Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.3 LAccepted-AOC | ₹23.3 L | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹23.3 LRejected-Finance 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | ₹23.3 L | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 3 | L3₹27.8 LRejected-Finance 303 GHS 88 SECTOR 20 PANCHKULA 134113 HARYANA | PANCHKULA | HARYANA | 134113 | ₹27.8 L | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| Sl No | Description | Qty | Unit | M/s Guddu Builders L1 | R D Bansal L3 | KULWANT SINGH L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supply, installing, testing and commissioning of submersible pump, with S.S Bowl and connected with 100 mm dia column pipe by means of S.S flange and Connecting SS Nipple having diffuser casing construction and impellers dynamically balanced rotor and pump shaft with impeller and motor suitable for operation on 3 phase 415 volts, capacity 30KW/41HP, complete set (Motor and Pump), Pump head Minimum 150 Mtr, discharge range 1000 LPM, including cable guard complete all as specified and directed.
Make : KSB of Motor Type: BPHA 384(HBC413), Pump type: BPHA 384(09M2) or of equivalent in Kirloskar/Crompton Greaves/Waree as approved by GE. | 5 | Each Set | 1,65,000 ₹8.3 L | 2,29,000 ₹11.4 L | 1,82,000 ₹9.1 L |
| 2.00 | Supply, installing, testing and commissioning of submersible pump, with S.S Bowl and connected with 100 mm dia column pipe by means of S.S flange and Connecting SS Nipple having diffuser casing construction and impellers dynamically balanced rotor and pump shaft with impeller and motor suitable for operation on 3 phase 415 volts, capacity 24.50KW/33HP, complete set (Motor and Pump), Pump head Minimum 110 Mtr, discharge range 1000 LPM including cable guard complete all as specified and directed.
Make : KSB of Motor Type: BPHA 384(HBC333), Pump type: BPHA 384(07M1) or of equivalent in Kirloskar/Crompton Greaves/Waree as approved by GE. | 2 | Each Set | 1,50,000 ₹3 L | 2,00,000 ₹4 L | 1,36,000 ₹2.7 L |
| 3.00 | Labour for lifting of column pipe flanged 100mm/80mm bore with and including submersible Motor, pump set of any capacity along with cable from bore hole of tube well, and lowering the same set of accessories after replacement of UNSV Pump set with New Pump set, in borewell and depositing the unsv pump set to AGE E/M-I yard, complete all as specified and directed by Engr-in-Charge.
Note: The following works are shall be deemed to be included in the unit quoted rates:-
(i) Lifting & lowering of pump set upto 120mtrs deep Tube Well.
(ii) Replacement of defective Rubber gasket, nuts & bolts.
(iii) Depositing the unsv pump set to AGE E/M-I yard cost of labour and transporting the pumpset from site to AGE E/M store yard shall be deemed to be included in the quoted rate. | 7 | Each Job | 5,000 ₹35,000 | 9,000 ₹63,000 | 5,000 ₹35,000 |
| 4.00 | S&F flat Submersible Cable, multistranded copper conductor of nominal area 16 sqmm x 3 core, 1100 Volt complete all as specified and directed. | 50 | RM | 500 ₹25,000 | 850 ₹42,500 | 650 ₹32,500 |
| 5.00 | Supply, fixing, testing and commissioning Ductile Iron single chamber double orifice Air release Valve of size 100 mm dia bore, flanged type, float-SS float, conforming to IS 14845 duly drilled holes for fixing of nuts and bolts, complete including rubber gasket, nuts, bolts and washers complete all as specified and directed.
Make: Kartar of Model No: K549 or of equivalent in Zoloto/Leader. | 1 | Each | 7,000 ₹7,000 | 12,550 ₹12,550 | 8,500 ₹8,500 |
| 6.00 | Supply, fixing, testing and commissioning Double flanged non-rising stem type cast iron sluice valve suitable for 100 mm dia bore pipe with hand wheel and suitable for pressure rating of PN :1.6 duly drilled holes for fixing of nuts and bolts, stem made of high tensile brass ISI marked and conforming to IS : 14846, complete including rubber gasket, nuts, bolts and washers complete all as specified and as directed. | 2 | Each | 7,000 ₹14,000 | 8,500 ₹17,000 | 8,500 ₹17,000 |
| 7.00 | M&L for masonry valve pit of size 1050x1050x900mm internal size complete with excavation, earth work and brick work in CM 1:6, 15mm thick plastering in CM 1:4 internally including 3 mm thick MS Sheet cover and angle iron frame of suitable size and two coats of synthetic enamel paint over one coat of red oxide primer complete with locking arrangement complete all as specified and directed. | 2 | Each Job | 5,000 ₹10,000 | 9,000 ₹18,000 | 9,500 ₹19,000 |
| 8.00 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.50 m deep for laying of water pipe lines/taking out pipe lines and getting out in soft/loose of soil including forming bottom surface to required level and slope complete all as specified and as directed.
Note: (i) Excavation work shall be carried out by hand (manually) and no mechanical excavation equipments (such as mechanical excavator or JCBs) shall be permitted.
(ii) During excavation, in the event of any damage to existing water pipes or electric / JFC or OFC (Optical Fiber Cable) cables, the contractor shall be rectified or replaced by at their own expense. | 215.46 | Cum | 120 ₹25,855.20 | 100 ₹21,546 | 100 ₹21,546 |
| 9.00 | Returning filling in including spreading, levelling, watering and well ramming in layer not exceeding 25CM thick in soft/loose soil complete all as specified and directed. | 189.92 | Cum | 30 ₹5,697.60 | 20 ₹3,798.40 | 40 ₹7,596.80 |
| 10.00 | Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. | 25.54 | Cum | 30 ₹766.20 | 30 ₹766.20 | 40 ₹1,021.60 |
Updated dates
Tender Value
₹26.6 L
EMD Value
₹53,100
Closing Date
9 Apr 2026, 6:00 pmClosed
GE AF AMBALA
GE AF AMBALA
PROVN OF PUMPS ALONGWITH CONNECTED SUPPLY LINE AND ADDN/ ALTN TO TOILET AT (AF) STN AMBALA UNDER GE (AF) AMBALA
2026_MES_756064_1
GE AF/AMB-T-85/2025-26
Open Tender
Civil Works
180 days
GE AF AMBALA
ALL AS PER NIT AND TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE AF AMBALA
₹53,100
Yes
27 May 2026
12 Mar 2026
11 Apr 2026
12 Mar 2026
9 Apr 2026
26 Mar 2026
13 Mar 2026 - 19 Mar 2026
Supply, installing, testing and commissioning of submersible pump, with S.S Bowl and connected with 100 mm dia column pipe by means of S.S flange and Connecting SS Nipple having diffuser casing construction and impellers dynamically balanced rotor and pump shaft with impeller and motor suitable for operation on 3 phase 415 volts, capacity 30KW/41HP, complete set (Motor and Pump), Pump head Minimum 150 Mtr, discharge range 1000 LPM, including cable guard complete all as specified and directed. Make : KSB of Motor Type: BPHA 384(HBC413), Pump type: BPHA 384(09M2) or of equivalent in Kirloskar/Crompton Greaves/Waree as approved by GE.
Supply, installing, testing and commissioning of submersible pump, with S.S Bowl and connected with 100 mm dia column pipe by means of S.S flange and Connecting SS Nipple having diffuser casing construction and impellers dynamically balanced rotor and pump shaft with impeller and motor suitable for operation on 3 phase 415 volts, capacity 24.50KW/33HP, complete set (Motor and Pump), Pump head Minimum 110 Mtr, discharge range 1000 LPM including cable guard complete all as specified and directed. Make : KSB of Motor Type: BPHA 384(HBC333), Pump type: BPHA 384(07M1) or of equivalent in Kirloskar/Crompton Greaves/Waree as approved by GE.
S&F flat Submersible Cable, multistranded copper conductor of nominal area 16 sqmm x 3 core, 1100 Volt complete all as specified and directed.
Supply, fixing, testing and commissioning Ductile Iron single chamber double orifice Air release Valve of size 100 mm dia bore, flanged type, float-SS float, conforming to IS 14845 duly drilled holes for fixing of nuts and bolts, complete including rubber gasket, nuts, bolts and washers complete all as specified and directed. Make: Kartar of Model No: K549 or of equivalent in Zoloto/Leader.
Supply, fixing, testing and commissioning Double flanged non-rising stem type cast iron sluice valve suitable for 100 mm dia bore pipe with hand wheel and suitable for pressure rating of PN :1.6 duly drilled holes for fixing of nuts and bolts, stem made of high tensile brass ISI marked and conforming to IS : 14846, complete including rubber gasket, nuts, bolts and washers complete all as specified and as directed.
M&L for masonry valve pit of size 1050x1050x900mm internal size complete with excavation, earth work and brick work in CM 1:6, 15mm thick plastering in CM 1:4 internally including 3 mm thick MS Sheet cover and angle iron frame of suitable size and two coats of synthetic enamel paint over one coat of red oxide primer complete with locking arrangement complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.50 m deep for laying of water pipe lines/taking out pipe lines and getting out in soft/loose of soil including forming bottom surface to required level and slope complete all as specified and as directed. Note: (i) Excavation work shall be carried out by hand (manually) and no mechanical excavation equipments (such as mechanical excavator or JCBs) shall be permitted. (ii) During excavation, in the event of any damage to existing water pipes or electric / JFC or OFC (Optical Fiber Cable) cables, the contractor shall be rectified or replaced by at their own expense.
Returning filling in including spreading, levelling, watering and well ramming in layer not exceeding 25CM thick in soft/loose soil complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Supplying and laying in trenches in replacement of centrifugally cast (spun) ductile iron pipes of 100 mm dia pressure pipes water delivery with spigot & socket end, class 'K-9' conforming to IS:8329/2000 (latest version) - suitable for (push on) rubber gasket jointing with inside cement mortar lining with portland slag cement as per IS 455 ;1989 and external metallic zinc coating as per annex A of IS 8329 withfinishing layer of bitumin coating as per annex C, duly ISI marked in any length including testing and commissioning complete all as specified and as directed by Engineer-In-Charge.
Supply, laying and jointing heavy duty CI/DI Bends (any type, radius and angle ), Tapers any type,( straight, bend, increasing, decreasing or double socket etc), Tee pieces single branch, Y junction, Double branch, Cross (all sockets or socket and spigot or all flanged or one end flanged and other ends spigot /socketed), Collars, Caps and Plugs, MJ collar coupling etc complete and conforming to relevant IS : and upto 100 mm bore complete all as specified and as directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises complete all as specified and as directed.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) jointless area of each tile exceeding 0.11 but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over 15mm thick rendering in CM 1:4 complete all as specified and directed.
Taking up or down steel tubing and connections, for refixing or removal from site for 15mm bore pipe, complete all as specified and directed.
S&F, 15 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors complete all as specified and directed.
S&F in repairs CONCEALED stop cock of 15mm bore reduced body etc complete all as specified and directed.
S&F in repairs angular stop cock of long thread 15mm bore complete all as specified and directed.
S&F in repairs 15mm bore brass chromium plated fancy type hot and cold wall mixture (wall mounted model ) with telephonic shower and telephone fixed complete all as specified and directed.
S&F in repairs, 15 mm bore pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.
S&F in repairs, 15 mm bore Bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs, 15 mm bore Bib taps, fancy type, long body with wall flanges cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs, brass chromium plated fancy type towel ring square fixed etc complete all as specified and directed.
S&F in repairs, brass chromium plated fancy type towel rail 600mm long complete all as specified and directed.
S&F in repairs Toilet paper holder, cast copper alloy, chromium plated fixed in position, complete all as specified and as directed.
S&F in repair Cast copper alloy, chromium plated soap dish, complete all as specified and as directed.
S&F in repair CP grating of size 125mm complete all as directed.
S&F in repair corner self of size 300 x 300 mm made out of 5 to 7mm thick superior quality glass with CP bracket and railing fixed etc complete all as specified and as directed.
S&F in repair single piece vitreous china wash down water closet pedestal pattern white inclding fixing bolts , flushing cistern and flush pipe complete PVC seat cover with aluminium hinges devices & EWC jet chromium plated with 1.00 mtr long PVC connection pipe complete all as specified and directed.
S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories reqd complete all as specified and directed..
S&F in repairs, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete all as specified and as directed.
S&F in repair brass ball/lfloat valve with PVC ball complete suitable for 20mm bore pipe complete all as specified and as directed.
S&F in repairs PVC connection 60cm long with brass check nuts on both sides suitable for 15mm bore pipe etc complete all as specified and directed.
Dismantling old unserviceable RCC/PVC water tank of capacity exceeding 250 but not exceeding 500 ltrs capacity including supply and fixing PVC water storage tank of 500 ltrs capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm GI pipe connection including locking arrangement with ball valves high pressure with epoxy coated aluminium rod and high density plastic ball fixed complete all as specified and directed.
Taking down Chowkats With shutters(without taking of shutters from the frames) or frames exceeding 1.5 Sqm but not exceeding 4 sqm including dismantling of brick work for hold fast and making good the disturbed surface complete all as specified and as directed.
S&F anodised aluminium door made out hollow aluminium section as mentioned below. Each door having 02 Nos disk or D type handle of 200 mm long , two Nos aluminium tower bolts of 200 size , one No mortice lock of six levers with key in duplicate regulated by double action hudrolic floor door spring (Make - Sandhu/Titz) shutters to be panelled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasket anodised aluminium beading screws etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS VERTICLE STYLE : 100 X 44 X 1.60MM SHUTTERS LOCK RAIL : 150 X 44 X 1.60MM SHUTTERS BOTTOM RAIL : 200 X 44 X 1.60MM
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
85TenderPages.pdf
Tender Documents • 0.96 MB
BOQ_846885.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid