Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
20 Apr 2026, 11:00 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
No
60 days
Expenditure
General
RJT DIV.
1 condition
I/We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Conditions of contract (latest revision) and upon the terms of t he Revised Special Conditions and instructions for the guidance of the contracts issued by the Western Railway S/137/F Revised May 2011 Amendment No. 10 of November 2017.
32 conditions
MARKING : Manufacturer to mark his name and date of manufacture as per drawing, wherever indicted, or at a location where it may not get obliterated in service on the item being supplied by them against the purchase order. Supplies received without this are liable to be rejected by consignee.
LIQUIDATED DAMAGE (LD) ON DELAYED SUPPLY: Recovery of Liquidated Damage (LD) shall be levied @ 1/2% (half percent) of the price of the store per week or part of the week during which delivery is accepted and the upper limit for recovery of LD in supply contracts is 10%(ten percent) of the value of contract irrespective of delays, unless otherwise provided, specifically in the contract.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
In case of road delivery, the date of delivery at destination [consignee's end] shall only be treated as delivery date irrespective of F.O.R. / F.O.T. condition mentioned elsewhere in the contract / tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
2 conditions
Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
1 location across Gujarat
PRESET AIR FILTER AND REGULATOR / FITTING MALE ELBOW / WAY SINGLE SOLENOID VALVE
87255331A
87255331A
Open - Indigenous
Goods
Sabar Kantha, Gujarat
₹0
Exempted
20 Apr 2026
26 Mar 2026
Description :PRESET AIR FILTER AND REGULATOR 1/4 INCH AT 3 BAR PRESSURE WITH BRACKET AND FASTENERS DESIGNED FOR PRESSURISED FLUSHING S YSTEM; PART:SPAC.0018577; MAKE: SPAC OR SIMILAR. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SR. SECTION ENGINEER (C&W) HAPA, WR Gujarat 10.00 Numbers
Description :ANGLE SEAT VALVE-3/4 DESIGNED FOR PRESSURISED FLUSHING SYSTEM confirming to specification No. MMDTS 19027-Rev-3 Accepted make: SPAC OR SIMILAR. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SR. SECTION ENGINEER (C&W) HAPA, WR Gujarat 5.00 Numbers
Description :FITTING MALE ELBOW - 02 nos. 8MM TUBE BSP 1/4 INCH (SS BODY) DESIGNED FOR PRESSURISED FLUSHING SYSTEM; PART:SPAC.0011034; MA KE: SPAC OR SIMILAR [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SR. SECTION ENGINEER (C&W) HAPA, WR Gujarat 10.00 Set
Description :SET OF REPAIR KIT FOR PISTON ASSEMBLY OF EPFS: 1) SEALKIT FOR WATER PRESSURISER UNIT PART:SPAC.0020598; 2) KIT PISTON ASSEMBLY - AIR SIDE DESIGNED FOR PRESSURISED FLUSHING SYSTEM PART:SPAC.0023476; 3)KIT PISTON ASSEMBLY - WATER SIDE DESIGNED FOR PRESSURISED FLUS HING SYSTEM PART: SPAC.0023477; 4)KIT FRONT END COVER ASSEMBLY - WATER SIDE DESIGNED FOR PRESSURISED FLUSHING SYSTEM PART:SPAC.002347 5; 5) KIT MIDDLE END COVER ASSEMBLY DESIGNED FOR PRESSURISED FLUSHING SYSTEM PART:SPAC.0023481; 6)KIT REAR END COVER ASSEMBLY - AIR SID E DESIGNED FOR PRESSURISED FLUSHING SYSTEM PART:SPAC.0023479; 7) KIT PISTON ROD ASSEMBLY DESIGNED FOR PRESSURISED FLUSHING SYSTEM PA RT:SPAC.0023478; 8) KIT TIE ROD ASSEMBLY DESIGNED FOR PRESSURISED FLUSHING SYSTEM PART:SPAC.0023480; MAKE: SPAC OR SIMILAR [ Warranty Pe riod: 30 Months after the date of delivery ] ] Consignee SR. SECTION ENGINEER (C&W) HAPA, WR Gujarat 5.00 Set
Description :ELECTRONIC TIMER SPDT DESIGNED FOR PRESSURISED FLUSHING SYSTEM CONTROL PANEL; PART:SPAC.0011211; MAKE: SPAC OR SIMILAR [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SR. SECTION ENGINEER (C&W) HAPA, WR Gujarat 6.00 Numbers
Description :END STOPPER FOR PRESSURISED FLUSHING SYSTEM CONTROL PANEL - 02 NOS, MAKE: SPAC OR SIMILAR, Item Code: CON.0001243 [ Warrant y Period: 30 Months after the date of delivery ] ] Consignee SR. SECTION ENGINEER (C&W) HAPA, WR Gujarat 8.00 Set
Description :5/2 WAY SINGLE SOLENOID VALVE BSP 1/4 INCH (WITH MOUNTING 24VDC COIL & WITHOUT FITTINGS) DESIGNED FOR PRESSURISED FLUSHING SYSTEM; PART:SPAC.0007995; MAKE: SPAC OR SIMILAR. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SR. SECTION ENGINEER (C&W) HAPA, WR Gujarat 8.00 Numbers
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecificationMMDTS19027Rev.-03.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .