bolt. Mechanical resistance IK10.Pure

polyester powder coated process : Mild shot blast & pure polyester powder coating. Translucent

polycarbonate diffuser of 3mm thickness with light emission. Lamp fixed position. This luminaire

contains built-in LED modules. LED modules are engineered accordingly to the existing regulations

of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire >

60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver

efficiency >85%, power factor >0.9, THD <10%, Surge protection 6KV. Column Light.CE and BIS.

Supply, installation, testing and commissioning of tree up lighter Adjustable ground recessed Led

fixture tree up light, 3W LED light for tree up lighter. Fixture shall have Ingress protection of IP

1 for the optical part and the driver suitable for exterior grade installations. Make Philips, Havells Each 12 9631

/Crompton specifications to be approved by consultant before procurement. foundation included

TOTAL FOR LIGHT FIXTURE CARRIED OVER TO SUMMARY

ESTIMATE FOR ELECTRICAL WORK- PLOT NO. 410, NEAR NARENDRA MODI STADIUM GATE NO. 3 AHMEDABAD

SUBHEAD:ELECTRICALWORK

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A BUILDING (Community center)

DISTRIBUTION BOARD & INTERNAL WIRING

DISTRIBUTION BOARD

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

1860 IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used) suitable for single phase incoming and

horizontal single phase outgoing

(b) sheet steel bouble door (IP 43)

1871 8 way, sheet steel double door Ea. 3 1141

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having

KA breaking capacity & confirms to IS: 8828 in existing box having following capacity

40 amps DP Cat.III Nos 3 359

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate

1739 on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

1742 Single pole Nos. 24 122

providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with

all advance feature & do not incorporate any electronic component. for following Max,

rating erected as directed

40 amps DP Cat.III Nos. 3 2434

Total carried over to Summary

INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type switch / bell push &

11 accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(g) with 16 swg HGS metal conduit pipe and accessories painted black. erected concealed

in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(g) with 16 swg HGS metal conduit pipe and accessories painted black. erected concealed

in wall/ceiling complete- Cat. III

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(B) With 16 swg HGS metal conduit pipe and accessories painted black.

(c) 3 wire 1.5 sq. mm Mtr. 1250 184

(d) 3 wire 2.5 sq. mm Mtr. 750 215

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size

(B) with 16 swg HGS metal conduit pipe and accessories painted black.

(d) 3 wire 4 sq. mm Mtr. 350 253

(e) 3 wire 6 sq. mm Mtr. 250 333

(f) 3 wire 10 sq. mm (use earth wire of 4 sq.mm ) Mtr. 450 487

(i) 4 wire 10 sq. mm (use earth wire of 4 sq.mm ) Mtr. 50 598

Providing & erecting following type of Modular Type Accessories with necessary

connection. As desired by Engineer In charge

(1) 6 Amp. SP one way switch Each 10 27

(2) 16 Amp. SP one way switch Each 12 51

(3) 6/16Amp. Universal socket Each 12 82

(4) 6 A socket Each 10 42

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket,

company fabricated powder coated sheet steel enclosure erected as directed with

[A] Metal Clad Socket with metal clad top

Cat.III Each 6 574

SITC FANS & LIGHT FIXTURES

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT

K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV Each 80 584

(iv) 22-24 watts, Surge-2 KV Cat-lll Each 71 751

(D) LED Strip Light

(i) Minimum 4.8W-120 LED per meter (2 wire, IP-66) with non integral suitable Driver complete

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long Each 6 309

Supply, Installation, Testing and Commissioning of suitable 1200 sweep, BEE 5 Star rated,

Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class

of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-

2019), THD < 10%, with remote unit for Speed Control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable

for 140 to 285 Voltage and rectifier circuit with surge, over current and overload protection

, 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall be

approved by Engineer in Charge]

(B) 1200 mm Sweep (48") Each 6 2857

Supplying & erecting single phase approved make industrial exhaust fan suitable for

medium duty ring mounted low noise operation suitable for medium duty having following

dia size and maximum speed in RPM

[B] 380 mm dia 900 RPM Cat.II Each 4 2713

Supplying Table fan approved make A.C. 23OV, 50 c/s. 40 cm. sweep oscillating complete

with 3 mtrs. of 3core round flexible wire and 3 pin plug top. [ Make shall be Each 4 1823

approved by Engineer in Charge]

ESTIMATE FOR ELECTRICAL WORK- PLOT NO. 410, NEAR NARENDRA MODI STADIUM GATE NO. 3 AHMEDABAD

SUBHEAD:SUBMERSIBLE PUMPS

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A SCHEDULEITEMS

SUBMERSIBLE PUMPS

S.I.T.C. submersible pump set for bore of 200 mm. dia. or more having 3 phase motor capacity

about 25 H.P. and discharge capacity having . Lifting and Lowering taken extra.

(A) (12 Stage) 472 to 330 L.P.M. discharge at the head 120 to 192 mtrs. suitable for 65 mm

dia. delivery pipe Cat-III

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper

cable approved make of following Size.

(E) 3 Core x 10 Sq. mm. Mtr 400 293

Supplying & erecting ISI Marked (Embossed) following size of “B” Class G.I . Pipe & erecting

as directed by Engineer-in-charge with necessary plumbing as desired.

(C) 40 mm dia Mtr 500 210

TOTAL FOR LIGHT FIXTURE CARRIED OVER TO SUMMARY

ESTIMATE FOR ELECTRICAL WORK- PLOT NO. 410, NEAR NARENDRA MODI STADIUM GATE NO. 3 AHMEDABAD

SUBHEAD:WATER COOLER & RO

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

A SCHEDULEITEMS

WATER COOLER & RO

Providing & Erecting full SS Body (SS 304) Split type water cooler having storage capacity 160 to

175 Ltr.(Tank SS 304) & Cooling capacity 150 ltr. Per hour @ an ambient temp of 350 C.The outlet

temp. of the water should drop by 150C within a hour,The water cooler should be comprising of

hermetically sealed Reciprocating compressor with R134A, fan motor, Copper Condensing unit

with company fabricated Outdoor Unit water tank surrounded by evaporating coil, thermostats,

relay etc.complete with necessary copper tube & Insulation, M.S Chanel Stand with Painting for

water tank & M.S. Powder Coated Stand for Outdoor unit with Installation. With DPELCB and

Way DB Box with accessory Three core Cord for connection.

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder

coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable

buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter auto low & high

pressure switches with following size of storage tank & LPH capacity & erected as directed

[C] 50 Ltr / Hr with 150 psi 2 nos booster pump Each 1 28899

TOTAL FOR LIGHT FIXTURE CARRIED OVER TO SUMMARY

Plot no. 410 near Modi stadium Park Ahmedabad

DSR / AOR / SOR

S. NO. DESCRIPTION AMOUNT

AMOUNT WITH GST

SUB TOTAL -B ₹ 1,184,727.00 ₹

SUB TOTAL - B' ₹

Total Amount x 5% /60 month ₹

Total Amount x 5% /60 month ₹

Caring operation & maintenance (under DPL) rate

including necessary repaired & replacement of damages 60 ₹

material. For 5 years (60 month)

Plot no. 410 near Modi stadium Park Ahmedabad

SUBHEAD:ELECTRICALWORK

Description Unit Qty Rate Total Amount

Description Unit Qty Rate Total Amount

1 AUDIO & CCTV SYSTEM

SUPPLY, INSTALLATION, TESTING & COMISSIONING OF HIGH-SPL FOREGROUND

MUSIC SPEAKER WITH A 8" LF8 DRIVER OR BETTER AND EMB2S EXTENDED HIGH-

FREQUENCY COMPRESSION DRIVER, BIAMPLIFIED 2WAY ARRAY LOUDSPEAKER

SYSTEM; WITH INDIVIDUAL MODULE FREE FIELD FREQUENCY RANGE (-10DB) OF

80HZ - 18KHZ OR BETTER & PEAK POWER HANDLING OF >= 800W LF . THE

LOUDSPEAKER MODULE SHALL HAVE A MAX. SPL (PEAK) OF MF/HF>= 121DB OR

BETTER. IT SHOULD HAVE HORIZONTAL NEAR DISPERSION PATTERN OF 90º OR

BETTER, VERTICAL DISPERSION OF THE ARRAY SHALL BE 60º OR BETTER. THE

MODULES SHALL HAVE A WEATHER RATING OF IP55. including SUPPLY,

INSTALLATION, TESTING & COMMISSIONING OF OEM AU SHAPE MOUNTING

ARRANGEMENT FOR SUSPENSION OR WALL MOUNTING OF THE MODULES

OFFERED ABOVE.MAKES.

SITC OF 8 CHANNEL CLASS D NETWORKABLE POWER AMPLIFIER WITH A MAX

OUTPUT POWER OF 8X500W@8 OHMS, OR BRIDGED MODE OUTPUT POWER OF

4X 1000W @ 8/4 OHMS. 20HZ - 20 KHZ, SNR OF 102DB AND THD + N OF <0.4% WITH

BUILT IN PROTECTION SUCH AS LIMITERS, TEMPERATURE, DC, SHORT CIRCUIT,

45 PEAK CURRENT LIMITERS, TURN ON DELAY ETC. BUILT IN DSP FOR MATRIX Nos. 1 251,160.00

ROUTING, SPEAKER EQUALIZATION, DELAYS, ARRAY EQS ETC. COMPLETE WITH

ETHERNET PORT FOR NETWORK CONTROL, PROGRAMMING AND MONITORING.

SHALL OFFER OPTIONAL NETWORK AUDIO CONNECTIVITY (DANTE OR

COBRANET) THROUGH EXPANSION SLOT. .MAKES. JBL

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 2 CONDUCTOR

AWG(168 X 34) OXYGEN-FREE BARE COPPER (HIGH CONDUCTIVITY) CABLE NEC

46 TYPE CM AND CL3 TYPE FOR AUDIO ONLY WITH DC RESISTANCE: 1.60 Ω/1000FT. Roll. 1 28,704.00

,MUTUAL CAPACITANCE: 22.3PF/FT.,VOLTAGE RATING: 300V,MAXIMUM CURRENT:

17A@25˚C, AND CABLE ROLL PACKING -500 MTR. .MAKES. BELTEN

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF CAT6 UTP 23AWG

TWISTED PAIR ARMORED CABLE, SUPPORTS GIGABIT ETHERNET (1000 BASET)

STANDARD. OPERATES AT BANDWIDTH OF 250 MHZ. THIS CABLE WELL EXCEEDS

THE REQUIREMENTS OF TIA/EIA-568-C.2.,CONDUCTOR RESISTANCE (DC):

OHM/1000 MTR @20°C MAX,IMPEDANCE: 100±15% OHM AND TEMPERATURE

RATING: -20° TO + 60°C .ROLL PACKING:305 MTR.ENHANCED PERFORMANCE

CABLE FOR TRANSMISSION OF HIGH SPEED DATA, DIGITAL AND ANALOGUE

VOICE AND VIDEO (RGB) SIGNALS ON LANS. MAKES- D-LINK

SITC OF WEATHERISED ENCLOSURE FOR AUDIO AMPLIFIER WITH FRONT DOOR,

FRONT AND BACK ADJUSTABLE MOUNTING RAILS, 1 FAN MOUNTING PROVISION,

TOP AND BOTTOM CABLE ENTRY PROVIDES OPTIMAL FLEXIBILITY FOR CABLE

MANAGEMENT,EASY WALL MOUNT PROVISION, EASY INSTALLATION- STANDING /

WALL MOUNTING OPTION COMPATIBLE WITH INTERNATIONAL STANDARDS AND

ENCLOSURE DIMENSION'S ARE WXDXH (600 X 600 X 340 MM). MAKES- LIBERTY

TOTAL FOR AUDIO SYSTEM CARRIED OVER TO SUMMARY

Supply, Installation, Testing and Comissioning of USB Full HD 1080p@30fps Web

Camera, 1/3”, 2.07MP sensor, 60 Degree FOV, built in Mic, 360 degree manual rotation,

3355 privacy shutter, MJPEG compression format, Auto Focus, Auto white balance & other Each 6 17,122.00

image processing algorithms, USB 2.0, BIS, CE,FCC, RoHS certified,

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CENTRAL CONTROL UNIT For DCN Next Generation or DCN wireless systems,

or a combination of the two In single‐CCU; maximum 245 wired contribution units, plus

wireless delegate units For multi‐CCU systems, with up to 30 CCU’s and a total of

contribution units Voice activated microphone mode for wired and wireless systems

Ethernet connection for configuration and control computers [Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

Supply, installation, testing and commissioning of 42" Video Display System with Network

Video Recorder , Live view/Resolution 5MP/3MP/1080p/720p,Motion Detection Control

Privacy Mask Control. USB interface-1 × USB 2.0 and 1 × USB 3.0,Security-HTTPS, SSL,

Watermark, User Authentication, Miscellaneous-N+1 hot spare. Alarm in/out -4 / 1,Network

interface-1 RJ-45 10 /100 /1000 Mbps self-adaptive Ethernet interface, Security-HTTPS,

51 SSL,Video/Audio output-VAG,HDMI and Audio. Watermark, User Authentication,Incoming Nos 1 306,729.50

bandwidth-100Mbps,Outgoing bandwidth-80Mbps,HDMI output,VGA Output,Protocol-IPv4,

IPv6, TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS,

and iSCSI are supported.TCP, UDP and RTP for unicast, UPnPTM, ONVIF, PSIA,Support

100 IP Camera, 2 SATA interfaces for 4 HDDs Upto 6TB for each disk. Make-

Tyco/Mobotix/Pelco

SITC of 20 x SFP ports

4 x Combo 10/100/1000BASE-T/SFP ports

4 x 10G SFP+ ports

6 kV surge protection on all RJ-45 access ports

Switch Resource Management (SRM) for flexible

management of system resources

Redundant Power Supply (RPS) support

MPLS L2VPM/L3 VPN support

Full L3 routing protocol support including OSPF, BGP, and

ISIS for IPv4/IPv6

SDN-enabled switch, compatible with Openflow

10-GbE SFP+ to SFP+ 1M Direct Attach Cable [Approved

by Competent Authority i.e. not Below the rank of Executive

53 Surge protector for Video & power signal to Safeguard the camera from any kind of Surges Nos 1 3,230.00

54 42U Rack including all accessories as complete as required. Nos 1 66,492.00

55 12U Rack including all accessories as complete as required. Nos 1 36,943.00

SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m

56 [Approved by Competent Authority i.e. not Below the rank of Nos 6 1883

Executive Engineer ]s required.

Cat 6 information outlet that should confirm or exceed component specifications TIA/EIA-

568-B.2-1 standards for physical & electrical Specifications, should be fully unshielded type

and should have the tool less mechanism with inbuilt crimping tool and it should be Third

Party certified and tested including G.1. Box & Modular cover plate, (RJ- 45).

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Supplying, installing, testing and commissioning of UL Listed ONVIF Compliant 8 channel Network

Video Recorder with 2 SATA HDD Slots with storage of 8 TB storage , Recording Bandwidth up to

320 Mbps , Recording Resolution 8MP(4K) , 5MP ,3MP,2MP,1.3MP,1MP, Alram I/O 16 Ch Alarm in

1Ch Alarm out , Ethernet RJ-45 (1000 Mbps)

BRE Global certified 3c x 1.5 sq.mm Fire Survival armoured cable with Class-2 Copper

conductor as per BS EN 60228, twisted, with Mineral ceramic glass fire barrier tape

covered by an extruded layer of Cross-linkable Low smoke zero halogen (LSZH) insulation

as per BS EN 50363 and 1.SZH inner & outer sheath as per BS:7846. Should retain Circuit

integrity as per clause 26 2e of BS: 5839-1. BRE Global & LPCB-FPC certificates to be

provided. Outer sheath should be Anti-Rodent

60 IP 66 rated whether proof Junction Boxes for Camera Nos 6 6,805.00

61 HDPE Duct (40 mm) complete with all accessories as required. Mtr. 350 107

62 Underground/Over ground Laying of HDPE Pipe, OFC/ Power! Data/ Coaxial cables- Mtr. 350 538.00

63 SITC Armoured 6 Core Optical Fiber Cable Single mode for induvial junction connection. RM 350 239.00

64 Supply & laying of Cat-6 Armoured Cable for out door camera RM 450 102.00

TOTAL FOR CCTV CARRIED OVER TO SUMMARY

Plot no. 410 near Modi stadium Park Ahmedabad

SUBHEAD:LED SCREEN WORK

Description Unit Qty Rate

Supply, Installation, testing of commissioning of LED Display Screen (3000MM’×2000MM) outdoor type

complete with LED modules, cabinets, SMPS, receiving cards, internal wiring etc. LED Video Processor /

Controller (e.g. NovaStar / equivalent) Main Control System (PC / Media Player with licensed software) Power

Distribution Board with MCB, RCCB, SPD & cabling MS Mounting Structure / Frame (wall mounted / floor Nos 1 671299

mounted as required) Power & Data Cables (HDMI, Cat6, signal cables etc.) including alignment & fixing

Transportation, Loading & Unloading Warranty (Minimum 1–3 Years)

Total for LED Screen

Plot no. 410 near Modi stadium Park Ahmedabad

S.N. DESCRIPTION UNIT QUANTITY RATES AMOUNT

1 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar

Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame

With Twin Wall Profile, Front Cover : High Transmission Low-Iron Tempered Glass

(AR Coated), High efficency and positive power tolerance Pmax: 0/+5, Module

Efficiency should be approx. 19.5%-22%, Normal operating temperature 45'C,

Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed with Bypass

diodes, 100% Electroluminescence test to ensure error free Modules, Thep. temp.

co-efficient of the PV module shall equal or better than -0.45%/degree C. Solar PV

modules of minimum fill factor 75% to be used. Unit Production:- More than

Unit /kw /day (Actual)(1Year Avg) With 10 year Product warranty and 25 year

Linear Power Warranty includes all mechanical and electrical parameters of the

Solar panel. Modules must be complied to the DCR(Domestic content

requirements). The Ration of AC to DC is 5:6 for the Installation capacity which are

given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency: 97.5% -

98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor:

~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Integrated

protection of Inverter are Anti-islanding Protection, Input Reverse Polarity

Protection, Insulation Resistor Detection, Ground fault protection, Residual Current

Monitoring Unit, Output Over Current Protection, Output Short Circuit Protection,

Output Over Voltage Protection, PV array string fault Protection. Protection

Degree: IP65, User Interface LCD & APP, Datalogger & Communication: GPRS /

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output Over

Current Protection Integrated, Output Short Circuit Protection Integrated, Output

Over Voltage Protection Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure: The

mounting (Rectangular pipe / square pipe / circular pipe) with requisite cross bars,

nuts and bolts, etc. shall be Hot deep galvanized with minimum 80micron coating.

The Rectangular / square /circular hollow pipe section used for the structure should

have a minimum thickness of 2.0 mm. other than above, the material thickness

should be minimum 2.5 mm. A certificate of a structural engineer certifying the

strength and stability of the mounting structure to withstand the weight and wind

speed of 150 km/hour throughout the life span of 25 years of the system, shall be

submitted by the vendors. Hot Dipped Galvanized steel coils. suitable arrangement

for base plate for foundation , solar panel mounting, the structure should be

suitable for carry the load of solar panel,wiring, sprinkler system etc. with

necessary foundation work/wall mount, j bolt, anchor fastner etc. the nut bolt used

for installtion of stucture should be (SS 304) quality.The ground clearance of the

bottom most edge of solar panel shall not be less than 300 mm to 1200 mm or as

per site’s technical/feasibility requirement.

a. Column –The minimum section (thickness) should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section (thickness) should be 40MM * 40MM Balane of

System with necessary Swichgears (Suitabel size and protection of ACDB &

DCDB), inter connecting wiring, earthing system as per the CEIG drawing

approval, lightining arrester system as per the CEIG drawing approval, all liasoning

work with various gov. dipartment like state nodal agency,DISCOM & CEIG is

included in agency scope

(C ) Grid Tied Solar Power System: 11 - 25 kW

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

2 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe

of following size of cables

3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) meter 250 262

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault

all over the run and back filling the same and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for

4 laying any size of cable or locating the fault all over the run and back filling the same and meter 150 74

making the surface as normal ground.

(B) If additional machinery like hammer driller or JCB use [Add] meter 250 354

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road surface

for enclosing cable (A)50 mm outer dia

90 mm inner Dia. meter 250 95

120 mm inner Dia. meter 50 136

Supply of Approved make Iron Clad or metal clad four pole change over switch 415V.

confirming to IS of following capacity