REPAIRS /MAINTENANCE INCLUDING POLISHING AND RE-CANNING OF WOODEN FURNITURE ITEMS ISSUED TO OFFICERS MD ACCN ,JCO/ORS MD ACCN AND OTM ACCN OF UNITS DEPLOYED UNDER HQ 31 INF BDE AT INF LINES,BG LINES JAMNAGAR

Amount

Repair to Table 3'X2' or 900X600mm with Drawer FD-41,224

M & L for removing unserviceable top and S& F new Top with 18/19mm prelaminated board Extrior Gde both side laminated as approved shade of dark wallnut shade in high gloss with 6mm thick teakwood beeding duly french polished in wall nut shade as mentioned in drg and as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken leg and S&F new 1 st class hard teakwood Leg complete all as specified in drg and as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken long rail and S&F 1 st class hard teakwood long Rail complete all as specified in drg and as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken short and S&F new 1 st class HW short Rail complete all as specified in drg and as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken long stiffner and S&F new 1 st class HW Long Stiffener complete all as specified in drg and as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken short stiffner and S&F new 1 st class HW short Stiffener complete all as specified in drg and as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken drawer and S&F 1 st class HW drawer complete all as specified in drg and as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken knob and S&F Knob complete all as specified in drg and as directed by Engineer-in-Charge.

S&F new hard PVC shoe with screw & washer complete all as specified

Repair to Table 3'X2' or 900X600mm without Drawer FD-55/284/224/41(M)

M & L for removing unserviceable top and S& F new Top with 18/19mm prelaminated board Extrior Gde both side laminated as approved shade of dark wallnut shade in high gloss with 6mm thick teakwood beeding duly french polished as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken leg and S&F new 1 st class hw Leg complete all as specified in drg and as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken long rail and S&F new 1 st class hw long Rail complete all as specified in drg and as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken short rail and S&F new 1 st class HW short Rail complete all as specified in drg and as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken long stiffner and S&F new 1 st class HW Long Stiffener complete all as specified in drg and as directed by Engineer-in-Charge.

M & L for removing unserviceable/ broken short stiffner S&F new 1 st class HW short Stiffener complete all as specified in drg and as directed by Engineer-in-Charge.

S&F in repairs Knob complete all as specified in drg and as directed by Engineer-in-Charge..

S&F new hard PVC shoe with screw & washer complete all as specified

REPAIRS TO TABLE CENTRE FD-274/29(M)/235

Taking out old unserviceable top and S&F new top of pre-laminated particle board 18/19 mm thick exterior grade as per dark wallnut shade in high gloss shade make NOVAPAN/ARCHID LAM/KIT LAM ISI marked of existing size and 4 mm thick teak wood edging all around for table top complete all as specified directed by Engineer-in-Charge.

Taking out old unserviceable broken long rails and S&F new long rails of 1st class teak wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

Taking out old unserviceable broken short rails and S&F new short rails of 1st class hard wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

Taking out old unserviceable broken legs and S&F new legs of 1st class hard wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

S&F new hard PVC shoe with screw & washer complete all as specified.

REPAIR TO PEG TABLE FD 384

M & L for removing unserviceable/ broken legs and S & F new legs made out of first class teak wood suitable for repair to Peg Table complete all as specified all as specified and directed by Engr-in-Charge.

Removing of old unserviceable existing table top and S&F new table top pre-laminated particle board of 18/19mm thick as per dark wallnut shade in high gloss shade BWP exterior grade of make NOVAPAN/ARCHID LAM ISI marked including 4mm thick teak wood beading all around table top of Peg Table complete all as directed by Engineer-in-Charge.

Removing of old unserviceable long rail and S&F new long rail of 1st class hard wood (TW) as per existing shape and size to peg table complete all as specified and directed by Engineer-in-Charge.

S&F new hard PVC shoe with screw & washer complete all as specified.

Repair to Table Dining 6 /8 Persons : FD-273, 239

M & L for removing unserviceable top and S& F new Top with 18/19mm prelaminated board Extrior Gde bothe side laminated of dark wallnut shade in high glosshade with 6mm thick teakwood beeding duly french polished as directed by Ens neer-in-Charge.

Taking out old unserviceable broken legs S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

Taking out old unserviceable broken long rail S&F 1 st class hw long Rail as per drg and as directed by Engineer-in-Charge.

Taking out old unserviceable broken short rail S&F 1 st class HW short Rail as per drg and as directed by Engineer-in-Charge.

Taking out old unserviceable broken S&F 1 st class HW Triangular wooden bracket 100X100X20mm thick as per drg all as specified and as directed by Engineer-in-Charge.

S&F new hard PVC shoe with screw & washer complete all as specified.

Repair to Table Writing/Medium/Study : FD-249 &FD-275

M & L for removing unserviceable top and S& F Top with 18/19mm prelaminated board Extrior Gde bothe side laminated of dark wallnut shade in high gloss shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.

M & L for removing unserviceable leg and S&F 1 st class hw Leg as per drg as directed by Engineer-in-Charge.

M & L for removing unserviceable foot rest and S&F 1 st class hw foot rest as per drg all as specified and as directed by Engineer-in-Charge.

M & L for removing unserviceable stiffner and S&F 1 st class hw stiffner as per drg all as specified and as directed by Engineer-in-Charge.

M & L for removing unserviceable sides and S&F Sides of cabinet with 18mm thick ply wood BWP grade with 1.5mm thick lamination as per drg, all as specified and as directed by Engineer-in-Charge.

M & L for removing unserviceable short rail and S&F 1 st class hw short rail as per drg all as specified and as directed by Engineer-in-Charge.

M & L for removing unserviceable front/ long rails and S&F 1 st class hw front/long rail as per drg complete all as specified and as directed by Engineer-in-Charge.

M & L for removing unserviceable drawer and S&F 1 st class HW drawer as per drg all as specified and as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

M & L for removing unserviceable cabinet door and S&F cabinet door with locking arrangement as per drg complete all as specified and as directed by Engineer-in-Charge.

Replacement of unserviceable veneer ply of cabinet i.e sides, back, front of cabinet with new veneer plywood BWR grade 4 mm thick as shown in drg all as specified and as directed.

S&F new hard PVC shoe with screw & washer complete all as specified

REPAIR TO TABLE OFFICE OFFICER WOODEN

Removing of old unserviceable existing top and S&F new table top of pre-laminated particle board 18/19mm thick exterior grade as per approved shade of dark wallnut in high gloss make NOVAPAN ISI marked with 4mm thick teak wood other side balancing beading all around table top of table office clerk complete all as directed by Engineer-in-Charge.

Replacement of leg of teak wood, size shape design as in drawing for table office clerk wooden all as directed by Engineer-in-Charge.

Repalcement of long rail made out of teak wood, size, shape design as in drawing for table office clerk wooden all as directed by Enigneer-in-Charge.

Replacement of drawer made of teak wood size, shape design as in drawing for table office clerk wooden including 35mm dia knob all as directed by Engineer-in-Charge.

S&F new hard PVC shoe with screw & washer complete all as specified.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

REPAIR TO TABLE OFFICE CLERK WOODEN

Removing of old unserviceable existing top and S&F new table top of pre-laminated particle board 18/19mm thick exterior gradeas per approved shade of dark wallnut shade in high gloss make NOVAPAN ISI marked with 4mm thick teak wood other side balancing beading all around table top of table office clerk complete all as directed by Engineer-in-Charge.

Replacement of leg of teak wood, size shape design as in drawing for table office clerk wooden all as directed by Engineer-in-Charge.

Repalcement of long rail made out of teak wood, size, shape design as in drawing for table office clerk wooden all as directed by Enigneer-in-Charge.

Replacement of drawer made of teak wood size, shape design as in drawing for table office clerk wooden including 35mm dia knob all as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

REPAIR TO TEAPOY FD WOODEN FD-382

M & L for removing unserviceable/ broken legs and S & F new legs made out of first class teak wood suitable for repair to Teapoy all as specified and directed by Engr-in-Charge.

All as per srl item 5(f) here in before but long Rail/Stiffener/side rails

Removing of old unserviceable existing table top and S&F new table top pre-laminated particle board of 18/19mm thick as per dark wallnut shade in high gloss BWP exterior grade of of make NOVAPAN/ARCHID LAM ISI marked including 4mm thick teak wood beading all around table top of Teapoy complete as per approved colour and shade all as directed by Engineer-in-Charge.

S&F new hard PVC shoe with screw & washer complete all as specified.

REPAIRS TO BED PLYWOOD TOP FD-247 & FD-246

M & L for removing unserviceable / broken leg from bed plywood top and S & F new leg made out of 1st class teak wood and made to shape and all as shown on drg and as directed by Engr-in-Charge.

M & L for removing unserviceable plywood from Head board of Bed plywood top and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Head board including 15mm wide 6mm thick teak wood round beeding providing for both side of head board and 35mm wide 4mm thick teak wood beeding for top of head board and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable plywood from Foot board of Bed plywood and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Foot board including 15mm wide 6mm thick teak wood beeding providing both side of Foot board and 35mm wide 4mm thick teak wood beeding for top of the head board and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable long rail from Bed plywood top and S & F new long rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable centre rail from Bed plywood top and S & F new centre rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.

S & F triangular shape corner bracket size 75X 75mm long and 25mm thick made out of 1st class teak wood to be fixed to legs to long rail of bed plywood top with 50mm wood screw 2 Nos for each bkt and all as directed by Engr-in-Charge.

M & L for removing old unserviceable/ wornout existing plywood top from Bed plywood top and S & F new 12mm thick plywood BWR grade Type AA of size 1940 X 915mm approved make and fixing it by minimum 18 Nos 30mm brass screw for each bed and all as specified and as directed by Engr-in-Charge.

M & L for polishing of bed plywood top with french polish for obtaining glossy finish including preparation of wooden surfaces by scrapping with sand paper & apply putty whereever required and as directedby Engr-in-Charge.

Repair to Chair Dinning FD-69/228, 279 including

M&L for removing unserviceable plastic cane and providing new plastic cane of 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description (weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .

S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW leg stiffner as per drg Including taking down stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW back stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F triangular bracket 60x60x25 mm as per drg.

Removing unserviceable canning Patti of any side and S&F new canning Patti as per existing and asper drg.

S&F Nylon Buffers shoes fixed in repairs.

Repair to Chair Dinning FD-69/228, 279 PVC Seat

Removing old seat and S&F PVC Seat as per drg.

S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW leg stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW rail as per drg Including taking down rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW back stiffner as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.

S&F triangular bracket 60x60x25 mm, fixed in repairs as per drg.

S&F Nylon Buffers shoes fixed in repairs.

Repair to Chair Writing FD-280 /250/20

M&L for removing unserviceable plastic cane and providing new plastic cane of 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description (weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .

S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW leg stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW back stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW armrest as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.

Removing unserviceable canning Patti from any side and S&F new canning Patti as per existing and asper drg.

S&F 1st cl HW triangular bracket 60x60x25 mm as per drg, fixed in repair

S&F Nylon Buffers shoes fixed in repairs.

Repair to Chair Easy FD-229/17

M&L for removing unserviceable plastic cane from Seat and Back and providing new plastic cane of 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description (weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg. Taking down old can for seat and back and S&F nylon Canning as per drg.

S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW front / rear rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW back frame rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW side rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW armrest as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.

Removing unserviceable canning Patti and S&F new canning Patti as per existing and as per drg.

S&F triangular bracket 60x60x25 mm, fixed in repairs as per drg.

S&F Nylon Buffers shoes fixed in repairs.

Repair to Chair WBB or BKB w/o arms FD-56, FD-285

Removing old seat and S&F new PLY Seat as per drg.

S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW leg stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW rail as per drg Including taking down rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW back stiffner as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.

g) S&F triangular bracket 60x60x25 mm, fixed in repairs as per drg.

S&F Nylon Buffers shoes fixed in repairs.

REPAIRS TO CHAIR DINNING OFFICER (DRG NO FD/MAP-II/04 AND FD/06/MAP-10) M&L for removing unserviceable/broken part and S&F new part made out of 1st class hard wood teak (Teak wood) duly shaped as per drg included tightening the joints by pinning,screwing ,nailing glueing and placing every part intact all as specified in drg and Engr-in-Charge and as shown on drg.

Front leg as specified in the drawing

Rear leg as specified in the drawing

Stiffeners as specified in the drawing

Front/back/ side rail as specified in the drawing

S&F New Cushion 75mm thick 40 density with fabric fixed in repair on seat of 12mm thick ply of approved colour and quality

Back support as specified in the drg

S&F 1 class HW stopper 75x75x75mm as per drg fixed in repair

S&F new hard PVC shoe with screw & washer complete all as specified.

REPAIRS TO CHAIR DINNING OFFICER (DRG NO CWE()/FD/0611 M&L for removing unserviceable/broken part and S&F new part made out of 1st class hard wood teak (Teak wood )duly shaped as per drg included tightening the joints by pinning,screwing ,nailing glueing and placing every part intact all as specified in drg and Engr-in-Charge and as shown on drg.

Front leg as specified in the drawing

Rear leg as specified in the drawing

Front/back/ side rail as specified in the drawing

S&F New Cushion 75mm thick 40 density with fabric fixed in repair on seat of 12mm thick ply of approved colour and quality

Back support as specified in the drg

S&F 1 class HW stopper 75x75x75mm as per drg fixed in repair

S&F new hard PVC shoe with screw & washer complete all as specified.

Repair to Bin Linen Mulitpurpose : FD-2E6/MAP/09

Replacement of unserviceable veneer back ply with new veneer plywood BWR grade 6 mm thick as shown in drg all as specified and as directed.

Replacement of door shutter as shown in drg all as specified and as directed.

S&F 1 st class HW drawer as per drg Including taking down old drawer complete all as specified and as directed by Engineer-in-Charge.

Top with 18/19mm thick ply wood with 1.5mm thick lamination of approved shade with TW beeding as per drg.

S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

Repair to Side Board : FD-241/371 /26(M)/MAP

Replacement of unserviceable veneer back ply with new veneer plywood BWR grade 6 mm thick as shown in drg all as specified and as directed.

Replacement of door shutter as shown in drg all as specified and as directed.

S&F 1 st class HW drawer as per drg Including taking down old drawer complete all as specified and as directed by Engineer-in-Charge.

Top with 18/19mm thick ply wood with 1.5mm thick lamination of approved shade with TW beeding as per drg.

S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Allumandle as per drg.complete all as specified and as directed by Engineer-in-Charge.

Repair to Sofa set 4 seater with Arms Drg No. FD-258, 281, 373

M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

S&F 1 st class HW front / rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

Replacement of U/S 1 st class HW Batten of seat and back as per Drg.

Replacement of U/S 1 st class HW Arms as per Drg.

f) Replacement of U/S 1 st class HW front/rear/side rail of single seater of as per Drg.

S&F Nylon Buffers shoes fixed in repairs.

Repair to Sofa set 5 seater with Arms Drg No. FD-258, 281, 373,CWE(B)FD/0607

M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

S&F 1 st class HW front / rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

Replacement of U/S 1 st class HW Batten of seat and back as per Drg.

Replacement of U/S 1 st class HW Arms as per Drg.

f) Replacement of U/S 1 st class HW front/rear/side rail of single seater of as per Drg.

g) Replacement of U/S 1 st class HW front/rear rail of 3 seater of as per Drg.

h) Replacement of U/S side rail of 3 seater of as per Drg.

S&F Nylon Buffers shoes fixed in repairs.

Repair to Sofa Chair Single seater with Arms Drg No. 281,

M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

S&F 1 st class HW front / rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

Replacement of U/S 1 st class HW Batten of seat and back as per Drg.

Replacement of U/S 1 st class HW Arms as per Drg.

f) Replacement of U/S 1 st class HW front/rear/side rail of single seater of as per Drg.

S&F Nylon Buffers shoes fixed in repairs.

Repair to Rack side Three spaces wooden WDE 27

S&F 1 st class HW Three Tray per drg Including taking down old Tray complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW shelf per drg Including taking down old Shelf complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class hw Rear Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class hw Front Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

Repair to Hat Stand with Mirror FD-233, 288

S&F Mirror shall be of 6 mm thick approved quality , including taking down old mirror all as specified and as directed by Engineer-in-Charge.

Taking down old back ply and S&F 4mm thick commercial plywood all as specified and as directed

Taking down old front ply and S&F 4mm thick commercial plywood all as specified and as directed

Taking down old peg and S&F new pegs all as specified and as directed

Taking down old key hole and S&F new key hole all as specified and as directed

Replacement of unserviceable veneer ply of i.e s, front Hat Stand S&F with new veneer plywood BWR grade 4 mm thick as shown in drg all as specified and as directed.

REPAIRS TO BED PLYWOOD TOP DOUBLE BED CWE/FD/0612

M & L for removing unserviceable / broken leg from bed plywood top and S & F new leg made out of 1st class teak wood and made to shape and all as shown on drg and as directed by Engr-in-Charge.

M & L for removing unserviceable plywood from Head board of Bed plywood top and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Head board including 15mm wide 6mm thick teak wood round beeding providing for both side of head board and 35mm wide 4mm thick teak wood beeding for top of head board and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable plywood from Foot board of Bed plywood and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Foot board including 15mm wide 6mm thick teak wood beeding providing both side of Foot board and 35mm wide 4mm thick teak wood beeding for top of the head board and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable long rail from Bed plywood top Double Bed and S & F new long rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable centre rail from Bed plywood top and S & F new centre rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.

S & F triangular shape corner bracket size 75X 75mm long and 25mm thick made out of 1st class teak wood to be fixed to legs to long rail of bed plywood top with 50mm wood screw 2 Nos for each bkt and all as directed by Engr-in-Charge.

M & L for removing old unserviceable/ wornout existing plywood top from Bed plywood top and S & F new 12mm thick plywood BWR grade Type AA of size 1940 X 915mm approved make and fixing it by minimum 18 Nos 30mm brass screw for each bed and all as specified and as directed by Engr-in-Charge.

Repair to Table Dining 8 Persons 1800x900mm : CWE/IB/FD/0604

S& F Top with 18/19mm prelaminated board Extrior Gde bothe side laminated as per approved shade of dark wallnut in high glos with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.

S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW Triangular wooden bracket 100X100X20mm thick as per drg Including taking down old part all as specified and as directed by Engineer-in-Charge.

S&F new hard PVC shoe with screw & washer complete all as specified.

Repair to Stool Dressing CB FD-DB 6115 FD 27,252/282 including

M&L for removing unserviceable plastic cane and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .

S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW leg stiffner as per drg Including taking down stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW back stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F triangular bracket 60x60x25 mm as per drg.

Removing unserviceable canning Patti of any side and S&F new canning Patti as per existing and asper drg.

S&F Nylon Buffers shoes fixed in repairs.

REPAIR TO TABLE DRESSING LADIES FD FD-251/378/278 Taking down old UNSV existing parts of table dressing ladies and replacement of the same with S&F of new parts made to shape fixed in position all as shown on drg :-

Replacement of top of table dressing ladies, Top shall be of 19mm thick commercial particle board over which 1.5mm thick plastic laminated sheet is fixed all as specified and directed by Engineer-in-Charge.

-do- but sides of 19mm thick teak wood plank

-do- but bottom of 19mm thick teak veneer face on one side other side commercial particle board all as specified and directed by Engineer-in-Charge.

-do- but mirror of size 355x1220mm and 5.5mm thick make Modi Guard/Atul

-do- but leg of size 150x45x45mm

.-do- Back shall be 12mm thick particle board with commercial ply on both side.

.-do- but sliding glass shutter with wheel.

side and back of drawer shall be of 12mm thick teak wook plank. Bottom of drawer shall be of 6mm thick commercial plywood. Front of drawer shall be 19mm thick particle board over which 1.5mm thick plastic laminated sheet is fixed 3mm thick teak wood edging shall be provided to all sides, front and edges of drawers, Teak wood vertical support out of 45mmx45mm provided the back of mirror all as specified and directed by Engineer-in-Charge.

REPAIR TO TABLE DRESSING GENTS Fd 07-04-2023 Taking sown old UNSV existing parts of table dressing Gents and replacement of the same with S&F of new parts made to shape fixed in position all as shown on drg :-

Replacement of top shown on drg all as specified and directed by Engineer-in-Charge.

-do- but sides of 12mm thick particle board all as specified and directed by Engineer-in-Charge.

-do- but bottom of 12mm thick teak veneer face on one side other side commercial particle board all as specified and directed by Engineer-in-Charge

-do- but mirror of size 410x790 and 5.5mm thick make Modi Guard/Atul, all as specified and directed by Engineer-in-Charge.

One nob of aluminium anodized shall be provided to each drawer all as specified and directed by Engineer-in-Charge.

REPAIRS TO TABLE CENTRE TWO TIER CWE B/FD/613

Taking out old unserviceable top and S&F new top (for table Top )of pre-laminated particle board 18/19 mm thick exterior grade as per approved shade make NOVAPAN/ARCHID LAM/KIT LAM ISI marked of existing size and 4 mm thick teak wood edging all around for table top complete all as specified directed by Engineer-in-Charge.

Taking out old unserviceable top and S&F new top (for table bottom) of pre-laminated particle board 18/19 mm thick exterior grade make NOVAPAN/ARCHID LAM/KIT LAM ISI marked of existing size and 4 mm thick teak wood edging all around for table top complete all as specified directed by Engineer-in-Charge.

Taking out old unserviceable broken long rails and S&F new long rails of 1st class teak wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

Taking out old unserviceable broken short rails and S&F new short rails of 1st class hard wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

S&F new hard PVC shoe with screw & washer complete all as specified.

Repair to trestle Store Room Wooden of size 2440x 1220x6mm

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted and applying two or more coat of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge for the following items

Tigheting of loose joints in tops, legs and bracing of trestle store room wooden

REPAIRS TO Desk FD

Removing of old unserviceable top of Desk STA of size 1220mmx530mm and 170mm high in front and 220mm high at back. The back od desk shall be 6mm thick MDF board of 6mm thick pre-laminated particle board with teak veneer shade as directed by Engineer-in-Charge.

Removing of unserviceable short stiffeners 380mm long joining and legs in short side at 100mm from bottom of legs and shall be provided of 25mm dia mil steel tube of 1.6mm wall thickness all as directed by Engineer-in-Charge.

Repair to Stool Dressing with cushioned ,

M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

POLISHING OF WOODEN FURNITURE:- M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted and applying minimum two coat or more of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge for the following items :-

Table 3'X2' /900x600x760mm with drawer FD-231/223/234/284

Table 3'X2' /900x600x760mm without drawer FD-231/223/234/284

Table dining 8 pers FD-273/376/ 1115

Table dining 6 pers FD-273 /1115/274

Table office officer wooden WDF-2973

Table 3'x3'/900x900x760mm FD-88/291

Table writing/writing med FD-275/249/151

Table Dinning Ors wooden

Chair Dining (FD-269/279/228)

Chair Dining PVC Seat

Chair Writing FD-280/261

Chair Easy FD-229/17(M)/201

Chair Dinning officer

Chair WBB or BKB w/o arms FD-56, FD-285

Chair Barber Adjustable

Desk Fd-107

Desk with dias wooden FD-399

Peg table FD-25/277/384

Table dressing Gents with mirror FD-230`/291/294

Teapoy FD-382/237/278/387

Table centreFD-274 /29(M)/235/375

Table Office clerk wooden DB-120

Sofa Set 5 seater FD-281,FD/MAP/II/02

Sofa set 4 seater FD-281

Sofa Chair single seater FD-281

Stool Dressing CB FD-DB 6115 FD 27,252/282

Table Dining 8 Persons 1800x900mm : CWE/IB/FD/0604

Table Dining 6 Persons 1800x900mm : CWE/IB/FD/0605

Rack Rifle wooden

Table Dinning Ors wooden

Bed Plywood Top Double Bed

Almirah Large Wooden

Almirah Med Wooden

Almirah Med Wooden 1/2H and 1/2S

Hat Stand with Mirror FD-233, 288

Rack side Three spaces wooden WDE 27

Rack Map Wooden FD2M

Rack Letter FD-80

Rack Laundry FD-85 FD-87

Rack Stores/Record of size 7'6"x5'6"

Stool 2' height wooden

Table 12'x3' w/o Drawer

Rack for Record 6'x2'x6'

SK INDUSTRIES (BID ID -3160924)

Dhangot Brothers (BID ID -3152482)

Anilenterprise (BID ID -3155648)