Renovation of Middle School Langate

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 2.7.1 All kinds of soil :

12mm thick Cement Plaster on rough side of single or half brick wall of mix 1:6 Mix.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and hades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1

Providing & fixing panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISImarked black enamelled M.S Butt hingeswith necessary screws 35 mm thick imported wood incl 3.5mm thick glass panes with all necessary accessories complete and 12 mm thick both side decorated ply board for doors includin coat of priemier ,including hardware iteams ,handles,tower bolt etc. complete job

Providing wood work in celling frames as a base for fixing of celling PLY/ HDHWR/HDHMR of , fixed in position imported KD wood .including nails secrews all hardware iteams complete job as directed by engineer incharge.

Brick work with F.P.S bricks of class designation 75 in foundation & Plinth in cement mortar in 1:6 (1 cement: 6 coarse sand)

Applying 2mm thick wall putty on wall surface for smooth finish (two or more coats) including head load & carriage

P/L of Stone Solling duly hand packed including watering dresssing and ramming with all l carriages loading unloading and staking etc complete.

Providing/laying in position specified grade excluding the cost of centering & shuttering – All work upto plinth level. 1:3:6 crushed stone aggregate 20mm nominal size-

Providing and fixing Extra 3.5mm float glass pans for doors, windows and clerestory windows frames of approved brand.

Painting with synthetic enamel paint of approved brand and manufacture in all shade to give even shade on new work (two or more coats)

Providing and fixing of 6 mm thick HDHWR/HDHMR one side Laminated (OSL) board in ceiling on existing framework including all fixing accessories,screws,ashesives, cutting wastage, leads and lifts excluding framework,complete job as directed by Engineer incharge.

Providing and applying Acrylic based/oi lbound (Excel) paint of approved make and colour over the external surfaces at all levels inclusive of surface preparation by scrapping the surface and applying with acralyc readymade putty of approved brand as per manufacturer's recommendations, filling cracks with approved crack fill material such as Sunfilla or equivalent, applying sealer or primer coat as recommended by manufacturer and applying two finishing coats, cleaning the floor surface after completion of work etc compete work.

Providing and fixing of CGI sheets 0.50 mm thick including cost of nails and washers