Construction of Assistant Engineer (Horticulture) Office-cum-Residence building at Pandoh Tehsil Sadar District Mandi (H.P.)

Amount

Excavation in foundation, trenches, etcetera in earth work in all kinds of classification, of soils such as pick work, jumper work, blasting work saturated soils including chiseling or any other mixed variety of soils, dewatering and / or removal of slush and other incidentals, lift up to any height stacking excavated soil up to all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetre) thick layer when required into plinths, sides of foundation etcetera consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth to the disposal point within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Excavation in drains channles etcetra in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseling or any other mixed variety of soil, lift up to any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge, within all leads, lifts of materials and other incidentals.

Providing form work with steel plates 3.15mm (three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling upto all height and removal of the same for in-situ reinforced concrete and plain concrete work in :

Flat surface such as soffits of suspended floors, roofs, landings and the like upto any thickness including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Columns, pillars, posts and struts square, rectangular or polygonal in plan including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Beam, cantilever, girders and lintels, sides and soffits of beams beam haunching cantilevers girders bressumers and lintels of any depth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Edges of slabs and breaks in floors and walls of any width including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and laying cement concrete 1:4:8 ( one cement : four sand : eight graded, crushed stone aggregate 40mm (forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and laying cement concrete 1:6:12 ( one cement : six sand : twelve graded, crushed stone aggregate 40mm (forty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and laying design mix M-20 (twenty) grade of cement concrete mechanically mixed and vibrated with minimum cement contents of 320 Kg/cum (three hundred twenty kilogram per cubic metre) with graded, crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:

Walls any thickness but not less than 0.10mtrs. (zero point one zero metre) thickness including attached pilasters, buttresses plinth and string courses upto any depth /any height including curing complete and carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Suspended floor, roofs, landing and shelves and their support balconies beams girders, bressumers and cantilevers upto all floor level including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Columns, pillars, posts and struts upto floor all level including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and laying reinforced cement concrete design mix M-25 (twenty five) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work. The mix shall be designed as per requirement of I.S. code and P.W.D. specification. The dedign mix shall be got approved from the Engineer-in-Charge prior to casting. The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S. code.

Walls any thickness but not less than 0.10mtrs. (zero point one zero metre) thickness including attached pilasters, buttresses plinth and string courses upto any depth /any height including curing complete and carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Suspended floor, roofs, landing and shelves and their support balconies beams girders, bressumers and cantilevers upto all floor level including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing Tor steel reinforcement for RCC work including bending binding and placing in position including cost of binding wire complete in all floors including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Second class brick work using common burnt clay building bricks of approved kiln in foundation and super structure above plinth level upto floor all level in cement mortar 1:6 (one cement : six sand) including curing complete and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Second class half brick masonry in common burnt clay building bricks in superstructure cement mortar 1:4 (one cement : four sand) and curing complete and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Square rubble masonry coursed with hard stone of approved quality/quarry in foundation and plinth including racking out joints in cement mortar 1:6 (one cement : six sand) and curing complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Square rubble masonry coursed with hard stone of approved quality/quarry in super structure above plinth level upto all floor level including racking out joints in cement mortar 1:6 (one cement : six sand) curing complete and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position second class deodar wood including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood panelled glazed or panelled and glazed shutter for doors, windows and clere story windows including black enamelled iron butt hinges with necessary screws including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85g (Eighty five) gauge with wire of diameter 0.56mm (zero point five six millimeter) for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 12mm (twelve millimetre) thick prelaminated board both side bwp phenol bounded exterior/interior grade shutters with frame of first class deodar wood for cup board including nickal plated bright finished piano hinges 25mm (twenty five millimetre) thick frame including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 19mm (nineteen millimetre) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails and screw etcetra complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing 40x3mm (forty into three millimetre) flat iron hold fast 40cm (forty centimetre) long including fixing to frame with 10mm (ten millimetre) diametre bolts, nuts and wooden plugs and embeding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimetre) 1:3:6 (one cement : three sand : six graded/crushed crushed stone aggregate 20mm (twenty millimetre) nominal size) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing M.S. Plain grill of required pattern in wooden frames of windows etcetra in M.S. flat square or round bars with round headed bolts and nuts or by screws including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

250x16mm (Two hundred fifty into sixteen millimeter)

Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

250x10mm (Two hundred fifty into ten millimeter)

150x10mm (One hundred fifty into ten millimeter)

Providing and fixing mat finish aluminium handles anodized transparent or dyed to required shade and colour with necessary screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

125mm (One hundred twenty five millimetre)

100mm (One hundred millimetre)

Providing and fixing 100mm (one hundred millimetre) bright finished brass floor door stopper with rubber cushion screws etcetera to suit shutter thickness including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 150mm (one hundred fifty millimetre) M.S. single acting spring hinges bright finished with necessary screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 150mm (one hundred fifty millimetre) M.S. double acting spring hinges bright finished with necessary screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 25mm (twenty five millimetre) diametre brass curtain rail with rollers stop ends and brackets in pelmets with necessary screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 6mm (six millimetre) thick cement bounded partical board ceiling of approved quality butt jointing and nail (frame work and cover fillets to be paid for seperately) complete in all respect including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

White glazed tiles 6mm (six millimetre) thick in flooring, treads of steps and landing laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry complete upto all floor level in all respect including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

White glazed tiles 6mm (six millimetre) thick in skirting riser of steps and dado 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry complete upto all floor level in all respect including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 10 mm (ten millimetre) thick antiskid water proof stain and impect resistent heavy duty vetrified tiles of approved specification/make/ brand 600x600mm (six hundred into six hundred millimetre) matt finish manufactured of approved shade and colour in flooring, treads of steps and landing laid on a bed of 12mm (twelve millimetre) thick cement mortor 1:3 (one cement :three sand ) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per spacification including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 8mm (eight millimetre) thick Duro stone vetrified tiles 300x300 mm (three hundred into three hundred millimetre) with matt finish in skirting 10mm (ten millimetre) (average) thickness base of 12mm (twalve millimetre) thick cement mortar 1:3 (one cement : three sand) laid over jointed with gray cement slurry mixed with pigment to match the shade in all floor of tiles as required complete as per specification including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and laying marble works (table rubbed and polished) in flooring 20mm (twenty millimetre) thick base in cement mortar 1:3 (one cement : three sand) including jointing with cement mortar 1:2 (one white cement : two marble dust) with an admixture of pigment to match the shade of the marble 20mm (twenty millimetre) thick white makrana marble upto all floor level as per design and drawing as approved by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental charges complete in all respect

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-Charge complete as per specification including carriage of material within all leads, lifts and other incidental charges.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental charges.

Providing and fixing valley 90cm (ninety centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental charges.

Providing and fixing 0.63mm (zero point six three millimetre) thick 15cm (fifteen centimetre) wide and 45cm (forty five centimetre) overall semicircular plain galvanised iron sheet gutter with iron brackets 40x3mm (forty into three millimetre) size bolts and nuts and washers etcetera including making necessary connection with rain water pipe complete as per design including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 100mm (one hundred millimetre) diametre pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5kg/sqm (four point five kilogram per square metre) including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

PVC plain bend 100mm (one hundred millimetre) diametre.

Providing and fixing MS BP sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid seprately) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting fixing in position and applying a priming coat of red lead paint:-

In gratings, framed guard, bars, ladders, railings, brackets and similar works complete and carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

In trusses and trussed purlins in buildings complete as per drawing, design and carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm (fifty millimetre) diametre welded in straight length over M.S. flat at top of vertical ballusters including one coat of red oxide priming coat complete (M.S. flat & ballusters of railing shall be measured & paid separately ) as per specifications and design including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Applying Birla White wall care putty over plaster surface after thoroughly brushing the suface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the suface complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel white white paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Painting two coats (excluding priming coat) on new wood and wood based surfaces, with ready mixed paint other than white to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including carriage of materials within all leads and lifts complete in all respect.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt and other foreign matter etcetera including sand paper smooth complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:4 (one cement : four sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior/exterior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including complete carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for making the surface complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (forty millimetre) nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand : six graded, crushed crushed stone aggregate 20mm (twenty millimetre) nominal size including finishing the top surface of concrete smooth including curing complete and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Constructing course rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying 10cm (ten centimetre) cement concrete in 1:5:10 (one cement : five sand : ten graded, crushed stone aggregate of 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded, crushed stone aggregate of 20mm (twenty millimetre nominal size) and finished with a floating coat of neat cement complete as per standard design including curing and carriage of material with in all leads, lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Water Supply and Sanitary Installation:- Providing and laying in trenches ISI marked galvanized mild steel tubes (medium grade) tube fitting of approved brand and manufacture (earth work in trenches to be measured and paid for separately) complete in all respect as per H.P.P.W.D. specifications including carriage of material with in all leads, lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

15mm (fifteen millimeter) nominal bore

20mm (twenty millimeter) nominal bore

Providing and fixing Vitreous China wash down, water closet (European type W.C. pan) with integral “P” or “S” trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement :one sand) (seat and cover to be measured and paid for separately) Anglo Indian Universal Closet complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing PTMT Coloured/ white high density polyethylene / poly propylene 10 (ten) litres capacity (full flush) European standard control low level flushing cistern with fitting with a pair of brackets with fittings such as lead valve syphon, 15mm (fifteen millimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (forty millimetre) diametre C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing Solid Type white plastic sheet and cover for wash down water closet with C.P. brass hinges and rubber buffers including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing flat back 550x400mm (five hundred fifty into four hundred millimeter) vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings complete including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing vitreous china padestal of approved specification/make for wash basin completerecessed at the back for the reception of pipe and fitting including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 32mm (thirty two millimetre) diametre rubber plug of approved specification/make for wash basin or sink complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 32mm (thirty two millimetre) diametre C.P.brass waste of approved specification/make for wash basin or sink complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 32mm (thirty two millimetre) diametre M.I. union of approved specification/make for wash basin or sink complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 32mm (thirty two millimetre) diametre C.P.brass S- trap of approved specification/make for wash basin or sink complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 100mm (one hundred millimetre) sand cast iron gratting for gully, floor or Nahni trap of approved specification/make complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 600mmx450mm (six hundred in to four hundred fiftymilimetre ) bevelled edge mirror of superior glass mounted on 6mm (six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washer, complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing PTMT soap dish with holder of approved quality and other with steel screws and rawal plugs including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 15mm (fifteen millimetre) diametre C.P.brass bib tap heavy duty with capstan head including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 15mm (fifteen millimetre) diametre C.P. brass pillars tap heavy duty capstan head including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 15mm (fifteen millimetre) diametre C.P. stop cocks heavy duty including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing PVC connection pipe with brass unions 45cm (forty five centimeter) long 15mm (fifteen millimeter) nominal bore complete in all respect including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing brass full way valve with wheel complete in all respect including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

15mm (fifteen millimeter) nominal bore

Providing and fixing PTMT jet spray of approved quality and colour with 1.00 mtr. (one point zero zero metre) tube complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing PTMT 450mm (four hundred fifty millimetre) toilet rail of approved quality and colour with steel screws and rawal plugs including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing PTMT toilet paper holder of approved quality and colour with steel screws and rawal plugs including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing PTMT grating 100mm (one hundred millimetre) nominal diameter round of approved quality and colour complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing PTMT sink mixture of approved quality and colour complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing PTMT wall mixture of approved quality and colour complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipe ISI marked including jointing with approved adhesive etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

75mm (seventy five millimeter) nominal size

100mm (one hundred millimeter) nominal size

Providing and fixing PVC single equal branch with ovel access door, ISI marked insertion rubber washer 3mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

75mm (seventy five millimetre) diametre.

110mm (one hundred ten millimetre) diametre.

Providing and fixing PVC double equal branch with oval acess door ISI marked, insertion rubber washer 3mm (three millimetre) thick, bolts and nuts complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

75mm (seventy five millimetre) diametre.

110mm (one hundred ten millimetre) diametre.

Providing and fixing 610 x 460 x 200 mm ( six hundred ten into four hundred sixty into two hundred millimetre) deep of approved standred ISI make with frain board and C.P. waste with C.I. or M.S. Brackets plain white including cutting hole in walls and making good the same but excluding fitting including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etcetera complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

75mm (seventy five millimetre) diametre.

110mm (one hundred ten millimetre) diametre.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

75mm (seventy five millimetre) diametre.

110mm (one hundred ten millimetre) diametre.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawl plugs etcetera complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

75mm (seventy five millimetre) diametre.

110mm (one hundred ten millimetre) diametre.

Providing and fixing PVC 1000 (one thousand) litres net capacity water storage tank of ISI: 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level and including carriage of material with in all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing polythelene aluminium polythene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black conforming to IS: 15450-2004 for water supply including clamps at one metre spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge.

1216 (one thousand two hundred sixteen) (16 mm (sixteen millimetre) OD) pipe

1620 (one thousand six hundred twenty) (20 mm (twenty millimetre) OD) pipe

Providing and fixing Equal Tee composite end seal compression fittings as per IS 15450-2004 for cold water supply for example tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fittings complete including cutting and making good the wall etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

1216mm (one thousand two hundred sixteen millimetre)

1620mm (one thousand six hundred twenty millimetre)

Providing and fixing Female Elbow composite and seal compression fittings as per IS 15450-2004 for cold water supply for example tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fixing complete including cuting and making good the wall etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

1216 x15mm (one thousand two hundred sixteen into fifteen millimetre)

1620 x20mm thread (one thousandsix hundred twenty into twenty millimetre)

Providing and fixing Couplers composite end seal compression fittings as per IS 15450-2004 for cold water supply for example tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fixing complete including cutting and making good the wall etcetera including carriage of materials within all leads and lifts complete in all respectas per direction and satisfaction of Engineer-in-Charge.

1216mm (one thousand two hundred sixteen millimetre)

1620mm (one thousand six hundred twenty millimetre)

Providing and fixing white vitreous china wall pattern urinal flat back type size 430mm x260mm x 350mm (four hundred thirty millimetre into two hundred sixty millimetre into three hundred fifty millimetre) of approved specification/make including connection the urinal with waste pipe by means of white lead mixed with chopped hemp(waste pipe to be measured and paid for separately) including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing Vitreous China 5 litre (five litres) capacity automatic flushing cistern of approved specification/make with a pair of C.I. or M.S. brackets complete with fittings including C.I. syphonic apparatus, mosquito proof lid, and C.P. brass unions and coupling for connection with inlet, out let and over flow pipe including cutting holes and making good the same (over flow pipe to be measured and paid for separately) complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Construction chamber 300mmx300mmx500mm (three hundred millimetre into three hundred millimetre into five hundred millimetre) inside size for stop cock with C.I. surface bed 100x100 x75mm ( one hundred into one hundred into seventy five millimetre) in side with weight cover fixed collection of water in cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) 75mm (seventy five millimetre) thick foundation concrete 1:5:10 (one cement :five sand : ten graded, crushed stone aggregate 40 mm (forty millimetre) nominal size) inside plastering 15mm (fifteen millimetre) thick with cement mortar 1:3 (one cement : three sand ) finished smooth with a floating coat of neat cement including curing complete with 100mm (one hundred millimetre)cast in situ plain cement concrete walls in 1:2:4mix (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) complete including form work and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Constructing man hole with RCC top slab in 1:2:4 mix (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) foundation concrete 1:4:8 (One cement : four sand : eight graded crushed stone aggregate 40mm (forty millimetre) nominal size) in side plastering 15mm (fifteen millimetre ) thick with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) finished smooth complete including curing and testing inside size 800 x 800mm (eight hundred into eight hundred millimetre) and 500mm(five hundred millimetre) deep including CI cover with frame (light duty single seal pattern-I) 455 x 610mm (four hundred fifty five into six hundred ten millimetre) internal dimension total weight of cover and frame to be not less than 38Kg. (Thirty eight kilogrmme) (weight of cover 23Kg. (twenty three kilogramme) and weight of frame 15Kg. (fifteen Kilogramme)) with 300mm (Three hundred millimetre) thick wall of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement : three sand) as per HP.PWD. specification and as directed by the Engineer-in-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Supplying and fixing cast iron cover without frame for man holes for frames of 500mm ( five hundred millimetre) internal diametre C.I. cover (medium duty) the weight of cover to be not less than 58Kg (fifty eight kilogram) complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

ANIL KUMAR

Balwant SIngh Thakur

KHEM CHAND