PROVN OF FLAME PROOF LIGHTS AND FLAME PROOF EXHAUST FAN IN POL STORE IMPROVEMENT OF CERTAIN EM WORKS SERVICES TO CERTAIN LIVING IN BILLETS OF CPL BELOW SPL REPAIR REPLACEMENT OF UNSERVICEABLE GEYSERS AND AIR CIRCULATORS SPL REPAIR WITH REPLA

Amount

M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 Volts grade (ZHFR) Zero Halogen Flame Retardant Smoke Free, Non-Toxic, Non-Corrosive Electric Cable with multi stranded copper conductor of size 1.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia ERW stove neameled surface type including all flame proof conduit fittings and accessories such as tees, junction boxes, bends, duly tested by CMRI Dhanbad suitable for one light/ fan point controlled by one flame proof rotary switch SP one way and including drawing continuous earth wire PVC insulated unsheathed 1100 V grade (ZHFR) Zero Halogen Flame Retardant Smoke Free, Non-Toxic, Non-Corrosive Electric Cable with stranded copper conductor of size 1.5 Sqmm and connected to earth dolly complete all as specified and as directed.

S&F flame proof weather proof for installation in hazardous area as per IS-2148/ 81/ LED Tube light fitting epoxy powder coated with provision of cable glands duly tested and certified by CMRI Dhanbad suitable for and including 16 Watt LED Tube made out of cast iron aluminium alloy LM-6 enclosure with clear heat resistant borocilicate glass tubing spring loaded non sparking bipin lamp holder built in control gear fitted with copper wound ballast condenser starter all accessories prewired including 02 Nos M-20 cable entries mounted on wall/ column steel structure complete all as specified and directed. Make :- Flexpro Cat Part No MFF/ S//1X40 or Crompton Greaves Cat Part No EXTN1 LT8-16/20 of equivalent of make Sudhir/ Balinga/ Shyam.

S&F Flame Proof Exhaust Fan 305mm sweep, 1440 RPM for speed complete with louvers including cutting chases for fixing fan, alongwith fixing arrangement on wall and connecting electrically using 3 Core 1.0 Sqmm PVC insulated FRLS flexible copper conductor cable overall sheathed drawn through flame proof flexible conduit all as required at site with connected accessories etc complete all as specified and as directed. Make :- Sudhir Cat Part No EF/140 or equivalent of make Crompton, Shyaam, Baliga.

S&F Flame proof weather proof direct entry type rotary switch single pole ON and OFF rotary motion switch in cast aluminium alloy LM-6 enclosure epoxy powder coated single pole 230 Volt 10 Amp AC ON/OFF switch operated externally by knob having two nos of M-20 cable entries earthing terminal suitable for mounting on wall/ steel structure etc duly tested and certfified by CMRI Dhanbad complete all as specified and directed. Make :- Flexpro/ Sudhir/ Balinga/ Shyam/ Bajaj/ CG

S&F for flush mounting factory made SPN DBs Double door, IP-43 protection with metal door with neutral busbar, earth bar cables ties for cable management fully insulated 200 Amp busbar 4 Way etc complete all as specified and as directed.

S&F MCB Single pole and neutral, 240 Volts, 40 Amps, breaking capacity, 10 KA, 'C' series etc complete all specified and as directed.

S&F MCB single pole, 240 Volts, 6 to 32 Amps, breaking capacity, 10 KA, 'C' series etc complete all specified and as directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sq mm 2 core complete all specified and as directed. Note:- Excavation, earth work and protection of cable shall be measured and paid seperately under respective items of BOQ.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out in soft/loose soil all as required for laying of cables complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated material (Soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

M&L for dry sand cushioning for protection of under ground cables (8cm before laying the cable and 15cm after laying the cable in trenches) complete all as specified and directed. Note:- Only punned thickness shall be measured and paid.

M&L for Well burnt Sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, length of brick equal to width of brick, complete all as specified and directed.

Supply and laying 25mm bore light grade ISI marked GI tubing with fittings, laid in trenches or inserting in horizontal boring for cable protection including fixing with MS Clamp and nut, bolts etc complete all as specified and as directed.

M&L for Point Wiring for one light or fan point controlled by one way switch complete with 1.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn in and including on surface non-metallic rigid PVC conduit medium grade as required at site, with all fittings (ISI Marked) not less than 20 mm external dia but shall be increased as per actual site reqmt in accordance with clause no 19.125 of SSR part I fixed on surface in wall / cubicle/ ceiling etc including 1.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade as earth continuity wire including MS sunken pressed steel terminal of suitable size, made of sheet 1.6mm thick with 3.0 mm thick bakelite sheet top cover complete all as specified and as directed.

Description all as per srl item No. 15.00 here-in-above but for 3 pin socket outlet 5/6 amps on independent board complete all as specified and as directed.

M&L for Point Wiring for one 3 pin 15/16 amp socket outlet on independent board complete with 2.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn in and including on surface non-metallic rigid PVC conduit medium grade, not less than 20 mm external dia but shall be increased as per actual site reqmt in accordance with clause no 19.125 of SSR part I fixed concealed / recessed in wall / ceiling etc including 2.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts gradeas earth continuity wire including MS sunken pressed steel terminal of suitable size, made of sheet 1.6mm thick with 3.0 mm thick bakelite sheet top cover complete all as specified and as directed. Note for srl item no. 15 to 17:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.

S&F switch piano flush type single pole one way 5/6 Amp complete all as specified and directed. Make :- Anchor, ABB, Havells

S&F socket outlet 2 in 1, 3 pin, 5/6 Amp flush type complete all as specified and directed. Make :- Anchor, ABB, Havells

S&F switch piano flush type single pole one way, 15/16 Amp complete all as specified and directed. Make :- Anchor, ABB, Havells

S&F socket outlet 2 in 1, 3 pin, 5/6 & 15/16 Amp flush type complete all as specified and directed. Make :- Anchor, ABB, Havells

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all specified and as directed.

Taking down old sub main copper/aluminium cable of various sizes from existing conduit/ batten complete all specified and as directed.

Taking down old MCB DBs/ main switches off size complete all as specified and as directed.

Taking down existing LED Tube light/Mirror light fitting of any type along with clamps without any damage and keep in safe custody with and including re-fixing the fittings in serviceable conditions at same location after necessary re-wiring /repairs as required complete all as specified and as directed.

S&F angle holder, insulated body with back plate with & including LED Lamp 9 Watt suitable for batten fittings complete all as specified and as directed. Make :- Anchor, Havells

Disconnecting and taking down existing exhaust fan of any sweep with louver and M&L for spraying and painting of exhaust fan with synthetic enamel paint including scrapping, filling cavities with filler, including repair work, rewinding if any, refixing exhaust fan and reconnecting electrically with 3 core 23/0.00076 PVC flexible cable from ceiling rose to exhaust fan including testing etc complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with blades, frame and louvers including cutting holes in wall for fixing fan, connecting electrically using 3 Core 0.5 Sqmm PVC insulated FRLS flexible copper conductor cable overall sheathed with connected accessories etc complete all as specified and as directed. Note :- Unserviceable Exhaust fan shall be deposited in MES Store yard. Make :- Usha/Havells/Crompton

Taking down and dismantling Geyser of any make and capacity 25 Ltrs to 50 Ltrs & taking out assembly removing glass wool and taking out the copper inner tank for descaling, welding / brazing of detecting the leakage, heating element, thermostat, replacing and refixing the same after making it functional including replacement of worn out nuts, bolts, washers, element etc complete all as specified and as directed. Note :- (a) The cost of welding / soldering material, nut - bolts, washers as required and transportation charges shall deemed to be included in the unit rate. (b) T&P as required shall be provided by the contractor and cost thereof deemed to be included in the quoted rate.

Taking down unserviceable water heater and S&F electric water heater (geyser), storage type steel body with glass tinted inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection pipe etc & electric supply connection complete over and including grouting nuts & bolts of 15 mm dia 100 mm long for hanging the geysers, incl PVC connection pipe15mm dia, 450mm long heavy duty suitable for hot & cold water connections complete and making good plastering and finishing of plastered surface of wall as per existing finish complete all as specified and as directed. Note :- Unserviceable water heater shall be deposited in MES Store yard. Make: AO Smith Model No HeatBot-SZS-025-DG-Silver Storage 25 Litre Vertical Type, Havells Model No Adonia R Storage R 25 Litre, Usha Model No Usha Aquerra DG 25 Litre 5 Star Digital Storage Water Heater, Racold Model No Racold Omnis Lux 25 Litres Storage Water Heater.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with a single pole MCB 20 Amps complete in sheet metal enclosure with taking down of existing enclosure complete all specified and as directed.

S & F of 1100 volts grade heavy duty two single core 4 Sqmm size (Nominal Area) PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 4 Sqmm size (Nominal size) stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. Note:- (a) Two single core cable alongwith one single core of earth wire and PVC conduit shall be measured and paid as one unit length. (b) M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar (1:3) and finishing with existing finishes shall be deemed to be included in the quoted rate.

S & F factory made VTPN DBs-DPX-160 MCCB DB's, IP-43 protection-IK09 with metal door with 160 Amps copper busbar with 2 neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of DPX 160 MCCB and incomer and SP/TP MCB's as outgoing 8 way etc complete all as specified and as directed. Make :- Legrand Cat part No. 5077 50/52 DPX³ 160+24, 8 Way or equivalent in Siemens, ABB, Schneider

S&F MCCB 125 Amp, 415 volts, 4 pole, Thermal magnetic release for line protection etc complete all as specified and as directed. Make :- Legrand, ABB, Schneider

S&F for flush mounting factory made TPN DBs Double door, 415 volts, IP-43 protection - IK 09 protection with metal door with neutral busbar and neutral link, earth bar cables ties for cable management fully insulated busbar 4 Way etc complete all as specified and as directed. Make :- Legrand, ABB, Schneider.

S&F MCB triple pole and neutral, 415 Volts, 63 Amps, breaking capacity, 10 KA, 'C' series etc complete all as specified and as directed. Make :- Legrand, ABB, Schneider

S&F flush mounting factory made Ekinoxe SPN DB's Double door, IP-43 Protection, IK-09 with metal door, with neutral bar, Earth bar and cables ties for cable management fully insulated bus bar 12 way with 200 Amps rated bus bar complete all as specified and as directed. Make :- Legrand, ABB, Schneider

Supply, laying & testing of LT cable XLPE insulated, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts, grade cross sectional area 35 Sqmm 3.5 core including taking out of existing unserviceable cable complete all as specified and as directed. Note:- Excavation, earthwork and cable protection shall be measured and paid seperately.

Supply and laying 50mm bore light grade ISI marked GI tubing with fittings, laid in trenches or inserting in horizontal boring for cable protection including fixing with MS Clamp and nut, bolts etc complete all as specified and as directed.

S&F ceiling rose, surface bakelite, (65 x 50)mm, three terminals complete all as specified and as directed.

M & L for making horizontal hole by mechanical boring under hard standing, pavements or roads for insertion of GI pipes 40 to 80 mm bore and making good the disturbed surface complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL as protection pipe, excavation and earth work charcoal dust, common salt, PCC (1:3:6) type C-1 chamber with cover and RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia PGI funnel and wire mesh all as shown in electrical plate No 3 of SSR Part-I connected to earthing test point complete all as specified or indicated including testing on completion complete all as specified and as directed. Note:- Existing earthing shall be demolished and taking out materials retrieved and taken into credit. Rate of taking out shall be deemed to be included in unit rate.

S&F Air Circulator fans 230 volts single phase oscillating type, 600 mm sweep suitable for wall mounting complete, with regulator, 180W, 1440 RPM, heavy duty including taking down old unserviceable Air Circulator fan complete all as specified and as directed. Note :- Unserviceable Air Circulator fan shall be deposited in MES Store yard. Make :- Orient Model No 600 mm Thunderstorm Wall-Parrot Green, or equivalent make of Almonard Model No 600mm (24") Wall, with Regulator, Havells Model No FHACWSTSCL24 600MM Turbo force Wall Fan.

Taking down unserviceable water heater and S&F electric water heater (geyser), storage type steel body with glass tinted inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc & electric supply connection complete over and including grouting nuts & bolts of 15 mm dia 100 mm long for hanging the geysers, incl PVC connection pipe15mm dia, 450mm long heavy duty suitable for hot & cold water connections complete and plastering and finishing of plastered surface of wall as per existing finish complete all as specified and as directed. Note :- Unserviceable water heater shall be deposited in MES Store yard. Make: AO Smith Model No AO Smith ELJ Series Storage Water Heater ELIV 50 Litre Vertical Type, Havells Model No Monza dx Vertical Type, Racold Model No Racold Platinum Plus Vertical Type.

M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 Volts grade (ZHFR) Zero Halogen Flame Retardant Smoke Free, Non-Toxic, Non-Corrosive Electric Cable with multi stranded copper conductor of size 2.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia ERW stove neameled surface type including all flame proof conduit fittings and accessories such as tees, junction boxes, bends, duly tested by CMRI Dhanbad suitable for one 3 pin socket outlet 15 amp / 25 amp on independent board with and including drawing continuous earth wire PVC insulated unsheathed 1100 V grade (ZHFR) Zero Halogen Flame Retardant Smoke Free, Non-Toxic, Non-Corrosive Electric Cable with stranded copper conductor of size 2.5 Sqmm and connected to earth dolly complete all as specified and as directed. Note for srl item no. 15 to 17:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.

S & F of 1100 volts grade heavy duty two single core 6 Sqmm size (Nominal Area) PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 6 Sqmm size (Nominal size) stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. Note:- (a) Two single core cable alongwith one single core of earth wire and PVC conduit shall be measured and paid as one unit length. (b) M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate. Make :- Grandlay, Havells, RR Kabel

Supply, laying & testing of LT cable XLPE insulated, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts, grade cross setional area 25 Sqmm 4 Core including taking out existing unserviceable cable complete all as specified and as directed. Note:- Excavation, earthwork and cable protection shall be measured and paid seperately.

Supply, installing, commissioning and testing of Sewage pump set centrifugal type non cloging self primming 2500 LPM at 18 Meter head not less than 25 HP 3 Phase 415 Volts 1450 RPM including CI impeller, CI motor body, CI delivery casing, C-40 Shaft and gland packed sealing, required PCC foundation and cable connection with copper cable of suitable size from LT Panel to Electric motor complete all as specified and as directed. Make:- KIRLOSKAR Model KBL-SP6L with 25 C4 Motor or equivalent of make KSG / CG.

Supply and fixing cast iron sluice valve PN-1.6 with flanged ends 200mm nominal bore ISI marked complete with gun metal or stainless steel spindle and cast iron cap including rubber/fiber board gasket, nuts, bolts, washers etc including taking down old unserviceable sulice valves complete all as specified and as directed. Make:- KIRLOSKAR/ ZOLOTO.

Supply, fixing and testing cast iron Non return Valve, class heavy duty ISI marked, both ends flanged of size 100mm including fitting for connecting the line with jointing material including taking out old unserviceable valve complete all as specified and directed. Make :- Kirloskar/ Leader/ Zoloto.

Supply and laying galvanised iron pipes 150mm of medium grade with ISI marked with all tube fittings (such as bend, elbows, tees, short pieces of medium grade, connectors, back nuts, caps, plugs and unions etc) laying in trenches/ floor/ ducts and also cutting pipes, screwing and for making forged bends on piping as required including taking out existing GI pipe complete all as specified and as directed.

Taking up old GI/CI pipe from trencehs/floor including connected fittings/ accessories i.e. defective sluice valve, Non return Valve, Gate valve/stop valves etc of any size complete of any sizes for cleaning/re-fixing/replacing with necessary fittings and valves etc complete all as specified and as directed.

Supply, installation, commissioning and testing of hi wall split units indoor & outdoor copper winded complete with cordless remote control unit inverter type, electric driven single phase of capacity 1.5 TR, 5 star rating complete all as specified and directed. Make :- Bluestar Model No. IC518DBTU or equivalent of make Carrier or Voltas.

Supply, installation, commissioning and testing of hi wall split units indoor & outdoor copper winded complete with cordless remote control unit inverter type, electric driven single phase of capacity 2.0 TR, 5 star rating complete all as specified and directed. Make :- Bluestar Model No. IC524DBTU or equivalent of make Carrier or Voltas.

S&F voltage stabilizer for automatic operation single phase naturally air cooled type and designed for input variation between 140 volt to 280 volt with output voltage stabilized at 230 volt with accuracy + 2.5% and speed of correction 8 volts per second of capacity 4 KVA complete all as specified and as directed. Make :- Sinetrac / Bluebird / Microtek.

S&F voltage stabilizer for automatic operation single phase naturally air cooled type and designed for input variation between 130 volt to 250 volt with output voltage stabilized at 280 volt with accuracy + 2.5% and speed of correction 8 volts per second of capacity 5 KVA complete all as specified and as directed. Make :- Sinetrac / Bluebird / Microtek.

S&F MCB single pole and neutral, 240 Volts, 63 Amps, breaking capacity 10 KA, 'C' series etc complete all as specified and as directed. Make :- Legrand, ABB, Schneider

S&F MCB triple pole and neutral, 415 Volts, 80 Amps, breaking capacity 10 KA, 'C' series etc complete all as specified and as directed. Make :- Legrand, ABB, Schneider

M/S ARORA ENTERPRISES