GENERAL

Manufacture, supply and delivery of H.D.P.E Pipes conforming to IS 4984-1995 including transportation to any where in A.P excluding Taxes. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M) (P.H Items, P.55)

Manufacture, Supply and delivery of C.I Pipes and Specials conforming to I.S.No.7181/1986, 5531/1988, 3950/1979 at site of work anywhere in A.P including loading, unloading, transportation to site of work staking at site transit risk and package, excluding Taxes - 1 Kg.

Manufacture, supply and delivery of H.D.P.E (PE-100 Grade) Fittings conforming to IS 4984-1995 including transportation to any where in A.P Excluding Taxes.

160mm Dia HDPE Long Neck(collor)

160mm Dia MS Flanges

160mm Dia L Bends

110mm Dia HDPE End Cap

110mm Dia HDPE Long Neck(collor)

110mm Dia MS Flanges

110mm Dia L Bends

110mm Dia HDPE End Cap

Supply, laying and jointing of C.I.D Joints complete with rubber rings including filling with water, including cost of jointing Material etc., complete.

150mm CID Joints

100mm CID Joints

Supply and Delivery of Bolts and Nuts With Double Washers including Taxes and Conveyance etc; Complete (1/2" to 1")

Supply and Delivery of Rubber Packing Sheet including Taxes and Conveyance etc; Complete

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (RBR-STCL-5)

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum

Filling with dust for trenches as per drawing and technical specification clause 305.3.9 MORD & 304 MORTH (revised RBR-FNDN-2.i)

Laying and Jointing of HDPE pipes by butt fusion welding as per IS 7634 Part I - II / 1975 as amended from time to time to alignment and gradient and testing the pipe line to the required pressure to site etc. complete to SS

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)-RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. 1.60 PN

Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces - 1 No. (PHE-CISV-15)

Labour charges for Interconnection of HDPE Pipe line including cost of all type of Labour charges for lowering, laying and fixing with supplied materials , cutting, etc., and finishing of item in Good condition to site complete to work.

Bailing out water from the pipe line trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper.

Provision for Seignorage charges

Provision Towards Demerit 2%

Provision Towards DMF 30%

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item