Supply Installation Placement Testing and Commissioning of Medical-Hospital Furniture at AIIMS Bilaspur Himachal Pradesh

AIIMS BILASPUR, HP

Supply, assembly and placemnet of Bedside Locker-overall dimensions should be 400W x 420 Dx 840mm H. The Locker should have one

drawer unit and one cabinet unit fitted with Cam lock. Gap should be provided between the drawer and Cabinet unit for storage The

locker top should be of 0.8mm thick SS 304 Grade sheet . The SS sheet should be finished in buff-matt finish The top should have

raised border of 10mm hieght on three sidesDrawer should made 1 mm thick CRCA sheet . It should be fitted ball slides for smooth

drawer movement. It should be provided with recess to serve as handle. It should be fitted with lockCabinet should made 1 mm thick

CRCA sheet . It should be fitted with hinge door and lock. The dooor should have louvers for ventilation. It should be provided with

recess to serve as handle. Back of the locker should be provided with vertical spacer made of nylon.it should have uniformaly

distributed total load bearing capacity of 20 kg.To ensure qood quality welding " Co2 Argon" process should be adhered to. All metal

components should be pre treated with zinc phosphating in 7 tank porcess and then powder coated with epoxy polyster powder coating

. Goods should be supplied in knocked down construction to reduce carbon emission. Product should pass loading test , cycle tests ,

impact test, horizontal & vertical load tests for side rails, salt spray test, castor break test, pull test for head and foot board, valid test

report should be submitted. It hsould be complete in all aspects with the approval and satisfaction of Engineer In Charge

Suplly, assembly and placement of Overbed table-overall dimensions should be 1005mm lengthx380mm widthx950mm Height.The top

should be made of MDF 18mm thick and should be finished with membrane foil and bottom of the table top should laminated. Bottom

strucutre of the table, should be made of ERW round tube of dia 25.4mm and thickness 1.2mm . It should have members of dia 19mm

and thickness 1.2mm ( 2 nos on each side ) for rigidity. For ease in mobility, it should have castors of 50mm dia. To ensure qood quality

welding " Co2 Argon" process should be adhered to. All metal components should be pre treated with zinc phosphating in 7 tank

porcess and then powder coated with epoxy polyster powder coating.material should be supplied in knocked down construction to reduce

carbon emission, the product should perform and pass proof loading test , cycle tests , impact test, salt spray test, castor break test,

valid Test reports should be submitted. It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and placement of Crash cart with overall dimension of L 1048 W x 475 H x 1555 mm . SS 304 grade made top sheet

with 2mm thickness should be used. Middle & bottom sheet should be used made of SS 304 grade with thickness 1mm. SS 304 grade

frame bar with section of 25.4, 19, 1.2 & 16mm should be used. SS Cylinder case should be used welded with cylinder holding unit to

hook giving the curve bend at the bottom to hold the cylinder. SS 304 grade pipe of section 12mm should be used to provide provision to

mount IV rod. High endurance anti static, plastic injected molded 4 swivel castors of dia 125mm should be used & should have provision

for diagonal locking. SS 304 handle pipe should have section of 25.4mm with length of 365mm & should have thickness of 1.2mm giving

a glossy finish. SS 304 tubular frame should have five different colored removable bins mounted on top shelf and two polystyrene

lockable storage units with three drawers each. The top drawers should have containers of different sizes. Thermosetting epoxy polyester

with semi gloss finish powder coating must be used. Safe working load must be 40kgs.It should be complete in all aspects with the

approval and satisfaction of Engineer In Charge

Supply , assembly and placementg of Instrument trolley- SS 304 sheet should be provided at top for the placement of the instruments

being used & also for easy in portability. SS 304 sheet should be provided at the top as well as bottom shelf for keeping the instrument

4 being used. Horizontal bars should be welded with legs so as to provide protection at sides with supporting legs giving a sturdy look. Each 24084.00 117 2817828.00

Castors of 125mm Dia. should be used for easy in movement. Overall Dimension: 775mm X 531mm X 915mm H. Maximum safe working

load must be 40kg.It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Digitally signed by OM

Supply, assembly and placement of Three-Fold partition screen- Overall dimension: L 2637 X W 640 x H 1720 MM. Frame should be

made of ERW tube with movable plastic hinges. The fix frame should be made of 25.4 mm dia 1.2 mm thich ERW tube, the movable

frame shouuld be made of 19.05 mm dia 1.2 mm thich ERW tube and the leg frame should be made of 30 mm suqare tube with 1.6 mm

thick. The fixed portion should be 1075 mm width and the movable portion should be 778 mm width. 50 mm dia wheel castors should be

provided. All MS parts should be pre treated and powder coated with thermosetting epoxy polyester. Green color Casement fabric must

be provided for modesty. It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and installation of Medicine trolley-overall dimension: - 902(L) X 532(B) X 915(H) mm. Top shelf & bottom shelf should

be made of SS304 sheet with 1mm thickness & 1.2mm. Rest of the components like supporting legs, horizontal bar handle should be

6 made of SS 304 pipe having dia 31.8, 12.7 mm respectively. The castors of high quality plastic injected molded & anti static having the Each 24370.20 60 1462212.00

dia of 125mm should be used.Handles made of SS 304 pipe having section of 16mm & thickness of 1.2mm should be used.It should be

complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and installation of Mayo trolley-overall sizes of Base rectangle 504mm X 655mm X Adjustable from 814mm to 1340

mm. Height adjustment will be achieved with screw knob mechanism. Bottom frame should be made of 1.2mm thick SS 304 tube of

dimension 38 x 38mm square tube. Top frame should be of 1.2mm thick & 304 SS grade rectangular shape of dimension 30 x 30mm.

7 Fixed tube of 3 mm thickness square in shape of 38 x 38mm telescopic tube should be used of 2 mm thickness rectangular in shape of Each 22598.10 50 1129905.00

30 x 30mm. Locking knob should be used ergonomically designed made of SS screw & nylon knob. Tray supporting frame should be of

thickness of 1mm. Castors must be injection molded type of 50mm dia having high endurance, anti-static properties. Safe working load

must be 20kgs. It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, Assembly and placement of Examination couch with full storage- Overall dimension 1975 mm (L) x 560 mm ( W) x 805 mm (H).

Examination couch with three drawers with three cabinets, inbuilt step stool and BP tray holder.the base frame should made of 30 mm x

30 mmX 1.6 thick ERW tube. The cabinets should made of 1 mm thick CRCA sheet with recessed plastic handles and with lock and

plastic door latch. the hindges of the cabinet should be made of sheet metal and pin arrangement. The internal dimension of the two side

cabinets should be 422 mm (W) x 455 mm (D) x 540 mm (H). the internal dimension of the centarl cabinet should be 422 mm (W) x 455

mm (D) x 358 mm (H). The storage cabinet unit should be mount tubular base frame. The head rest should be adjustable on gas spring

which should be actuated with C shaped handle lever . The drawers should made of 1 mm thick CRCA sheet with recessed plastic handles

and work on double extension ball slides for smooth glide. the internal dimension of the drawer should be 330 mm (W) x 427 mm (D) x

8 92 mm (H). The mattress platform should be 65 mm thick which is made of 12 mm thick ply and PU foam and covered with leatherite Each 39006.00 138 5382828.00

cover.the cover should be water resistant, fire retuardant, aniti micraobial . the cover should have in-vitro cytotoxicity test report from

reputed test lab. the end of the top mattress surface should be tapered end edge for ergonomic benifit. There should be ss304 made

tissue roll holder present on the lower side of the back rest. There should be 1 mm thick CRCA made step stool with leveler with double

extension ball slide for smooth operation. There should be 1 mm thick CRCA made BP aparatus holder which should be adjustable in

height on a SS made height adjustable rod. Total load bearing capacity should be 135 kg. The examination couch should be provided

with six numbers levelers made of metal & plastic for adjustment on the uneven floor. All the metal parts should be pre treated and

powder coated with epoxy polyester powder coating.It should be complete in all aspects with the approval and satisfaction of Engineer In

Supply, assembly and placement of emergency trolley, which should be height adjustable, back rest should be adjustable and have

tredelenburg and reverse trendelenburg functions. Overall Size should be in-between L 2139 X W 780 mm X (H) Adjustable from

780mm to 1055 mm Bed Frame should be made of ERW 25X50 tube with thickness of 1.6 mm .Base frame should be made of ERW

25X50 tube with thickness 0f 1.6mm .The bed should have smooth Trendelenburg and reverse trendelenburg function with assist of 2

nos Gas Spring .the gas springs should be of 530 mm length and 168 mm stoke.

The bed frame should be height adjustable by assist of Hydraulic Pump stroke of 140mm.It should be smooth functioning and consistent

motion during operations is required. The trolley should be provided with detachable stretcher which should be have x-ray permeable top

made of high pressure compact laminate of 6mm thick. The top should be exceptional chemical and stain resistance. The fixed portion of

the top should be 1065 mm (L) x 590 mm (W) and tilted back portion should be 728 mm (l) x 590 mm (W). There should be ms made x-

ray cassette holder which can move along with the top length to perform x-ray on the different position. The x-ray Cassette should be

top mounted. Backrest should be adjustable on ratchet for patient comfort from 0 to 70 Degree. The trolley should be provided with high

end 125 mm non marking Steinco castors which should be lockable diagonally. The trolley should have Safe working Load should of 135

Kg on flat top .There should iv pole holder with ht adjustable ss made telescopic iv pole with two hooks to mount saline bags. The trolley

should be provided with 8 mm dia ms zinc plating urine bag holder on both the side. The trolley should be provided with drop down ss

made side rails which should provide shelter in more than half of the total bed length. the tube should be of 19 mm dia and 1.2 mm thick

ss 304 made. The trolley should have 4 nos Neoprene made bumpers for Excellent Shock absorbing property. The top frame should have

X ray Tray assembly made of MS CRCA sheet 1.2 thick X ray Tray can slide along the stretcher length. Provision given for changing the X

ray cassette at the leg side , knob to be provided for locking the assembly during TR operation . Fail Safe Mechanism- the trolley should

have Fail Safe mechanism to avoid collapse of ERT during gas spring failure for TR & ATR Mechanism. The trolley should be provided

with 2 nos U shaped head and foot bow at both the end to drag or push the trolley for movement. the bow should be covered with

neoprene material for better grip and avoid cold shock during patient handling. MS Oxygen Cylinder Holder – Provision should be given to

mount B type Oxygen Cylinder at the head side of trolley. The trolley should have MS file holder at the bottom to carry file and other

accessories during patient movement. The trolley should be provided with two pair of patient safety belt .

The bed should be provided with 40 density 50 mm thick PU foam mattress which should be covered by heavy helium material which is

water proof, flame retardant, vapour & X-ray permeable. The zip & stiches for the mattress cover should be concealed.All the MS parts

should be treated with 7 tank pre-treatment procedure with zinc phosphate and powder coated with thermosetting epoxy polyester . The

welding should be done by co2-argon welding and there should be Synerji coat on the welded areas to minimise early rusting. It should

be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and placement of Fixed SS top square stool- overall dimension of 411(l) x 411(w) x 522mm (h). Top should be made

of SS 304 sheet with buffed matt finish. MS square flat tube of section 25 x 25mm with thickness of 2mm should be used. Thermosetting

10 epoxy polyester powder coating must be done for all MS parts. Neoprene shoes should be provided to avoid the wear & tear of the Each 2451.60 750 1838700.00

product. All powder coating parts must be in Raal white & plastic, rubber parts in gray. Safe working load must be 135kg.It should be

complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply , assembly, placement of patient stool-Overall Dimension: Overall Sizes Diagonal Leg Dia 538 mm H470 min-655max Top plate

should made of SS 202 made sheet with spin section of thickness 1mm & should be non corrosive. It should have a diameter of 305mm,

seat base should made of MS ring and rectangular tube. EN8 Screw having dia of 22 mm should be used for height adjustment of the

seat base. The round hub should be made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub should be welded with the

11 legs and it should accommodate and cover the lead screw mechanism. The understructure should consist of 4 legs made up of MS ERW Each 4810.50 265 1274782.50

tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg should give a round & clean look. All the legs should be provided

with 4 nos of Nylon-6 bush. All metal components should be pre treated with zinc phosphating in 7 tank porcess and then powder coated

with epoxy polyster powder coating . Safe working load must be 135kg

It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and placement of Single step stool-Overall dimension 485 mm (L) x 355 mm (W) x 210 mm (H) .Understructure frame

consists of four vertical tibe, three horizontal tubes and three tubes to support the top. Tube is 19 mm dia 1.2 mm thick. The stool top

12 should be made of 2 mm thick MS sheet metal. It should have 4 mm thick three aluminium strips grooved on the top. All the metal parts Each 2205.00 140 308700.00

are pre treated and powder coated with expoy polyster poder coat.max load bearing capacity- 135 kg

It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and installation of Double step stool-Overall dimension should be 665 mm (L) x 485 mm (w) x 393 mm (H).

Understructure frame should be made of 19 mm x 19 mm and 1.2 mm thick vertical tubes. The stool top should be made of 1.2 mm

13 thick . The step top should have 3.2 mm thick rubber sheet to have better grip. load bearing capacity should e 135 kg.all tehmetal parts Each 7853.40 20 157068.00

are pre treated and powder coated with epoxy polyester powder coating. It should be complete in all aspects with the approval and

satisfaction of Engineer In Charge

Overall dimension should be 517 mm dia x 210 mm (H). It should be three legged kick bucket mounted on 50 mm dia castors. The ring

unit should be made of 25.4 mm dia and 12.7 mm dia, 1.2 mm thick ss304 tube. The bowl should be 0.8 mm thick . Load nearing

capacity should be 10 kg.

It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply , assembly and installation of Strecher on trolley with Overall dimension should be 2005 mm (L) x 666 mm (W) x 827 mm (H). It

should be removable stretcher on trolley mointed on castors.. The trolley should be made of 31.75 mm & 25.5 mm dia 1.2 mm thick &

1.6 mm thick ERW tube. The casters should be 200 mm dia diagonal lockable castors. stretcher understructure should be made of 25.4

15 mm dia 1.6 mm thick ERW tube and the top should be made of 1.2 mm thick CRCA sheet. The stretcher should have provision to mount Each 26251.20 30 787536.00

IV pole at four corners. The product should be pre treated and powder coated with Epoxy polyster powder coating.The maximum load

bearing capacity should be 135 kg.

It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and placement of Scoop Strceher with Size-min L 168 cm *W 43 cm *H 7 cm, max L224 cm *W 45 cm * H 10 cm. the

overall construction should be made up of alluminium complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and placement of Spine board of size L 1900 mm* W 570 mm * 65 mm. The construction material should be LLDPE

plasticcomplete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and placement of IV stand with completely Mild Steel (MS) on four castors. Base Circle dia 695mm x adjustable height

from 1568mm upto 2121mm. The Saline stand is made of completely MS with 4 no.s of SS hook at the top. This saline stand has 50mm

18 dia 4 castors at the base for easy movement. Maximum safe working load is 3per kg per hook.All ms parts should be pre treated and Each 7476.30 224 1674691.20

powder coated with epoxy powder coating.

It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and placement of Foldable wheel chair with Over all dimension should be (L) 790 x (W) 600 x (H) 870mm Foldable

frame structure should be made of section 22x1.2mm A3 carbon steel with chrome finish. Cross bar should be made of A3 carbon steel

with section 25.4 x 1.2mm.The Rear wheel should be made of 24 inch Solid mag wheels with alloy in the rim .Integrated handrim shoud

be provided to drive the wheel chair of section 16x1.2mm A3 carbon steel with chrome finish. The front wheel should be of 8 inch HUB

19 made of PA polymer and outer with solid rubber. PU molded arm rest & base should be made of ABS for better arm support .There Each 16700.40 114 1903845.60

should be Leatherite strap for calf rest & leatherite cushion for seat. The foot rest should be Adjustable alluminimum die cast foot rest

with updown & swivel type mechanism and Push Handles should be made of moulded rubber grip to push the wheelchair. Hand brakes

should be provided to lock the wheelchair at desired location. The finsih of chair should be antirust chrome.

It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and placement of Dressing Trolley- SS 304 sheet should be used at top for the placement of the instruments being

used & also for easy portability.SS 304 sheet should be at the top as well as bottom shelf for keeping the instrument being used.

Horizontal bars should be welded with legs to provide protection at sides with supporting legs for sturdy structure. Castors of 125mm

Dia. should be used for easy in movement. Spin section should be provided to the bowl giving a aesthetic look & also bucket should be

20 provided with removable lid & a handle to lift the bucket. Overall Dimension must be 1156 mm X 531mm X 915mm H. The Top and Each 27396.00 94 2575224.00

bottom shelf should be 1 mm thick ss 304 sheet, the shelf size is 755 mm x 467 mm. The supporting legs should be 31.08 mm dia 1.2

thick ss 304 tube. The horizontal bar should be 12.7 mm dia 1.2 mm thick ss 304 tube. to support top & bottom shelf. Maximum safe

working load must be 40kg. the shelf should have 10 kg load and bowl & bucket should have capacity of 5 kg load. It should be complete

in all aspects with the approval and satisfaction of Engineer In Charge

Supply and placement of Air mattress for ICU Bed. Size L 6 Feet * W 3 Feet. Weight load 250 KG. The matress should be foldable

complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and placement of Fowler bed with Dimension Overall dimension: (L) 2140 x (W) 912 x (H) 560mm.

The bed should have two function with adjustable backrest 70deg & upperleg rest 24deg. The Head board & foot board should be made

up of 1.6mm thick SS 202 tube of 25.4 mm dia with 18 mm PLT board. Bed frame should be made of MS ERW tube of size of 1.6mm

thick. It should have provision 4 iv pole holders . It should be strengthned by rectangular tube section of size 60mmx30 mm having 1.6

mm thickness. The leg Under Structure should be made up of ERW tubes with thickness of 1.2mm with suitbale section Lying surface

should be made of CRCA sheet of thickness of 1mm thick . This lying surface should have 4 sections for bed profiling i.e. back

adjustment, fixed pelvic section, upper and lower leg adjustment. Lower leg rest section is provided with Ratchet for leg rest

adjustment. Mattress platform is strengthned by tubular frame of size 25.4mm dia x 1.2mm thickness. It should be strengthned by

trapizodal contour ( rounded corner ) 14 nos, embossed cut out. All functions should be operated with lead screw mechanism, ACME

threaded EN8 made 6mm pitch for easy in movment. Castors should be High endurance, plastic injection molded castors of 125mm dia

having provision for diagonal locking with stem dia 22mm should be provided for better stability.Bed should be powder coated with Anti

rust, thermosetting epoxy polyester powder coating should be used. Maxium weight carraying capacity should be 135Kg.

Product should pass test lik - loading test , cycle tests , impact test, horizontal & vertical load tests for side rails, salt spray test, castor

break test, pull test for head and foot board. valid test report should be submitted.

The bed should be provided with one pair Side rails pull to turn down collapsable type. Side rails should be made of MS ERW tube

having 25.4mm dia and 1.6 mm thick. The side rails should get locked when raised. The knob should be made out of Injection molded

Nylon for ease of operation. The locking of side rail pin should be fitted with SS liner to prevent rusting and wear and tear. Side rail

joints should have plastic bushes and couplings.

CHART / DOCUMENT HOLDER

Overall Sizes (L)464 mm X ( W)137 mm X (H) 344 mm. Wire mesh made of MS rod of dia 6mm & front cover MS sheet of thickness

0.6mm. product should be pre treated and powder coated with epoxy polyster powder coating.

IV POLE ADJUSTABLE HEIGHT ON BED-SS MAKE

Overall dimension should be 250 mm PCD with height adjustable from 743 mm to 1150 mm. it should be fully ss made used on bed with

telescopic rod for height adjustment. The bottom adapted should be 12 mm dia, fixed tube should be 15.9 mm dia , 1.6 mm thick ERW

Tube. Telescopic rod should be 12 mm dia ERW tube. there should be 2 nos 6 mm dia hooks to hang saline bags. Maximum load bearing

capacity should be 2kg per hook.

The product should be CE certified from any European notifying agency with 4 digit registration code and USFDA registration. It should be

complete in all aspects with the approval and satisfaction of Engineer In Charge.

Supply, assembly and placement of Semi-motorized Bed with X-ray permiable back rest- Overall dimensions should be : (L)2241 mm X (

W)1050 mm X (H) Adjustable from 490 mm to 750 mm. The bed should have Three Electric operated features like Backrest, Legrest ,

High-Low(one handset may be provided) and Two mechanically operated functions : Trend/ Reverse trend. Note: Height of bed for TR

and ATR should be 650mm from the ground and above. Min ht: should be 490 mm; Max ht should be: 750 mm without mattress. Back

rest angular movement should be 65 deg; Knee rest angular movement should be 30 deg. Trendlenburg 12 degree and Reverse

trendelenburg 8 degree. Safe working load should be 200 kgs Patient load bearing capacity: 135 kgs. All edges in contact with patient to

be rounded safely. Head & Foot board should be made of blow molded Poly propylene. Head board and foot board should be with metal

inserts to mount it on bed frame. Removable PP head board and foot board should have cut out , for better gripping. Bed frame should

be made of MS ERW tube of size 50mmx25mm of 2 mm thick supported with ERW square tube with 25 mm x 25 mm and 1.2 mm thick.

All corners of bed frame are provided with bumper mounting holders and it should have provision 4 iv pole holders .Base frame should

be made of MS ERW tube of size 30mmx60mm of 2mm thick. Base frame should have ground clearance of greater than 150 mm to avoid

any obstruction during bed movement. Base frame should have provison to mount oxygen cylinder cage. It should have trendelenburg

indicator guide. Bed lying surface should be made of PP injection mould . This lying surface should have sections for bed profiling i.e.

back adjustment, fixed pelvic section, upper and lower leg adjustment.Lower leg rest section is provided with Ratchet for leg rest

adjustment with a single hand operation to acheive the position. Mattress platform is strengthned by frame of size 25 mm x 25 mm and

1.2 mm thick.Bed mechanisim should be made of linkages which are made by HR MS flat of size 40mmW x 10mm thick. This mechanism

should be operated with the help of lead screws and crank. Lead screws should be made from EN8 and ACME threads roll formed. The

manual function is operated with the help of an ergonomically dedicated handle, which is made of metal inserted PP co polymer , it

should be snap locked when not in use. There should be operating guidance sticker for the manual operation. 4 TPE rotating bumpers

of dia 92mm height 69mm with 40-50 shore hardness should be provided at four corners to protect the bed and patient from impact

and avoid damages to wall. Handle to operate manual function on crank made of PP injection moulded. Handle should be snap locking

23 which can be kept in folding position when not in use. Handle parking provision to be given in bed. The bed should be provided with Each 117153.00 40 4686120.00

125mm wheel dia,twin wheel ,plastic polymer with metal insert castors. Out of 4 castors two should be provided with brake, mounted at

diagonally opposite position. Ergonomically designed plastic handle having opening mechanism in 90 deg position. Handle levers fold

compactly upwards with snap fit when not in use. Handles are self with a brass insert and a chrome plated knob with a Nylon grip The

bed should be provided with PP molded side boards of 4 no's providing full coverage to bed. These side boards should be integrated with

drop down mechanism for easy operation. The side boards should be provoded with angle indicators.The bed should have MS powder

coated urine bag holder on both side of the bed for ease of accessibility. To ensure qood quality welding " Co2 Argon" process should be

adhered to. All metal components should be pre treated with zirconium phosphating in 7 tank porcess and then powder coated with

epoxy polyster powder coating

proof loading test , cycle tests , impact test, horizontal & vertical load tests for side rails, salt spray test, castor break test, pull test for

head and foot board.

Electrical details: Supply Voltage : 100-240VAC +/- 10%; Current: 2.5A max, Electric Shock Protection: ClassI, Type B, Liquid Ingress

protection IPx4, Duty Cycle 10% or max 2min continuous ON followed by 18min continuous OFF, Three Electric operated features are

Backrest, Legrest , High-Low(Only one handset will be provided). The bed should have provision for front loading medium sized ms made

oxygen cylinder cage. The bed should be provided with Telescopic IV pole made of Stainless steel to mount saline bags. The bed should

be provided with 40 density 100 mm thick PU foam mattress with ridges for easy bending. It should be covered by heavy helium

material which is water proof, flame retardant, vapour & Xray permeable with bacteriostatic properties. The zip & stitches for the

mattress cover should be concealed.

Accessories to be provioded with bed: Two PC Infusion Pole, X-Ray permiable backrest with casette holder, chart holder, Oxygen

The product should be CE certified from any European notifying agency with 4 digit registration code and USFDA registration. It should be

complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and placement of Fully automatic wire remote controlled Intensive care unit bed with back rest up down, knee rest up-

down, trendelenburg and reverse trendelenburg, hi-low position controlled through noiseless electro mechanical actuators (German

make) operated by soft touch wired attendant( nurses’)control panel. Bed should have single touch cardiac chair position and manual &

automatic CPR postion. All the positions should be locked from nurse control panel.The lying surface should be made up of ABS and

should have 4 nos removable ABS panels/cover.

The bed sould have 4 nos side board which gives full coverage and should be air matress compatible. The Bed should be with 4 nos TPE

bumpers to absorp shock . The Bed should be with manaul and automateic CPR lever, bed should be with manual DVT position on

ratchet. The head and foot board should be reasily removable. The bed should be provided with 125mm plastic injection moulded

diagonal locking castors. It should have accessories like urine bag holders; ms chrome plated linen tray and provision for bed extension

upto 180mm. There should be provision for front loading medium sized ms made oxygen cylinder cage.

Other Technical Details:

• Overall Length: <2200mm

• Overall Length (with extended): <2380mm

• Overall Width :1010mm

• Height Range: 425 mm to 775 mm without mattress.

• Reverse Trendelenburg: 0°-15° (+/-2°)

• Backrest Angle (Max.) : 0°-65° (+/-5°)

• Leg rest Angle (Max.): 0°-24°(+/-5°)

• Castor Diameter: 125mm

• Under Bed Clearance: 150mm

• Safe Working Load (With Accessories) : 250kg

Electrical details:

• Power In: 3.9A max. At 230V AC 50-60 Hz

• Electrical Shock Protection: Class I, Type B

• Liquid Ingress Protection: Actuators - IPX4

• Control box - IPX6 Washable.

Accessories: Two PC Infusion Pole, X-Ray permiable backrest with casette holder, chart holder, Oxygen Cylinder cage, Bed extender

The product should be CE certified from any European notifying agency with 4 digit registration code and USFDA registration.

It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and placement of Fully automatic embedded control Intensive care unit bed with back rest up down, knee rest up-

down, Trendelenburg and reverse Trendelenburg, Hi-low position controlled through noiseless electro mechanical actuators (German

make) operated by soft touch control panel.bed is with single touch cardiac chair position, shock position and examination position. All

the positions can be locked from nurse control panel.The bed sould have 4 nos side board which gives full coverage and should be air

matress compatible. The Bed should be with 4 nos TPE bumpers to absorp shock. Their should be 3 nos of embedded control panels, 1

nos for nurses and 2 nos for patient. The Bed should be provided with manaul and automateic CPR lever, bed should be with manual

DVT position on ratchet.

Technical and other Details:

• Overall Length: <2200mm

• Overall Length (with extended): <2380mm

• Overall Width :1010mm

• Height Range: 425 mm to 775 mm without mattress.

• Trendelenburg: 0°-15° (+/-2°)

• Reverse Trendelenburg: 0°-15° (+/-2°)

• Backrest Angle (Max.) : 0°-65° (+/-5°)

• Leg rest Angle (Max.): 0°-24°(+/-5°)

• Castor Diameter: 125mm

• Under Bed Clearance: 150mm

• Safe Working Load (With Accessories) : 250kg

The bed should be provided with 125mm plastic injection moulded twin wheel castors with central and directional locking facility. The

25 castors should be provided with an auxiliary brake made of MS round tube. Each 275633.10 17 4685762.70

It should have accessories like urine bag holders; MS chrome plated linen tray and provision for bed extension up to 180mm.

Electrical details:

• Power In: 3.9A max. At 230V AC 50-60 Hz

• Electrical Shock Protection: Class I, Type B

• Liquid Ingress Protection: Actuators - IPX4

• Control box - IPX6 Washable:

The bed should be consist hear Beam Load Cells from Zemic®, Europe (Accuracy Class – OIML* R60 C3; Min Dead Load = 0%; SWL =

150%) & German made Scale System compatible with LINAK® OpenBus platform. The Weight Management System should have the

following features:

1) Measuring Range (German Make): 0 to a max 250 kg Load on application (SWL)

2) Hand Control – safety via Enable button plus Function Button

3) Accuracy Adjustment: 100 or 500 gms of measured weight (as per EN60601-1/45501)

4) Auto Compensation Feature: Upto +/-100 gms

5) Reset/Zero Adjustment (to omit weight of mattress) ≤ 50 Kgs

6) Out of Bed Detection/Alarm Feature for patient leaving the bed.- Bed exist Alarm

7) Weight Unit Selection: Kgs/Lbs

8) Protection Class, SCO (Scale Control OpenBus): IPX6

Accessories to be provioded with bed : 2 Infusion Pole, X-Ray permiable backrest with casette holder, chart holder, Oxygen Cylinder

cage, Bed extender mattress.

The product should be CE certified from any European notifying agency with 4 digit registration code and USFDA registration.

It should be complete in all respect up to satisfaction of Engineer In Charge

Supply and placement of Matress for ICU Beds. Matress should be of 40 density 100 mm thick PU foam mattress which is covered by

heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stitches for the mattress cover is

concealed. The over all dimension is 1905 mm ( L) x 840 mm ( W) x 100 mm ( H).

It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply and placement of matress for Semi-motorized bed with siez-(L)1950*(W)853(H)100 mmThe bed should be have provision to

mount IV pole and hooks to hang saline bags on both sides The bed should be provided with 40 density 100 mm thick PU foam mattress

27 with ridges for easy bending. It should be covered by heavy helium material which is water proof, flame retardant, vapour & Xray Each 9144.90 40 365796.00

permeable with bacteriostatic properties. The zip & stitches for the mattress cover should be concealed.

It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply and placement of 4 -section matress for fowler bed of size-(W)1965*(W)830*(H)100 The bed should be provided with 40 density

100 mm thick PU foam mattress which should be covered by heavy helium material which is water proof, flame retardant, vapour & X-

ray permeable. The zip & stiches for the mattress cover should be concealed.

It should be complete in all aspects with the approval and satisfaction of Engineer In Charge

Supply, assembly and placementg of Soiled linen trolley with Overall dimension should be 625 mm dia and 955 mm height.

The base frame should be made of 25 mm dia and 10 mm dia 1.6 mm thick ERW tube.It should be fitted on 50 mm dia castor.

The bag should made of Casement fabric which should be wasable. Overall load bearing capacity should be 10 kg.. It should be complete

in all aspects with the approval and satisfaction of Engineer In Charge

Supply and installation of OT Table with overall Size should be L 1800 MM x W 560 MM x Height adjustment 730mm to 1020mm from

Floor to mattress Top. Multipupose OT table should be able to obtain Cardiology position, Gynecology surgical position, Jack knifesurgical

position, Sitting position, Head and Neck, Thyroid and breast surgical position, Gastroentrology position, Cardiothoracic surgical position,

Vascular surgical position. Headrest section size should be 485 x 260 x 40 mm. Back rest section size should be 505 x 430 x 40 mm.

Pelvic section size should be 510 x 500 x 40 mm. Pelvic Extension section size should be 510 x 310 x 40 mm. Dual joint leg rest section

size should be 665 x 245 x 40 mm. Base foot print size should be L 900 MM x W 530mm / 380mm x Height 145mm. Ground clearance

should be 10 mm in unlock position. Trendelenburg/Rev.Trendeleburg should be 30˚ / 30˚(Motorised). Lateral tilt should be 21˚ /

21˚(Motorised). Backrest should be 70˚ UP/ 50˚ DN (Motorised) from horizontal position. Legrest should be flat. Head rest should be

45˚ UP/ 45˚ DN (Manual) from horizontal position. Leg rest abduction (Left / Right) should be 0˚ - 90˚ (Manual). Maximum patient Load

capacity must be 220 Kg. Power supply should be 220 V, 5 Amp, 50 Hz. Battery backup should be provided fitted with OT table as

emergency power back for resetting the positions. Lithotonomy crutchesshould be adjustable along Rod Axis, Rotation 360˚ around road

Axis, Crutch pad adjustable in swivel joint. C-ARM Compatibility should be eccentric construction. Foot brake should be single lever

operated with dead lock braking system. Dual joint leg section and head section shuld be detachable / interchangeable. Rod should be

provided for Anesthesia screen. Table should have zero position memory that bring table back to normal (Trendelenburg, Back and

lateral Tilt). Safety lock should be incorporated in siderail prevent the clamp falling off. Safety protection device should be incorporated to

safe guard against actuators mechanical breakage. Base assembly should be aesthetically and scientifically designed T-Shape heavy

structure made of Ms Sheet flat and MS Casting with Zinc plating finish., Base should be counter balanced for stability and structure

should be covered with 1.6mm thick SS 304 Fabricated sheet. Column should be designed for self-lubricating, weldless, joint less and

jerkless with high load carrying capacity. Column should be made by SS casting and complete assembly covered with SS 304 Fabricated

sheet. Top frame structure should be made of SS 304 tubular frame of section 50mm X 50mm X 3mm Thick. X-Ray Translucent

compressed laminate platform should be provided on all sections of mattress support frame. Molded Polyurethane foam mattress should

be of density 55 Kg/Cu.m, Stitchless molded PU mattress ensure sterility and comfort, Mattresses should be supported by 10mm Bakelite

sheet. Polyurethane twin wheel non-marking central lock heavy duty castor of wheel dia 100mm to suit the application of OT table. Back

rest , Height adjustment, Trendelenburg and Lateral Tilt should be operated by linear actuator of Ti-Motion make. Actuators should work

on powder 24VDC with duty cycle - 10%. Legrest and Headrest should be operated manually. Lithotomy crutches should be made of SS

304 Rod and molded polyurethane with ergonomic calf rest profile to suit the Operation table application. Standard Accessories should

include Anesthesia screen, Perennial cutout filler, Shoulder supports, Lateral supports, Knee Crutches, Arm Boards, Radial clamps for

assemblies, Simple Side End Block, Side Support with Clamp and Body strap. All SS parts should be Glossy buff finish and MS parts

should be zinc plated. Mattress should be Black color (molded). Flexible bellow should be Black color (Neoprene). Calf pad should be

Black color (Molded). It should be complete in all aspects with the approval and satisfaction of Engineer In Charge.

Supply, assembly, and placement of Instrument Almirah of overall dimensions of 900mmWx 1990mmHx450mmD. It should have

transparent doors and sides with steel frame work. Transparent portion of this cupboard should be made of Acrylic of 4mm thick. This

cabinet should have 5 adjustable MSpowder coated shelves each of 0.7 mm thickness. Three way lock should be provided of 6 levers. In

the front door there should be 4 acrylic sheets and 2 each on both the sides. Metal used should be of CRCA and powder coated for finish.

To be provided with rubber shoes to prevent direct contact of cabinet and floor. ISO 9001, 14001, OHSAS 1800, ISO 13485:2016, and

CE certification

Supply, assembly, and placement of MS Oxygen cylinder trolley suitable for B type oxygen cylinder. The overall dimension should be 410

mm (L) x 375 mm (W) x 1112 mm (H). The main frame should made of 25.4 mm dia 1.6 mm thick ERW tube with 10 mm dia ms made

The trolley should be provided with 100 mm dia 25 mm thick PU wheel for longer durability. LDPE made leg bush should be provided on

the legs. Max load bearing capacity should be 50 kg. ISO 9001, 14001, OHSAS 1800, ISO 13485:2016,and CE certification.

Overall Dimension: (L)896 mm X ( W)395 mm X (H) Adjustable from 799 mm to 1092 mm.

Table top Height can be adjusted with the help of operating lever which activates the gas spring.

Dimension of the fixed top is 185 mm x 395 mm and the dimension of the tiltable top is 711 mm x 395 mm . The top should be tiltable

with spring loaded knob.

Castors: High endurance anti-static,Plastic injection molded castors are provided of Ø50mm.

The manufacturer should compilant with ISO 9001, 14001, 13485 & OHSAS 1800 and CE certification.