REPAIR TO PATH HARD STANDING, PAVER BLOCK, CHEQURED TILES, PLASTERING, BRICK WORK, FENCING AND PERIODICAL SERVICES TO BOUNDARY WALL AT NORTH OF RLY LINE AT MISSAMARI UNDER GE MISSAMARI

Amount

Demolition of brick work or stone masonry built in cement mortar incl all quoins arches pillars etc.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, and complete all as specified and as directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded aggreagte as in coping bed block etc complete all as specified and directed

M & L for rendering in cement mortar (1:4) 15mm thick on concrete /brick masonry wall surfaces, complete as specified and directed. (Note WPC paid separetely)

Supply only Integral water proofing compound

M&L RCC nominal mix Type B1 1:2:4 (20 mm graded aggregate) aggregate) in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses including Demolition of Reinforced cement Concrete of any description and in any position complete all as specified and directed.

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

M&L RCC nominal mix Type B1 1:2:4 (20 mm graded aggregate) aggregate) in columns, pillars, piers, posts, struts and the like; any thickness; above top of footings; including attached pilaster and buttresses including Demolition of Reinforced cement Concrete of any description and in any position complete all as specified and directed.

M&L Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified.

M&L TMT Bars 10mm dia and overcut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.

M & L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer,complete all as specified and as directed.

M&L preparation of old surface of wall and applying one coat of cement base paint

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry, etc.

Dismantling fencing wire mesh, any type all directed by Engineer-In-Charge

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil.

M&L PCC in foundations, filling and mass-concrete type B2 (1:3:6) using 40 mm graded stone aggregate as in foundation concrete of fencing post

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165

Material and Labour for mild steel round bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns, hooking ends and binding with welding for securing chain link fencing etc conforming to Fe-290.Gde-E-165, complete all as specified and directed., complete all as specified.

M&L For applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome

S & F MS screw bolts 5 to 10mm dia (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal / square nuts and 5 to 10 CM long all as specified and directed.

S & F in repairs for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed. (Each line to be measured separately)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire

Supply only Chain link MS galvanisd fencing, any size or type

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to FE 410,E-250 Qualitry A including dismantling wrought or mild steel work of any description not otherwise provided for complete all as specified and directed.

M& L for Granite of any type 20MM thick cut beded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in vertical surfaces of wall incl 10 MM thick rendering in CM 1:4 Including Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedeed and pointed in any morter and any position.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified.

M&L for 100 mm thick cement concrete type D-2 (1:2:4) using 40 mm graded stone aggregate as in path/hardstanding/sub base complete all as specified.

M&L for Pre-polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand incl demolition of old paver block, complete all as specified and directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand incl demolition of old paver block, complete all as specified and directed.

M&L For pre-polished glazed designer ENDURA tiles/dura stone, coloured, 30cm x 30cm x 10cm thick , set, jointed and pointed in neat cement slurry, pointed in white or coloured cement to match in floors over 15mm thick Screed in 1:4 including dismantling of old dura stone tiles complete all as specified and directed.

ANZ CORPORATION (BID ID -3090838)

RC Madan (BID ID -3089682)

Markson (BID ID -3095383)

M/S MOHANPASARI (BID ID -3090669)