PROPOSED PRIMARY SCHOOL BUILDING @ TP NO.: 84/A (SHARKHEJ), F.P. NO.: 92/2, SOUTH WEST ZONE, AHMEDABAD MUNICIPAL CORPORATION, AHMEDABAD.

Sr. Rate Amount

Description Qty. Unit

No. DTS NO Rs. Ps. Rs. Ps.

Builidng part -1 :- WORK UPTO PLINTH LEVEL

Earth work in cutting in all sorts of soil and soft murrum including conveying and

putting the stuff in spoil bank maintaining minimum distance of five meter

1 between top edge and cutting and toe of spoil bank.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

useful materials and disposing off the excavated stuff upto 50 Meter lead.

(With Machineries)

2 2 (A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out

and stacking of useful materials and disposing off theexcavated stuff upto

(With Machineries)

3 2 (A) Loose or soft soil

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out

and stacking of useful materials and disposing off the excavated stuff upto

(With Machineries)

4 2 (A) Loose or soft soil

Add extra for Disposing off the excavated stuff of above items for lead of (A)

Add extra for Disposing off the excavated stuff of above items for lead of (B)

Self Rolling and consolidation using vibratory road roller 8-10 tonne capacity.

7 Explained (A) Earth Work (Layer not exceeding 200mm thickness)

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6-

hand broken stone aggregates 40 mmnominal size) and curing complete

excluding cost of formwork in

8 3- b (A) Foundation and Plinth

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out

the soil and disposal of the surplus excavated soil as directed within a lead of

Meter for following diameter of pipes.

9 2- j (iii) 300 mm

Providing & laying Granular sub base (GSB) confirming to Grading-V of Table

400.0 of compacted thick of 150mm with specified graded stone metal and

sand mixed in place and laid with mechanical means spreading with motor

grader and compacting with vibratory roller having minimum 80-100 KN static

weight to acheve desired density of 98% of MDD including all material, labour,

machinery with all leads and lift etc. complete.

Production & Supply of GSB (Crusher Run) 246.00 ₹ 1,763.00 C.M. ₹

10 7- C Laying of GSB (Crusher Run) 246.00 ₹ 30.00 C.M. ₹

Providing and laying in position Ready Mixed M- 300 grade concrete for

reinforced cement conctere work , using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to

site of work in transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from transit mixer to site of laying,

excluding the cost of centering shuttering finishing and reinforcement including

cost of admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be maintained) (Cement level 475 kg )

Ready Mixed M- 300 grade concrete For Foundation & Mass Concrete 820.00 ₹ 5,043.66 C.M. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 2/43

Ready Mixed M- 300 grade concrete For Column, Pillers, posts and struts 107.00 ₹ 5,043.66 C.M. ₹

Ready Mixed M- 300 grade concrete For Grade Slab 165.00 ₹ 5,043.66 C.M. ₹

Ready Mixed M- 300 grade concrete For Beams. 69.00 ₹ 5,043.66 C.M. ₹

11 10.3 Ready Mixed M- 300 grade concrete for RCC Wall 50.00 ₹ 5,043.66 C.M. ₹

Providing formwork of ordinary timber planking so as to give a rough finish

including centering shuttering strutting and propping etc. Height of propping and

centering below supporting floor to ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete and plain concrete work in.

Extra for Providing formwork with sheathing steel sheets so as to give a fair

(A) Foundations Footings Bases of Columns etc. and Mass concrete. 751.00 ₹ 265.70 Sq. Mt. ₹

(G) Columns Pillars / Posts and struts. (1) Square Rectangular Polygonal in

(H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders

Bressumers and Lintels not exceeding 1 M. in Depth. 577.00 ₹ 286.17 Sq. Mt. ₹

(I) Edges of slabs and Breaks in floors and walls. 159.00 ₹ 161.75 Sq. Mt. ₹

(K) Small surfaceas such as cantiever brackets and ends of steps caps and

basses to pilasters and Columns and the like. 22.00 ₹ 698.82 Sq. Mt. ₹

(C) Vertical surface such as walls (any thickness) partitions and the like

12 12 including attached buttresses & string course & the like. 91.00 ₹ 323.97 Sq. Mt. ₹

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

13 132 binding and placing in position complete upto floor two level

Brick work using common burnt clay building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1-

14 8 Cement : 5 -fine sand) (B) Conventional Red Bricks

Filling available excavated earth excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

15 5 disposited layer by ramming and watering.

Self Filling in foundation and plinth with brick Bats Chhara in layers of 20cm.

16 Explained thickness including watering, remming and consolidating etc. complete.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

17 7-b thickness including watering, ramming and consolidating etc. complete.

Self Providing and laying 200 micron plastic sheet on prepared sub base For

18 Explained V.D.S Concrete or to any concrete base

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC.

As Per 6131_paret-II Consentration Weight one percent is recommended i.e

one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive

of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of

19 58 surface is recommended as per I.S

20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1- cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

20 23 complete.

Finishing wall with weather proof exterior emulsion paint with one coat of

exterior grade primeron wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all dirt, and remains of

21 24-e loose powdered materials.etc complete

Conveyance charges of earth lime, murrum, building rubbish, manure, garbage,

sludge, excavated rock, fly ash, aggregate of any kind etc. comp.

Note: No Bulkage will be consider at time of Payment.

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 3/43

Extra For Lead Above 0.0 km & upto 0.50 km 463.00 242.95 C.M. ₹

Extra For Lead Above 0.50 km & upto 1.00 km 463.00 256.16 C.M. ₹

Extra For Lead Above 1.00 km & upto 1.50 km 463.00 268.12 C.M. ₹

Extra For Lead Above 1.50 km & upto 2.00 km 463.00 278.18 C.M. ₹

Extra For Lead Above 2.00 km & upto 2.50 km 463.00 287.46 C.M. ₹

Extra For Lead Above 2.50 km & upto 3.00 km 463.00 296.43 C.M. ₹

Extra For Lead Above 3.00 km & upto 3.50 km 463.00 303.84 C.M. ₹

Extra For Lead Above 3.50 km & upto 4.00 km 463.00 312.45 C.M. ₹

Extra For Lead Above 4.00 km & upto 4.50 km 463.00 319.67 C.M. ₹

Extra For Lead Above 4.50 km & upto 5.00 km 463.00 326.73 C.M. ₹

Extra For Lead Above 5 km & upto 10 km 463.00 334.14 C.M. ₹

Extra For Lead ABOVE 10Km. & UP TO 15Km. 463.00 340.70 C.M. ₹

Self Extra For Lead ABOVE 15Km. & UP TO 25Km. 463.00 346.66 C.M. ₹

22 Explained Extra For Lead ABOVE 25Km. & UP TO 50Km. 463.00 352.55 C.M. ₹

WORK ABOVE PLINTH LEVEL

Providing and laying in position Ready Mixed M- 300 grade concrete for

reinforced cement conctere work , using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to

site of work in transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from transit mixer to site of laying,

excluding the cost of centering shuttering finishing and reinforcement including

cost of admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be maintained) (Cement level 475 kg ).

(d) Lintel or Copping. 80.00 ₹ 5,043.66 C.M. ₹

(f) Stair Case. 54.00 ₹ 5,043.66 C.M. ₹

23 10.3 (g) R.C.C Pardi / Wall (Any thickness) 32.00 ₹ 5,043.66 C.M. ₹

Providing formwork of ordinary timber planking so as to give a rough finish

including centering shuttering strutting and propping etc. Height of propping and

centering below supporting floor to ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete and plain concrete work in. Providing

formwork with sheathing steel sheets instead of Timber Planking.

(B) Flat surfaces such as soffits of supspened floors slabs Landings and the

like. (1) Floors etc. upto 200 mm in thickness. 3340.00 ₹ 346.02 Sq. Mt. ₹

(G) Columns Pillars / Posts and struts. (1) Square Rectangular Polygonal in

(H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders

Bressumers and Lintels not exceeding 1 M. in Depth. 2734.00 ₹ 286.17 Sq. Mt. ₹

(I) Edges of slabs and Breaks in floors and walls. 887.00 ₹ 161.75 Sq. Mt. ₹

(K) Small surfaceas such as cantiever brackets and ends of steps caps and

basses to pilasters and Columns and the like. 149.00 ₹ 698.82 Sq. Mt. ₹

(L) Chullah Hoods, weather shades Chhajjas Corbels etc. including edges. 1277.00 ₹ 249.80 Sq. Mt. ₹

(M) Staircase with sloping or stepped soffits including risers and stringers

excluding landing. 172.00 ₹ 336.57 Sq. Mt. ₹

(C) Vertical surface such as walls (any thickness) partitions and the like

24 12 including attached buttresses & string course & the like. 333.00 ₹ 323.97 Sq. Mt. ₹

Extra for additional height of propping and centering where the height of

propping and centering exceeds 4.0 M between supporting floor to ceiling

Self including temporary brick or stone pillars for supporting as required.

25 Explained (i)Height more than 4.0 M.and upto 5.0 M. 50.00 ₹ 386.48 Sq. Mt. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 4/43

Extra for additional height of propping and centering where the height of

propping and centering exceeds 4.0 M between supporting floor to ceiling

Self including temporary brick or stone pillars for supporting as required.

26 Explained (ii) Height more than 5.0 M.and upto 6.0 M. 156.00 ₹ 682.01 Sq. Mt. ₹

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level

1) Ground Floor + 1st Floor 122500.00 ₹ 75.46 KG. ₹

Brick work using common burnt clay building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)

(B) Conventional Red Bricks

Ground Floor (1st Slab) 181.00 ₹ 4,283.91 C.M. ₹

2nd Floor (3rd Slab) 181.00 ₹ 4,324.00 C.M. ₹

3rd Floor (4th Slab) 93.00 ₹ 4,364.09 C.M. ₹

28 8 4th Floor (5th Slab) 11.00 ₹ 4,404.18 C.M. ₹

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-

coarse sand ) with 2 Nos of 6mm Mild steel round bars after every three course

embedded in Cement Mortar in foundation and plinth

(B) Conventional Red Bricks

Ground Floor 370.00 ₹ 709.44 Sq. Mt. ₹

1st Floor 370.00 ₹ 709.44 Sq. Mt. ₹

2nd Floor 370.00 ₹ 715.38 Sq. Mt. ₹

Providing 10mm thick cement plaster in single coat on brick/concrete walls for

interior plastering upto floor two level and finished even and smooth in

(i)Cement mortar 1:3 (1-cement:3-sand)

(B) for ceilings and soffits of stairs

Ground Floor (1st Slab) 1085.00 ₹ 152.15 Sq. Mt. ₹

1st Floor (2nd Slab) 1085.00 ₹ 152.15 Sq. Mt. ₹

2nd Floor (3rd Slab) 1085.00 ₹ 173.26 Sq. Mt. ₹

30 22-e 3rd Floor (4th Slab) 144.00 ₹ 194.37 Sq. Mt. ₹

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and finished

even and smooth in

(i) Cement mortar 1:3 (1-cement:3-sand)

Ground Floor (1st Slab) 1528.00 ₹ 174.83 Sq. Mt. ₹

1st Floor 1528.00 ₹ 174.83 Sq. Mt. ₹

2nd Floor (3rd Slab) 1528.00 ₹ 197.99 Sq. Mt. ₹

3rd Floor (4th Slab) 383.00 ₹ 221.15 Sq. Mt. ₹

31 31-e 4th Floor (5th Slab) 0.00 ₹ 244.31 Sq. Mt. ₹

20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1- cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

32 23 complete.

Providing throating or plaster drip and moulding it to R.C.C. chajja etc. comp..

33 57-a For all floor

Providing 10 / 20 mm wide & 5-10 mm deep finished groove in plaster in line

34 57-a and level etc. Comp. For all Floor

Providing and laying Mirror polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M.

1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete.

35 14-a 25mm thick

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 5/43

Providing & Laying Mirror polished kota stone of machine cut edge slab

mm. thick in riser of steps, tread, dedo & pillars center piece not less than

1.2 mt.in width & side pieces of equal size as per design, laid on 10 mm.thick

36 15 C.M.1:3 ( 1 cement : 3 sand) joined, rubbing & polishing etc. For all Floor

Granite Stone Flooring:

Providing and laying 18 mm thk mirror polished Granite slab Flooring, Tread

over 20 mm (average) base of cement mortar 1:3 (1 cement : 3 coarse sand)

laid and jointed with grey cement slurry or Color Cement slurry matching to

Granite color including rubbing and polishing complete.

Basic Rate: Rs.

37 21 For All Floors

Granite Stone Dedo work:

Providing and laying Mirror polished granite stone slab 18 mm thick in risers of

steps, dedo and pllars laid on 10 - 15 mm thick cement mortar 1:3 (1 cement :

3 coarse sand) and jointed with gray cement slurry including half round

moulding, rubbing & polishing etc. complete.

38 21-a Basic Rate: Rs.

Granite stone Jambs & Sill of Opening:

Providing and laying 18 mm thick polished granite stone machine cut in single

piece (Max. available) in sill and jambs of door laid over 10 - 15 mm thick

cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointed with grey cement

slurry with matching pigment incl. rubbing and polishing, etc. complete colour

and shed as approved by architect engineer in charge.

39 21-b Basic Rate: Rs.

Labour Charges For Edge Finished For Granite/Kota stoe (Both Side edge

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

41 19-a cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry (Kota Stone Color and shade

42 19-b and other shade also)

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with flush pointing &

43 19-c cleaning the surface etc. complete for antiskit

Providing and laying white glazed tiles 6mm thick in flooring treads of steps

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

44 16 coarse sand ) finishing with flush pointing in white cement.

Providing and laying white glazed tiles 6mm thick in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed

45 16 with white cement slurry

Providing and laying coloured glazed tiles of the size 300 mm x 600 mm x

mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1

cement : 3 coarse sand) & jointed with white cement slurry. Cement plaster

rate is included in it.

46 17 12" X 24" SIZE ONLY

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 6/43

Flush door both sides 1.0 mm thk laminate without Frame:

Providing and fixing flush door both sides 1.0 mm thk decorative laminated

shutter (or 1 side decorative laminate towards outside & 2 mm thk gray pvc

sheet towards wet area with 0.5" x 0.5" tk wd beading patti) (Laminate of

Century Lam, Green Lam, Royal Touch or equivalent...) fabricated from 35 mm

thick solid core malemine faced three layered pre laminated flat pressed wood

based exterior grade bonded BWP/BWR synthetic resin having stamped IS

12823 grade I type II including three coats of lacquer polishing to exposed

wooden surfaces and Stainless steel decorative type designs fixtures /

fastening etc.including I.T.W. triangular batten patti of size 30m.m.x30m.m.etc.

as per architectural detailed drawing and as directed by engineer in charge.

47 51 ONLY SHUTTER, WITHOUT TEAK WOOD DOOR FRAME

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter

with wood grain raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also taking hinges & fintures. The

whole FRP frame & shutter is to be water proof weather proof, termite proof &

resistance to mild acid / alkali. Rates are to be inclusive of S.S hinges with

fastener sleeve & alluminium fixtures & fastenings.

48 54 Only FRP Shutter no frame.

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround, square or

round bars with round headed bolts and nuts or by screws. (B) ORNAMENTAL

Providing & fixing in position collapsible steel shutters with vertical channels

20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size with top & bottom

rails of T-iron 40x40x6mm. with 38mm dia. steel pulleys comp. with bolts,

locking arrangements, stoppers, handles incl. applying a priming coat of

50 47-a Redlead paint etc. comp.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory

windows including Indian teak wood frames 10 cm x 7 cm. size including

anodized alluminium fixtures and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete.

51 53 (iii) Partly panelled and partly glazed.

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 127mm x 38.10mm x 1.35mm @wt 1.384kg/m,

horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@ wt

1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm @1.398

kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm

@ 0.456kg / mt ,vertical member of size 40mm x 18mm x 1.29mm @

kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass fixing

52 53-c to frame as per details etc complete for window.

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt

horizontal Three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt

with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant

53 53-a glass fixing to frame as per details etc

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt,

horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of

0.659 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm

@ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg / mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc complete for

54 53-b window.

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 7/43

Providing and fixing standared extruded of alluminium section of size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour anodized alluminium frame

Self with 5 mm thick transparent bronze colour tinted float glass as details etc

55 Explained complete for Fix window.

Providing and fixing standared extruded of alluminium section of size 63mm x

38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame

for ventilation with 5 mm thick frosted glass as details etc complete for

56 53-d Ventilation.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

57 24-a sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

58 42 matter and sand papered smooth. on Ceiling

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

59 25 matter and sand papered smooth. on Wall

Self Extra over item 57 for every subsequent coat of wall painting with plastic

60 Explained emulsion pain of approved brand.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered materials.etc

61 24-e complete

Painting two coats (excluding priming coat) on New Wall, new steel and other

metal surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the surface of

62 24-c all dirt, dust and other foreign matter.

a) Providing & applying textured finish as per design suggested by incharge

consultant of as per manufacturers specification and directions in shade and

colour approved by consultant, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc. complete and as

directed by the architects and manufacturers.

i.e. Dholpuri finish, rain drop finish, exposed brick work finish, Exposed

concrete finish / texture etc... with finished groove. Groove design as per

Consultant's design.

Surface preparation:

Textured finish is to be applied on existing plaster surface finished smooth All

surfaces should be clean and free from loose material.

Powdery surfaces should not be painted directly. Glossy surfaces should be

lightly sanded and washed clean. Dirty surfaces should be washed down with

warm water mixed with detergent and flushed with clean water. Mould should

remove by cleaning and surfaces treated with a proprietary surface sanitizer

with residual action. Only dry surfaces should be painted. Fill cracks and other

surface imperfections with suitable patching compounds.

Substrates must contain less than 15% Wood-Moisture-Equivalent (%WME)

before painting, approved cement based renders can be coated 48 hours after

drying. Other new cementations surfaces should not be coated until 30 days

Steel work, welded in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint. all types of hollow

box sections , bending of metal beams, etc... included (A) In beams and joists,

channels angles Tees, flats, with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins conneted to common rafters and

64 46-d the like

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 8/43

Steel work, welded in built up sections, all types of hollow box sections , bending

of metal beams, framed work including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint. (D) In trussses and trussed purlins,

65 46-d upto 25 M. span and 15 M. ovarall height. (Curve Roof)

Supply & fixing factory finished cold formed Light guage steel frame sections

confirming to SP:6 (5) 1980 at site or work including riveted, bolted or welded in

builtup for all type of sections ,in framed work, cutting, hoisting, fixing in position

Self and applying primer coat of approved steel primer etc. complete as per

66 Explained structural designs & directions of Engineer-in-charge.

Providing corrugated curve / pitched roof P.P.G.I. sheet COATED WITH zinc /

aluminium alloys of class-3 roofing fixed with glavanished iron J or L Hooks,

Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete excluding the cost of purlins, Rafters and

Self Trusses. (TATA or Jindal Make)

67 Explained (1) 0.80 mm thick sheet.

Providing & Fixing the Chikenmesh - 20 guage (Crimp Jali) of approved size

applying between the RCC and masonry junction in proper line, level and plumb

with all material, labour, tools, tackles and equipment. Including providing and

68 22-c fixing the jali with nails, etc complete as directed by the site-in-charge

Granite Stone Partition with Double side Mirror Polished:

Providing and laying double side polished granite stone slab 18 mm thick in

risers of steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 (1

cement : 3 coarse sand) and jointed with gray cement slurry including half

round moulding, rubbing & polishing etc. complete.

69 21-a For Urinal Partition

Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all equipments,

tools, material, labour, etc. Standard procedure as mentioned in manufacturer's

specifications shall be strictly followed, which shall be submitted and got

approved from the authority prior to start of work. The rate shall also include

cost of drilling of hole of required diameter and depth as mentioned in

manufacturer's specification,

cleaning the hole with required air blower and other necessary tools and

tackles, positioning, providing and grouting chemical, allied fixtures and

fasteners, etc. but excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and equipments, etc.

complete as directed by the engineer-in-charge.

70 explained 6) 25 mm 40.00 ₹ 500.00 No. ₹

Providing and Fixing Box type metal letters forming composite box made from

1mm thick stainless steel plate of grade 304 having brush finish of following font

size to be fixed at Main Gate in english and or Gujrati and including fixing

charges. etc. complete as per direction of Engg. incharge. for Payment Purpose

Height of Letter will be measured.

71 Explained 300 mm ht Letter

Providing and Fixing Sinage - internal and external signage boards with Vinyle

Self Text on ACP sheet / 2 mm th. S.S. Plate etc. complete as per direction of Engg.

72 Explained incharge. 12288.00 ₹ 11.07 Sq. Inch ₹

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level upto

Self floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per

73 Explained Technical Specification 52.00 ₹ 4,483.73 Cu. Mt. ₹

Providing & Fixing Anodised Aluminum section fins of appropriate size & guage

(Horizontal / Vertical) in exterior / interior elevation along with aluminum frame of

Self appropriate size & guage, S.S. Screws, Sealant, clamping, scafolding, finishing,

74 Explained etc... & complete... 1580.00 ₹ 351.12 K.G. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 9/43

Providing and constructing sandwitch type Granite stone cooking

platform 0.6 mt. wide & 0.75 mt. height, including one end side granite stone

(Double Polish) of 1.25 mt. height & front granite stone patti of 10 cm wide,

vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with

finishing smooth with cement slurry as required and Stainless Steel sink of

mt x 0.45 mt size of approved quality and make with required all fitings &

fixitures etc. along with M.S. Angle of 50 x 50 x 5 (3.8 Kg./R. Mt) @ Every 1 Mt

interval for Platform support. comp as per instruction given by site in charge at

75 Explained (Basic rate of Granite Rs. 1347.46 / S.M.) 22.00 ₹ 2,630.00 R. Mt. ₹

Fabricating, supplying and fixing in position SS railing for staircase and balcony

with brush finish and 304 grade as per Indian Standrd and detailed drawing

including grinding, cleaning and filling the welded spots with SS finish (Only

Length will be paid for payment heigth max.1.2 mt.). The Work to be executed

as per consultant drawing .

Top Rail: S.S. Railing pipe 50 mm x 16 G ASIS 304 Grade

Vertical Support: S.S. Rialing Sq pipe 32x32 mm x 16G ASIS 304 Grade (at

every 1.0 mt to 1.20 mt c/c)

Self Horizontal Safety members: S.S. Railing pipe 16 mm x 16G ASIS 304 Grade (4

76 Explained Nos. min.) 72.00 ₹ 3,244.00 R. Mt. ₹

Providing and fixing 4mm thick exterior composite panel (ACP) along with

Supply & fixing factory finished cold formed Light guage steel frame

sections confirming to SP:6 (5) 1980 at site or work including riveted, bolted or

welded in builtup for all type of sections ,in framed work, cutting, hoisting, fixing

in position and applying primer coat of approved steel primer etc. complete as

Self per structural designs or directions of Engineer-in-charge. ACP panel color &

77 Explained pattern to be selected by Architect Consultant. 64.00 ₹ 2,227.00 Sq. Mt. ₹

Providing and fixing 12mm thick Cement Fibre Board (White or Gray color)

(exterior grade) along with Supply & fixing factory finished cold formed

Light guage steel frame sections confirming to SP:6 (5) 1980 at site or work

including riveted, bolted or welded in builtup for all type of sections ,in framed

work, cutting, hoisting, fixing in position and applying primer coat of approved

Self steel primer etc. complete as per structural designs or directions of Engineer-in-

78 Explained charge. 125.00 ₹ 1,987.00 Sq. Mt. ₹

EXPANSION JOINT ITEMS

Providing and laying and fixing 50 mm thick expansion joint by hydro cell semi

Self rigid UV resistance with high performance laminated closed cell polythene foam

79 Explained joint filler in sheet foam as directed, etc. complete.

Providing and filling the expansion joint by polymer confirm to BS 4254-1983 as

per required shade and manufactured specifi-cation by making groove of

mm x 12.5 mm lather by cutting or by repairing groove and removing mortar

Self drop or any other foreign materials including applying primer and filling required

80 Explained size (oversize of joint PU foam etc. complete

Providing and fixing 25 cm Wide & 3mm thick exterior composite panel on

Self existing expansion joint horizontally & vertically with all material, hardware,

81 Explained acessories & fittings etc completed.

Providing and fixing 60 mm diameter backup rod having minimum density 22 kg

per cum (ASTMD - 3575) & compression strength of 0.40 kg per sqm (ASTM -

Self 5249) and finishing with polysulphide sealant etc. complete. For 50 mm wide

82 Explained expansion joint

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 10/43

WATERPROOFING ITEMS

B.B.COBA WATER PROOFING:

Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces etc

consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed

with water proofing compound conforming to IS: 2645 and approved by

Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm

height including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to

mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed

with water proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1

cement :5 coarse sand ) admixed with water proofing compound conforming to

IS : 2645 and approved by Engineer-in-charge to required slope and treating

similarly the adjoining walls upto 300 mm height including rounding of junctions

of walls and slabs.

(c) After two days of proper curing applying a second coat of cement slurry

using 2.75 kg/ sqm of cement admixed with water proofing compound

conforming to IS : 2645 and approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1

cement :4 coarse sand) admixed with water proofing compound conforming to

IS : 2645 and approved by Engineerin- charge.

(e) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. "All minimum period of 10 years

after handing over the completed building by the main contractor to be finished

as directed. Stamp paper guarantee 10 years to be furnished before receiving

any payment from the client.

Self With average thickness of 120 mm and minimum thickness at khurra as

83 Explained mm. 1280.00 ₹ 1,151.00 Sq. Mt. ₹

Providing & applying 4.00 mm thk APP-modified bitumen membrane for

Waterproofing system of approved make or as per in-charge consultant's

instruction and as per√procedure mentioned below and as per latest IS Code.

Membrane sheet to be overlap min. of 100 mm at all joints. The application

surface must be cleaned of dust, debris, grease, leaves, oil and should not

Self have gaps and cracks or other irregularities to ensure proper adhesion of the

Explained membrane. 1280.00 ₹ 1,114.00 Sq. Mt. ₹

Providing and laying broken chine mosaic flooring for terrace using 12 mm to

mm broken pieces of √ glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto surface using white

cement including rounding off junctions and extending them upto 15 cm along

85 44-b the wall,clearing with water and oxalic acid etc. as directed. 989.00 ₹ 739.89 Sq. Mt. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 11/43

Providing & applying Roof

Shield or equivalent a single component monolithic

waterproof coating for Chajja top or on any other vertical or horizontal surfaces.

Highly Flexible - Crack bridging ability up to 2 mm, Self-priming - No other

primer product required, Reflective roof coating - Reduces surface temperature

up to 10°C*, Eco friendly - Nontoxic & water based coating.

APPLICATION INSTRUCTIONS

SURFACE PREPARATION:

Prepare the surface by cleaning, washing and removing dust, dirt, oil, grease

and loose particles.

Existing roof systems to be inspected and damaged or hollow portions, sharp

edges, etc. must be cut and repaired with a polymer modified mortar using

MULTIPURPOSE LATEX or equivalent, 10% by weight of cement.

Ensure minimum roof slope should be maintained in 1:100 and surface must

not be visibly wet during the application of ROOF SHIELD.

APPLICATION PROCEDURE (by brush/roller):

Stir well prior to application and apply self-priming coat of ROOF SHIELD with

50% dilution to achieve coverage of 8-10 Sq.mtr./litre".

Apply two coats of ROOF SHIELD (without dilution) with a forced coverage of 2-

2.2 Sq.mtr./litre/coat*.

It is recommended to use a 45 GSM glass fiber mesh or Geo textile membrane

of suitable size to cover angle fillets, rainwater outlets, and repaired cracks

when the first coat is still wet.

PRECAUTIONS & LIMITATIONS:

Roof Shield should be applied between 10°C to 40°C.

Allow drying for 3-4 hrs after application of each coat.

Allow the system (of 3 coats including self-priming coat) to air cure minimum

86 Explained To ensure full waterproofing of the roof, it is recommended thorough coating of 344.00 ₹ 578.00 Sq. Mt. ₹

Providing cement vata√ (10cm. x 10 cm. size) quarter round in cement mortar

87 57b 1:1 including neat cement finishing, watering etc. complete. 639.00 ₹ 23.45 R. Mt. ₹

PART 02: WATER SUPPLY AND SANITARY WORKS

Providing and fixing C.P. Pillar cock 15 mm Heavy duty swan neck, capstan

head, high pressure with screws, shanks and back nuts, wall flange etc…

C.P. Bib cock 15 mm Heavy duty with cap Flange at all floor levels, polished

89 29-b bright etc. comp.

Providing and fixing chromium plated brass half trun flush cock of approved

90 37-b quality including fixing in pipe line etc. complete.(ii) 25mm dia.

Providing & fixing C.P. Angle stop cock 15 mm Heavy duty with cap with C.P.

copper connecting pipe 450 mm long and nuts, washer and brass flange

91 29-c complete, including cutting and making good the wall where required.

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S.

brackets painted white including sutting holes and making good the same but

excluding fittings.

(A) Vitreous China

(ii) Flat Back / Under Counter washbasin 550 mm x v 400mm size.

92 38-b (i) In white colour.

Self Providing and fixing chromium plated, bottle trap with necessary couplings of

93 Explained approved quality for wash basin.

94 Explained Providing and fixing Rubber plug for sink or wash basin.

Self Providing and fixing C.P. brass waste for washbasin or sink.

95 Explained (A) 32mmdia. 24.00 ₹ 67.24 No ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 12/43

96 Explained Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 24.00 ₹ 77.97 No ₹

97 Explained Flexi Waste Pipe for Wash basin / Urinals C.P. 32 mm dia 15.00 ₹ 52.54 No ₹

Providing and fixing wsh down water closet (European type, W.C. Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1

(1-Cement : 1-fine sand) (Seal and cover to be measured and paid for

(A) vitreous, China Pattern :(i) in white colour

Providing and fixing 100mm size P or S trap for water closet squatting pan

including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-

Cement : 1-Fine sand)

(A) Vitreous China.

Providing and fixing plastic seat and cover for wash down water closer with C.P.

brass hinges and rubber buffers.

(B) Black / White plastic seal and cover.

Jet spray heavy duty with SS Braided hose 60cm long

Flushing cistern PVC with fittings 12.5 litre high level

Providing and fixing in position with clamps etc. 32mm nominal internal diameter

galvanised steel tube flush pipe for high level flushing cistern including

connecting the flush pipe with cistern and closet and making good the walls and

98 Explained (I) in White Colour

Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe , tap etc. complete.(A) White

99 29 earthenware flat back or corner type size 430mm x 260mm x 350mm. 15.00 ₹ 1,026.01 No ₹

Providing and fixing water closet squatting Pan

(Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and

trap to be measured and paid for separately)

(A) Vitreous China.

100 64 (I) Long pattern = White colour 15.00 ₹ 926.10 No ₹

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth

30 (B) 150mm x 100mm Size- P Type 6.00 ₹ 1,234.57 No ₹

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix

(1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete etc.

(i) Inside dimensions 455mm x 610mm and 450mm deep for single pipe

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 13/43

Extra over items 24.44 for every additional

depth of 0.1M. of part thereof beyond 450mm

Self depth for Brick masonry chamber.(i) for

103 Explained 455mm x 610mm size. 7.00 ₹ 239.99 No ₹

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete.

(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with

104 27 one or two inlets. 9.00 ₹ 3,624.51 No ₹

Extra over items 24.44 for every additional

depth of 0.1M. of part thereof beyond 450mm

Self depth for Brick masonry chamber.

105 Explained (ii) for 500mm x 700mm size. 5.00 ₹ 262.24 No ₹

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of

following nominal internal diameters incl. Testing of pipes and joints etc. Comp

Providing, laying and jointing in true line and

level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one

end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement including cost of all

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type

B) conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive

108 34-c solvent cement including cost of all materials. 237.00 ₹ 826.88 R.M. ₹

Providing, laying and jointing in true line and level 75 diameter UPVC SWR

Type B Pipe conforming to IS 13592-1992 with one end plain and other end

socketed with rubbering & fitting conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with No. other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

mm diameter x 149 mm length x 145 mm high at every 2000 mm center to

center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pies and joints and jointed with

109 34-c adhesive solvent cement including cost of all materials. 120.00 ₹ 515.00 R.M. ₹

Providing laying and jointing in true line and level Diameter As per Below.

U.P.V.C. Pipe ( SCH- 40 ) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 14/43

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter

with jali of the following nominal diameter of self cleaning design with C.I. scread

111 33 down or hinged grating including the cost of cutting and making good the walls. 0.00 ₹ 552.83 No ₹

112 Explained Providing& fixing PVC SWR Vent Cowl 75 mm dia 8.00 ₹ 9.32 No ₹

113 Explained Providing & fixing PVC SWR Vent Cowl 110 / 160 mm dia

Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I.

or PVC pipes including the cost of cutting holes & making good the wall etc.

Complete - 100 mm dia as per architect instructions.

Self (B) 75 to 90 mm Dia. 40.00 ₹ 55.00 No ₹

114 Explained (C) 110 mm dia to upto 150 mm dia 135.00 ₹ 70.00 No ₹

Providing erecting and fixing double coated PVC ISI water tank of required

capacity each with all necessary fittings and connection etc. complete on

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor levels,

mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to wooden plugs

116 39 with C.P.brass screws and washers etc. For all Floor 24.00 ₹ 825.48 No. ₹

Providing and filling with good quality Cinder (steam coal) as directed by

engineer in charge in sunks in layers of 15 cm thk, including watering, placing,

117 44-e ramming well etc. as directed. 80.00 ₹ 520.00 C.M. ₹

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all floor levels,

polished bright etc. comp.

Self Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.: F530004,

118 Explained Jaquar FLR-5041N 15.00 ₹ 2,167.00 No. ₹

Providing & Fixing Stainless Steel Glosy (SS 304 grade min.) Sink size of 1mm

thick with over all size 610x460 mm & bowl size 560x410x200 and approved

Self quality and make with required all fitings & adhesive, mortar, complete in the

119 Explained sandwiched granite platform by cutting the desired size in the platform. 4.00 ₹ 1,525.42 No. ₹

PART 03: - AREA DEVELOPMENT (EXTERNAL)

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

useful materials and disposing off the excavated stuff upto 50 Meter lead.

(With Machineries)

120 2 (A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

useful materials and disposing off the excavated stuff upto 50 Meter lead.

(A) Loose or soft soil

121 2 EXECUTED WITH MANUAL LABOUR

Add extra for Disposing off the excavated stuff of above items for lead of (A)

Add extra for Disposing off the excavated stuff of above items for lead of (B)

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6-

hand broken stone aggregates 40 mmnominal size) and curing complete

124 2-e excluding cost of formwork in (A) Foundation and Plinth

Providing & laying Granular sub base (GSB) confirming to Grading-V of Table

400.0 of compacted thick of 150mm with specified graded stone metal and

sand mixed in place and laid with mechanical means spreading with motor

grader and compacting with vibratory roller having minimum 80-100 KN static

weight to acheve desired density of 98% of MDD including all material, labour,

125 7-c machinery with all leads and lift etc. complete.

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 15/43

Providing & Laying 15cm thick M200 grade concrete trimix using P21 (water

reducing concrete admixture at 100 ml per bag of cement & recon 3 s fiber at

125 gm per bag of cement including making C channel 75 x 75 mm required to

maintain level,slope and thickness of the concrete road leveling of placed

concrete with surface vibrator and finishing with power floater & trowel light

brooming the surface & including cutting groove & filling of expansion joint (at

126 8-a every min. 3.0 mt) as directed by Engineer in charge.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

127 11-c binding and placing in position complete upto floor two level

Providing formwork of ordinary timber planking so as to give a rough finish

including centering shuttering strutting and propping etc. Height of propping and

centering below supporting floor to ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete and plain concrete work in.

128 12 (I) Edges of slabs and Breaks in floors and walls. 177.00 ₹ 161.75 Sq. Mt. ₹

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS 15658 :

2006 including 35 mm Sand layer for levelling and filling the joint with sand in

129 60- a, 60- b. proper line and level as per guidlines of IRC : SP 63- 2018 etc. Complete.

Providing & fixing EN type Kerbstones of VYARA or equivalent company make,

(manufactured on Vacuum wet Press Machine with hydraulic pressing of wet

concrete mixture to a minimum of 400 tons with simultaneous vacuuming, using

ECO filters, and developing a pimple finish on front side) setting in line, level

and in truly vertical position, including filling joints in 1:1 Cement mortar smooth

pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand) including watering

etc. complete and as directed by engineer in charge..

Percentage Water Absorption Not over 6%

Tolerance in size (length + breadth) ±1.5mm

Tolerance in Thickness of block ± 4mm

Minimum bending strength (Mpa)=

•The Kerbstone material must be tested at the manufacturer’s laboratory before

dispatch for: Bending strength, Water absorption, and dimensional accuracy.

Internal test report needed with every supply. Also Contractor is also required to

conduct Lab. Testing as per tender specs or as per in-charge Engineer's

Self instruction from Govt. Recg. Lab.

130 Explained Kerb Stone size: L: 600, B: 100, H: 450 mm.

Providing & fixing EN type Kerbstones of VYARA or equivalent company make,

(manufactured on Vacuum wet Press Machine with hydraulic pressing of wet

concrete mixture to a minimum of 400 tons with simultaneous vacuuming, using

ECO filters, and developing a pimple finish on front side) setting in line, level

and in truly vertical position, including filling joints in 1:1 Cement mortar smooth

pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand) including watering

etc. complete and as directed by engineer in charge..

Percentage Water Absorption Not over 6%

Tolerance in size (length + breadth) ±1.5mm

Tolerance in Thickness of block ± 4mm

Minimum bending strength (Mpa)=

•The Kerbstone material must be tested at the manufacturer’s laboratory before

dispatch for: Bending strength, Water absorption, and dimensional accuracy.

Internal test report needed with every supply. Also Contractor is also required to

conduct Lab. Testing as per tender specs or as per in-charge Engineer's

Self instruction from Govt. Recg. Lab.

131 Explained Kerb Stone size: L: 300, B: 100, H: 600 mm.

Earth work for embankment including breaking clods, dressing with all lead and

lift and including watering rolling and consolidation of subgrade in layers at

O.M.C. to required dry density including filling the depression which occur during

Self the process using power roller 8T to 10T.

132 Explained (E) From Borrow area within 3.0 KM. lead

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 16/43

Self Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

133 Explained Thickness including watering, ramming and consolidating etc. complete.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt,

134 24- c dust and other foreign matter.

Self Providing and laying 200 micron plastic sheet on prepared sub base For V.D.S /

135 Explained Trimix Concrete

Providing & laying screened cleaned pea (rounded) GRAVEL sub base of 10-

12 mm size of compacted thick of 150 mm with specified graded gravel and

mixed in place and laid with manually and compacting with plate vibrator to

Self achieve desired density including all material, labour, machinery with all leads

136 Explained and lift etc. complete.

PART 04: EXTERNAL WATER SUPPLY AND DRAINAGE WORKS

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less

than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete etc.

(i) Inside dimensions 455mm x 610mm and 450mm deep for single pipe

Extra over items 24.44 for every additional

depth of 0.1M. of part thereof beyond 450mm

Self depth for Brick masonry chamber.(i) for

138 Explained 455mm x 610mm size. 15.00 ₹ 239.99 No ₹

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete.

(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with

139 27 one or two inlets. 15.00 ₹ 3,624.51 No ₹

Extra over items 24.44 for every additional

depth of 0.1M. of part thereof beyond 450mm

Self depth for Brick masonry chamber.

140 Explained (ii) for 500mm x 700mm size. 8.00 ₹ 262.24 No ₹

Providing laying (to level or slopes) and jointing reinforced concrete Light duty

non-pressure pipes I.S. class NP2 of the following internal diameter with Spigot

and Socket ended pipes or flush jointed or collars and butt ends prepared

for joints in C.M. 1:2, watering including testing of joints complete.

Supplying and fixing reinforced concrete heavy duty non pressure pipes with

Spigot and Socket ended pipes or flush jointed or collars for culverts

carrying heavy traffic as per IS458 - 1991 specifications including setting the

pipes in C.M. 1:2 watering and laying (to level or slopes)of class NP3 of

142 68-a following internal daimeters.

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 17/43

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

useful materials and disposing off the excavated stuff upto 50 Meter lead.

(A) Loose or soft soil

143 2 EXECUTED WITH MANUAL LABOUR

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse

sand : 4-graded stone aggregate 20mm nominal size) foundation concrete

1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside

plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand)

finished with a floating coat of neat cement and making channels in cement

concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm

nominal size) finished smooth complete including curing and festing (i) Inside

size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size

560mm diameter total weight of cover and frame to be not less than 128 kgs.

(Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of

brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm.

in Cement Mortar 1:5 (1- Cement: 5-Coarse sand)

(1) A type depth 0.90 Metre for 150mm diameter sewer. 2.00 ₹ 10,920.76 Nos. ₹

144 28 (2) B type depth 1.50 Metre for 150mm diameter sewer. 2.00 ₹ 19,139.07 Nos. ₹

Part 05- A: Road Side Compound Wall

(A) WORK UPTO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp.

145 (A) Loose or Soft soil With Machinaries

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out

the soil and disposal of the surplus excavated soil as directed within a lead of

146 Meter for following diameter of pipes.

Providing and laying controlled cement concrete M.200 and curing complete

excluding the cost of formwork and reinforcement for reinforced concrete work

10.1 , 10.2 , in (A) Foundations, footings, Base of columns and Mass concrete

Providing and laying controlled cement concrete work M200 and curing

complete including the cost of form work but excluding the cost of

reinforcement of reinforced concrete work in Beams.

10.1 , 10.2 , (C.) Slabs, landing, shelves, Balconies Lintels, Beams, Girders and

148 11a, 11b Cantilever upto floor two level. 10.00 ₹ 4,460.36 C.M. ₹

Providing and laying controlled cement concrete work M200 and curing

complete including the cost of form work but excluding the cost of

10.1 , 10.2 , reinforcement of reinforced concrete work in

149 11a, 11b D) Column, Pillers, posts and struts 3.20 ₹ 4,558.20 C.M. ₹

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6-

hand broken stone aggregates 40 mmnominal size) and curing complete

excluding cost of formwork in

149 3-b (A) Foundation and Plinth 9.10 ₹ 2,976.00 C.M. ₹

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

150 132 binding and placing in position complete upto floor two level 3790.00 ₹ 75.46 Kg. ₹

Providing formwork of ordinary sheathing steel sheets so as to give a rough

finish including centering shuttering strutting and propping etc. Height of

propping and centering below supporting floor to ceiling not exceeding 4 M. and

removal of the same for in situ reinforced concrete and plain concrete work in.

(A) Foundations Footings Bases of Columns etc. and Mass concrete. 28.00 ₹ 265.70 Sq. Mt. ₹

(G) Columns Pillars / Posts and struts. (1) Square Rectangular Polygonal in

(H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders

Bressumers and Lintels not exceeding 1 M. in Depth. 87.00 ₹ 286.17 Sq. Mt. ₹

151 12 (I) Edges of slabs and Breaks in floors and walls. 4.00 ₹ 161.75 Sq. Mt. ₹

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm.in depth consolidating each

152 5 disposited layer by ramming and watering. 84.00 ₹ 234.68 C.M. ₹

(B) WORK ABOVE PLINTH LEVEL

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 18/43

Providing and laying in position Ready Mixed M- 200 grade concrete for

reinforced cement conctere work , using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to

site of work in transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from transit mixer to site of laying,

excluding the cost of centering shuttering finishing and reinforcement including

cost of admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min

153 10.5 cement level as per latest IS 456 shall be maintained) 1.00 ₹ 4,793.10 C.M. ₹

Providing and laying controlled cement concrete work M200 and curing

10.1 , 10.2 , complete including the cost of form work but Excluding the cost of

154 11a, 11b reinforcement of reinforced concrete work in

(D) Columns, Pillars posts and struts upto floor two level. 12.50 ₹ 4,558.20 C.M. ₹

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-

10.1 , 10.2 , crushed stone aggregates 20 mm nominal size) and curing complete including

155 11a, 11b cost of formwork in (A) Wall Caps / Coping 5.00 ₹ 4,006.15 C.M. ₹

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

156 132 binding and placing in position complete upto floor two level

Ground Floor 3580.00 ₹ 75.46 Kg ₹

Providing formwork of ordinary sheathing steel sheets so as to give a rough

finish including centering shuttering strutting and propping etc. Height of

propping and centering below supporting floor to ceiling not exceeding 4 M. and

removal of the same for in situ reinforced concrete and plain concrete work in.

(G) Columns Pillars / Posts and struts. (1) Square Rectangular Polygonal in

(H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders

157 12 Bressumers and Lintels not exceeding 1 M. in Depth. 35.00 ₹ 286.17 Sq. Mt. ₹

Brick work using common burnt clay building bricks having crushing strength

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)

(B) Conventional

Extra for brick work in superstructure above plinth

158 8 level upto floor two level (B) Conventional

Ground Floor 42.00 ₹ 4,283.91 C.M. ₹

20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered materials.etc

160 24-e complete including priming coat on wall 505.00 ₹ 113.40 S.M ₹

Providing 20 mm deep finished groove in plaster in line and level etc. Comp.

For all Floor (M.R.)

Steel work, welded in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint. (A)In beams and

joists, channels angles Tees, flats, with connecting plates or angle cleats as in

main and cross beams. Hip and jack rafters, purlins conneted to common

162 46-d rafters and the like 4120.00 ₹ 83.30 KG ₹

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt,

163 24-c dust and other foreign matter. 370.00 ₹ 86.94 S.M ₹

Part 05- B: Other than Road Side Compound Wall

(A) WORK UPTO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp.

(A) Loose or Soft soil With Machinaries

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out

the soil and disposal of the surplus excavated soil as directed within a lead of

Meter for following diameter of pipes.

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 19/43

Providing and laying controlled cement concrete M.200 and curing complete

excluding the cost of formwork and reinforcement for reinforced concrete work

10.1 , 10.2 , in (A) Foundations, footings, Base of columns and Mass concrete

Providing and laying controlled cement concrete work M200 and curing

complete including the cost of form work but excluding the cost of

reinforcement of reinforced concrete work in Beams.

10.1 , 10.2 , (C.) Slabs, landing, shelves, Balconies Lintels, Beams, Girders and

167 11a, 11b Cantilever upto floor two level. 8.00 ₹ 4,460.36 C.M. ₹

Providing and laying controlled cement concrete work M200 and curing

complete including the cost of form work but excluding the cost of

168 reinforcement of reinforced concrete work in

11a, 11b D) Column, Pillers, posts and struts 1.50 ₹ 4,558.20 C.M. ₹

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6-

hand broken stone aggregates 40 mmnominal size) and curing complete

excluding cost of formwork in

168 3-b (A) Foundation and Plinth 5.40 ₹ 2,976.00 C.M. ₹

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

169 132 binding and placing in position complete upto floor two level 2570.00 ₹ 75.46 Kg. ₹

Providing formwork of ordinary sheathing steel sheets so as to give a rough

finish including centering shuttering strutting and propping etc. Height of

propping and centering below supporting floor to ceiling not exceeding 4 M. and

removal of the same for in situ reinforced concrete and plain concrete work in.

(A) Foundations Footings Bases of Columns etc. and Mass concrete. 13.00 ₹ 265.70 Sq. Mt. ₹

(G) Columns Pillars / Posts and struts. (1) Square Rectangular Polygonal in

(H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders

Bressumers and Lintels not exceeding 1 M. in Depth. 66.00 ₹ 286.17 Sq. Mt. ₹

170 12 (I) Edges of slabs and Breaks in floors and walls. 4.00 ₹ 161.75 Sq. Mt. ₹

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm.in depth consolidating each

171 5 disposited layer by ramming and watering. 39.00 ₹ 234.68 C.M. ₹

(B) WORK ABOVE PLINTH LEVEL

Providing and laying in position Ready Mixed M- 200 grade concrete for

reinforced cement conctere work , using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to

site of work in transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from transit mixer to site of laying,

excluding the cost of centering shuttering finishing and reinforcement including

cost of admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min

172 10.5 cement level as per latest IS 456 shall be maintained) 1.00 ₹ 4,793.10 C.M. ₹

Providing and laying controlled cement concrete work M200 and curing

10.1 , 10.2 , complete including the cost of form work but Excluding the cost of

173 11a, 11b reinforcement of reinforced concrete work in

(D) Columns, Pillars posts and struts upto floor two level. 8.20 ₹ 4,558.20 C.M. ₹

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-

10.1 , 10.2 , crushed stone aggregates 20 mm nominal size) and curing complete including

174 11a, 11b cost of formwork in (A) Wall Caps / Coping 4.00 ₹ 4,006.15 C.M. ₹

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

175 132 binding and placing in position complete upto floor two level

Ground Floor 2410.00 ₹ 75.46 Kg ₹

Providing formwork of ordinary sheathing steel sheets so as to give a rough

finish including centering shuttering strutting and propping etc. Height of

propping and centering below supporting floor to ceiling not exceeding 4 M. and

removal of the same for in situ reinforced concrete and plain concrete work in.

(G) Columns Pillars / Posts and struts. (1) Square Rectangular Polygonal in

(H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders

176 12 Bressumers and Lintels not exceeding 1 M. in Depth. 27.00 ₹ 286.17 Sq. Mt. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 20/43

Brick work using common burnt clay building bricks having crushing strength

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)

(B) Conventional

177 8 Extra for brick work in superstructure above plinth level upto floor two level

Ground Floor 36.00 ₹ 4,283.91 C.M. ₹

20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered materials.etc

179 24-e complete including priming coat on wall 479.00 ₹ 113.40 S.M ₹

Providing 20 mm deep finished groove in plaster in line and level etc. Comp.

For all Floor (M.R.)

Steel work, welded in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint. (A)In beams and

joists, channels angles Tees, flats, with connecting plates or angle cleats as in

main and cross beams. Hip and jack rafters, purlins conneted to common

181 46-d rafters and the like 0.00 ₹ 83.30 KG ₹

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt,

182 24-c dust and other foreign matter. 0.00 ₹ 86.94 S.M ₹

Removing and scraping of old deteriorated plaster of any thickness fromm wall /

R.C.C member including stacking of serviceable material and disposal of

183 self expln. unserviceable from site of work with all lead and lift 280.00 ₹ 19.38 S.M ₹

PART-06_FIRE FIGHTING SYSTEM

Providing, Fixing & Commissioning Fire exit signs of standard size

photoluminous type. (Auto glowing in dark type)

184. Explained 1) “Fire Hydrant” ( Size 100 x 300 mm or nearest) 6.00 ₹ 505.00 No. ₹

185. Explained (2) “Fire Hose Reel” ( Size 100 x 300 mm or nearest) 6.00 ₹ 505.00 No. ₹

186. Explained (3) “DCP Extinguisher” ( Size 100 x 200 mm or nearest) 6.00 ₹ 353.50 No. ₹

187. Explained (4) “CO2 Extinguisher” ( Size 100 x 200 mm or nearest) 6.00 ₹ 353.50 No. ₹

188. Explained (5) “Fire Exits / Emergency Exit” ( Size 100 x 300 mm or nearest) 6.00 ₹ 505.00 No. ₹

189. Explained (6) “Fire alarm Manual call poin” ( Size 100 x 100 mm or nearest) 9.00 ₹ 353.50 No. ₹

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of

following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with

nut & bolts grouted in wall complete.

190. Explained [A] For 4.5 Kg Capacity 6.00 ₹ 6,591.26 No. ₹

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of

following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with

nut & bolts grouted in wall complete.

191. Explained [B] For 5.5 / 6.5 KG Capacity 12.00 ₹ 8,671.86 No. ₹

Supplying & erecting D.C.P. type fire extinguisher for following capacity

cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and

brackets confirming to IS 2171 1985 and complete erected with necessary

clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall

192. Explained [A] For 4.5 Kg Capacity 6.00 ₹ 1,712.96 No. ₹

Supplying & erecting D.C.P. type fire extinguisher for following capacity

cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and

brackets confirming to IS 2171 1985 and complete erected with necessary

clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall

193. Explained [B] For 10 KG Capacity 6.00 ₹ 2,226.04 No. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 21/43

Supplying and erecting floor mounting stand for keeping four nos. of FIRE

buckets comprising 1500 mm in length, 900 mm height frame made out of

30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with

Self hooks and duly painted with one coat of red lead and two coats of approved

194. Explained enamelled silver paint. 1.00 ₹ 942.33 No. ₹

Supplying FIRE bucket round bottom of 9 litres capacity made out of

gauge G.I. sheet with extra handle at bottom duly painted white inside and Red

Self out side with FIRE mark, filled with dry-sand and kept on existing stand

195. Explained provided or hung on wall hook. 4.00 ₹ 214.12 No. ₹

Supplying, installation testing & commissioning of approved quality

(class-c) conforming to as per IS 1239 such as tee, elbows, check nuts,

flanger, nipples etc., including cutting welding, trending in ground including

excavation and providing cement concrete blocks as support, anticorrosive

treatment with coaltar / asphalt tape as per IS 10221, refilling the trench etc. of

following sizes complete as required, etc...

Note : The piping installation has to be put to hydraulic test to1.5 times Working

pressure before applying paint or pipe coating and wrapping etc. Complete.

Self (1) 150 mm diameter 170.00 ₹ 2,399.76 R.Mt. ₹

196. Explained (2) 100 mm diameter 50.00 ₹ 1,868.50 R.Mt. ₹

Supplying, installation testing & commissioning of approved quality

(class-c) conforming to as per IS 1239 such as tee, elbows, check nuts,

flanger, nipples etc., including cutting welding, trending fixing on walls, ceiling

(using 41- tech pipe/ M.S. Angle supports work includes two coats of metal

primer and two coats of red enamel paint etc.,

Note : The piping installation has to be put to hydraulic test to1.5 times Working

pressure before applying paint or pipe coating and wrapping etc. Complete.

197. Explained (9) 65 mm Dia 40.00 ₹ 1,455.48 R. Mt. ₹

Fire Hydrant Landing Valve (Internal / External) (Stainless Steel (SS-304)

Supply, Installation and Testing of: Fire Hydrant Landing Valve with necessary

pipe fitments, hardware and consumables.

MOC:-Body: Stainless Steel (SS-304), Working Parts: Stainless Steel (SS-304),

Self Coupling: Stainless Steel (SS-304) , Standard: -ISI Marked.

198. Explained Size:-63 mm (Flange End: NB 75 mm, PCD 160 mm) 9.00 ₹ 6,046.87 Nos. ₹

Fire Hose Pipe (Delivery Hose)- 63 mm x 15 m

Supply, Installation and Testing of: Fire Hose with Hose Couplings.

Stainless steel male and female coupling bound and rivetted to hose

pipes with copper rivets and copper wire complete as required.

RRL (ISI Mark- Type A) Fire Hose.

Hose Couplings: ISI Marked Stainless Steel.

With SS Wire Binding.

Self Standard: - ISI Marked & TAC Approved Hose.

199. Explained Size:-63 mm dia x 15m long Hose. 9.00 ₹ 4,478.34 Nos. ₹

Providing, fixing, testing and commissioning of Wall mounting swing type

first aid Fire Hose Reel with drum, hanging bracket, 30 M x 25 mm dia high

Self pressure hose reel tubing as per IS:884 with shut nozzle and ball valve and all

200. Explained required accessories. 6.00 ₹ 12,513.90 Nos. ₹

Supply, Installation, Testing and Commissioning of Weather proof Standard

Fire Hose Cabinet wall mounting type (750 mm x 600 mm x 250 mm deep)

having Double door opening with necessary locking arrangement by allan key

Self suitable for housing 2 no.x15 mtrs. hose pipe, 1no. Branch pipe& nozzle

201. Explained spanner. Duly synthetic enamel painted. 6.00 ₹ 4,474.30 No ₹

Fire Hose Nozzle- Short Branch Pipe Nozzle.

Supply, Installation and Testing of: Short Branch-pipe Nozzle.

MOC: Stainless Steel (SS-304).

Standard: ISI Marked, Heavy Quality. IS : 903, suitable for 10 Kg / sq.cm

operating pressure and suitable for interconnections to hose pipe coupling as

202. Explained Size:- 63 mm X 20 mm 9.00 ₹ 1,664.48 Nos. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 22/43

Supplying and fixing specially designed gunmetal orifice plates made out of

mm thick stainless steel (Grade 304) on hydrant outlets of landing valves

including distant pieces of suitable size for adjustment of delivery pressure of

Self 3.5 kg/ sq.cm as required by LPA complete with necessary companion flanges,

203. Explained nuts, bolts, gaskets etc. complete. 6.00 ₹ 1,303.91 Nos. ₹

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type

Self sprinklers of rating with required accessories :

204. Explained Pendent Sprinkler 57°C standard response (K-80) UL Listed 54.00 ₹ 360.71 Nos. ₹

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL

Listed) of stainless steel complete with 15 NPT on reducer thread with

maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with

branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT

female thread with reducer, nipple, 2 side brackets,center bracket, stockbar of

Self following sizes complete as required etc of following sizes as required. (700

205. Explained mm) 18.00 ₹ 1,243.56 Nos. ₹

MAIN FIRE PUMP ROOM ,TANK AND ACCESSORIES

Supplying & installing completely testing & commissioning of centrifugal main

fire pump (electrical driven) for hydrant main / sprinkler main with cast iron

casing & bronze impeller & internal parts, make as approved by ISO/CFO for

fire duty, complete with coupling, coupling guard necessary base frame,

foundation bolts, RCC foundation, antivibration paid , capable of discharging

2280 lt/min against 65 mtr. head against all losses complete. The scope shall

also include electrical TEFC motor, operated on 3-ph, 440-V, 50 Hz, 2900 RPM

Syn. speed with ‘B’ class winding, make as approved by LFA. The pump shall

be capable of giving not less than 150% discharge at a head not less than 65%

of the rated head. Motor to be of continuous rating etc. complete.

Each incomer and Outgoing feeder should be capable for protection against

Overload, Short Circuit and Phase reversal condition and shall be capable to

communicate with BMS . System should be capable to compensate for frictional

losses at lower flows. All alarms should be displayed in the controller and BMS.

System should be equipped with dry running protection. Indication of all type of

faults / on-off status / electrical parameters shall be available on panel and

central IBMS monitors. On-off operation for all pumps shall be available on BMS

206. Explained Pump - Motor : Discharge : 2280 LPM, Head 70 mtr 1.00 ₹ 3,14,867.50 Set ₹

Supply, installation, testing & commissioning of centrifugal monoblock type fire

booster pump with suction &delivery pipe with motor having speed 2900 RPM,

3 phase, AC, 50 Hz supply, incoming cable from fire panel to local operating

Self station with end terminations, earthing, base plate, antivibration paid etc.

207. Explained complete 1.00 ₹ 65,902.50 Set. ₹

Starter Panel for Fire Booster Pump

Design, manufacture, supply ,installation, testing and commissioning of star

delta starter control panels suitable for 415V, 3 phase, 4 wire, 50 hz power

distribution system . Control panel shall consists of 40A Breaker , contactor,

Over load relay and other require components to finish satisfactory work.

Control panel should be communicate with pressure switch. Necessasary

integration between control panel and pressure switch shall be part of scope.

scope shall also include all required accessories for dry run protection & shall

prevent the pump from dry running

All components in the control panel shall be as per type 2 coordination of

respective OEM. (Fire Booster Pump Panel). (Cost of wiring with pressure

Self switches / switching on and switching off the pumps locally and remotely as per

208. Explained the drawing and as per local CFO requirement) 1.00 ₹ 1,01,000.00 Nos. ₹

SITC of precharged air vessel (size 450mm dia x 1500 mm height) with

adequate pressure switches with valves to operate as per operating sequence

including 25 mm drain valve, air release valve with stop cock on top, 25 mm

inlet with isolation valve & the vessel shall be painted inside & outside. The tank

Self shall be fabricated from 8 mm thick MS plate with painting.

209. Explained Air Vessel : 450 mm dia x 1500 mm h 1.00 ₹ 44,036.00 Nos. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 23/43

Supplying & installing completely testing & commissioning centrifugal main fire

pump (diesel driven) with cast iron casing & bronze or phosphor bronze

internal parts, make as approved by ISO/CFO for fire duty, complete with

coupling, coupling guard necessary base frame, foundation bolts, RCC

foundation,antivibration paid , capable of discharging 2280 lt/min against

mtr. head against all losses complete with suitable diesel engine of speed

matching the pump speed ,auto start facility with battery & battery charger,

necessary wiring, fuel tank ,exhaust system, foundation gauges & wired for

automatic start of the water pump on drop of pressure in the hydrant and

sprinkler system. The pump should confirm to LFA / SEB & and IE

Regulations. The pump shall be capable of giving not less than 150%

discharge at a head not less than 65% of the rated head.

Pumping System shall be capable to communicate with BMS . System should

be capable to compensate for frictional losses at lower flows. All alarms should

be displayed in the controller and BMS. Indication of on-off status parameters

shall be available on panel and central IBMS monitors. On-off operation for all

Self pumps shall be available on BMS system.

210. Explained Pump - Diesel Engine : Discharge : 2280 LPM, Head : 70 mtr. 1.00 ₹ 5,76,280.75 Set. ₹

Supplying, installing, testing and commissioning of Vetrical Centrifugal jockey

pump -motor with discharge 180 lpm against 70 mtr. head with 3 phase,

V, 50 Hz motor having 2900 RPM, complete with coupling, coupling guard

necessary base frame, foundation bolts, RCC foundation,antivibration paid , as

per site conditions and instructions of site engineer-in-charge including proper

fixing, The electrical motor for the pump should comply as per Specification.

The scope shall also include necessary coupling, coupling guard, base frame,

foundation bolts, RCC foundation, etc. complete.

Each incomer and Outgoing feeder should be capable for protection against

Overload, Short Circuit and Phase reversal condition and shall be capable to

communicate with BMS . System should be capable to compensate for frictional

losses at lower flows. All alarms should be displayed in the controller and BMS.

System should be equipped with dry running protection. Indication of all type of

faults / on-off status / electrical parameters shall be available on panel and

Self central IBMS monitors. On-off operation for all pumps shall be available on BMS

211. Explained system. 1.00 ₹ 1,42,788.75 Set. ₹

Supplying, Installation, Testing and commissioning Sewage water submersible

pumping sets of CI casing & impeller, SS shaft, including with inbuilt water level

sensors for operating the pumps automatically and all accessories suitable for

operation on 220 V-240 V, single phase, 50 Hz. AC supply etc. as reqd.

Self > 10 mm solid handling capacity,Minimum Capacity - 50 LPM,Minimum Head

212. Explained > 13.5 Mtr 1.00 ₹ 19,873.27 Set. ₹

Supplying & erecting approved make 3 phase motor control cubical panel (

Star - Delta) made from16 G. CRCA sheet duly painted with epoxy powder

painted inside and outside with hinged doors and locking arrangement,

consisting of suitable size of ON- OFF isolator (AC - 3/23 duty) main fuses,

single phasing preventer cum water level. Guard (Complete unit), Toggle switch

to by pass Single phase preventer cum WLG, indicating lamps for R- Y- B

phases, over load relay, Automatic water level controller, Ammeter & Voltmeter

each with two way selector switch incoming wires duly socket Crimped, Panel

to be erected on angle iron frame grouted on wall as directed. Star Delta &

main contactor, overload relay, thermal / Electronic Star delta cutoff timer, start -

stop push buttons. The isolator overload relay & contactors of L& T, Siemens or

Cuttler Hamer make only. Panel to be erected on angle iron frame ground on

213. Explained (F) S / D up to 30 H.P. 1.00 ₹ 23,821.86 Nos. ₹

SITC of electronic type water level indicator with LED panel, with probe & all

Self control wiring to operate the system automatic/manual & shall prevent the pump

214. Explained from dry running 1.00 ₹ 24,164.25 Nos. ₹

Supply, Installation, Testing and Commissioning of 150 mm dia Glycerine

filled Pressure Gauge of range 0 - 15 Kg / cm² conforming to IS - 3624 having

bourdon tube of stainless steel 310 in cast aluminium, stove enameled, black,

weather proof case with outer, screwed aluminium bezel and complete with

necessary U-type stainless steel siphon tube and cock including providing

Self suitably painted angle iron support to the tube etc.as per specification complete

215. Explained as required. 1.00 ₹ 7,878.00 Nos. ₹

Self Providing, fixing, testing and commissioning of Pressure Switch with Needle

216. Explained Valve. 1.00 ₹ 1,523.08 Set ₹

Self Providing, fixing, testing and commissioning of 25 mm dia Air Release Valve

217. Explained and Ball Valve assembly on top of each riser for Air release system. 2.00 ₹ 3,425.92 Nos. ₹

Self Providing, fixing, testing and commissioning Pressure Relieaf Valve 25mm dia

218. Explained with Ball Valve. 4.00 ₹ 5,888.30 No. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 24/43

Supplying, installing and commissioning C.I.flanged pressure relief valve with

Self CI body,suitable flanges, nuts, bolts, gaskets etc. complete.

219. Explained a)100 mm Dia 1.00 ₹ 22,220.00 No. ₹

Self Supply, installation , testing comissioning of pressure gauge of 0-21 kg/sq.cm

220. Explained range with 15 mm dia stop cock valve,piping etc as required 2.00 ₹ 1,212.00 No. ₹

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating

with bronze / gunmetal seat duly ISI marked complete with nuts, bolts, washers,

gaskets conforming to IS 13095 of following sizes as required :

Self d) 150 mm Dia 2.00 ₹ 8,785.99 No. ₹

221. Explained e) 200 mm Dia 2.00 ₹ 13,883.07 No. ₹

Providing, installation, testing and commissioning of non return valve of

following sizes confirming to IS:5312 complete with rubber gasket, GI bolts,

nuts,washers etc.as required :

Self c) 150 mm Dia 2.00 ₹ 17,752.77 Set ₹

222. Explained D) 50 mm Dia 1.00 ₹ 5,285.92 Set ₹

Providing, installation, testing and commissioning of stainless steel Y-strainer

fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia

holes with stainless steel flange.

223. Explained A) 100 mm Dia 1.00 ₹ 6,514.50 No. ₹

Providing, installation, testing and commissioning of stainless steel Y-strainer

fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia

holes with stainless steel flange.

224. Explained B) 200 mm Dia 2.00 ₹ 20,326.58 No. ₹

Supplying and fixing of fire brigade connection of cast iron body with gun

metal male instantaneous inlet couplings complete with cap and chain as reqd.

for suitable dia MS pipe connection conforming to IS

225. Explained 2 WAY / 4- WAY- 100 mm dia M.S. Pipe 2.00 ₹ 6,079.84 No. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 25/43

SITC of fire brigade draw out connection with 100 mm MS suction pipe &

Self mm dia foot valve. The scope shall also include required valves, piping, M.S

226. Explained cabinet as required 1.00 ₹ 21,896.80 No. ₹

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv

grade ISI marked copper wires of following size to be erected as directed.

Self (e) 1.50 Sq.mm 3 core round PVC sheathed 275.00 ₹ 58.58 R. Mt. ₹

227. Explained f) 1.50 Sq.mm 4 core round PVC sheathed 200.00 ₹ 84.84 R. Mt. ₹

Supplying, installation, testing & commissioning of manual call boxes of MS

Self construction in surface/recess with stainless steel chain & hammer assembly

228. Explained complete with glass and push button etc. as required. 6.00 ₹ 466.62 No. ₹

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

Self fittings & Junction boxes fixed with adhesive solution & Clamps with following

229. Explained dia of pipes, in approved manner as directed

Supply, Installation, Testing and Commissioning of Single action Manual Pull

Station. Shock and Vibration Resistant, pull Down Lever Remains Down Until

Reset. Shall be Polarity Insensitive (with all mounting accessories , complete

Self with Junction Box for mooting on Surface, Cable lugs at Ends, cable

230. Explained compression glands, cable tags and ferruling. 8.00 ₹ 606.00 No. ₹

Supply, Installation, Testing and Commissioning of Conventional Sounder /

Hooter cum strobe having tone settings with range of 95dbA and field

selectable 15/30/75/110 candelas.(with all mounting accessories , complete

Self with Junction Box for mooting on surface, cable lugs at ends, cable

231. Explained compression glands, cable tags and Ferruling.) 8.00 ₹ 606.00 No. ₹

Testing of Fire Fighting System, Preparation of Design & Drawings Approval of

Fire Hydrant & Entire Fire Protection System from Local Fire Authority and any

other relevant statutory authority at initial (PRE- NOC / OPINION) and POST

CONSTRUCTION NOC or at various other stages of work, including

preparation of report / drawings as per fire authority requirement. for pre opinion

lison charges to be given to indharge consultant. Contractor shall include cost

of all liason work which are not explicitly mentioned above but are mandatory to

Self have fire authority approval (any statutory charges will be paid extra).

232. Explained (Including Pre-NOC and Post Construction NOC from Fire authority) 1.00 ₹ 1,01,000.00 L.S. ₹

Providing and fixing, testing and commissioning of conventional Smoke

233. Explained 3M, or equivalent 45.00 ₹ 1,787.70 Nos. ₹

Providing and fixing, testing and commissioning of conventional Fire Alarm

Self Panel 4 Zone

234. Explained Ravel/Agni/System Sensor, or equivalent 1.00 ₹ 24,431.90 Nos. ₹

Self Supply and Commissioning of Fire Alarm Cable 1.5 SQMM,2 CORE, Copper

235. Explained Armored Cable Make : RR / Polycable 450.00 ₹ 131.30 R. Mt. ₹

236. Explained Provided Core Cutting in RCC beam /slab core cutter. (75mm dia) 30.00 ₹ 757.50 Nos. ₹

237. Explained Provided Core Cutting in RCC beam /slab core cutter. (125mm dia) 10.00 ₹ 1,010.00 Nos. ₹

238. Explained Provided Core Cutting in RCC beam /slab core cutter. (150mm dia) 10.00 ₹ 1,212.00 Nos. ₹

Heat / FIRE RESISTANT COATING OF CABLE: Supply and apply intumescent

based coating Hilti 678on cables / bunch cables & cable tray for at least 1 mtr in

every 14 Mtrs for horizontal runs and to entire length of vertical runs. The

coating shall have a density in the range of 1.2 to 1.4 Kg / L. The coating shall

be non-toxic, asbestos and halogen free and shall have good mechanical

strength. The coating shall comply with IEC 332 part 3 (1992). The product shall

carry test certificate for mold resistance rating of 0 as determined by ASTMG21-

96. The product should have a VOC content of approx... 60g/l as per LEED

2009 and should not have any de-rating effect on the cable. Manufacturer

should submit relevant certificates for mentioned attributes. Coating shall be

carried out by approved machine spraying system which will yield uniform

thickness and better finish. Fire stop installation shall be done by Hilti Accredited

Fire stop Specialty Contractor (HAFSC) and in accordance with guidelines.

Firestop specialty Contractor need to submit work completion certificate along

Self with installation report through Hilti documentation Software CFS DM for

239. Explained periodic inspection & maintenance purpose. 20.00 ₹ 3,726.90 K.G. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 26/43

FIRE STOP FOAM Hilti CP 620 on both sides of wall, with minimum 2 Hours fire

rating when tested in accordance with UL 1479 / ASTM-E 814, for horizontal

openings in floors or slabs made of concrete / masonry or Gypsum after

passing service lines like cable trays or cables / cable bundles. The expanding

foam expands seven times its volume to fill the cavity at the time of dispensing

the material and shall fully cure within two minutes after dispensing. The product

shall be age tested as per Dafstb and DIBT Standards. The product shall

provide water tightness when tested for W rating as per UL standards and shall

carry test certificate for sound insulation of 50 dB when tested in accordance

with ASTM E 90. The product shall carry test certificate for mold resistance

rating 0 as determined by ASTM G21-96 and shall have a VOC content of

approx... 1.3g/l as per LEED 2009. The product shall be tested in accordance

with IEC 60068-2-57: 1999-11 (Environment Testing) as per Part 2-57: Test for

Vibration-Time –history method and VERTEQQII for seismic zone 4. The

system shall be UL listed & classified and product shall bear the UL and FM

approval logo on the packing. If none of UL test certificate comply with actual

application, an EJ document prepared by a qualified personnel and based on

nearest third party tested & approved systems like UL test certificates & in

accordance with IFC guidelines shall be produced by manufacturer. A Fire stop

submittal shall be produced by manufacturer, in accordance with approved

passive fire protection method statement, for technical approval. Fire stop

installation shall be done by Hilti Accredited Fire Stop specialty Contractor

(HAFSC) and in accordance with Hilti guidelines and UL system test certificates

Self along with installation report through Hilti documentation Software CFC DM for

240. Explained periodic inspection & maintenance purpose. 40.00 ₹ 4,504.60 Nos. ₹

Testing, Commissionning, Demo, refilling of all extinguser, Fire NOC

renewal etc work

Self Testing, Commissionning, Demo, refilling of all extinguser,Fire NOC renewal etc

241. Explained Charges of Fire System for first Year.(after one year DLP) 1.00 ₹ 2,52,622.08 Job ₹

Self Testing, Commissionning, Demo, refilling of all extinguser,Fire NOC renewal etc

242. Explained Charges of Fire System for second Year.(after one year DLP) 1.00 ₹ 2,52,622.08 Job ₹

Self Testing, Commissionning, Demo, refilling of all extinguser,Fire NOC renewal etc

243. Explained Charges of Fire System for Third year.(after one year DLP) 1.00 ₹ 2,52,622.08 Job ₹

Self Testing, Commissionning, Demo, refilling of all extinguser,Fire NOC renewal etc

244. Explained Charges of Fire System for Forth year.(after one year DLP) 1.00 ₹ 2,52,622.08 Job ₹

Self Testing, Commissionning, Demo, refilling of all extinguser,Fire NOC renewal etc

245. Explained Charges of Fire System for Fifth year.(after one year DLP) 1.00 ₹ 2,52,622.08 Job ₹

PART 07: PERCOLATION WELL / Recharge Borewell

Boring/drilling bore well of required dia for casing/

strainer pipe, by suitable method prescribed in IS: 2800 (part I), including

collecting samples from different strata, preparing and submitting strata chart/

bore log, including hire & running charges of all equipments, tools, plants &

Self machineries required for the job, all complete as per direction of Engineer-in-

246 Explained charge, upto 90 metre depth below ground level. 600 mm dia 125.00 ₹ 592.05 R.MT. ₹

Supplying, assembling, lowering and fixing in vertical

position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel

screwed and socketed/plain ended casing pipes of required dia, conforming to

IS: 4270, of reputed & approved make, including painted with outside surface

with two coats of anticorrosive paint of approved brand and manufacture,

including required hire & labour charges, fittings & accessories, all complete, for

Self all depths, as per direction of Engineer-incharge. 150 mm nominal size dia

247 Explained having minimum wallthickness 5.00 mm 125.00 ₹ 1,675.00 R.MT. ₹

Supplying, assembling, lowering and fixing in vertical

position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted

(having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel

ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and

approved make, having wall thickness not less than 5.40 mm, including painted

with outside surface with two coats of anticorrosive bitumestic paint of approved

brand and manufacture,including hire & labour charges, fittings & accessories,

all complete, for all depths, as per direction of Engineer -in-charge.

248 Explained 150 mm nominal size dia 125.00 ₹ 1,790.00 R.MT. ₹

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to

Self cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as

249 Explained per direction of Engineer-in-charge. 10.00 ₹ 1,302.30 Cu.Mt. ₹

Supplying, filling, spreading & leveling gravels of size

range 5 mm to 10 mm, in the recharge pit, over the

Self existing layer of boulders, in required thickness, for all leads & lifts, all complete

250 Explained as per direction of Engineer-incharge. 10.00 ₹ 1,309.00 Cu.Mt. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 27/43

Supplying, filling, spreading & leveling coarse sand of

size range 1.5 mm to 2 mm in recharge pit, in required

Self thickness over gravel layer, for all leads & lifts, all

251 Explained complete as per direction of Engineer -incharge. 10.00 ₹ 1,309.00 Cu.Mt. ₹

Gravel packing in tubewell construction in accordance with IS: 4097, including

Self providing gravel fine / medium / coarse, in required grading & sizes as per

252 Explained actual requirement, all complete as per direction of Engineer in- charge. 40.00 ₹ 1,479.25 Cu.Mt. ₹

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to

establish maximum rate of usable water yield without sand content (beyond

permissible limit), with required capacity air compressor, running the

compressor for required time till well is fully developed, measuring yield of well

by “V” notch method or any other approved method, measuring static level &

draw down etc. by step draw down method, collecting water samples & getting

tested in approved laboratory, i/c disinfection of tubewell, all complete, including

Self hire & labour charges of air compressor, tools & accessories etc., all as per

253 Explained requirement and direction of Engineer incharge 10.00 ₹ 916.80 Hour ₹

Providing and fixing suitable size threaded mild steel

Self cap or spot welded plate to the top of bore well housing / casing pipe,

254 Explained removable as per requirement, all complete for borewell of: 150 mm dia 5.00 ₹ 210.75 Each ₹

Providing and fixing M.S. clamp of required dia to the

Self top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including

255 Explained necessary bolts & nuts of required size complete. 5.00 ₹ 1,609.25 Each ₹

Self Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe

256 Explained assembly of tubewell as per IS:2800 (part I). 5.00 ₹ 281.75 Each ₹

PART 08: Internal Electrical-

Sub PART 01: Internal Wiring

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade ZFLR/HFFR PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

Self (f) with medium class Rigid PVC pipe and accessories erected concealed

257 Explained in wall/ceiling complete Cat III 632.00 ₹ 605.85 Point ₹

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade ZFLR/HFFR PVC insulated

multi strand copper wires, in below type of pipe to be erected complete with

earth continuity and necessary connection with primary light with accessories

erected on Metal / PVC / wooden box covered covered with appropriate front

plate modules erected on / in wall / ceiling for open / concealed wiring. with

necessary Lamp holder / ceiling rose / H.D.Connector as directed.as per pipe

erected with following type of accessories.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains

for Secondary Point.

Self (f) with medium class Rigid PVC pipe and accessories erected concealed in

258 Explained wall/ceiling complete 8.00 ₹ 208.95 Point ₹

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade ZFLR/HFFR PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

Self in wall/ceiling complete

259 Explained Cat.III 240.00 ₹ 841.05 Point ₹

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade ZFLR/HFFR PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in

Self wall/ceiling complete

Explained Cat-III 68.00 ₹ 636.30 Point ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 28/43

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

(f) with medium class Rigid PVC pipe and accessories erected concealed in

Self wall/ceiling complete

Explained Cat-III (ZFLR/HFFR) 8.00 ₹ 930.30 Point ₹

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm (

green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

Self wall/ceiling complete

260 Explained Cat-III. (ZFLR/HFFR) 4.00 ₹ 1,087.80 Point ₹

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in wall /

Self ceiling with following type accessories

261 Explained Cat. III (ZFLR/HFFR) 154.00 ₹ 321.30 Point ₹

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade ZFLR/HFFR PVC

insulated multi strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories erected concealed in

Self wall/ceiling complete

262 Explained Cat. III 16.00 ₹ 753.90 Point ₹

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured/

metallic/white front plate , modules erected with necessary connections as per

site situation directed by Engineer In charge. (ZFLR/HFFR)

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat. III 6.00 ₹ 166.95 Each ₹

(4) TV Co-axial Socket outlet - Cat III 6.00 ₹ 166.95 Each ₹

(5) Electronic hum Free steps EME Fan regulator. CAT III 240.00 ₹ 414.75 Each ₹

(7) Blank Plate Single Cat. III 48.00 ₹ 26.25 Each ₹

(11) 6 Amps. Bell Push CAT III 2.00 ₹ 157.50 Each ₹

263 Explained (22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete. CAT-III. 8.00 ₹ 517.65 Each ₹

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

264 Explained (c). 32 mm 140.00 ₹ 54.00 Mtr. ₹

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc. complete of following sizes.

265 Explained (4) 40 mm 40.00 ₹ 37.00 Mtr. ₹

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having

double-locking arrangement with grooves, trunking of size not below 12.5 mm in

height as per IS with accessories of PVC/Resin polypropylene not below

mm thick duly sealed in joint & erected on wall / ceiling of following size .

266 Explained (2) 25 mm 10.00 ₹ 31.00 Mtr. ₹

(A) Supplying and laying UPVC cable trucking system comprising unplasticised

polyvinyl, chloride rigid material with ignition free & flame proof confirming BS.

With All necessary accessories (Like elbow, tee, bank etc..) and measuring of

following sizes.

Self (1) 75 mm x 50 mm trucking 10.00 ₹ 275.00 Mtr. ₹

267 Explained (3) 50 mm x 50 mm trunking 10.00 ₹ 187.00 Mtr. ₹

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be erected

in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

Self (e) 3 wire 6 sq. mm 480.00 ₹ 199.00 Mtr. ₹

268 Explained (h) 4 wire 6 sq. mm 100.00 ₹ 322.00 Mtr. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 29/43

providing and erecting Mains with ISI marked electrolyte stranded copper

conductor, Non PVC Zero Halogen free fire retardant insulated copper

conductor, insulated wire (HRFR) conforms to IS-694, erected in existing pipe

with 1.5sq. mm copper conductor of same specifications for earth continuity of

following size.

Self [j] 3 wire 2.5 sq.mm 860.00 ₹ 127.00 Mtr. ₹

269 Explained [k] 3 wire 4.0 sq.mm 200.00 ₹ 174.00 Mtr. ₹

Supplying & erecting approved make Telephone Cable electrolytic copper

conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape

& sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring

& confirming to C-DOT erected in existing pipe. of following size of conductors &

nos.of pairs. With necessary connections.

[A] Conductor Size 0.5 mm

Self (a) Unarmoured

270 Explained (2) Two Pair 160.00 ₹ 20.00 Mtr. ₹

Sub Part-02: Light Fixtures

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

(A) Tube Light with integral driver

Self (i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

271 Explained Cat-III 52.00 ₹ 164.00 Each ₹

Self (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

272 Explained CAT III 160.00 ₹ 370.00 Each ₹

Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder.

Self (b) 5 to 8 watts

273 Explained CAT III 8.00 ₹ 111.00 Each ₹

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure

die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

(i) 9 watts,Surge-2 KV

Cat.: III. 4.00 ₹ 218.00 Each ₹

Self (ii) 15 watts, Surge-2 KV, CAT- III 20.00 ₹ 423.00 Each ₹

274 Explained (iii) 20 watts, Surge-2 KV, CAT- III 328.00 ₹ 584.00 Each ₹

(B) LED Panel Light with provision for Plane front frame with translucent

Self cover fixed to housing complete.IP20

275 Explained (vi) 36 watts, 24" x 24", Surge- 2KV, CAT: III 1.00 ₹ 1,777.00 Each ₹

Sub Part-03 LT Switchgear, Distribution Boards & LT Panel

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 30/43

Providing and erecting Approved make microprocessor type of mccb in

place of conventional for Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A.

with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s.

with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

The Enclosures should be used of same company of MCCBs to be used.

R-Y-B Indicator LED

ON-OFF-TRIP Indicator LED

MFM with with CTS.

276 Explained ICS=100% of ICU only. Cat III. 1.00 ₹ 12,722.30 Each ₹

Providing and erecting Approved make microprocessor type of mccb in

place of conventional for Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. and above at 415 V . having normal current

rating 200A. with variable thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing. The Enclosures should be

used of same company of MCCBs to be used.

R-Y-B Indicator LED

ON-OFF-TRIP Indicator LED

MFM with with CTS.

277 Explained ICS=100% of ICU only. Cat III. 1.00 ₹ 25,617.15 Each ₹

Providing and erecting busbar chamber confirming to IS-375 fabricated from

G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and

necessary busbar supports with COPPER busbar having current density not

more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped

with colour insulation tape for phase sequence, three phase & neutral each

suitable for following current capacity with necessary painting mounted on wall

or pedestal frame of required size with necessary connections. ₹

Self (A) Suitable for 63/100 Amp. capacity 1.00 ₹ 4,378.00 Mtr. ₹

278 Explained (B) Suitable for 200 Amp. capacity 2.00 ₹ 5,675.00 Mtr. ₹

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system

Self and having breaking capacity 10 KA to be erected in existing box. confirming to

279 Explained IS 8828/1996 with ISI Mark 12.00 ₹ 295.00 Each ₹

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be

Self erected in existing box. confirming to IS 8828/1996 with ISI Mark .

280 Explained Cat.III 72.00 ₹ 122.00 Each ₹

Providing & erecting 240 V MCB double pole switch for motor & inductive load

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity ₹

Self (A) 6 to 32 Amp. Cat.III 32.00 ₹ 326.00 Each ₹

281 Explained (B) 40 Amp. Cat.III 8.00 ₹ 359.00 Each ₹

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having

following capacity.

Self (a) 6 to 32 Amp. Cat-III 4.00 ₹ 303.00 Each ₹

282 Explained (b) 40 Amp. Cat-III 4.00 ₹ 322.00 Each ₹

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having

following capacity.

Self (a) 6 to 32 Amp. Cat-III 4.00 ₹ 631.00 Each ₹

283 Explained (b) 40 Amp. Cat-III 4.00 ₹ 696.00 Each ₹

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity.

(a) 6 to 32 Amp. Cat-III 1.00 ₹ 649.00 Each ₹

Self (b) 40 Amp. Cat-III 4.00 ₹ 729.00 Each ₹

284 Explained (c) 63 Amp. Cat-III 1.00 ₹ 803.00 Each ₹

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp.

Plug socket, company fabricated powder coated sheet steel enclosure erected

Self as directed with connection.

285 Explained [B] 15 Amp. / 5 Amp. Five pin Universal Socket- CAT III. 1.00 ₹ 719.00 Each ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 31/43

Supplying & erecting approved make Electronics Starter and relay for air

conditioners in ABS plastic moulded housing. Company fabricated with bakelite

terminal for connection with silver coating bimetallic contact in switching device

for o/p with following features.

(1) Low Voltage Protection below 130 V

(2) High Voltage protection above 270 V

(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22 Amp. (inverse time

Self (4) Indicating LEDs for AC on LV, HV, O/L, T/D

286 Explained (5) With unique feature of 3 minute of time delay 5.00 ₹ 966.00 Each ₹

Self Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos.

287 Explained MCB 10.00 ₹ 52.00 Each ₹

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

(A) single phase incoming and horizontal single phase outgoing

(a) single door (IP-30)

(B) three phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI)

(a) sheet steel single door

(B) three phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI)

Self (a) sheet steel single door

288 Explained (iii) 8 way 4.00 ₹ 2,421.00 Each ₹

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity

of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V. having characteristic of quick action & tripping

with all advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed.

(i) 25 Amps.DP, Cat-III 1.00 ₹ 2,145.00 Each ₹

Self (ii) 40Amps. DP, Cat-III 1.00 ₹ 2,434.00 Each ₹

289 Explained (iii) 63 Amps. DP, Cat-III 2.00 ₹ 2,891.00 Each ₹

Providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not incorporate any

electronic component for following Max. rating erected as directed.

(i) 25 Amps.FP- Cat. III 4.00 ₹ 2,798.00 Each ₹

Self (ii) 40Amps. FP- Cat. III 4.00 ₹ 2,872.00 Each ₹

290 Explained (iii) 63 Amps. FP- Cat. III 4.00 ₹ 3,311.00 Each ₹

Supplying & erecting approved make RCCB + MCB (Electro magnetic type

only) working on residual current device having 10 KA short circuit breaking

capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS

12640 test knob facility trip free mechanism operating for rated leakage at

nominal ten volt, complete erected including all materials lugs screws etc.

[b] 32A / 40A, 2 pole Single Phase

Cat. II 4.00 ₹ 2,118.00 Each ₹

[e] 32A to 40 A, 4 Pole Three Phase

Cat. II 4.00 ₹ 2,360.00 Each ₹

Self [f] 63A, 4 pole Three Phase

291 Explained Cat. II 4.00 ₹ 3,087.00 Each ₹

providng and erecting Approved make energy meter 3 phase 4 wire

unbalanced load rating, 10A to 60 Amp. based on ASIC(Application specific

Integral Circuits) digital technology with accuracy Class - 1 , temper proof, free

from effect of external magnetic field with 3 phase indication, earth & impulse

indication, 6 digit electro mechanical impulse counter, suitable work on 120 V to

Self 300V per phase 45-55 HZ, housed in robust enclosure with erection as

292 Explained directed. CAT III 1.00 ₹ 2,670.00 No. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 32/43

Supplying & erecting IP 55 grade following size section pillar fabricated from

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle with

cable clamps to be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and 45 cm high bricks

work finishing with plaster etc. hinged double door internally supported on both

with internal and outside looking arrangement with look and keys in duplicate

x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt

for erecting Bakelite sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test & followed by IS 2147 of

Self (A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with

293 Explained angle iron legs 95 cm long made from 40 X 40 X 6 mm thick MS angle. 1.00 ₹ 16,526.00 No. ₹

Providing and erecting Approved make Earth fault Relay suitable to mount with

inter connection suitable to following size of moulded case circuit breaker

having CT ratio & MCCB rating as following along with shunt trip 220V AC. with

all internal connections & complete erected in existing M.S.housing..

Providing and erecting Approved make Earth fault Relay suitable to mount with

inter connection suitable to following size of moulded case circuit breaker

having CT ratio & MCCB rating as following along with shunt trip 220V AC. with

Self all internal connections & complete erected in existing M.S.housing..

Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with erection

of supplied switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip complete.

The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved

manufacturers with following size.

(C) The standard companies switch gear shall be used and only manufacturers

as per IEC 61439 for beneficial use.

295 Explained (ii) with 550 mm. Depth 8.00 ₹ 21,116.00 Sq. mt. ₹

Providing and erecting ,Fabricating the box type items made from M.S. Sheet

with A.I. supports, wings, doors, handles other hardware materials as per

Self requirement design with finishing by three tank powder coating processed

296 Explained inside and outside painted, erected as directed including minor civil work. 8.00 ₹ 179.00 Kgs ₹

Sub PART 04: Earthing System

Providing and erecting required size HOT deep Galvanised iron strip for

Self earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using

297 Explained proper clamp. 60.00 ₹ 77.00 Kgs ₹

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary test report must be

(b)For Electrical installation up to 11 KV in normal soil.

Self Length of Pipe : 2.00 mtrs

298 Explained Back filling Compound :1 no. Bag of 25 Kg. 4.00 ₹ 5,703.00 No. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 33/43

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Self Length of Pipe : 3.00 mtrs

299 Explained Back filling Compound :2 nos Bags of 25 Kg. 2.00 ₹ 8,551.00 No. ₹

Sub PART 05: LT Cables & Cable Termination

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

Self (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) 10.00 ₹ 584.00 Mtr. ₹

300 Explained (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) 175.00 ₹ 642.00 Mtr. ₹

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables.

Self (b) 4 core 6 Sq. Mm 5.00 ₹ 150.00 Mtr. ₹

301 Explained (C) 4 core 10 Sq. mm 75.00 ₹ 167.00 Mtr. ₹

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

Self (B) 4 core 25 Sq. mm 75.00 ₹ 227.00 Mtr. ₹

302 Explained (C) 4 core 35 Sq. mm 75.00 ₹ 304.00 Mtr. ₹

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

Self existing trench / pipe at road crossing or floor of following size of cables.

303 Explained (c) 4 core 6 Sq. mm 10.00 ₹ 631.00 Mtr. ₹

Making trench in soft soil of suitable width of 90 cms deep for laying cable or

Self locating the fault all over the run and backfilling the same and making the

304 Explained surface as normal ground. 150.00 ₹ 55.00 Mtr. ₹

Providing & laying. R.C.C. hume pipe for cable to be laid 90 cms. below ground

across the road crossing or on floor with necessary material in an approved

Self manner and making the ground as per original.

305 Explained (E)150 mm dia 135.00 ₹ 261.00 Mtr. ₹

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories

of same material at required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable

Self (A)50 mm outer dia 30.00 ₹ 62.00 Mtr. ₹

306 Explained (C))90 mm outer dia 10.00 ₹ 95.00 Mtr. ₹

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape

etc for following size of cables.

Self (c) 2 to 4 core 10 Sq. mm 25.00 ₹ 38.00 Each ₹

307 Explained (d) 2 to 4 core 16 Sq. mm 15.00 ₹ 47.00 Each ₹

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

Self (C) 16/25 Sq.mm. 10.00 ₹ 15.00 Each ₹

308 Explained (D) 35/50 Sq.mm. 10.00 ₹ 20.00 Each ₹

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

Self (D) 3 & 1/2 core 95 Sq. mm 10.00 ₹ 130.00 Each ₹

309 Explained (E) 3 & 1/2 core 120 Sq. mm 30.00 ₹ 139.00 Each ₹

Supplying and erecting HYLAM sheet on existing angle iron frame.for following

310 Explained (C) 6mm 6.00 ₹ 1,145.00 Sq. mt. ₹

310 Explained Supplying and erecting nuwood 12 mm thick on existing angle iron frame. 3.00 ₹ 289.00 Sq. mt. ₹

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Self Submersible copper cable approved make of following Size.

311 Explained (b) 3 Core x 2.5 Sq. mm. 100.00 ₹ 103.00 Mtr. ₹

Sub PART 06: Fan & Related Accessories

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 34/43

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with , canopy &

Self cms. down rod erected with earthing.(Make shall be approved by Engineer in

312 Explained charge)) 240.00 ₹ 1,929.00 Each ₹

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

Self down rod erected duly painted for fan complete with proper insulation

313 Explained without leckage and earthing. 144.00 ₹ 107.00 Mtr. ₹

Supplying & erecting approved make low noise decorative exhaust fan having

Self square frame ABS body with inbuilt lowers & square frame.

314 Explained 250mm with 1350 RPM Cat.II 2.00 ₹ 1,353.00 No. ₹

Supplying & erecting single phase approved make industrial exhaust fan

suitable for medium duty ring mounted low noise operation suitable for medium

duty having following dia size and maximum speed in RPM

Self [B] 380 mm dia 900 RPM, Cat II 6.00 ₹ 2,713.00 Each ₹

315 Explained [D] 450 mm dia and 900 RPM. Cat.II 28.00 ₹ 3,306.00 Each ₹

316 Explained Providing suitable M.S. louver shutter of the Exhaust fan. 34.00 ₹ 365.00 Each ₹

Supplying and erecting approved make double ball bearing oscillating type

Heavy duty bracket fan with Aluminium Blades A.C. 23OV. 50cy/s wall mounted

with height adjustment and rotary tilting device complete with guard, wall

Self bracket,mounting accessories as directed.

317 Explained (B) 600mm 1.00 ₹ 6,375.00 Each ₹

Sub PART 07: Motor & Starters

Providing & erecting open well horizontal mono block submersible pump set

with cast iron body, complete including suitable motor starter panel for three

phase submersible motor having

Self For 2 HP Single phase set suitable for 200 LPM @ 25 mtr head suitable for

318 Explained 50 mm dia delivery pipe or simillar capacity. CAT II 2.00 ₹ 12,327.90 Each ₹

Installation and starting of open well horizontal mono block submersible pump

Self set of 2 HP Single phase at desired location with all types of accessories,

319 Explained fittings, parts, labour, etc… complete along with testing of the same. 2.00 ₹ 4,000.00 Each ₹

Supplying & erecting approved make Automatic liquid level controller 6A. with

sensor testing as per instruction of Engineer in charge on site complete with

Self wiring connection with existing wires , with copper conductor from pump to

320 Explained upper and lower tank. 5.00 ₹ 2,332.00 Each ₹

Supplying & erecting approved make motor control cubical panel (Direct - on -

line) made from 16 G. CRCA sheet duly epoxy powder painted inside and

outside with hinged doors and locking, arrangement consisting of suitable size

of ON- OFF isolator (AC - 3/23duty) main fuses, single phasing preventer,

indicating lamps for R- Y - B phases, overload relay, Automatic water level

controller, Ammeter, Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay, start - stop push

buttons, to be erected on angle iron frame grouted on wall as directed. The

Self isolator, overload relay & contactors will be of L&T, Siemens or BCH make only.

321 Explained (a) DOL up to 5.0 H.P. 1.00 ₹ 7,646.00 Each ₹

Sub Part-08: Cable Trays

Providing and fixing approved make Perforated C type cable tray. Made from

sheet steel. The cable tray should be single or double bended as per required

and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and

washers etc. erected on existing support as per Specification and as per

instruction of engineer in charge..

322 Explained (5) 300 X 50 X 2.0 mm Thick 72.00 ₹ 616.00 R.mt. ₹

Providing and fixing approved make 'T' Junction for Perforated C type cable

tray. Made from sheet steel. The Junction should be bended as per IS

2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759.

with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc.

erected on existing support as per Specification and as per instruction of

engineer in charge.. OF FOLLOWING SIZE

323 Explained (5)300 X 50 X 2.0 mm Thick 16.00 ₹ 289.00 Ea. ₹

Providing and fixing approved make '90° Elbow' for Perforated C type cable

tray. Made from sheet steel. The Junction should be bended as per IS

2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759.

with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc.

erected on existing support as per Specification and as per instruction of

engineer in charge..

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 35/43

Self (3)150 X 50 X 1.6 mm Thick 90° Elbow 16.00 ₹ 162.00 Ea. ₹

324 Explained (5) 300 X 50 X 2.0 mm Thick 90° Elbow 16.00 ₹ 243.00 Ea. ₹

Sub PART 09: Water Coolers & Purifire

Providing and erecting water cooler having storage capacity 80Ltr. & cooling

capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚ C within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating coil, thermostats, relay etc. complete with

Self necessary inlet & outlet connection. The body of water cooler will be made from

325 Explained Stainless Steel. 4.00 ₹ 53,976.00 Nos. ₹

Self Supplying and erecting water filter cum purifier with ultra violate technology.

326 Explained (Aquaguard / waterdoc model or equivalent symphony/ crystal/HUL model) 4.00 ₹ 5,371.00 Nos. ₹

Sub PART 10: Liasioning Work:

Charges for doing liasioning work for obtaining the necessary clearances from

the Electrical inspector / competent Authorities for the total Electrical installation,

Elevator Inspection,co-ordinating with various agencies. All necessary

drawings, calculations, test certificates, etc. as required by these authorities

shall be prepared and furnished by the EPC Vendor / contracting agency at his

own cost. Any modification / rectification as required by these authorities shall

be carried out by the EPC Vendor / contracting agency at his own cost.

Calculation of Load, Preparation of all types of SLD for Panel, SLD for Buildings,

DB Details drawings from authorised Electrical Engineer with sign and stamp for

sucessfull execution of project (working drawings). The fees required to be paid

to these authorities for inspection shall be borne by Owner on production of

documentary evidences.

Charges for obtaining new Torront / GEB Meter according to building / project

Self electrical load and other requirement along with all types of charges, liasioning

327 Explained fees, etc… complete. 1.00 ₹ 10,000.00 Nos. ₹

Sub PART 11: CCTV Work:

Supply,installation,Testing and Commissioning of 5MP, 1/2.7"CMOS,IP Fix

Dome camera, 2592x1944@30fps IR 2592x1944@30fps IR Range:30M,120dB

WDR Triple-Stream (Main/Sub/Third),Built-in Mic, SD Card Slot up to 256GB,

Multiple AI Support,Metal, IP67. Built-in-mic , 3.6mm , Color 0.003lux @

F1.6(AGC ON) ; B/W 0 lux @ IR ON, H.265+/H.265/H.264 Video compressions,

Privacy masking Off/On (4 Zone, Rectangle), Face Recognition (FR), Human &

Vehicle Detection (PD & VD), Perimeter Intrusion Detection (PID),Line Crossing

Detection (LCD), Cross Counting (CC), Stationary Object Detection (SOD),Heat

Map (HM), Crowd Density Detection (CD), Queue Length Detection (QD), Rare

Sound Detection (RSD), Main Stream @30fps,ONVIF( Profile S/G/T)

Self CE,FCC,RHOS,BIS, ISO9001 certified, DC12V / POE ( IEEE802.3af)

328 Explained (Including Five year free maintenance with guarantee) 28.00 ₹ 9,208.52 Nos. ₹

Supply,installation,Testing and Commissioning of 5 MP IP Fix Bullet, 1/2.7"

CMOS,2592x1944@30fps IR Range: 30M, 120dB WDR Triple-Stream

(Main/Sub/Third), Built-in Mic, SD Card Slot up to 256GB, Multiple AI Support,

Metal, IP67,Built-in-mic , 3.6mm , Color 0.003lux @ F1.6(AGC ON) ; B/W 0 lux

@ IR ON, H.265+/H.265/H.264 Video Compressions, Privacy masking Off/On

(4 Zone, Rectangle), Face Recognition (FR), Human & Vehicle Detection (PD &

VD), Perimeter Intrusion Detection (PID),Line Crossing Detection (LCD), Cross

Counting (CC), Stationary Object Detection (SOD),Heat Map (HM), Crowd

Density Detection (CD), Queue Length Detection (QD), Rare Sound Detection

Self (RSD), Main Stream @30fps,ONVIF( Profile S/G/T) CE,FCC,RHOS,BIS,

329 Explained ISO9001 certified, DC12V / POE ( IEEE802.3af) 16.00 ₹ 9,114.87 Nos. ₹

Providing & fixing on wall or on table top LED Smart TV LG 139 cm (55 inches)

UA82 Series 4K Ultra HD (3840 x 2160) Smart webOS LED TV 55UA82006LA

or equivalent company make from Samsung, Sony. Rate includes table top

Self stand/ wall mounted kit, fixing of the same as desired location, screwing /

330 Explained bolting, Transportation, etc... complete... 2.00 ₹ 49,950.00 Nos. ₹

Networking Enclosures & Accessories Supply, Installation, Testing &

Commission ingot 24U Wall mount closed rack with front glass door, fan tray on

Self top, perforated rear doors, keyboard tray with shelf. Casters & 2 nos vertical

331 Explained power strip with std etc as required. 2.00 ₹ 4,767.00 No. ₹

Supply, Installation, Testing and Comissioning of 32 Channel Network Video

Recorder (NVR), Support 8CH@2MP, H.264 Video Compression, HDMI, VGA

output, up to 4 SATA interface each with max 6 TB support, bandwidth

Self mbps, CE FCC, BIS, Operating Temp -10 deg to 50 deg C, USB and serial

332 Explained Interface (Including Five year free maintenance with guarantee) 1.00 ₹ 68,113.00 No. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 36/43

SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo

ports Advanced L2 switching and security features L2+ Static Routing Optional

Self “standard mode” or “surveillance mode” management user interface 193 W

333 Explained PoE budget (Including Five year free maintenance with guarantee) 1.00 ₹ 31,680.00 No. ₹

SITC of LIU 12 PORT Rack Mount - Loaded (LC) SM (Including Five year free

Self maintenance with guarantee) [Approved by Competent Authority i.e. not Below

334 Explained the rank of Executive Engineer ] 1.00 ₹ 6,833.00 No. ₹

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded

Self [Approved by Competent Authority i.e. not Below the rank of Executive

335 Explained Engineer] (Including Five year free maintenance with guarantee) 2.00 ₹ 4,357.00 No. ₹

S.I.T.C. of 32CH, 4SATA NVR having Through put: 320 Mbps incoming /

320Mbps outgoing, 4SATA interfaces, up to 12TB connect camera at up to

12MP, 2 x RJ45, 2HDMI Port,1 VGA Alarm input/out : 16in / 1out, Play back

1080P: 480fps,Max. 16CH,Audio: G.711a,G.711u Video:H264/H265,WEB IE

10/11,Safari V12.1 above, Edge V.79 above,FireFox V.52 above, cloud storage

( Dropbox & Google Drive),Onvif ( profile S/G/T) USB2.0*1 front, USB3.0*1

Rear,Face Detection & recognition,Vehicle & Pedestrian Detection,Perimeter

intrusion detection,Cross counting,Heat Map,crowd density detection,Object

detection,Video Tempering,QueueLength detection, License plate

Self detection,Rare sound detection,Region Entrance & Existing,

336 Explained CE,FCC,RHOS,BIS ,ISO 9001 certified. 1.00 ₹ 31,989.45 No. ₹

SITC of PIGTAIL LC SM SIMPLEX LENGTH- 1m (Including Five year free

Self maintenance with guarantee) [Approved by Competent Authority i.e. not Below

337 Explained the rank of Executive Engineer] 1.00 ₹ 772.00 No. ₹

Supplying & erecting approved make LAN cable of following size in existing pipe

Self as per direction

338 Explained [C] CAT - 6 (For Indoor & Outdoor application) 1760.00 ₹ 47.00 Mtrs. ₹

Self SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less [Approved

339 Explained by Competent Authority i.e. not Below the rank of Executive Engineer ] 44.00 ₹ 155.00 No. ₹

Self SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag less [Approved

340 Explained by Competent Authority i.e. not Below the rank of Executive Engineer ] 44.00 ₹ 199.00 No. ₹

SITC of 8 x 10/100/1000BASE-T PoE ports 2 x Gigabit SFP ports Advanced L2

switching and security features L2+ Static Routing Optional “standard mode” or

Self “surveillance mode” management user interface 65W PoE budget (Including

341 Explained Five year free maintenance with guarantee) 1.00 ₹ 18,218.00 No. ₹

Supplying and erecting approved make online Un-interruptible Power Supply

system comprising flat cum-boost charger with IGBT base rectifier & Inverter &

sealed maintenance free SMF batteries. The charger having operating capacity

for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load

power factor with battery, over/under voltage output with over load & short

circuit protection equipment. The system housed in CRC sheet duly powder

coated paint with following power backup.with MS painted batteries stand, 10%

Self Overload capacity for momentary load.

342 Explained (A) 1 KVA with 1Hr Backup 1.00 ₹ 29,323.00 No. ₹

343 Explained SITC of 1.5 mtr HDMI Cable 2.00 ₹ 525.00 No. ₹

344 Explained SITC of HDMI Switch 1.00 ₹ 2,100.00 No. ₹

Supply, Installation, Testing and Comissioning of Western Dlgital 10TB WD

Purple Pro Surveillance SATA HDD 3.5 Internal Hard Drive HDD 7200 RPM

512MB Cache CMR - WD102PURP or equivalent company make from Segate

Self / Toshiba. Rate includes fixing the same in surveillance system, setting up

345 Explained required license software, etc... complete... 2.00 ₹ 42,980.00 No. ₹

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as

per IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed

Self for laying of cable. The pipes as following size of dia & weight per 6 mtr.

346 Explained (A) 40 mm inner Dia. 100.00 ₹ 107.00 R. Mt. ₹

Supply, Installation, Testing and Comissioning of NETGEAR Cloud Managed

Wireless Access Point, seamless roaming, fast roming, Beam forming, Mesh

networking, security :WPA3, wall\ceiling mount (Kit included) WAX615 - WiFi

Dual-Band AX3000 Speed | Up to 256 Client Devices | 802.11ax | Insight

Remote Management | PoE+ Powered or AC Adapter (Included). Rate includes

Self fixing the same, setting up required license software, installation in the computer

347 Explained system, etc... complete... 1.00 ₹ 37,170.00 No. ₹

SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo

ports Advanced L2 switching and security features L2+ Static Routing Optional

“standard mode” or “surveillance mode” management user interface

Self 193 W PoE budget [Approved by Competent Authority i.e. not Below the rank of

348 Explained Executive Engineer ] 1.00 ₹ 31,680.00 No. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 37/43

SITC of Face Plate - Single (Keystone Jack,square)

Self [Approved by Competent Authority i.e. not Below the rank of Executive

349 Explained Engineer ] 44.00 ₹ 90.00 No. ₹

SITC of Face Plate - Dual (Keystone Jack,square)

Self [Approved by Competent Authority i.e. not Below the rank of Executive

350 Explained Engineer ] 44.00 ₹ 100.00 No. ₹

SITC of Jack Cat 6 Keystone UTP

Self [Approved by Competent Authority i.e. not Below the rank of Executive

351 Explained Engineer ] 44.00 ₹ 160.00 No. ₹

Supply, installation, fixing, testing and commissioning of PVC Junction box for

Self CCTV Camera, IP65, outdoor application. Junction Box size will be as per

352 Explained vendor's requirement and site condition. 44.00 ₹ 440.00 No. ₹

Sub PART 12: P. A. System Work:

Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

LED Meter :5 LED Arrays

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with

automatic changeover from AC to Battery operation, duly protected by wrong

Self Battery Polarity connections. [[Approved by Competent Authority i.e. not Below

353 Explained the rank of Executive Engineer ] 1.00 ₹ 13,424.00 No. ₹

Supplying & erecting Booster Amplifier having power output of 25OW (RMS,),

suitable to obtain combined power output of two, with 6 mike inputs & suitable to

be used independently as a 250watt amplifier in combination with mike & mixer.

The booster Amplifier shall be without mike &Aux. input channels, The system

Self shall be suitable to operate on 24OV. A.C. & 24 Volts D.C. Battery. [[Approved

354 Explained by Competent Authority i.e. not Below the rank of Executive Engineer ] 1.00 ₹ 11,492.00 No. ₹

Supplying & erecting Mixing Console having channels, Audio mixer with. Echo

facility for live performance, Auditorium & stadiums, having following features &

facilities. [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

(a)input Channels :- Each channel has separate 6.25mm size balanced

phone jack for mike & line for balanced & unbalanced signals.

(b)Individual gain control for sating optimum level for minimum noise.

(c)BASS, MID & TREBLE ‘ controls Separately for each input channel.

(d)ECHO control for each channel

(e)PAN control for echo channel for left or right output

(f) AUX Control : To control , level of the channel in final mix to AUX sound

(g)Channel ON/OFF switch

(h)ECHO Section :- ECHO, reverb & Chorus effect can be added to all input

channel by different setting of Delay, Reverb & Level control.

(i)Tape section

(j)Aux. send & return For sending Pre-feeder output of channel for monitoring or

adding a special effect unit.

(k)Mono / Stereo output controls

(L)Master faders to control over left & right output

(m) Head phone output for monitoring purpose.

Technical specification:

(a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts

(b)MIC Output Impedance/gain -2 K Ohms/ 62 dB

(c)Line Output Balance/42 dB —- 20 K ohms

(d) Impedance / Gain :- 10Kohms unbalance / 42 dB

(e)frequency Response - 30 Hz- 20 KHz L / R Line Output ( + 0, -1 dB )

(f)Equalization Bass/ - + / - 12 dB at 100Hz Mid / Treble 2 KHz /

(g) Outputs, Line Output Line Output Low : -10 dB / -2 dBM Line

Output High : 0 dBM / +17 dBM (775 mv / 5.5 V )

(g) Outputs, Line Output Line Output Low : -10 dB / -2 dBM Line

Output High : 0 dBM / +17 dBM (775 mv / 5.5 V )

(h) S/N ratio Line Output Level : > 70 dB (0 dB, 0.775V) .

The Console shall be mounted on standard Rack, The channel of following

355 Explained (A) 14 Channel Audio Mixer with ECHO 1.00 ₹ 21,845.00 No. ₹

Supplying & erecting four channel Echo Mixer Pre-amplifier with following

(i) Suitable to operate on 24OV.A.C. & 12 V D.C. Battery supply

(ii) B.B.D. Delay system ECHO facility on all inputs through ECHO volume,

Repeat & Delay system.

(iii) Peak LED for setting optimum distortion free input levels

(iv) Two outputs, variable for line & fixed for recording

Self (v)Compatible with Audio Mixing consoles. [[Approved by Competent Authority

356 Explained i.e. not Below the rank of Executive Engineer ] 1.00 ₹ 4,272.00 No. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 38/43

Supplying and erecting Weather & Dust resistant sound column with Aluminium

case & Aluminium mesh grille with foam layer under grill, rotary- switch for

selecting power taps / impedance having frequency response 150-20000 Hz

with following specifications . [ Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ]

(a) With 4 speakers, capacity of power handling 45W (MAX) & 30 W RMS,

Self each speaker have impedance of respectively 300 ohms / 30 W,

357 Explained 500ohms/20W,I -K.ohms/10 W, 2K. ohms / 5W. 2.00 ₹ 2,442.00 No. ₹

Supplying and erecting Weather & Dust resistant sound column with Aluminium

case & Aluminium mesh grille with foam layer under grill, rotary- switch for

selecting power taps / impedance having frequency response 150-20000 Hz

with following specifications . [ Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ]

(b) With 2 speakers having power handling capacity of 23W(MAX) & 15 W

Self (RMS), each speaker have impedance of respectively 670 ohms/ 15W,

358 Explained K.ohms/ 10W, 2K.ohms / 5W & 4 K. ohms / 2.5W. 4.00 ₹ 1,629.00 No. ₹

Supplying & erecting recess wall mounting speaker with 5W rated input power

3.3 K. Ohms / 3W impedance, 100 - 10000 Hz frequency response with 6 inch

dia. cone type 8 ohms speakers duly fitted in ABS plastic cabinet of colour

match with wall or ceiling of following size. [Approved by Competent Authority

Self i.e. not Below the rank of Executive Engineer ] ₹

359 Explained (b)Square shaped 260 x 260mm size speaker 36.00 ₹ 703.00 No. ₹

Supplying microphones stands with sturdy mechanism, treble free movement &

positioning of microphones, free from rust with superior quality of chrome plating

with following size. [Approved by Competent Authority i.e. not Below the rank of

Executive Engineer] ₹

Self (c)Fixed height 91 cms. & extendable up to 62 cms. with round base of dia.

360 Explained cms. 4.00 ₹ 441.00 No. ₹

Supplying, installing and testing approved make microphone for All purpose,

with frequency response of 100 - 11000 Hz, having sensitivity 2.2mv / Pa &

impedance 500 Ohms (LO- Z) supplied with quick detachable holder, 6 mtr twin

Self core cable & 3 pin XLR connector. [Approved by Competent Authority i.e. not

361 Explained Below the rank of Executive Engineer ] 4.00 ₹ 1,272.00 No. ₹

Providing & fixing Multistrand Annealed bare copper conductor with PVC

Self insulated RR Kables/ Finolex / Polycab make 2 Core 0.75 Sq.mm. Speaker wire

362 Explained in existing PVC Conduit. 300.00 ₹ 51.00 R. Mt. ₹

Providing & fixing Multistrand Annealed bare copper conductor with PVC

Self insulated RR Kables/ Finolex / Polycab make 2 Core 1.00 Sq.mm. Speaker wire

363 Explained in existing PVC Conduit. 500.00 ₹ 61.00 R. Mt. ₹

Providing & fixing Multistrand Annealed bare copper conductor with PVC

Self insulated RR Kables/ Finolex / Polycab make 2 Core 1.50 Sq.mm. Speaker wire

364 Explained in existing PVC Conduit. 400.00 ₹ 85.00 R. Mt. ₹

PART 09: External Electrification Work

Sub part A:- LT Switchgear, LT Panel, DBs & MCBs

Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse Unit

Cubical type for panel mounting complete with operating mechanism suitable to

operate on 415V A.C. With HRC fuses of suitable load confirming to IS.

(Part I & III). of following capacities

Self (B) 63 Amp

365. Explained Cat.III 1.00 ₹ 2,535.00 Ea. ₹

Supplying & erecting approved make Four Pole 415V change over switch

interior for panel mounting with operating mechanism A.C.23 duty confirming to

Self (A)32-40A; CAT- III 1.00 ₹ 2,586.00 Ea ₹

366. Explained (B)63 A; CAT- III 1.00 ₹ 4,738.00 Ea ₹

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

Self operate on 240 V A.C. system and having breaking capacity 10 KA to be

367. Explained erected in existing box. confirming to IS 8828/1996 with ISI Mark. Cat. III 14.00 ₹ 122.00 Ea. ₹

Providing & erecting 240 V MCB double pole switch for motor & inductive

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity.

Self (A) 6 to 32 Amp. CAT III. 1.00 ₹ 326.00 Ea. ₹

368. Explained (B) 40 Amp. CAT III. 1.00 ₹ 359.00 Ea. ₹

Providing & erecting 240 V MCB double pole switch for lighting Load (B

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box

having following capacity

Self (A) 6 to 32 Amp. CAT III. 1.00 ₹ 303.00 Ea. ₹

369. Explained (B) 40 Amp. CAT III. 1.00 ₹ 322.00 Ea. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 39/43

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having

following capacity.

Self (a) 6 to 32 Amp. Cat-III 1.00 ₹ 631.00 Ea. ₹

370. Explained (b) 40 Amp. Cat-III 1.00 ₹ 696.00 Ea. ₹

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity.

Self (a) 6 to 32 Amp. Cat-III 1.00 ₹ 649.00 Ea. ₹

371. Explained (b) 40 Amp. Cat-III 1.00 ₹ 729.00 Ea. ₹

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity

of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation

on single phase 240 V. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component. for following

Max. rating erected as directed

(i) 25 Amps.DP- Cat. III 1.00 ₹ 2,798.00 Ea ₹

Self (ii) 40Amps. DP- Cat. III 1.00 ₹ 2,872.00 Ea ₹

372. Explained (iii) 63 Amps. DP- Cat. III 1.00 ₹ 3,311.00 Ea ₹

providng and erecting Approved make energy meter 3 phase 4 wire

unbalanced load rating, 10A to 60 Amp. based on ASIC(Application specific

Integral Circuits) digital technology with accuracy Class - 1 , temper proof, free

from effect of external magnetic field with 3 phase indication, earth & impulse

indication, 6 digit electro mechanical impulse counter, suitable work on 120 V to

300V per phase 45-55 HZ, housed in robust enclosure with erection as

373. directed. Cat. III 1.00 ₹ 2,670.00 Ea. ₹

Supplying & erecting approved make SMC press moulded composite FRP.

loop-in, loop-out approx. 2mm thick box complete with bakelite connector strip

4way & hinged doors having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt

Self of following size of box.

374. Explained (b) 250mm x 200mm x 100mm [deep] 14.00 ₹ 510.00 Ea. ₹

Sub part B:- Cables,Wires & Termination

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable

Self 1.1 KV.grade to be erected as directed of following size.

375. Explained (a)3 core 2.5 Sq. mm 320.00 ₹ 50.00 Mtr. ₹

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable

KV grade to be erected as directed of following size.

(K) 4 core 4 Sq. mm 1.00 ₹ 298.00 Mtr. ₹

Self (L) 4 core 6 Sq. mm 1.00 ₹ 451.00 Mtr. ₹

376. Explained (M) 4 core 10 Sq. mm 1.00 ₹ 711.00 Mtr. ₹

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables.

Self (b) 4 core 6 Sq. Mm 240.00 ₹ 150.00 Mtr. ₹

377. Explained (c) 4 core 10 Sq. Mm 80.00 ₹ 167.00 Mtr. ₹

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cables.

Self 4 core 4 Sq. mm 5.00 ₹ 451.00 Mtr. ₹

Explained 4 core 6 Sq. mm 5.00 ₹ 631.00 Mtr. ₹

378. Explained 4 core 10 Sq. mm 5.00 ₹ 838.00 Mtr. ₹

Making trench in soft soil of suitable width of 90 cms deep for laying cable or

Self locating the fault all over the run and backfilling the same and making the

379. Explained surface as normal ground. 240.00 ₹ 55.00 Mtr. ₹

Providing & laying. R.C.C. hume pipe for cable to be laid 90 cms. below ground

across the road crossing or on floor with necessary material in an approved

manner and making the ground as per original.

Self ( C ) 300 mm dia 20.00 ₹ 340.00 Mtr. ₹

380. Explained (E) 150 mm dia 50.00 ₹ 261.00 Mtr. ₹

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories

of same material at required depth for laying of cable. below ground / road

surface for enclosing cable .

(A)50 mm outer dia 204.00 ₹ 62.00 Mtr. ₹

Self (C))90 mm outer dia 36.00 ₹ 95.00 Mtr. ₹

381. Explained (D)120 mm outer dia. 1.00 ₹ 136.00 Mtr. ₹

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 40/43

Cable Termination

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape

etc for following size of cables.

(b) 2 to 4 core 6 Sq. mm 20.00 ₹ 38.00 Each ₹

(c) 2 to 4 core 10 Sq. mm 20.00 ₹ 38.00 Each ₹

Self (d) 2 to 4 core 16 Sq. mm 1.00 ₹ 47.00 Each ₹

382. Explained (e) 2 to 4 core 25 Sq. mm 1.00 ₹ 51.00 Each ₹

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

383. Explained (a) 3 core 35/50 Sq. mm 1.00 ₹ 66.00 Each ₹

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

Self (A) 3 & 1/2 / 4 core 25 Sq. mm 1.00 ₹ 66.00 Each ₹

384. Explained (B) 3 & 1/2 core 35/50 Sq. mm 1.00 ₹ 75.00 Each ₹

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

Self (B) 10 Sq.mm 10.00 ₹ 13.00 Each ₹

385. Explained (C) 16/25 Sq.mm. 1.00 ₹ 15.00 Each ₹

Solderless crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

Self (C) 16 Sq.mm. 1.00 ₹ 12.00 Each ₹

386. Explained (D) 25 Sq.mm. 1.00 ₹ 15.00 Each ₹

Sub part C:- Outdoor Lighting Item

Supply of approved make FRP Pole having following specifications: FRP Light

Pole made by CNC filament winding machine using thermoset resin

polyester/epoxy resin system) having minimum 62% glass content. The pole

should be in one piece and tapered round in shape, having smooth finish and

should be totally free from corrosion as well as non conductive & shock proof

Pole should be provided with FRP Anchor Base and it should be heavy duty, or

MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV

resistance and pigmented. A highly weather resistant polyurethane coating shall

be applied to the pole after applying suitable primer system that ensures proper

adhesion of the paint. Minimum coating thickness shall be 80 to 100 micron.

Deflection of the pole shall not exceed more than 10% of the length of pole for

the given load“ Pole should be generally made as per the dimensional data,

performance criteria and some interchangeability features of poles as per

standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable

termination box with necessary accessories . The size of pole and type of

installation with foundation as per manufacturer details and site requirement are

(1) Suitable for base plate mounting single arm Bracket.

[H] Overall length of 6 Mtr. Average Thickness: 7.5mm

Self Top/ Bottom OD Dia A/F 89mm ± 2mm approx. approx. Weight of Pole 32 kg

387. Explained approx. (Without Base) Anchor Base (Size 300X300 & 18mm Th.) 1.00 ₹ 16,008.00 Ea. ₹

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 41/43

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

(iv) above 90 to 120 watts CAT III 14.00 ₹ 6,116.00 Ea. ₹

(A) Street Light (IP-65), Surge protection -4KV integral and, Light must have

Self 440VAC line supply with over-voltage protection.

388. Explained (i) above 36 to 48 watts 2.00 ₹ 2,815.00 Ea. ₹

Providing street light pole bracket comprising main B Class MS pipe of

cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top

having sufficient fastners for fixing the brackets and having spread of 1 mtr.

length with suitable rise as per site condition & suitable welded stiffener reducer

and nipple with check nut complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU paint. paint with following nos of

arms. Bracket shall be of same company as Street light fittings.

[A] Single Arm bracket 1 Mtr 1.00 ₹ 556.00 Ea. ₹

Self [B] Double Arm Bracket 1 Mtr 1.00 ₹ 751.00 Ea. ₹

389. Explained [C] Three Arm Bracket 1 Mtr 1.00 ₹ 946.00 Ea. ₹

Supplying and erecting B' class galvanised iron pipe 32 mm outside dia 45 cms

long duly welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected on

Self wall or corner for mounting street light luminaire with necessary hardware

390. Explained materials duly painted. Bracket shall be of same company as Street light fittings. 14.00 ₹ 340.00 Ea. ₹

Supplying & erecting approved make IP 55 grade Company fabricated Timer

Panel of following capacity for switch On-Off street lights on time scheduling

basis made from 16G CRCA sheet duly epoxy power painted inside and outside

with hinged doors and locking arrangement consisting of suitable size of 4 Pole

MCB and 4 pole contactor (cat-III)with analog time switch, auto manual switch

of same make and suitable input and output Bakelite terminals and with door

Self earthing approved by Engineer in charge.

391. Explained (B) 40 Amp 1.00 ₹ 13,218.00 Ea. ₹

Subpart D:- Earthing System

Providing and erecting required size HOT deep Galvanised iron strip for

Self earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using

392. Explained proper clamp. 48.00 ₹ 77.00 Kgs ₹

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms.

dia. galvanised iron pipe with coupling and buch buried in specially prepared

Self earth pit complete with necessary 8 SWG earth wire. - to be used for each

393. Explained Street Light 16.00 ₹ 365.00 Ea. ₹

Signature of contractor & Seal Add. City Engineer

(South West Zone)

Ahmedabad Municipal Corporation

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 42/43

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

PROPOSED PRIMARY SCHOOL BUILDING @ TP NO.: 84/A (SHARKHEJ), F.P. NO.: 92/2, SOUTH WEST ZONE, AHMEDABAD MUNICIPAL CORPORATION,

FINANCIAL BID ( To Be Submitted Online Only )

Description Amount

1 PART 01 BUILDING CIVIL PART ₹

2 PART 02 BUILDING WATER SUPPLY AND SANITARY WORKS ₹

3 PART 03 AREA DEVELOPMENT (EXTERNAL) ₹

4 PART 04 EXTERNAL WATER SUPPLY AND DRAINAGE WORKS ₹

5 PART 05- A Road Side Compound Wall

6 PART 05- B Other than Road Side Compound Wall

7 PART 06 Building Fire Fighting System ₹

8 PART 07 Recharge Borewell (2 Nos.) ₹

9 PART 08 Internal Electrification without lift. ₹

10 PART 09 External Electrification ₹

I/We am/are willing to carry out work at ______ % Above / Below (should be written in figures and words) The Estimated Cost Mentioned Above.

Estimated cost put to tender: Rs. 9,31,68,218.02 Estimated cost put to tender:Rs.

Add_____% Above : Rs ___________ Add_____% Below : Rs ___________

In words : Rupees _______________________ In words : Rupees _______________________

Add. City Engineer

Signature of contractor (ENGINEERING DEPARTMENT)

Seal South West Zone

Date Ahmedabad Municipal Corporation

E:\PIU BUILDING\T.P. 84 a School\Tender\260804_SCH_B_AMC_SWZ_School @ TP 84_Sarkhej_FP 92-2_Civil Work_'L' Shape 43/43