MID/AN/79

Select, Excess (+), Less (-)

Tender Inviting Authority: Executive Engineer MID Akhnoor/Nowshera

Name of Work:Strengthening / Restoration / partial rewinding of 650 HP BHEL make solid shaft 6.6 KV, 485 KW HT motor Rotor of unit- 03 at L.I.S. Ranjan.

Contract No: 79/MID/AN Dated 06-12-2025

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Rebate in percentage VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total Amount without rebate Rebate in Rs TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 1. Dismounting of 485 kW, 650 HP BHEL Make HT motor from its place of installation by way of disengaging all its three phase cable connections of rotor, stator, commutator assembly, trifurcated sealing box, etc. Opening & disengaging coupling set (Motor half coupling & Pump half coupling) of Unit No. 03, separating motor from motor skirt by opening all its nuts & bolts and placing motor on steel fabricated stool properly. 01 no. Complete job. 2. Transportation charges of the motor from the site of installation to workshop for repairs / replacement of spares and back shifting to the LIS Ranjan for installation. Complete charges involving mechanical carriage, loading / unloading, hiring charges of crane etc. 01 no. Complete job 3. Extraction of the rotor from the motor assembly by way of removal of all top cover bolts, removal of slipring assembly and then disengaging of the rotor and stator connections, interlocking for facilitating repairs of the rotor. 01 no. Complete job 4. Removing of old banding from both ends of rotor and insulation from the overhang connections by de-soldering on both ends and tracing out the defective, faulty flashed strips of rotor and extractions of flashed/defective strips, cleaning the rotor slots with recommended chemical cleaner. 01 no. Complete job 5. Restoration of repairable strip which includes extraction from slot, repairing, insulating completely, insertion thereof in the respective slot, and checking setting etc. its IR value. Also replacing all the burnt, damaged, cracked wedges and cleaning its slot with chemical cleaner. 13 no. Complete job 6. Insertion/ replacement of new complete insulated strip in place of old, flashed, damaged strips in respective slots, checking of its IR value. 06 no. Complete job 7. Soldering of all dismantled over hanged both end connections of the rotor, insulating and setting in line. Providing and resetting magnetic steel wire banding on both ends of rotor and also its overhangs with proper soldering. 01 no. Complete job 8. Re-assembly of the dismounted 485 kW, 650 HP BHEL motor on its place of installation by way of engaging all its three phase cable connections of rotor, stator, commutator assembly, trifurcated sealing box, etc. restoration of all tripping cable connections in their respective points. Bolting, fitting, tightening, and aligning the motor with pump and proper adjustment thereof. Providing / fitting of graphite packing. Testing the motor on load for proper operation. 01 no. Complete job in all respects. Note:- Rebate on old scrap @ 3% Item 1 1 Job 65 Excess(+) Full Conversion INR 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Total in Figures

Quoted Rate in Figures Select

Quoted Rate in Words