Providing, Installation, Testing and Commissioning of Split Type Air Conditioning System and Water Cooler at Tripura State Guest House during the year 2024 25

Amount

Providing star rated (Minimum 3 star with applicable ISEER according to current industry standard) high wall split /window type AC machine (Condenser & evaporator coil pipe should be made of copper) of approved make and technical specification with hermetically sealed compressor operating on non CFC refrigerant, pipe as supplied with AC machine, necessary plug top for IDU (With 01 year overall machine and compressor warranty) suitable for wall mounting conforming to IS (Part-II) specification (Except power consumption) suitable for operation on 230 volt, 50 Hz, single phase AC supply capable of performing a) Cooling b) Dehumidifying c) Air circulating d) Filtering having rated cooling capacity

2.0 TR split type high wall AC machine (rated cooling capacity should not be less than 6000 Kcal/hr or 24000 BThu/hr or 7000 watt)

Providing floor mounting vertical type split AC machine (Condenser & evaporator coil pipe should be made of copper) of approved make and technical specification with hermetically sealed compressor operating on non CFC refrigerant, pipe as supplied with AC machine, necessary plug top for IDU (With 01 year overall machine and compressor warranty) suitable for wall/ceiling mounting conforming to IS (Part-II) specification (Except power consumption) suitable for operation on 420 volt, 50 Hz, three phase AC supply capable of performing a) Cooling b) Dehumidifying c) Air circulating d) Filtering having rated cooling capacity

4.0 TR floor mounting vertical type split AC machine (rated cooling capacity should not be less than 12000 Kcal/hr or 48000 BThu/hr or 14000 watt)

Standard installation, testing and commissioning of 1.0/1.5/2.0 TR split and window type machine including hole cutting, finishing etc as per direction of the Engineer-in-charge.

Standard installation, testing and commissioning of 3.0/4.0 TR floor mounting vertical split type AC machine including hole cutting, finishing etc as per direction of the Engineer-in-charge.

Fabrication of M.S platform for placement of condensing unit by using M.S angle of (65x65x5) or (50x50x5) mm size base plate, nuts and bolts/ universal bracket (GSS) for ODU of split type ACs including all accessories for onsite installation i/c painting, fitting, fixing, grouting by cement mixture as per direction of the Engineer-in-charge.

Supply, installation of additional length of copper pipe beyond 10 ft length of 5/8”, 3/8", 3/4" 1/2" and 1/4” diameter for both suction and liquid line with insulation and necessary wiring between indoor and outdoor units.

Providing hard PVC pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-charge.

Providing, installation, testing and commissioning of water cooler 150Lt/hr Cooling and storage capacity - 150 L, conforming to IS 1475 Part 1 (Latest), suitable for operation on 230 v ± 10%, 50 hz single phase AC supply, thermal insulation for storage tank-PUF or higher grade to keep the water cool for longer period., number of faucets- 2, storage tank and drain tray material -SS 304 or higher grade, outer body material- panel: SS 304 or higher grade and rest CRCA powder coated steel or higher grade, faucet material-Brass (Cr plated) or higher grade, auto cut-out, voltage overload compressor protection, provided & fitted with water tank level switch inside water cooler to switch off the purifier on attaining the desired level of water inside water tank of water cooler, all conforming to mentioned standards & other Indian standards covering the product, and with all type of water pipe fittings & accessories etc complete. The product shall be manufacturer's standard tested latest model being in successful use in market for at least last 3 (three) years.

R.P.ELECTRONICS (BID ID -146734)