Loading
Loading…
Loading…
Tender Value
₹34.1 L
EMD Value
₹68,229
Closing Date
7 Oct 2026, 4:00 pm
EE KWD PWD
N S Bldg
M.S. works in barrack as per revised drawing and additional necessary civil works related to Augmentation of existing Electrical Sub-Station and Surrounding area development, along with additional wall pannelling and finishing works at 4th floor Enqu
2026_WBPWD_5074730_4
WBPWD/KWD/EE-I/NIT-39/26-27
Open Tender
CIVIL WORKS
Percentage
20 days
HRBC Bhawan
Please refer Tender documents.
4 documents required · 4 mandatory
₹68,229
Yes
23 Sept 2026
23 Sept 2026
9 Oct 2026
24 Sept 2026
7 Oct 2026
24 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
In cement mortar | 25.69 | Cu.M. | 2,060.2 | ₹52,916.24 |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | 8.23 | Cu.M. | 3,551.25 | ₹29,223.24 |
| 3 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
2.28.1 All kinds of soil | 206.72 | Sq.M. | 34.15 | ₹7,059.49 |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.
2.6.1 All kinds of soil | 107.52 | Cu.M. | 177.5 | ₹19,084.8 |
| 5 | Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. | 224.72 | Sq.M. | 199.35 | ₹44,797.93 |
| 6 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete | 22.47 | Cu.M. | 2,123.75 | ₹47,720.66 |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 51.62 | Cu.M. | 9,045.75 | ₹4,66,923.52 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for :
4.3.1 Foundations, footings, bases for columns | 29.47 | Sq.M. | 392.15 | ₹11,556.66 |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
5.22.1 Mild steel and Medium Tensile steel bars | 4,052.01 | Kg. | 107.1 | ₹4,33,970.27 |
| 10 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: 6.2.1 Cement mortar 1:4 (1 cement : 4 coarse sand) | 12.73 | Cu.M. | 6,504.9 | ₹82,774.85 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.87 MB
BOQ_5162444.xls
BOQ • 0.30 MB
2911_ii.pdf
Tender Documents • 1.86 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .