Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹3.6 L
EMD Value
₹7,230
Closing Date
2 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER CIVIL
D 6 2ND FLOOR LOHANAGAR STAFF QUARTER BHAKTINAGAR TE COMPOUND RAJKOT
Essential Repairs and Maintenance of Jawahar Road TE Building at Junagadh 3rd call
2023_BSNL_175351_1
NIT No. 23/EECD/BSNL/RJT OF 2023-24
Open Tender
Civil Works - Buildings
Item Rate
60 days
JUNAGADH
2 documents required · 2 mandatory
₹590
AO CASH BSNL GMTD JUNAGADH
₹7,230
6 Dec 2023
22 Nov 2023
4 Dec 2023
22 Nov 2023
2 Dec 2023
22 Nov 2023
Amount
Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : a) Cement mortar 1:6 (1 cement : 6 coarse sand).
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand).
Deduct for not providing scaffolding in above item of 18 mm cement plaster as this item of scaffolding is taken seperately
Repairs to plaster of thickness 12 to 20 mm in patches of area 2.50 sqm and under, including cutting the patch in proper shape,raking out joints and preparing and plastering surface of wall including disposal of rubbish to the dumping ground, all complete as directed by the enginner In-Charge. a) With Cement Mortar 1:4( 1 cement : 4 Coarse sand)
Cleaning of exposed reinforcing bar including lateral ties/stirrups to be cleaned throughly to remove all the rust/corrision etc. using emry paper/wire brush and providing & applying total rust remover using approved alkaline chemical rust remover ( Dr. Fixit Rust Remover or approved Equivalent ) with paint brush as per manufacture's specification and as per direction of Engineer-in -charge. (Area of the RCC surface as before the application of treatment is to be measured for payment.)
Providing and applying Epoxy passivate coat of Dr. Fixit Epoxy Zinc Primer or approved Equivalent over exposed, cleaned, new/old reinforcing bars to provide a continuous film around the reinforcing bar as per manufacturer's specifications and as per the direction of Engineer-in-charge. (Area of the RCC surface as before the application of treatment is to be measured for payment.)
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : a) In cement mortar
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to dumping ground within 50 Mts lead
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
Providing and fixing G.I. weld mesh of aperture 15mmx15mm & 17 SWG including cutting, fixing with GI justa nails, washers, screws etc. of approved and required size on RCC surface with power dri Dr. Fixing epoxy zinc primer or equivalent on weld mesh all as per the direction of Engineer-in-charge.
V R SOLANKI
stage.html
html • 0.03 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .