Development of Sonamukhi Eco Accommodation and Adventure Park and Rehabilitation of Unakoti Tourist Lodge at Kailashahar

Amount

Sonamukhi Eco-Accomodation & Adventure Park and Unakoti Tourist Lodge BOQ - All Works

Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:- -Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling of brick soling, stacking serviceable materials and unserviceable materials separately with all lifts and upto a lead of 500 m by manual means as per MoRD Technical Specification Clause 202.

Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer- in-charge:- -In cement mortar.

Demolishing reinforced cement concrete manually / by mechanical means including stacking of steel bars properly and disposal of unserviceable material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge.

Extra for cutting reinforcement in RCC or R.B. work manually / by mechanical means (payment to made on the cross sectional area of RCC or R.B. work) etc. complete as per direction of the Engineer- in-charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling steel work in built up section manually / mechanically without dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc. complete as per direction of the Engineer- in-charge.

Dismantling rolling shutters with all accessories and stacking properly and refitting the same after oiling and greasing the same with necessary cement concrete for fitting fixing of hold fasts etc. for all lifts and upto a lead of 50 m as required complete as per direction of the Engineer in charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. -For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re?plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in?charge.

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.

Excavation in Soil with Dozer with lead upto 100 m-Excavation for roadway in soil by mechanical means with Dozer including cutting and pushing the earth site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per MoRD Tehcnical Specification Clause 302.3

Excavation for Structures -Without dewatering -Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out , construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. -Ordinary Soil -Upto 3m depth

Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200. -Sand filling

Clearing and grubbing road land including uprooting wild vegetation , grass, bushes, shrubs,saplings and trees of girth upto 300 mm , removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRD Technical Specification clause 201. -By Manual Means -In area of non-thorny jungle

Excavation in Cutting in soil by manual means with lead upto 50 m- Excavation in Roadway cutting in soil by using manual means for carrying of cut earth to embankment site with all lifts and lead upto 50 m as per MoRD Technical Specification Clause 302.3.

Compacting Original Ground -Compacting original ground supporting subgrade -Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per MoRD Technical Specification Clause 303.5.2.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. -All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. -All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)

Centering shuttering including struttings, propping etc. and removal of form work for:

Foundations, footings, bases for columns etc. for mass concrete with steel formwork

Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply

Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply

Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply

Stairs (excluding landings) except spiral-staircases with wooden plank

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply (For retaining wall)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All Work upto Plinth Level -1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level: -1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement? -1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- -1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement? -1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement? -1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. -Thermo-Mechanically Treated bars of grade Fe-500D or more

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. -Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement).

P.C.C grade M 15 - Nominal mix (1:2.5:5)

R.C.C grade M 25

Plain/reinforced cement concrete (using jhama brick aggregate) in substructure complete including formwork as per drawings & MoRD technical specification Clauses 802, 804, 805, 806, 807, 900, 1202, & 1204 (including centering, shuttering, staging etc. but excluding reinforcement) -P.C.C grade M 15 (1:2.5:5 Nominal mix)

Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in foundation complete as per drawings & MoRD technical specifications Clauses 1000 & 1202.

Plain/reinforced concrete in substructure complete including formwork as per drawings & MoRD technical specifications Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204 (including centering, shuttering, staging etc. but excluding reinforcement). -R.C.C grade M-25 - For height above 5 m upto 10 m

Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar in substructure complete as per drawings & MoRD technical specification Clauses 1002, 1005, 1010 and 1202.

First class brick work in foundation and plinth including cost of all materials as required complete:- -In cement mortar 1:4 ( 1 cement : 4 fine sand ).

First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- -In cement mortar 1:4 ( 1 cement : 4 fine sand ).

Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- -In cement mortar 1:4 ( 1 cement : 4 fine sand ).

Providing weep holes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7.

12 mm cement plaster of mix -Cement mortar 1:4 (1 cement : 4 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix: -Cement mortar 1:4 (1 cement : 4 fine sand)

6 mm cement plaster of mix : -Cement mortar 1:4 (1 cement : 4 fine sand)

Neat cement punning.

Plastering with cement mortar (1:4) 12 mm thick on brickwork/ C.C. work including a finishing coat of neat cement punning with 2.75 kg of cement per sqm in substructure as per MoRD technical specification Clauses 613.4 & 1204.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : New work ( two or more coats) over and including water thinnable priming coat with cement primer.

Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content [Payment shall be made after submission of Test Certificate issued by the Manufacturer].

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : -Sal Wood

Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement :

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass (weight not less than 10ks/Sqm) panes including black enamelled ISI marked MS butt hinges with necessary screws. -Local Teak wood -35 mm thick

Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, window and clereslory window shutters (Area of opening of glass panes excluding portion inside rebate shall be measured) -5.5mm thick instead of 4mm thick.

Extra for providing ISI marked Stainless Steel butt hinges instead of black enamelled M.S. butt hinges with necessary screws. (Shutter area to be measured).

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).

Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality).

Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete :

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall usuing MS screws of 65/100 mm size complete as per manufacturers' specification and direction of Engineer-In-Charge.

Providing and fixing to existing door frames 30mm thick factory made solid both side prelam panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles, top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5mm thick heat moulded prelam PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, button and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5mm thick both side Prelam PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together

Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. -152x42x18 mm weighing not less than 60 gms.

Providing and fixing specified wood frame work consisting of battens 50 × 25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. -Gamair Wood

Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately). -Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick conforming to IS:14587

Contruction of Cupboard/Wardrobe with 19mm thick BWR Plywood, Laminated with 0.6mm plain white sheet mica in the interior and 1mm wooden textured sheet mica in the exterior, including fixing all accessories like handle, hinges etc. all complete as per the direction of Architect/Engineer in charge

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. -Hot finished seamless type tubes

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:- In grating, frames, guard bar, railing, brackets, gates and similar works, all complete.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 275mm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters & with handles, hold fast including embedding in cement concrete of required grade required for fixing in position, all necessary fittings, including applying of approved steel primer etc. complete as required:- 80xl.25mm M.S. laths with 1.25 mm thick top cover.

Providing and fixing ball bearing for rolling shutters (exceeding 10 sqm area) of approved make complete as required.

Extra for providing & fixing mechanical device chain and crank operation for operating rolling shutters of approved make complete as required:- -Exceeding 10.00 sqm and upto 16.80 sqm in the area.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. -Fixed to steel windows by welding.

Providing and fixing in position 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junction and corners 25mm dia pulley, 40x40x6mm angle and T-iron guide sufficiently long at the top and bottom respectively, channels & with bolts, nuts, rivets, locking arrangement, stoppers, handles, hold fast including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:- -Using M.S. angels 40x40x6 mm for diagonal braces.

Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bomboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of local teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded poly ethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bomboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. -Anti-Skid Tiles -Ceramic Tiles 1st quality 400 x 400mm in all shades and designs

Providing and fixing rectified glazed wall tiles 300 x 450 mm or more conforming to IS : 15622 - 2017 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.

Providing and laying 18 mm thick Polished Tan Brown Granite flooring all complete as per the architectural drawings over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing and laying 18 mm thick Flamed Finished Tan Brown Granite flooring all complete as per the architectural drawings over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing and laying 18 mm thick Polished Steel Gray Granite flooring all complete as per the architectural drawings over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Double charged Stainfree vitrified tiles - Size of tile 60x60 cm

Soluble Salt Stainfree vitrified tiles - Size of tile 60x60 cm

Providing and laying readymade vitrified step (riser) tiles of size 1200 x 600 mm (15mm thickness), with water absorption less than 0.5 % and conforming to I.S. 4457 : 2007, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete

Providing and laying readymade vitrified step (tread) tiles of size 1200 x 300 mm (15mm thickness double bull nosing), with water absorption less than 0.5 % and conforming to I.S. 4457 : 2007, of approved make, in all colours & shade, in steps, laid on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge.

Stone Cladding work gang saw cut (polished and machine cut) of approved thickness for wall lining (veneer work), backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 fine sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (to be secured to the backing by means of cramps, which shall be paid for separately), including rubbing, curing etc. complete at all levels as required: -Polished Ruby Red Granite

Providing and laying 18 mm thick Polished Jhansi Red Granite flooring all complete as per the architectural drawings over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing and laying 18 mm thick Flamed Finished Jhansi Red Granite flooring all complete as per the architectural drawings over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1 : 3 ( 1 cement : 3 fine sand ) and joined with ordinary cement slurry mixed with pigment to match the shade of slabs, including rubbing and polishing complete.

Providing and fixing Kota stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishing complete. -Kota stone slab 25mm thick

Supply and Installation of Composite Roof Panel 30 MM PCC 45/250 top 0.4 MM Thick color caoted Galvalume sheet in any shade and colour,Polyurethane of Density 40 Kgs M3 (+- 2KGS ), ,240 MPA BOTTOM SHEET 0.4 MM thick. The panel shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Supply & installation of pre-painted Galvalume sheets roofing accessories in 550mpa steel steel grade, made out of Cold rolled steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to AASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. The sheet shall be fixed using self drilling /self tapping screws with EPDM washers complete for Ridges/Valley/Gutter/Flashing of width 610mm: -0.80mm thickness

Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. -0.80mm thick with zinc coating not less than 275gm/m2

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 fine sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand) and finished neat complete.

Providing and fixing high density fiber laminated wood ceiling of approved quality with necessary nails etc. complete with planks of high density fiber laminated wood planks of sizes 8mm thick, 1202mm length (minimum) and 192 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) conforming to EN 13329 standard issued by Manufacturer, including framework consisting of 75mm x 36 mm wooden battens all complete as specified and as directed by the Engineer-in-Charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I.

12.5 mm thick tapered edge gypsum moisture resistant board.

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 fine sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : Using rough kota stone.

Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi?metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof.

The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of aluminium composite panel material of approved thickness and specification. The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places."

Aluminium Composite Panels of 4mm total thickness with Top coil – 0.50mm AA3003 / AA3105 / AA5005 Grade manufactured as per IS-737 1986, FR Grade Class B1 with 3mm Mineral Core with minimum 70-72% Inorganic content (Aluminium Hydroxide and Magnesium Hydroxide) 28-30% Organic content (LDPE) conforming to ASTM E-119- 16,18 and EN 13501-1, class B1,and Bottom coil – 0.50mm AA3003 / AA3105 / AA5005 Grade, manufactured as per IS?737 1986 with minimum 25 microns lead free PVDF Coating conforming to AAMA2605 on top coil and Service coating on Back Coil (4 - 6 microns) having minimum panel weight of 7.5 Kg/m2

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing aluminium tubular handle bar of 32 mm outer dia, 3.0 mm thick and 2100 mm long with Stainless Steel screws etc. of approved quality complete as per direction of Engineer-in-charge:- -Polyester powder coated aluminium minimum thickness 50 micron.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineer­in­charge. (Glazing and paneling and dash fasteners to be paid for separately) :- Polyester powder coated aluminium ( minimum thickness of polyester powder coating of 50 micron ).

Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :- -With float glass panes of 8 mm thickness ( weight not less than 20 kg / sqm )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. -Concealed work including cutting chases and making good the walls etc.

15 mm nominal outer dia .Pipes.

20 mm nominal outer dia .Pipes.

25 mm nominal outer dia .Pipes.

32 mm nominal outer dia .Pipes.

Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : -One urinal basin with 5 litre white P.V.C. automatic flushing cistern.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer?in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete -Flexible pipe - 40 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder : -C.P. brass

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. -15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 -15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. -15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 -15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: -150 mm diameter

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. -600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.

Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:

Single socketed pipe - 75 mm OD

Single socketed pipe - 100 mm OD

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water, soil, waste & vent pipes pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:

Single pushfit Coupler - 75 mm

Single pushfit Coupler - 110 mm

Single equal tee without door - 75x75x75 mm

Single equal tee without door - 110x110x110mm

Bend 87.5° - 75 mm

Bend 87.5° - 110 mm

Plain shoe - 75 mm

Plain shoe - 110 mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water, soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.

Granular Sub-base with Well Graded Material (using Jhama Brick Aggregate) (Table 400.1) -(A) By Mix in Place Method -Construction of granular sub-base by providing well graded material (Jhama Brick Aggregate, Grading-I, as per Table 400.1, spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per MoRD Technical Specification Clause 401 -(i) For Grading - I Material (jhama brick aggreate)

Water Bound Macadam Sub-Base / Base -WBM Grading 1 -Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density 'Grading 1' as per MoRD Technical Specification Clause 404. -By Manual Means

Water Bound Macadam Sub-Base / Base using Jhama Brick Aggregate -WBM Grading 2 -Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading- 2 as per MoRD Technical Specification Clause 405. -By Manual Means

Water Bound Macadam Sub-Base / Base using Jhama Brick Aggregate -WBM Grading 3 -Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading- 3 as per MoRD Technical Specification Clause 405. -By Manual Means

Gravel / Soil - Aggregate Base ( Table 400.2 ) Construction of gravel / soil - aggregate base by providing well graded material, spreading in uniform layers with Tractor mount grader on prepared surface, mixing by mix in place method with Tractor mount rotavator at OMC, and compacting with three wheel 80 - 100 kN static roller to achieve the desired density, complete as per Technical Specification Clause 402. -Grading A

Providing & laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and MoRD technical specification clause 1204.3.8.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 509 complete in all respects. -Grading I -With Viscosity Graded Bitumen of VG-30.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete inposition to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast c.c. kerb stone shall be approved by Engineer-in-Charge).

Supply and Installation of EPDM Flooring as per specification and the direction of Engineer-in-Charge

Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent oulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/direction of the Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern.

Providing and laying White Granite Cobbles , laid over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of Cobblestone blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per specifications & approval/ direction of Engineer-in-Charge.

Providing and laying Red Granite Cobbles , laid over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of Cobblestone blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per specifications & approval/ direction of Engineer-in-Charge.

Providing and laying Yellow Granite Cobbles , laid over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of Cobblestone blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per specifications & approval/ direction of Engineer-in-Charge.

Providing and laying Black Granite Cobbles , laid over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of Cobblestone blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per specifications & approval/ direction of Engineer-in-Charge.

Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size well burnt brick aggregate and base course and filling with 150 mm thick fine sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.

Providing and fixing CNC machine cut (SS 304 plate of 2mm thickness) Letters upto 10 metre height, fixed to structural steel frame work as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work shall be paid for separately).

Providing, installation and commissioning of package type Iron Removal Plant comprising of Iron Removal Filter of dual media filter with anthracite coal, filter gravel, polypropelene double hexagonal nut strainer etc., mixing chamber for coagulants like sodium alluminates etc., oxidation chamber with manganese dioxide , metering pump for coagulant dosing, air compressor of suitable capacity with motor, back washing arrangements, disinfection with sodium hypochlorite solution through metering pump, all necessary pipes for raw water collection, inter connecting all the chambers, delivery outlet of 150 mm dia alongwith all related civil, mechanical and Electrical works etc. complete as per approved drawing, process flow, technical specification and direction of the Engineer - in - charge.

5000 G.P.H. capacity

2500 G.P.H. capacity

Drilling and boring pilot hole in any soil strata by deep drilling / high power rig, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the pilot hole properly as per specification [(IS: 2800) (part-I)] and direction of the Engineer-in-charge. -With Contractor's high power rig -Up to 250 mtr. -320 mm dia.

Reaming of pilot hole to an enlarged bore hole in any soil strata by deep drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly as per specification (IS:2800)(part-I)] and direction of the Engineer-in- charge. -With Contractor's high power rig - From 320 mm dia. pilot hole to 550 mm bore hole. -Up to 250 mtr.

Washing of enlarged bore hole of 460 - 550 mm dia. in any soil strata by deep drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly including lifting of drill pipes as per specification [(IS:2800)(part-I)] and direction of the Engineer-in-charge. -With Contractor's high power rig

Providing and Lowering of ERW pipe conforming to IS:3589-2001(with latest revision) with deep drilling rig including painting with anti-corrosive bitumastic paints, fixing of M.S. ring, welding of all joints etc. complete after washing of the bore hole as per specification [(IS:2800)(part-I)] and direction of the Engineer-in-charge. - With Contractor's high power rig

300 mm dia. ERW housing pipes.

200 mm dia. ERW blind pipes.

200 mm dia. ERW slotted pipes.

Providing and Shrouding of the deep tube well assembly with washed peagravels (2.0 - 4.75 mm effective size) as per specification(IS:4097) using deep drilling rig and direction of the Engineer -in - charge. -With Contractor's high power rig -with Pea- Gravels obtained from Durgapur, West bengal.

Providing and fixing of bail plug (made with 8 mm thick MS sheet) by welding with blind pipe including applying of anti?corrusive bitumastic paint as per specification (IS : 2800 (part?I)) and direction of the Engineer - in - charge. -For 200 mm dia. ERW pipes

Providing and fixing of reducing socket (made with 8 mm thick MS sheet) by welding with blind pipe including applying of anti-corrosive bitumastic paint as per specification [(IS:2800)(part-I)] and direction -With Contractor's high power rig -300 X 200 mm dia.

Providing and fixing of housing clamp (made with 12 mm thick MS sheet) by welding with blind pipe including applying of anti-corrosive bitumastic paint as per specification [(IS:2800) (part-I)] and direction of the Engineer - in - charge. -300 mm dia

Washing and development of tube well by using air compressor and testing of the well as per specification (IS 11189) and direction of the Engineer-in-charge. -Beyond 200 mtr pipe assembly -With Contractor's air compressor -Using air compressor of 1100 cfm output

Providing and fixing of well cap (made with 8 mm thick MS sheet) by welding with blind pipe including applying of anti-corrosive bitumastic paint as per specification[(IS:2800(part-I)] and direction of the Engineer-in- charge.

For 300mm dia. ERW pipes

For 200mm dia. ERW pipes.

Charges for electro-logging for ground water exploration related to potable drinking water purpose borewell (200-550 mm dia) using a microprocessor based digital multiprobe borewell logger and submission of acquired data in the shape of numerical as well as graphical and determination of lithologgy and static graphic co-relation of acquifer, effective porosity and permeability, location of water bearing and saturated water zone and its corresponding discharge and also guidance for setting up of tapping zone etc. complete as per direction of the Engg-in-charge (All necessary equipments relating to electro-logging should have to be arranged by the agency). -BGL upto 250.00 mtr.

Providing and fitting fixing of 5000 GPH x 76 mtrs. Head water lubricated submersible pump of maximum 150 mm outer dia. With maximum 10(ten) stages coupled with required water and non-cover loading submersible motor suitable for 340-440 volts, 3 phase 50Hz, A.C supply and star delta method of starting along with 35 mtrs. x 2 x 3 x 4 sq. mm jointless P.V.C 3 (three) core double length flat cable ( continuous length) if suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non-return valve cum discharge case including supplying of 10 Nos. suitable cable guard with clamps as per direction of Engineer-in-chargeconforming to terms & conditions of the contract ( Each pump with motor shall consits of stainless steel closed type impeller, C.I bowl, C.I discharge case, pujmp shaft (stainless steel), bush (bronze), shaft sleeve (bronze/chromium), sand guard, winding rotor, stator, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant BIS codes. )

Installation of submerssible pump and suitable motor upto required depth with GI column pipe in/c providing fitting fixing by necessary rubber washer, nuts & bolts, MS safety clamp etc. as per required size and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run as per direction of the Engineer-in?charge (pump, motor with cable, GI pipe will be issued by the Department at free of cost and fabrication of GI column pipe will be paid separately). -5000 / 7500 GPH capacity

Drilling and boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the Engineer - in - charge. -100 mm dia.

Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means, disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per specification and direction of the Engineer - in - charge. -From 100 mm dia pilot hole to 250 mm bore hole

Providing and Lowering of UPVC pipe as per IS : 12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-in-charge.

‘CM’ Casing pipe. - 150mm dia.

‘CM’ Casing pipe. - 100mm dia.

RS' Pipe. - 100mm dia.

Washing & development of Tube Well by using hand pump or by any suitable method & testing of the well as per specification & direction of the Engineer in charge

Providing and fixing of UPVC end cap suitable for UPVC ‘CM’ casing or ‘CS’ casing or ‘RS’ pipes as per specification and direction of the Engineer-in-charge. -100mm dia.

Providing and fixing of UPVC reducer suitable for UPVC ‘CM’ casing or ‘CS’ casing or ‘RS’ pipes as per specification and direction of the Engineer-in-charge. -150 x 100 mm dia

Providing and fixing of housing clamp ( made with 12 mm thick MS sheet ) along with well cap (made with 10 mm thick MS sheet ) with necessary arrangements for SBDTW as per specification and direction of the Engineer - in - charge. -150 mm dia

Providing and shrouding of the deep tube well assembly with washed pea gravels ( 2.0 - 4.75 mm effective size ) as per specification ( IS : 4097) and direction of the Engineer - in - charge. -with contractor's rig -with pea gravels obtained from Durgapur, West Bengal.

Providing and Installation of 3 HP (single/three phase) submerssible Pump (Electrical) as per relevent IS code with LT control panels connected with 100 mtr insulated cables from the distribution lines, 2 nos. electric pole of 8.5 mtr long 7/16 cable, well cap, housing clamp, column pipes, single/three phase earthing, motor starter, control panel box with locking arrangement with all accessories complete as per the direction fo the Engineer-in-charge.

Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-9 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge. -100 mm dia Ductile Iron Class K-9 pipes.

Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-9 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge. -80 mm dia Ductile Iron Class K-9 pipes.

Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per CPWD specification and direction of the Engineer - in - charge. -100 mm dia

Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per CPWD specification and direction of the Engineer - in - charge. -80 mm dia

Disinfecting C.I. / D.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the DWS laboratory as per IS:2800 and direction of the Engineer - in - charge. -100 mm dia

Disinfecting C.I. / D.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the DWS laboratory as per IS:2800 and direction of the Engineer - in - charge. -80mm dia

Providing and Fixing DI Specials as per CPWD specification and direction of Engineer-in-Charge.

D.I. all socketted Bend 90 degree - 100 mm dia

D.I. all socketted Bend 45 degree - 100 mm dia

D.I. all socketted Bend 22.5 degree - 100 mm dia

D.I. all socketted Bend 11.25 degree - 100 mm dia

D.I. all socketted Bend 90 degree -80 mm dia

D.I. all socketted Bend 45 degree -80 mm dia

D.I. all socketted Bend 22.5 degree -80 mm dia

D.I. all socketted Bend 11.25 degree -80 mm dia

Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge -100 mm diameter - PN-1.6

Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge - 80 mm diameter - PN-1.6

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately): -100 mm dia

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately): -80 mm dia

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately): -50 mm dia

Providing and fixing C.I. non-return valve of approved quality as per CPWD specification and direction of the Engineer - in - charge. -100 mm nominal bore

Providing and fixing C.I. non-return valve of approved quality as per CPWD specification and direction of the Engineer - in - charge. - 80 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

100 mm nominal inner dia .Pipes.

62.5 mm nominal inner dia .Pipes.

40 mm nominal outer dia .Pipes.

32 mm nominal outer dia .Pipes.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

32 mm nominal bore

40 mm nominal bore

Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 190 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : -With 2nd class bricks

Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete -150 mm diameter

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : -Inside dimensions 455x610 mm and 45 cm deep for pipe line with three or more inlets :

Extra for depth beyond 450 mm of brick masonry chamber for underground C.I. inspection chamber with same specification as mentioned in item no 20.330 complete as per standard design : -For 455x610 mm size

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : -With 20 mm diameter round bar

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

Supplying and fixing C.I. cover without frame for manholes -500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg.

Supplying and fixing C.I. cover without frame for manholes : -455 x 610 mm rectangular C.I. cover (light duty)the weight of the cover to be not less than 23 kg.

Providing and laying Reinforced Cement Concrete Pipe NP3 as per design in single Row Providing and Laying reinforced cement concrete pipe NP3 with collar for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per MORD Technical specification Clause 1106. -600 mm dia

Grating over storm water drainage channel using 40mm nominal bore G.I pipe, 1.5m x 0.3m size of each grating, with 4 pipes placed at a distance of 70 mm c/c, welded on top of 2 x 65mm nominal bore G.I pipe of 0.8 m length, for support, placed transversely at a distance of 300mm from each end, finished with a coat of primer and painted with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade.

Grating for Anaerobic Baffle Reactor using 20mm TMT bars, placed at 40mm c/c and a frame made from the same material, welded together in place , finished with a coat of primer and painted with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade.

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. -450 lpm at 35 m Head

Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete : -25 mm nominal bore

Providing & fixing of pressure switch in M.S. pipe line ( suitable for 1-10 Kg/cm2) including connection etc. as required.

Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-21 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc. as per requirement in approved manner.

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.

200mm dia.

150mm dia.

100mm dia.

80mm dia.

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

300 mm dia (wall thickness 7.1 mm)

200 mm dia (wall thickness 6.3 mm)

150 mm dia

100 mm dia

80mm dia.

25mm dia.

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :

100mm dia.

150mm dia.

200mm dia.

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Supplying and fixing 63 mm dia, 15 mtr long Flax canvas hose pipe with 63 mm dia Male and Female Stainless Steel-IS: 3444 Grade-1 couplings duly binded with GI wire, rivets etc. conforming to IS: 636 (Type -A) as required.

Supplying and fixing of MS hose cabinet box of made of 2 mm thick MS sheet and 40 x 40 x 5mm angle iron with front openable cover having 6 mm thick glazed glass viewing window i/c necessary locking arrangement, on existing wall/ brick platform etc complete as required. Size 600 mm x 600 mm x 500 mm

Providing and fixing fire brigade 63mm dia GM suction coupling to 100/150 mm dia suction pipe complete.

Providing and fixing standard fireman's axe (tested for 20000 Volts) with heavy insulated rubber handle. (ISI marked)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way - 150 mm dia M.S. Pipe

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Supply, installation, testing and commissioning of loop isolate module

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supply, installation, testing and commissioning of control module

Providing and fixing FRLS Armoured Cable from individual flow switches on each floor to annunciation panel installed in fire control room in basement including sleeves, cable clips, supports for horizontal runs making connection to each switch complete. -2 core 1.5 Sqmm

Supply, installation, testing and commissioning of Gong Bell Unit with tapping, pipes, Valves, interconnecting hoses and pipings complete as required to make it operational.

Supply, installation, testing & commissioning of UPS (1 KVA) with two-hour Power Backup and other required accessories.

Supply & Fixing ISI marked (IS:13849) Portable Fire Exitnguisher, ABC type capacity 5 kg, finished externally with red enamel paint, complete in all respects including initial fill and wall suspension. Capacity 5 kg

Supply & Fixing ISI marked (IS:2878) Portable fire Extinguisher, Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia. min. 600 mm long & complete in all respects including initial fill with C02 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667and wall suspension bracket. Capacity 4.5 Kg

Supply & Fixing ISI marked (IS:2878) Portable fire Extinguisher, K- type flat base including valve, discharge hose of not less than 10 mm dia. min. 600 mm long & complete in all respects including initial fill with C02 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667and wall suspension bracket. Capacity 3 Kg

Supply & Fixing ISI marked (IS:10204) Poratable Fire Exitnguisher,Trolley mounted Mech. Foam type capacity 09 ltrs with gun-metal cap and nozzle and complete respects in all respects including initial fill and wall suspension. Capacity 9.0 ltrs

Supply & Fixing of ISI marked (IS:2878) Fire Extinguisher, Trolley mounted, CO2 (gas pressure) type capacity 22.5 Kg. with gun-metal cap. And nozzle and complete in all respects including initial fill and wall suspension bracket. Capacity 22.5 Kg

Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete as required as per direction of the Engineer-in-charge: -Serrated with central bulb (225 mm wide, 8-11 mm thick)

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification

Grouting of Retaining wall in cement grouting mass as per direction of Engineer Incharge.

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : -Upto 300 mm dia.

Providing and fixing in position MS Puddle collar (approx. 1m length) inside the wall including all material labour as per Technical Specifications and as per direction of Engineer. -300 mm dia. Pipe

Providing and fixing in position MS Puddle collar (approx. 1m length) inside the wall including all material labour as per Technical Specifications and as per direction of Engineer. -Up to 200 mm dia. Pipe

Providing and fixing Galvanized chicken mesh (24 guage, 12 mm size) properly stretched and nailed ensuring equal thickness of plaster at junction of masonry work and concrete members.

Providing, installation of Hand operated overhead traveling crane on turn key basis of capacity 2 Tonnes, all including Horizontal & longitudinal girder size: ISMB200, square bar for top of the longitudinal girder, the hoist & trolley, which traverses across the Horizontal & longitudinal and lifts up and down, two set of chain pulley (single girder type crane having Horizontal and longitudinal motion along the entire length of pump house.) including all material and labour etc. and commissioning as per Technical Specifications and as per direction of the engineer. Room size inner: 10.5m x 6.5m

Providing, installation, testing and commissioning of Circular Bellow, Grade: SS 304 section moulded to shape and fitted with a rotatable coated steel flange to each end for connection to flanged pipework. -150mm dia.

Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete : -25 mm nominal bore

Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : -200 mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. -150mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. -100mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

100mm dia

150mm dia

200mm dia

300mm dia.

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

100mm dia

150mm dia.

200mm dia.

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. -2850 lpm at 70 m Head

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. -2850 lpm at 70 m Head

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. -180 lpm at 70 m Head

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Dewatering pump: Supplying, installation, testing and commissioning of auto on/off Drainage Submersible Pump (2 no's) (DPK.10.50.075.5.0D) suitable for single phase, 230 volts AC supply including connection of suction and delivery line etc. , (Q= 14 cum/hr., Head = 10m), including of control panel 2P 3PH 8A auto GIDPC auto on/off, complete as required in all respect as per technical specification and as per direction of Engineer.

Supply, Installation, Testing & commissioning of factory assembled of fuel tank, 220 ltrs, battery charger panel - 12V including all necessaries accessories complete as per technical specification and as per direction of Engineer.

Supply, Installation, Testing & commissioning of 12 V/ 180AH tall tubular/ flat plate Battery complete as per technical specification and as per direction of Engineer.

Supply, Installation, Testing & commissioning of control Fire Panel: Including auto / Manual Operation Considered, Individual Pressure Switch is and pressure transmitter considered for each Pump, Potential Free Contacts for On / Off and Trip of each Pump Considered for BMS, Indoor / Basement Mounted Enclosure Considered, Cable Bottom Entry Considered, One Voltmeter and Individual Ammeter considered and MCCB considered at incomer etc. complete as per technical specification and as per direction of Engineer.

Supply, Installation, Testing & commissioning of Cable with level switch 10m length complete as per technical specification and as per direction of Engineer.

Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12"x 12" having locking arrangement including CC work, holes on earth pipe etc. as required.

Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required.

Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required.

Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:-

6 to 32 amps SP MCB.

6 to 32 amps FP MCB.

Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:-

Short Point

Medium Point

Long Point

Wiring for light/ fan/ exhaust fan/ call bell point with 2x1.5 sq. mm PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall complete with 6/10 amp moduler type switch, switch board, cover plate, GI box including necessary connection etc. as required.

Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2 x 1.5 sq. mm PVC insulated Copper conductor cable (FR) on modular concealed switch board with cover plate earthing the 3rd pin etc. as required.

Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2 x 2.5 sq. mm PVC insulated Copper conductor cable (FR) on modular concealed switch board with cover plate earthing the 3rd pin etc. as required.

Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required 2 X 1.5 + 1 X 1.5 sq mm

Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required.

1-2 module GI switch board:-

3 module GI switch board

4 module GI switch board

12 module GI switch board

Supplying and fixing of the following sizes modular type cover plates for GI/Plastic modular switch boards etc. as required.

1-2 module

3 module

4 module :-

12 module :-

Supplying and fixing of the following electrical accessories including necessary connection etc. as required.

5/6 amps piano type switch

16/20 amps piano type switch

3 pin 5/6 amps piano type socket

3/6 pin 16/20 amps piano type socket

Angle/batten holder

Ceiling rose

Electronic fancy type 5 step fan regulator with cover plate.

Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required.

19/20 mm dia

25 mm dia

Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required. 8 way horizontal TPN MCB DB (Single door):-

Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required:-

Supplying & fixing of 1200 mm sweep white color AC ceiling fan with brush less dirrect current (BLDC) motor having class B insulation, power factor not less than 0.9 complete with 300 mm down rod, canopies, shackle kit, 3nos blades, safety rope including wiring the down rod with 2x1.5 sqmm PVC insulated copper conductor cable(FR) (BEE 5 star/minimum service value 6.0 m3/min/W & tolerance as per IS:374-2019) : -

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape, including painting the exposed portion as per standard drawing complete as required (provided incase of low ceiling height)

Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-

Surface mounted round/Square shaped 18/20 watt LED downlight with integral driver and high quality polycarbonate diffuser:-

Recessed/Surface mounted 1ft x 1ft decorative 16/18 watt LED panel light with integral driver and high quality polycarbonate diffuser:-

Surface mounted integrated 20 watt LED batten with polycarbonate diffuser:-

Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required:-

2 core - 10 Sq mm

4 core - 16 Sq mm

3.5 core - 50 Sq mm

3.5 core - 95 Sq mm

3.5 core - 185 Sq mm

Supplying and fixing of aluminium terminal ends (LUGS) - long barrel of following sizes : -

Providing, fixing and laying rigid UPVC pipes conforming to IS: 4985 jointing with couplers, of same class conforming to IS :10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.Class - 3 ( working pressure 6.0 kg / cm2) -

Supplying and fixing of following accessories for modular accesories including necessary connection etc. as required:-

32 amps one way DP switch (2M)

TV socket outlet (1 M)

Louvers/opaque type foot lamp (4M):-

RJ 11 telephone outlet 1M

RJ 45 LAN socket outlet (1M):-

Supply, Installation, Testing and Commissioning of approved make split Inverter type Air Conditioner unit with cooling unit (copper coil) and condensing unit (copper coil) including 5 years compressor warranty and standard length of upto 5 metre of copper piping with insulation etc complete as per specification: 2.0 Ton split type Inverter AC {5 Star}

Supply, Installation, Testing and Commissioning of 43-inch or above LED Display,Resolution : 3840*2160 (4K UHD),Brightness(Typ.): 350 nits or better Contrast Ratio : 5000:01:00 or better ,Viewing Angle(H/V) :178/178Response Time(G-to-G) :8ms(Typ.) or better ,Operation Hour : 16/7,Haze : 2%, Input : DVI-D,HDMI 2.0 (2),HDCP 2.2,Stereo Mini Jack, DVI/HDMI/Audio(Common),USB 2.0 x 2,Output:Stereo Mini Jack,RS232C(in/out) thru stereo jack, RJ45,IR Special Features :H/W: Temperature Sensor,Pivot Display, Clock Battery(168hrs Clock Keeping), Built in Speaker(10W 2ch or better), IP5x, Wi-Fi/BT S/W: Auto Source Switching & Recovery, Button Lock, Hot key option, Plug&Play (Initial Setting) remote control etc with wall mounting bracket.

Supplying and drawing 4 pair 0.5 mm FR PVC insulated copper conductor, unarmored telephone cable in the existing surface/ concealed steel/ PVC conduit as required.

Supplying and drawing RG-11 grade co-axial TV cable PVC insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ concealed steel/ PVC conduit as required

Supplying and fixing of following vertical storage water heater 5 star catagory complete with 15 amps top, connection pipes including necessary connection etc as required. 25 litre storage capacity.

Supply, installation, testing and commissioning of following 160 kva capacity diesel Generating Set (alternator directly coupled to diesel engine) compete in all respect broadly comprising of following and as per CPCB 2 norms (upto date ammended), including following specification. A. Alternator : Self excited, brush less type, of following capacity, 3 phase, 415 volts 50 Hz, 4 pole, AC alternator complete with all accessories.B. Engine : water cooled diesel engine of suitable BHP for rated alternator at 1500 rpm, turbo charged, direct injection type, 4 stroke, 4/6 cylinder including specified size fuel tank of approved design and shape duly calibrated and painted with one coat of primer and two coats of synthetic enameled paint of approved colour, residential type silencer with exhaust MS pipe (upto 2 metre beyond silenser) duly wrapped with asbestos rope of legging of specified quality and specification.C. AMF Panel : Cubical, compartmentalized, AMF panel board with all suitable size power and control contactors, switches, meters and other accessories, internal wiring, connection, inter-connection etc. for trouble free smooth functioning of DG Set complete with battery charger and leads as per specification.D. Base Plate : Common base plate of required size for mounting of engine alternator set fabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting etc. as per specification. 160 KVA

Supply and fixing of 25mm x 5mm GI strip on wall/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals.

LT Panel :- Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and 900mm (NS) deep made out of not less than 2 mm thick CRCA MS sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ameters ets as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as required for completeness and as per attached specification, direction of Engineer, CPWD standards and Electrical Inspectorate standards. (Only face area is to be measured) INCOMER 1 No.400A FP MCCB(35 KA) (1 for main incomer) 4 pole MCCB, 200A, Adjustable Microprocessor Release, 35KA for D.G incomer - 1nos Metering & Indication 2 set of phase indicating lamps 2 set of (0-500V) Voltmeter with VSS 1 set of (0-400A) Ammeter with ASS with 3 no s.400/5A CTs 1 set of (0-200A) Ammeter with ASS with 3 no s.200/5A CTs BUS-BAR 1 Set of 400A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS 14 Nos.63 A FP MCCB (10KA)

LT Panel :- Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and 900mm (NS) deep made out of not less than 2 mm thick CRCA MS sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ameters ets as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as required for completeness and as per attached specification, direction of Engineer, CPWD standards and Electrical Inspectorate standards. (Only face area is to be measured) INCOMER 1 No.250A FP MCCB(35 KA) (1 for main incomer) 4 pole MCCB, 100A, Adjustable Microprocessor Release, 35KA for D.G incomer - 1nos Metering & Indication 2 set of phase indicating lamps 2 set of (0-500V) Voltmeter with VSS 1 set of (0-100A) Ammeter with ASS with 3 no s.100/5A CTs 1 set of (0-250A) Ammeter with ASS with 3 no s.250/5A CTs BUS-BAR 1 Set of 300A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS 9 Nos.63 A FP MCCB (10KA)

Design, Fabrication, Supply, Erection, Testing and commisioning of Powder coated, Weather Proof Double door type Feeder pillar fabricated out of 14 guage CRCA sheet steel in cubical, free standing, dust and vermin proof, with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Feeder pillar shall be treated with all anti-corrosive process before painting as per specification. Feeder Pillar shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)- Feeder Pillar: INCOMER- 1No. 63A FP MCCB(35 KA) , 1No. 63A FP Contactor, AOM switch & Timers for 24 Hrs. setting Metering & Indication- 1 set of phase indicating lamps BUS-BAR- 1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS-4 Nos. 32A FP MCB and 15 Nos. 6-32 SP MCB

Supplying, installation, testing and commissioning of following 50 kva capacity diesel Generating Set (alternator directly coupled to diesel engine) compete in all respect broadly comprising of following and as per CPCB 2 norms (upto date ammended), including following specification. A. Alternator : Self excited, brush less type, of following capacity, 3 phase, 415 volts 50 Hz, 4 pole, AC alternator complete with all accessories.B. Engine : water cooled diesel engine of suitable BHP for rated alternator at 1500 rpm, turbo charged, direct injection type, 4 stroke, 4/6 cylinder including specified size fuel tank of approved design and shape duly calibrated and painted with one coat of primer and two coats of synthetic enameled paint of approved colour, residential type silencer with exhaust MS pipe (upto 2 metre beyond silenser) duly wrapped with asbestos rope of legging of specified quality and specification.C. AMF Panel : Cubical, compartmentalized, AMF panel board with all suitable size power and control contactors, switches, meters and other accessories, internal wiring, connection, inter-connection etc. for trouble free smooth functioning of DG Set complete with battery charger and leads as per specification.D. Base Plate : Common base plate of required size for mounting of engine alternator set fabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting etc. as per specification. 50 KVA

Supply, Installation, Testing and Commissioning of Distribution Transformer (BIS-Level-II) -DTR 63KVA 11/0.433KV as per TSECL Standards and Specification and providing all necessary connections as per the instructions of Engineer-in-charge.

Supply, Installation, Testing and Commissioning of Distribution Transformer (BIS-Level-II)-DTR 200KVA 11/0.433KV as per TSECL Standards and Specification and providing all necessary connections as per the instructions of Engineer-in-charge.

Supply, Installation, Testing and Commissioning of 11 KV Grade 3Core XLPE Cable -Cable (XPLE 11KV) 3Cx120 sq mm as per TSECL Standards and Specification and the instructions of Engineer-in-charge

Supply, Installation, Testing and Commissioning of 11 KV Jointing Kit-11 KV cable kit for XLPE 3 core 120 sqmm indoor as per TSECL Standards and Specification and the instructions of Engineer-in-charge

Supply, Installation, Testing and Commissioning of 11 KV Grade 3Core XLPE Cable-Cable (XPLE 11KV) 3Cx70 sq mm as per TSECL Standards and Specification and the instructions of Engineer-in-charge

Supply, Installation, Testing and Commissioning of 11 KV Jointing Kit -11 KV cable kit for XLPE 3 core 70 sqmm indoor as per TSECL Standards and Specification and the instructions of Engineer-in-charge

Supply of swaged steel tubular pole as per IS 2713 with base plate of size 300x300x6mm welded at bottom, necessary hole for cable entry and earthing stud welded at specified height including painting with one coat of red oxide zinc chromate primer.7METER

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 6.5 metre and upto 8.0 metre

Supply, Installation, Testing and Commisioning of contemporary design Single arm Lighting Pole with inbuilt 70WX1 LED Modules of 6000mm Height, arm length 1145mm, made out of hot rolled steel grade E250, as per IS 2062:2011 and designed suitably for wind speed upto 50m/s wind conforming to IS 875: PART -3:1987. the square base plate of MS (grade E250) of size 300mmx300mm, 16mm thick and facilitated with 4 elongated slots 48mm x 24mm at CC 215X160mm to suit the 500mm, J-type, M20 bolts (Grade 4.6). The cable entry hole Ø70mm is provided at the centre of the baseplate. A base compartment for weather proof control box is provided at a height 300mm above the base plate with a die cast door contoured to the poles's shape housing the gear tray, pre-wired with 2.5 Sq.mm cable, Siemens/Anchor make MCB, terminal connectors for loop in loop out arrangement. The surface preparation of the pole & components shall be done by shot blasting which is environmentally safe eliminating the chemical and acid use and ensuring the thorough removal of impurities like rust, oxides and other unwanted particles from the surface for high standard coating. The surface finish of the pole shall be Zinc rich primer coat & pure polyester powder coating providing 60 Microns DFT. Pole consist of module based luminaire each 60W(Min IP68) with minimum delivered lumens of 110lm/W with led life span of L70 / B10 @ 60000 Hrs, SDCM ≤ 3, Type III light distribution, IK09, Operating Temperature of the luminaire is -40°C~ 50°C, Input Voltage 240V ac at 50-60Hz frequency, Operating voltage 100-277V ac with cut-off protection and self restart feature in case of over / under voltage and phase to phase voltage, driver efficiency > 85%, Power factor >0.9, THD <10% . Available CCT 3000K/4000K/5700K. Product finsih available: Pure polyester powder coated Graphite grey, Anthracite grey, black. Product should be BIS and CE Certified.

Supply, Installation, Testing and Commisioning of contemporary design double arm Lighting Pole with inbuilt 60WX2 LED Modules of 6000mm Height, arm length 1800mm, made out of hot rolled steel grade E250, as per IS 2062:2011 and designed suitably for wind speed upto 50m/s wind conforming to IS 875: PART -3:1987. the square base plate of MS (grade E250) of size 300mmx300mm, 16mm thick and facilitated with 4 elongated slots 48mm x 24mm at CC 215X160mm to suit the 500mm, J-type, M20 bolts (Grade 4.6). The cable entry hole Ø70mm is provided at the centre of the baseplate. A base compartment for weather proof control box is provided at a height 300mm above the base plate with a die cast door contoured to the poles's shape housing the gear tray, pre-wired with 2.5 Sq.mm cable, Siemens/Anchor make MCB, terminal connectors for loop in loop out arrangement. The surface preparation of the pole & components shall be done by shot blasting which is environmentally safe eliminating the chemical and acid use and ensuring the thorough removal of impurities like rust, oxides and other unwanted particles from the surface for high standard coating. The surface finish of the pole shall be Zinc rich primer coat & pure polyester powder coating providing 60 Microns DFT. Pole consist of module based luminaire each 60W(Min IP68) on each arm with minimum delivered lumens of 110lm/W with led life span of L70 / B10 @ 60000 Hrs, SDCM ≤ 3, Type III light distribution, IK09, Operating Temperature of the luminaire is -40°C~ 50°C, Input Voltage 240V ac at 50-60Hz frequency, Operating voltage 100-277V ac with cut-off protection and self restart feature in case of over / under voltage and phase to phase voltage, driver efficiency > 85%, Power factor >0.9, THD <10% .Available CCT 3000K/4000K/5700K. Product finsih available: Pure polyester powder coated Graphite grey, Anthracite grey, black. Product should be BIS and CE Certified.

Supply, Installation, Testing and Commisioning of 4.50 METER High an elegant and efficient 45W Lantern with toughened glass diffuser provide a unique comfortable light choice with symmetrical and glare free light distribution. Aesthetically designed sturdy construction ensure a long life against all weather condition, maintaining initial performance through lifetime of installation. The luminaire compromises of specially contoured spun aluminium top cover. The lamp along with control gear is housed inside and covered with a toughened glass diffuser at the top portion of extruded aluminium tube and the bottom portion attached to a mounting base. Lamp compartment encased in non-yellowing clear/ translucent UV stabilised acrylic diffuser. Die cast aluminium spigot base with aluminium alloy of low copper content for effective corrosion resistance. Suitable for mounting on 101 mm OD Pipe. Integral constant power supply. Product benefits are elegant, robust design, environmental friendly, moisture proof, insect free, low maintenance cost, reduces glare with minimum delivered lumens of 150lm/W with led life span of L70-B10-60000h@ Ta 25°C Mac Adam step 3 LED, IP65, CRI≥80, Power factor >0.95, THD<10, Surge Protection upto 6KV, Efficiency >89%. Operating Temperature of the luminaire is -15°C~ 50°C, Input Voltage 240V ac at 50-60Hz frequency, Operating voltage 100-277V ac with cut-off protection. Available CCT 3000K/4000K/5700K. Product finsih available: Pure polyester powder coated Graphite grey, Anthracite grey, Jet black. Product should be BIS and CE Certified.

Supply, Installation, Testing and Commisioning of aesthetically designed Column Light 40W LED with height 3500mm with Light Distribution 360°. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21). Material Characterstics Extruded aluminium bottom ribbed pipe (grade 6063 with test certificate) Ø166 x 3mm thickness & die-cast aluminium top cover. SS fasteners. Pre treated silicone gaskets. PDC aluminium service door 348mm height x 110mm width at 338mm height above the base plate shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable, 6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. MS mounting plate Sq. 250 x 12mm thick steel of grade E250 to IS 2062:2011 with 4 elongated holes 38 x 19 to suit M16 bolts at CC180. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation pole. Hot dip galvanised foundation bolt. IP65, Mechanical resistance IK07. LED module with minimum delivered of 150lm/w with Lifespan of the luminaire > 60,000 hours at L70B10, CRI >80 MacAdam step 3. Operating ambient temperature range is from -15°C to +50°C. Input Voltage 240V ac at 50-60Hz frequency, Operating voltage 100-277V ac with cut-off protection. Driver efficiency >85%, power factor >0.9, THD <10%, Surge protection 6KV. . Available CCT 3000K/4000K/5700K. Product finsih available: Pure polyester powder coated Graphite grey, Anthracite grey, Jet black. Product should be BIS and CE Certified.

Supply,Installation, Testing and Commissioning of 25w energy efficient In-ground recessed luminaire’s are designed to create luminous walkways, or accentuate architecture elements in facades and landscapes providing distinctive lighting effects. Made of die cast aluminium, SS body, scratch resistance glass and special optics makes these luminaires perfect for creating very defined effects of accent lightwith honeycomb louver. Luminaire body and screwless front ring made from solid billet of 316 grade stainless steel. Silicone seal gasket ensuring IP67 rating, step tempered glass diffuser 4mm thickness. Clear Polycarbonate optical lens. Luminaire hard wired with 3x0.5mm² cable of 1mts length, supplied with mounting sleeve for preparing recessed opening in ground or wall. Safety Class III. Non-integral constant current power supply. Available beam angle 15°, 25° & 40°, Mac Adam step 3 LED, CRI>80, L70-B10-60000h@ Ta 25°C, IK09, IP67. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >85%, power factor >0.9, THD <10%, Surge protection 4KV , Input Voltage 240V ac at 50-60Hz frequency, Operating voltage 100-277V ac with cut-off protection. Available CCT 3000K/4000K/6500K. High luminous efficiency at reduced wattage. Supplied with IP68 rated connector for a secure connection to the network, ABS Plastic outer costing for easy installation. Product should be BIS and CE Certified.

Supply,Installation, Testing and Commissioning of compact and efficient 12W ceiling mounted downlighters. High protection class and lumen output makes it versatile solution. Luminaires made up of die-cast aluminium, aluminium and SS Fasteners, clear tempered glass, silicone gasket , hybrid optics with Lens and reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Cast aluminium plate for surface mounting onto the ceiling, cable entries for through wiring of main supply cable. Integral constant current power supply. Lumen output 150lm/w, Available beam angle 15°, 25° & 40° Mac Adam step 3 LED, CRI>80, L70-B10-60000h@ Ta 25°C, IK07, IP65. Power factor >0.95, THD<10, Surge Protection upto 2.5KV, driver efficiency >85%. Operating Temperature of the luminaire is -15°C~ 50°C, Input Voltage 240V ac at 50-60Hz frequency, Operating voltage 100-277V ac with cut-off protection. Available CCT 3000K/4000K. Product finsih available: Pure polyester powder coated Graphite grey, Anthracite grey, Jet black. Product should be BIS and CE Certified.

Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):- 150 watt LED flood light fixture with integral driver and secondary lens (IP 66):-

Supply installation and commissioning of swaged steel tubular pole as per IS 2713 with base plate of size 300x300x6mm welded at bottom, necessary hole for cable entry and earthing stud welded at specified height including painting with one coat of red oxide zinc chromate primer.12METER

Supply, Installation, Testing and Commisioning of double arm Lighting Pole 4270mm Height. Made out of hot rolled steel grade E250, as per IS 2062:2011 and designed suitably for wind speed upto 50m/s wind conforming to IS 875: PART -3:1987. the square base plate of MS (grade E250) of size 230mmx230mm, 12mm thick and facilitated with 4 elongated slots 38mm x 19mm at CC 180mm to suit the 300mm, J-type, M16 bolts (Grade 4.6). The cable entry hole Ø70mm is provided at the centre of the baseplate. A base compartment for weather proof control box is provided at a height 300mm above the base plate with a die cast door contoured to the poles's shape housing the gear tray, pre-wired with 2.5 Sq.mm cable, Siemens/Anchor make MCB, terminal connectors for loop in loop out arrangement. The surface preparation of the pole & components shall be done by shot blasting which is environmentally safe eliminating the chemical and acid use and ensuring the thorough removal of impurities like rust, oxides and other unwanted particles from the surface for high standard coating. The surface finish of the pole shall be Zinc rich primer coat & pure polyester powder coating providing 60 Microns DFT. Any other wiring/electrical consumables shall be under the scope of purchaser. Product finsih available: Pure polyester powder coated Graphite grey, Anthracite grey, black. Product should be CE Certified.

Supply, Installation, Testing and Commisioning of an elegant and efficient 30W Lantern with translucent diffuser provide a unique comfortable light choice with symmetrical and glare free light distribution. Aesthetically designed sturdy construction ensure a long life against all weather condition, maintaining initial performance through lifetime of installation. The luminaire compromises of specially contoured spun aluminium top cover. The lamp along with control gear is housed inside and covered with a toughened glass diffuser at the top portion of extruded aluminium tube and the bottom portion attached to a mounting base. Lamp compartment encased in non-yellowing clear/ translucent UV stabilised acrylic diffuser. Die cast aluminium spigot base with aluminium alloy of low copper content for effective corrosion resistance. Suitable for mounting on 60mm OD Pipe. Integral constant power supply. Product benefits are elegant, robust design, environmental friendly, moisture proof, insect free, low maintenance cost, reduces glare with minimum delivered lumens of 150lm/W with led life span of L70-B10-60000h@ Ta 25°C Mac Adam step 3 LED, IP54, IK06, CRI≥80, Power factor >0.95, THD<10, Surge Protection upto 4KV, driver efficiency >87%. Operating Temperature of the luminaire is -40°C~ 50°C, Input Voltage 240V ac at 50-60Hz frequency, Operating voltage 100-277V ac with cut-off protection. Available CCT 3000K/4000K/5700K. Product finsih available: Pure polyester powder coated Graphite grey, Anthracite grey, Jet black. Product should be BIS and CE Certified.

Supply, Installation, Testing and Commisioning of 30W LED focus light with dimension Ø166 x 153 x 423mm. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21) Light Distribution Symmetrical Electronic driver ON/OFF. MATERIAL CHARACTERISTICS Extruded aluminium bottom ribbed pipe (grade 6063 with test certificate) Ø166 x 3mm thickness & Die cast aluminium housing (grade ADC12 with test certificate). SS fasteners. Die-cast aluminium mounting plate Ø100.5 x 4mm thick with 2 elongated holes 15 x 10 to suit M8 bolts at PCD 55 with pure polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foudation. Hot dip galvanised foundation bolt. Available beam angle 10°, 28° & 45°, IP rating IP65, Mechanical resistance IK07. Lifespan of the luminaire > 60,000 hours at L70B10. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >85%, power factor >0.9, THD <10%, Surge protection 4KV , Input Voltage 240V ac at 50-60Hz frequency, Operating voltage 100-277V ac with cut-off protection. Available CCT 3000K/4000K/5700K. Product finsih available: Pure polyester powder coated Graphite grey, Anthracite grey, Jet black. Product should be BIS and CE Certified.

Supply, Installation, Testing and Commisioning of 16w environmentally friendly LED garden and pathway luminaires to create a pleasant light distribution with a high degree of visual comfort. Theses luminaires offer shielded glare free illumination on ground surface and are perfect for illuminating entrance, footpaths as well as garden and landscape architecture. Clean lines and pure form are the underlying elements if this series of LED bollards, designed to provide radially symmetric light emission of 360° . Luminaire body made of extruded aluminium alloy (grade 6063) with die cast aluminium components and non corrosive SS fasteners. Reflector system made of spun aluminium (powder coated). Non yellowing UV stabilised acrylic/ polycarbonate diffuser. Silicone gasket. Luminaire supplied with2/3 core cable length and IP67 connector. Mounting plate die cast aluminium double powder coated with an anchorage unit and stainless steel fixing screws. High luminous efficiency at reduced wattage. Elegant and robust design, dark sky compliant protects pedestrians from glare by preventing spill light above the horizontal plane. Cable entries for through wiring of main supply cable. Integral constant current power supply , pre-wired with LED driver and suitable for operating on 240V 50 Hz single phase AC supply. Lumen output 150lm/w, Mac Adam step 3 LED, CRI>80, L70-B10-60000h@ Ta 25°C, IK08, IP65. Power factor >0.95, THD<8, Surge Protection upto 3KV, driver efficiency >87%. Operating Temperature of the luminaire is -15°C~ 50°C, Input Voltage 240V ac at 50-60Hz frequency, Operating voltage 100-277V ac with cut-off protection. Available CCT 3000K/4000K/5700K. Product finsih available: Pure polyester powder coated Graphite grey, Anthracite grey, Jet black. Product should be BIS and CE Certified.

Supply, Installation, Testing and Commisioning of Flexible LED Strip White led color 12Vdc / 24Vdc CRI >80 MacAdam step 3 Input power : 12W Dimension 1000 x 12 mm Beam angle : 120° Electronic driver ON/OFF (External driver) IP rating IP67 MATERIAL CHARACTERISTICS Copper coated flexible strip, Silicone moulded diffuser, End cap LIGHTING PERFORMANCE Silicone moulded diffuser This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire >10,000 hours at 40ｰC. Operating ambient temperature range is from -15ｰC to +50ｰC. Driver efficiency >85%, Surge protection 3KV. Product should be BIS and CE Certified.

Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit including connection etc. as required:- 2 X 1.5 sq mm

Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit including connection etc. as required:- 2 x 2.5 sq. mm

Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit including connection etc. as required:- 4 X 4 sq mm

Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit including connection etc. as required:- 4 X 6 sq mm

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required 300 mm width X 50 mm depth X 1.6 mm thickness

Supply, installation, testing and commissioning of 24-port Gigabyte network Switch having 24 ports of 10/100/1000 Mbps and 2 SFP/SFP+ ports for uplink.

Supply, installation, testing and commissioning of Face Plate 2 Port with back box - White as per the technical specificaton mentioned and as per the requirement & complete in all respect and as directed to the satisfaction of engineer.

Supply, installation, testing and commissioning of CAT6 RJ45 Jack as per the technical specificaton mentioned and as per the requirement & complete in all respect and as directed to the satisfaction of engineer.

Supply, installation, testing and commissioning of CAT6 Patch/Mounting Cord 1 mtrs as per the technical specificaton mentioned and as per the requirement & complete in all respect and as directed to the satisfaction of engineer.

Supply, installation, testing and commissioning of CAT6 Patch/Mounting Cord 2 mtrs as per the technical specificaton mentioned and as per the requirement & complete in all respect and as directed to the satisfaction of engineer.

Supply, installation, testing and commissioning of RJ-45 Keystone for Patch Panel

Supply, installation, testing and commissioning of 24 Port un-loaded Patch Panel including adapters etc. as per the technical specificaton mentioned and as per the requirement & complete in all respect and as directed to the satisfaction of engineer.

Supply, installation, testing and Commissioning of 19" Rack 12 U Wall Mount Rack with all standard accessories that include Cable Manager, Power Bar with sockets etc. as per the requirement & complete in all respect and as directed to the satisfaction of engineer.

Supply, installation, testing and Commissioning of 6 core optical fiber armored cable

Supply, installation, testing and Commissioning of 12 core optical fiber cable

CCTV WORK: 4 MP Bullet Camera - Supply, Installation, Testing and Commisioning of 4MP Bullet weather & dust proof IP based Fixed Lens true day/night Camera (IP67 , IK 10) , 1/3” 4MP PS CMOS Image Sensor,H.265 and H.264 triple-stream encoding, WDR(120dB), Day/Night(ICR), Range of 30-50 Mtrs, UL ,CE FCC Certified

2 MP PTZ Camera - Providing installation testing and commissioning weather & dust proof IP based Dome PTZ (Pan Tilt & Zoom) true day& night camera ,1/2.8” 2MP PS CMOS Image sensor, Max. 50/60fps@1080P,Color: [email protected]; [email protected] (IR on), Powerful 45x (3.95~177.7 mm) Optical and 16x Digital zoom, WDR(120dB), 3D DNR, Day/Night(ICR),Defog, ROI, EIS, AGC, BLC, HLC, Support Starlight Function, Up to 300 presets, auto scan, 8 tour, 5 pattern, auto pan, Tripwire, Intrusion, Abandoned/Missing , Face Detection, Heat Map, IR Range of 200 Mtr., Max 300° /s pan speed, 360° endless pan rotation, Built-in 7/2 alarm in/out,Micro SD card 256GB, IP67, IK10, Support PoE+, UL, CE ,FCC certified

Supply, Installation, Testing and Commissioning of 32 Channel NVR 4 Sata port-Upto 8 TB; 32 Channel IPcamera input, Quad Core embedded Processor and LINUX Embedded; 16 POE; Max 200 Mbps incoming & outgoing bandwidth, Smart H.265/ H.264 codec decoding, Upto 8 MP resolution preview and playback, Frame Rate: 1-15 FPS(8 MP); 1-25/30 fps for rest of Resolutions; Support 4 SATA HDDs up to 8 TB each, 2 USB (1 USB3.0,1 USB2.0), 1HDMI /1 VGA simultaneous video output , Two way talk 1Channel Input, 1Channel Output RCA, 1RJ-45port (10/100/1000Mbps),

Supply, installation, testing and commissioing of 8 Port PoE Switch-10/100/10008 Port with 2 Giga SFP uplink, L2 PoE switch, Power Budget max96 W ,single port 30 W ,AIExtend, AIVLAN

Supply, Installation, Testing and Commisioning of 9U Rack for mounting switches, Patch Panels,. Network rack shall be along with Spike, Fan tray , Cable Manager as required

Supply, installation, testing and commissioing of 6 TB Surveillance HDD

Supply, Installation, Testing and Commisioning of Giga Speed Category 6 Non plenum U/UTP cable, Color state /CAT 6 cable in existing conduit

Supply, Installation, Testing and Commisioning of 3 Meter HDMI cables

Fine dressing the ground

Mixing earth and sludge or farm. yard manure in proportion specified or as directed.

Spreading of sludge, farm.-yard manure or/and good earth in required thickness (Cost of sludge, farm.­yard manure or /and good earth to be paid for separately) (MIN 200 MM LAYER).

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm Thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and then rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of Officer-in-charge

Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farm-yard manure (cost of well decayed farm yard manure to be paid separately)­ in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and liftsHoles 1.2 m dia and 1.2 m deep.

Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farm-yard manure (cost of well decayed farm yard manure to be paid separately)­ in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and liftsHoles 60 cm dia, and 60 cm deep.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Mimusops elengi (Bakul) TOPIARY GLOBULAR WITH HT 2.0M AND 1.2M WIDE,Minimum 3.5m overall ht ,Minimum 100mm caliper,Multibranching at 1.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Ficus infectoria (Payari) ,Minimum 3.0/3.5m overall height,Minimum 60mm caliper, Multibranching at 2.0m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Jasminum grandiflorum (jai)Minimum 1.0/1.5m overall height,Minimum 30mm caliper,Multibranching at 2.0m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.BAMBUSA VULGARIS-GOLDEN BAMBOO,Minimum 3.0/3.5m overall height,Minimum 40mm caliper,Multibranching at 2.0m from collar.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-GARDENIA LATIFOLIA,CAPE JASMINE,,Multibranching at 2.0m from collarMinimum 2.0/2.5m overall height,

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-JACARANDA MIMOSIFOLIA,NEELA GULMOHAR,Minimum 3.0/3.5m overall height,Minimum 60mm caliper,Multibranching at 2.0m from collar.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-PLUMERIA ALBA,FRANGIPANI,Minimum 3.0/3.5m overall height,Minimum 75mm caliper,Multibranching (4-5) branches at 1.5m from collar.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Syzygium cumini (Jambhun),Minimum 3.0/3.5m overall height,Minimum 50mm caliper,Multibranching at 2.0m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Acacia catechu (Khair) ,Minimum 3.0/3.5m overall height,Minimum 75mm caliper,Multibranching at 2.0m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Dendrocalamus Strictus(Velu) (Date Tree),Minimum 3.0/3.5m overall height, 60MM CALIPER, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Butea monosperma (palash),Minimum 3.0/3.5m overall height,Minimum 60mm caliper, Multibranching at 2.0m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Aegle marmelos (Beal),Minimum 3.0/3.5m overall height,Minimum 40mm caliper,Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Terminalia arjuna (Arjun),Minimum 3.5m overall height,Minimum 60mm caliper, Multibranding at 2.00m

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Mimusops elengi (Bakul)Champa,Minimum 3.0/3.5m overall height,Minimum 75mm caliper,Multibranching at 1.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-lagerstroemia spp.,Minimum 3.0/3.5m overall height,Minimum 60mm caliper,Multibranching at 2.0m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Shorea robusta (Ral),Minimum 3.0/3.5m overall height,Minimum 60mm caliper,Multibranching at 2.0m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Anthocephalus cadamba (kadamba),Minimum 3.0/3.5m overall height,Minimum 75mm caliper,Multibranching at 1.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Mangifera indica(Mango),Minimum 3.0/3.5m overall height,Minimum 60mm caliper,Multibranching at 2.0m from collar.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Azardita indica (Neem),Minimum 3.0/3.5m overall height,Minimum 60mm caliper,Multibranching at 2.0m from collar

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-GOLDEN BOTTLE BRUSH ,Minimum 1500mm height@300mmc/c,Bushy, Multibranching.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-COCHLOSPERMUM RELIGIOSUM,Minimum 3.0/3.5m overall height,Minimum 40mm caliper,Multibranching at 2.0m from collar.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ERYTHRINA INDICA,Minimum 3.0/3.5m overall height,Multibranching at 2.5m from collar, min. 60m Caliper.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-FICUS BENJAMINA,Minimum 2.0/2.5m overall height,Minimum 40mm caliper,Multibranching at 2.0m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-PLUMERIA RUBRA,RED Champa,Minimum 3.0/3.5m overall height,Minimum 75mm caliper,Multibranching (4-5) branches at 1.5m from collar.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting ALSTONIA SCHOLARIS Minimum 3.5/4.0m overall height,Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting BAUHINIA BLACKEANA (KACHNAR), Minimum 3.5/4.0m overall height, Minimum 55-60mm caliper, Multibranching at 2.0m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting BAUHINIA PURPUREA (KACHNAR PURPLE) Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting CASSIA FISTULA (AMALTAS) Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting ARTOCARPUS LACUCHA (FLOS SILK TREE) Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting DELONIX REGIA (GULMOHAR ) Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting NYCANTHES ARBORTRISTIS Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting PTROSPERMUM ACERIFOLIUM . KANAKCHAMPA Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting SCHLEICHERA OLEOSA Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting TABEBUIA ARGENTEA Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting ANOGEISSUS PENDULA Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting FOX TAIL PALM,Minimum 3.5m overall height, Minimum 100mm caliper,5 fronds.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting ARECA PALM-SUPARI,Minimum 5 canes per palm

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting CYCUS REVOLUTA,FERN SAGO,Minimum 0.6 M trunk height, Minimum 3 whorls with 15 leaves each.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting LATANIA LONTAROIDES,Minimum 2.5m overall height, Minimum 100mm caliper,5 fronds.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting PHEONIX PALM,DATE PALM,Minimum 2.5m overall height, Minimum 100mm caliper,min. 8 fronds

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting CHAMPANGE PALM,Minimum 1.5m overall height, Minimum 150mm caliper,5 fronds.

Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting LIVISTONIA ROTUNDIFOLIA, Minimum 1.5m overall height, Minimum 100mm caliper,5 fronds.

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ACALYPHA HISIPIDA CAT TAIL,Minimum 600mm height@900mmc/c,Bushy, Multibranching, Flowering.

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ACALYPHA W GREEN,Minimum 600mm height@750mmc/c,Bushy, Multibranching.

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ACALYPHA W RED,Minimum 600mm height@750mmc/c,Bushy, Multibranching

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ACALYPHA TRICOLUR,Minimum 600mm height@750mmc/c,Bushy, Multibranching

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ALLAMANDA NERIFOLIA,Minimum 900mm height@900mmc/c,Bushy, Multibranching, Flowering

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-CALLIANDRA EMARGINATA,Minimum 900mm height@900mmc/c,Bushy, Multibranching, Flowering

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-CASSIA BIFLORA,Minimum 900mm height@900mmc/c,Bushy, Multibranching, Flowering

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Nerium oleander 'Petite Pink' Dwarf Pink , Minimum 900mm height@750mmc/c,Bushy, Multibranching, Flowering

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-HAMELIA PATTENS,Minimum 1500mm height@900mmc/c,Bushy, Multibranching

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-JASMINUM HUMILE,Minimum 900mm height@600mmc/c,Bushy, Multibranching, Flowering

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-TABERNAEMONTANA CORONERIA,Minimum 600mm height@600mmc/c,Bushy, Multibranching, Flowering

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-TABERNAEMONTANA CORONERIA VARIEGATED,Minimum 600mm height@600mmc/c,Bushy, Multibranching, Flowering

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-Hibiscus Rosasinium Cooperii Minimum 600mm height @600mmc/c,Bushy

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ERANTHEMUM BICOLOUR,Minimum 600mm height@750mmc/c,Bushy, Multibranching

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-ERANTHEMUM TRICOLOR,Minimum 600mm height@750mmc/c,Bushy, Multibranching

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-FICUS NUDA,Minimum 1200mm height@1500mmc/c,Bushy, Multibranching

Supply & Install Shrubs inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-FICUS PANDA,Minimum 600mm Height@900mmc/c, Bushy, Multibranching, Flowering

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-HELLICONIA METTALICA,Minimum 150mm height @200mmc/c,bushy

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-RESSULIA JUNCEA,Minimum 600mm height @200mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-HELLICONIA HUMILIS,Minimum 300mm height @600mmc/c,Minimum 3 runners per plant

Supply & Install gound covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ALTERNENTHERA RED,Minimum 150mm height @200mmc/c,Bushy.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ALTERNENTHERA SNOW TOP,Minimum 150mm height @200mmc/c,Bushy.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ASPARAGUS DENSIFLORUS,Minimum 150mm height @200mmc/c.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ASPARAGUS SPRENGERI,Minimum 300mm height @200mmc/c,Minimum 3 runners per plant.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CALADIUM HORTULANUM SPP MIX,Minimum 150mm height @200mmc/c,Minimum 3 runners per plant.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CHLOROPHYTUM COSMOSUM,Minimum 150mm height @200mmc/c,Minimum 3 runners per plant.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-NEPHROLEPIS BISERATUM FURCANS,Minimum 300mm height @200mmc/cMinimum 3 runners per plant,Minimum 300mm height @200mmc/c,Minimum 3 runners per plant.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-OPHIOPOGON BLACK GRASS.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-SYNGONIUM MACROPHYLLUM,Minimum 150mm height @200mmc/cMinimum 3 runners per plant.

Supply &Install ground covers/ Shade Minimum 150mm height @200mmc/cplants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-SYNGONIUM PODOPHYLLUM VARIEGATUM,Minimum 3 runners per plant.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-WEDELIA TRILOBATA,Minimum 3 runners per plant,Minimum 150mm height @200mmc/c.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ZEBRINA PENDULA,Minimum 300mm height @250mmc/c,Minimum 3 runners per plant.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-SHADE PLANTS,AGLOENEMA COMMUTATUM,Minimum 300mm height @300mmc/c,Bushy.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ASPARAGUS MYERS,Minimum 150mm height @200mmc/c,Minimum 3 runners per plant.

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-OPHIOPOGON JABURAN VAREIGATA, Minimum 200mm height @200mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-OPHIOPOGON JAPONICUS,Minimum 450mm height @900mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-SPATHEPHYLUM CLEVELANDI,Minimum 200mm height @200mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CHLOROPHYTUM LAXUM, Minimum 200mm height @200mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CHLOROPHYTUM COSMOSUM MILKY WAY,Minimum 200mm height @200mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CHLOROPHYTUM COSMOSOM VITTATUM, Minimum 200mm height @200mmc/c,Minimum 3 runners per plant

Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-TRADESCANTIA ALBIFLORA,Minimum 200mm height @200mmc/c,Minimum 3 runners per plant

Supply & Install plants to form hedge , inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-MURRAYA EXOTICA,Minimum 300mm height @300mmc/c,Bushy

Supply & Install plants to form hedge inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CLERODENRON MACROSIPHON,Minimum 350mm height @200mmc/c,Bushy

Supply & Install plants to form hedge inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-PHYLANTHUS NIVOSIS,Minimum 300mm height @200mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-BOUGANVILLA PINK,Minimum 450 mm height @300mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-DURANTA GOLDEN PLUMERI Minimum 300mm height @200mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-CLERODENDRON INERME,Minimum 300 mm height @200mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.LOROPETALUM CHINENSIS Minimum 450mm height @450mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-TECOMA CAPENSIS Minimum 150mm height @200mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ACALYPHA WILKENSIANA RED Minimum 300mm height @300mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ERANTHEMUM BICOLOUR Minimum 450mm height @450mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-RAPHIS EXELSA Minimum450 mm height @450mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-ACALYPHA WILKENSIANA GREEN Minimum 300mm height @300mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-TABERNAEMONTANA CORONERIA VARIEGATTED Minimum 450 mm height @450mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-HEMELIA PATENS Minimum 450mm height @450mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-MURRAYA PANICULATA Minimum 300 mm height @300mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-FICUS LONGISLAND Minimum 150mm height @200mmc/c,Bushy

Supply & Install plants to form hedge, inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-FICUS PANDA Minimum 300 mm height @200mmc/c,Bushy

Supplying at site of work well-decayed farm.-yard manure, from any available source, approved by the Engineer-in-charge including screening and stacking.

Supplying site of work-Deoiled Neem-Cake duly packed in used bags

Supplying at site of work sludge duly stacked at site.

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. Cyperus Compressus (POORLAND FLAT SEDGE) Minimum 300mm height Clumps ( 8/10)

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. Cyperus Scariosus (UMBRELLA SEDGE) Minimum 500mm height Bushy (4-5) Stems in one clump

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. Arundo Donax ( GIANT REED) Minimum 1000mm height, 10m Caliper Bushy

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. Arundinella Pumila (DWARF REED GRASS) Minimum 200mm height

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. Chloris Barbata (Swollen Finger Grass) Minimum 450mm height, Clumps 6/8 nos.

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. Dendrocalamus Asper (ROUGH GIANT BAMBOO), Minimum 2.5m height, 150 Dia

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. Muhlenbergia Capillaris (PINK MIST GRASS) Minimum 450mm height, 8/10 Shoot one Clump

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. Pennisetum Hohenackeri (FOUNTAIN GRASS) , Minimum 900mm height, 25/30 Shoots

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. Pennisetum Setaceum (AFRICAN FOUNTAIN GRASS), Minimum 900mm height, Symetrical Clumps of 40/50 Arching leaves

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. Phragmites Karka (TALL REED NARKUL), Minimum 1.0 m height, Grass of clumps leaf blades 30 cm long 10 cm wide.

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. Saccharum Spontaneum (KANS GRASS), Minimum 1.0 m height, 8/10 Shoots in one clump

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. Saccharum Munja (Sarkanda), Minimum 1.0 m height, 8/10 Shoots in one clump.

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. ,Bambusa Wamin (Buddha Belly Bamboo), Minimum 1.8 m height, Clumps of 2/3 Stems.

Supply & Install Grasses inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting. ,Cymbopogon Citratus (Lemon Grass), Minimum 600mm height, Clumps of 20/25 Grass Shoots.

Supply, Installation, Testing and Commissioning of following Mechanical, Electrical and Plumbing Equipments and other miscellaneous items for Swimming Pool

Filters: Bobbin Wound Horizontal filter,1200mm diameter. Filtration velocity 30m³/hr/m². Max. working pressure : 2.5 kg/cm². Flow rate : 59m³/hr. Outlet: 140mm. Filter Length-1900mm, a) Maximum operatin temperature 50 degree centigrade. b) Comply with European standards for pressure vessels 97/23/CE included in section 3 of article 3. c) Hydraulic pressure test 1.50 times the maximum admissible pressure. d) Resistance and thickness calculations are basd on norms BS-4994 and AD merkblatt N1. e) characterisctics of internal components as follows: - i) internal components and pipe in PVC. ii) PP laterls with 0.30 Slots. iii) Bolts, nuts and washers is AISI-316 iv) EPDM seals and gaskets complete all as specified and Filters are designated official products of FINA with certificate

Active Clear Glass Media • More efficient and environmentally friendly filtration. • Greater filtration capacity. • Water and energy savings. • Cleaner filter bed as bacteria does not remain trapped and fewer chemical products are needed

Valve Battery Supply, Installation, Testing & Commissioning of Valve Battery Manifold made in PVC with flanges for connecting to filters as per DIN 2501 standards. Consists of set of 5 - buttterfly valves for carrying out filtration, back-washing, rinsing and shut down of the filters .etc., complete . Size : 140mm. DIN-2501 standard.

Valve Battery Supports: Supply, Installation, Testing & Commissioning of Valve battery supports made in Zinc Plated Steel ..etc., complete , Height : 2.30m

Support Brackets 2 Support Brackets with anti-vortex clamps and fixing screws

Re-circulating Pumps Supply, Installation, Testing & Commissioning of Cast Iron Pumps 3000 r.p.m. Mechanical Seal in Stainless Steel. I.P.-54 motor protection. Stainless steel AISI-420 shaft with stainless steel AISI-316 strainer basket. Conn. PN-16 according to DIN2501. Flowrate : 60m3/h @ 12m.head. 5.5 HP Voltage 400V/ 3 ph.etc., complete. (1 working and 1 standby).

Membrane Dosing Pumps: Electronic dosing pump to be mounted both on its base as well as hung on the wall. Pumps following CE regulations, IP- 65 protection. Power connections : 220/240V, 50/60 Hz. The materials in contact with liquid are : Ploypropylene,Viton, Teflon and PVC. Includes anti-acid plastic case. Operating panel protection provided by a transparent polycarbonate cover. Lubrication not required. Flow 20L/hr @ 5 bar

Chemical Storage Tanks: Supply, Installation, Testing & Commissioning of Semi transparent polyethelene tank with external scale so that levels can be checked easily, capacity of tank 500lts .etc., complete

Supply, Installation, Testing & Commissioning of Agitators for easy installation in the tanks, provided with steering grip in bakelite, rod and propellor arms in PVC .. length of stirring rod 900mm. etc., complete

Agitators: Supply, Installation, Testing & Commissioning of Agitators for easy installation in the tanks, provided with steering grip in bakelite, rod and propellor arms in PVC .. length of stirring rod 900mm. etc., complete

UV system with minimum 60 m3/h with onfiguration, low pressure UV lamps powered by magnestic ballast housed within a separate wall mounted panel. The lamp power shall be adjusted from the control panel and when the pool is not in use the lamp output shall be set to low. The UV reactor incorporates a automatic wiper system which shall allow cleaning of the internal thimble housing the UV lamp. The reactor vessel shall be in SS 316 L and flanges shall conform to BS 4504, lamp shall be made of high purity quartz. The wiper ring shall be spring loaded PTFE. The system shall also incorporate lamp replacement indicator and lamp failure alarm. As an option the system shall also incorporate UV intensity meter.

Pool Drains : Supply, Installation, Testing & Commissioning of Drain grille. Stainless steels grille with screws, 500 mm x 500 mm in AISI 304.EN 13451 Standard Max. recommended flow 43 m3/h (0,5 m/s).etc., complete.

Suction Inlet <Vacuum Point>: Supply, Installation, Testing & Commissioning of Suction inlet in ABS with cap internal thread of 1 1/2" dia and external thread 2" .etc., complete

PVC wall conduits: Supply, Installation, Testing & Commissioning of PVC wall conduits 300mm long. Rear connection to pipe by 2" .etc., complete

Inlets: Supply, Installation, Testing & Commissioning of White ABS plastic bottom inlet for concrete with S.S. screws and regulable .Flow/ inlet = 9,000 l/hr. EN-13451-1 Standard.etc., complete

Overflow Gutter Drains: Supply, Installation, Testing & Commissioning of drain fitting with body grille in ABS

Ladders: Supply, Installation, Testing & Commissioning of Ladder of width 500 mm with Ø 43 handrails in hand polished AISI-316 stainless steel. Complete with fixing anchors and earth connection. With added top double safety step and increased overall height in accordance with EN 13451-2Standard. Includes non-slip LUXE steps in AISI-316 stainless steel. 3 Steps. etc., Complete.

Underwater Lights: Supply, Installation, Testing & Commissioning of Led 36W light with Niche and ABS/SS 316 Faceplate

Underwater Lights: Supply, Installation, Testing & Commissioning of Led 18W light with Niche and ABS/SS 316 Faceplate

Junction Boxes: Supply, Installation, Testing & Commissioning of Junction Boxes, made in ABS, composed of 3 entries 3/4" .UNE 20324 : 1993 +1a MOD:2000(EQV a EN 60529:1991 + ERRATUM + A1:2000)+ERRATUM:2004.etc., complete

Flexible Cable Conduits: Supply, Installation, Testing & Commissioning of Cable Conduit Hose, Flexible 1 mt. long conduit for connecting light to junction box. 3/4" .etc., complete.

Transformers/power supply for light: Transformers with IP 64 protection, 300VA from 220V to 12V

Supply, Installation, Testing and Commissioning of Ball Valve of dia 63 mm

Supply, Installation, Testing and Commissioning of Butterfly Valve Dia of 90 mm

Supply, Installation, Testing and Commissioning of Flange and Adaptor for 90 mm dia Butterfly Valve.

Supply, Installation, Testing and Commissioning of Butterfly Valve of Dia 110 mm

Supply, Installation, Testing and Commissioning of Flange and Adaptor for 110 mm dia Butterfly Valve. .

Supply, Installation, Testing and Commissioning of Butterfly Valve Dia 160 mm

Supply, Installation, Testing and Commissioning of Flange and Adaptor for 160 mm dia Butterfly Valve.

Supply, Installation, Testing and Commissioning of Wafer Check Valve of Dia 90 mm

Supply, Installation, Testing and Commissioning of Wafer Check Valve of Dia 160 mm

Supply, Installation, Testing & Commissioning of Metallic vaccum head in polished Al and chrome bronze - 1.5" length 442mm.

Supply, Installation, Testing & Commissioning of Extensible handles for cleaning attachments in anodized aluminium which can be adapted to the entire range of cleaning equipment, brushes, leaf, skimmers and scoops.10.0mts. Long with Handle adaptor .

Supply, Installation, Testing & Commissioning of Transparent blue plastic vacuum hose 11/2" dia 30mtrs long including hose cuffs for connection to suction inlets .etc., complete.

Supply, Installation, Testing & Commissioning of Deep bag net made in polypropelene and white polyester netting, Shark Series.etc., complete

Supply, Installation, Testing & Commissioning of Surface net made in polypropelene and white

Supply, Installation, Testing & Commissioning of Curved brushes made in polypropelene for pool

Supply, Installation, Testing & Commissioning of Straight brushes made in polypropelene for pool .

Supply, Installation, Testing & Commissioning of Algae brushes with stainless steel bristles .etc., complete

Supply of Test kit for free chlorine & pH

Supply of Chlorine Testing Tablets - 250 nos. in a pack

Supply of Phenol (pH) reagent-250 Tablets

Supply of pH increasing chemical compound for swimming pool

Supply of pH decreasing chemical compound for swimming pool

Supply of Algaecide

Supply of TCCA Granules

Supply, Installation, Testing & Commissioning of 63 mm dia UPVC pipe 10 kg/sqcm including fittings where required e.g. tees, bends. etc., complete. EN 1452 Standard

Supply, Installation, Testing & Commissioning of 90 mm dia UPVC pipe 10 kg/sqcm including fittings where required e.g. tees, bends. etc., complete. EN 1452 Standard

Supply, Installation, Testing & Commissioning of 110 mm dia UPVC pipe 10 kg/sqcm including fittings where required e.g. tees, bends. etc., complete. EN 1452 Standard

Supply, Installation, Testing & Commissioning of 140 mm dia UPVC pipe 10 kg/sqcm including fittings where required e.g. tees, bends. etc., complete. EN 1452 Standard

Supply, Installation, Testing & Commissioning of 160 mm dia UPVC pipe 10 kg/sqcm including fittings where required e.g. tees, bends. etc., complete. EN 1452 Standard

Supply, Installation, Testing & Commissioning of 4x2.5 mm2 Copper cable for under water light from Junction box to Electrical panel of U/W Light, complete with Conduit.

Supply, Installation, Testing & Commissioning of 3x4 mm2 Copper cable for under water light from Junction box to Electrical panel of U/W Light, complete with Conduit.

Supply, Installation, Testing and Commissioning of Passenger Elevator with max capacity of 6 persons and Max Load of 408 kg, with Doors openable on Both Sides complete as per specifications and instructions of Engineer-in-Charge.

Designing, providing, installing and fixing factory finished custom designed cold form Steel Framed super structure for Standard type Cottages of 87 sqm area, comprising of steel wall panel, trusses, purlins etc manufactured out of Minimum 0.75 mm thick steel, including windows and flush doors, pine wood cladding and panelling on both interior and exterior walls of the building, as per drawings, specifications and instructions of Engineer-in-Charge.

Designing, providing, installing and fixing factory finished custom designed cold form Steel Framed super structure for Delux type Cottages of 122 sqm area, comprising of steel wall panel, trusses, purlins etc manufactured out of Minimum 0.75 mm thick steel, including windows and flush doors, pine wood cladding and panelling on both interior and exterior walls of the building, as per drawings, specifications and instructions of Engineer-in-Charge.

Designing, providing, installing and fixing factory finished custom designed cold form Steel Framed super structure for Suites of 86 sqm area, comprising of steel wall panel, trusses, purlins etc manufactured out of Minimum 0.75 mm thick steel, including windows and flush doors, pine wood cladding and panelling on both interior and exterior walls of the building, as per drawings, specifications and instructions of Engineer-in-Charge.

Supply, Installation, Testing and Commisioning of Passenger lift of 408 Kg Max Load and capacity of 6 person, including all civil,electrical, mechanical and all related works complete as per specifications and instructions of Engineer-in-Charge.

Supply and Installation of Benches with Painted MS Frame and Wooden Body as per specification and approval of Engineer-in-Charge

Supply and placing of Wheel Dust Bin of 1100 Ltr Capacity as per the instruction of Engineer-in-Charge

Supply and placing of Pole Top Swing Lid Dustbins of 44 Ltr Capacity as per the instruction of Engineer-in-Charge

Supply and Installation of Mild Steel Gazebo of size 12' X 12' as per specification and approval of Engineer-in-Charge

Supply, Installation, Testing and Commissioning Water ATM and including electrical and mechanical connection to existing/provided water supply arrangement and accessories all complete as per specifications and instruction of Engineer-in-Charge.

Supply, Installation and Commissioning of Fully Automatic Electro-mechanically operated Organic Waste Composting machine capable of handling 629.55 kg/ day of with Duel shaft 3HP shredder 12-month warranty from the date of supply for parts against manufacturing defect as per instruction and approval of Engineer-in-charge.

Supply, Installation, Commisioning and Testing of Package Sewage Treatment Plant of 15 KLD Capacity as per specification and approval of Engineer-in-charge.

Supply, Installation, Commisioning and Testing of Package Sewage Treatment Plant of 10 KLD Capacity as per specification and approval of Engineer-in-charge.

Supply, Installation, Commisioning and Testing of Package Sewage Treatment Plant of 8 KLD Capacity as per specification and approval of Engineer-in-charge.

Supply, Installation, Commisioning and Testing of Package Sewage Treatment Plant of 2.5 KLD Capacity as per specification and approval of Engineer-in-charge.

Supply and Installation of Self Priming, Single Phase 2.5 HP Centrifugal type Monoblock Pump to transfer water from ground level reservoir to roof top tank including electrical and mechanical connections and accessories all complete as per instructions and approval of Engineer-in-charge.

Supply and Installation of 0.5 HP Monoblock Pump for using recycled water from STP for irrigation including electrical and mechanical connections and accessories all complete as per instructions and approval of Engineer-in-charge.

Supply and Installation of Tensile Walkway Canopy in fabricated MS structureas as per specification and approval of Engineer-in-Charge

Supply and Providing Cusioned Chairs with Steel Frame

Supply and Installation of Paintings - 2 x 1.2m - Portrait

Supply and Installation of Paintings - 1.5 x 3 m - Landscape

Supply and Providing Circular Table with 4 Chairs - Set

Supply and Providing Race Treadmill -

Supply and Providing Multi Gym Equipment

Supply and Providing Stationary bicycle

Supply and Providing Dumbells -

Supply and Providing 3 Burner Cooking Stove -

Supply and Providing SS Working Table Type 1

Supply and Providing 3 Bowl Kitchen Sink -

Supply and Providing GI Hood Kitchen Exhaust with Filter -

Supply and Providing Gi hood Duct Line

Supply and Providing SS Working Table Type 2

Supply and Providing 5 HP Exhaust Fan

Supply and Providing SS Kitchen Rack

Supply and Providing Double Door Cooler of 850 Litre Capacity

Supply and Providing Double Door Deep Freezer of 320 Litre Capacity

Supply and Providing Terracotta Statues

Supply and Providing Single Door 45L Mini Fridge

Fencing With Welded Steel Wire Fabric 75 mm x 50 mm- Providing 1.20 metre high fencing with angle iron posts 50 mm x 50 mm x 6 mm at 3 metre center to center with 0.40 metre embedded in M15 grade cement concrete, corner, end and every 10th post to be strutted, provided with welded steel wire fabric of 75 mm x 50 mm mesh or 75 mm x 25 mm mesh and fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all respects.

G.I Barbed Wire Fencing 1.8 Metre High- Providing and fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per MoRT&H Technical Specification clause 807.

Dayworks

Labour

Beldar

Skilled Labourer

Un skilled Labourer

Joiner & Carpenter

Welder

Steel Fixer

Steel Erector

Bricklayer

Pipe layer

Motor Driver

Plant Operator

Electrician

Cable Jointer

Fitter

Painter

Plumber

Watchman

Crane Operator

Equipments with Operator/Driver, Fuel, Equipments and Tools.

Backhoe excavator

8t/10t Road roller

Dumper truck (10 t)

Mobile crane (10 t)

Concrete pump

Compressor (including all tools)

Welding set (including consumables)

Gas cutting set (including consumables)

Diesel generator (5 kVA)

Pump (100 mm)

Pump (150 mm)

Concrete mixer (0.25 cu.m)

Concrete Vibrator

10 Ton Capacity movable Crane

20 Ton Capacity movable Crane

Mecgale Pneumatics Pvt. Ltd.

US Dollar

European Euro

Japanese yen