ADDN/ALTN TO SEWAGE LINE AT DAWSON VIHAR, DRAINAGE SYSTEM AT DAD QUARTERS, PROVN OF CHAIN LINK FENCING AT DERA AND PAINTING TO KV NO II AT NAVAL BASE KOCHI

Amount

M&L complete removal of old decorated surfaces of walls (plastered or unplastered) including cornices preparation and applying two coat of acrylic emulsion paint over a coat ofalkhali resistant primer complete all as specified and as directed .

M&L for preparation of old decorated surfaces of walls (plastered or unplastered) including cornices preparation and applying one coat of acrylic emulsion paint complete all as specified and as directed .

M&L for preperation of old painted wall surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed .

M&L for applying 3mm thick wall care putty on old and new plaster surface of wall complete all as specified and as directed .

M&L for preparation of old decorate surfaces of walls including cornices (plastered or unplastered) and applying one coat of white wash complete all as specified and as directed .

All as per item No.5 above but on ceiling .

M&L for preperation of old painted wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed .

M&L for preperation of old painted steel surfaces of any description over 10cm width or girth and applying one finishing coat of synthetic enamel paint complete all as specified and as directed .

Demolition of brick work or stone/boulder masonery, built in cement mortar, including all quoins, pillars etc but excluding ashler facing, dressed stone work and precast concrete articles complete all as specified and as directed .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed .

Demolition of breaking up sweage pipes (salt glazed stone ware or AC/RCC) 150mm dia jointed in CM and taking out trenches,(working in foul conditions) and removing debris including concrete bed and haunching from the site out side MD land complete all as specified and as directed .

Excavation in trenches not exc 1.5M wide and not exc 1.5M depth for foundation , etc for shafts , wells , cess pits , man holes , pier holes etc 10 sqm on plan and getting out in loose soil. complete as specified and as directed .

M&L for cement 1:3:6 type C2 with using 40 mm graded stone aggregate as in concrete bed to drain pipes 150 mm bore including packing under,and haunching against the sides of pipes after they are laid and tested; complete as specified and as directed .

S & F 150 mm bore PVC (SWR) PIipes a single socketed in any length with rubber ring joints laid in trenches complete as specified and as directed .

M&L PCC 1:3:6 type C2 using 40mm graded stone aggergate for surface channels and drain , including necessary form work complete as specified and as directed .

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete as specified and as directed .

M & L for PCC 1:3:6 in foundation filling and mass concrete type C2 using 40 mm graded stone aggregate including necessary form work complete as specified and as directed .

M& L for Brickwork built in cement mortar (1:4) with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius complete as specified and as directed.

M&L for 15 mm thick rendering on brick or concrete wall surface with cement morter 1:4 finished even and smooth without using extra cement complete as specified and as directed .

M&L for factory made 100 mm thick machine batched& machine mixed pre-cast RCC retangular covers over drain /manhole of various sizes of M-25 grade cement concrete for RCC work,including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe-500 grade @ maximum 100 mm c/c on both ways,neat cement punning on finished surface, properly encased on all edges with MS sheet 100mm wide ,1.6 mm thick duly painted over priming coat,reinforcement shall be welded at edges with MS sheet and providing 2 Nos 12 mm dia bars for hooks including all cost of trasportation,leads& lifts,and placing in position at site etc complete all as specified and as directed.

M&L for mild steel TMT Bars 5mm dia and over upto and including 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns. Hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed .

Returning, filling including spreading levelling watering and well ramming in layers not exc 25 cm thick(soft/loose soil) complete all as specified and as directed .

Removing excavated material exc. 50m and n. exc 100m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed .

Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out and removal of spoil n exc 50 mtr all as per directed in hard and dense soil complete all as specified and as directed .

M&L for cement concrete in foundations, filling and mass concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and as directed .

M&L for cement concrete 1:2:4 type B2 40mm graded aggregate as in foundations, filling and mass concrete , in post hole complete all as specified and as directed .

M&L for RCC 1:2:4 (20mm graded stone aggregate) as in foundations, including rafts, footings, foundations beams, plinth beams complete all as specified and as directed .

M&L for RCC 1:2:4 (20mm graded stone aggregate)as in columns, pillars, piers, posts and struts complete all as specified and as directed .

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft beams for rough finished surface flat complete all as specified and as directed .

Use and waste of formwork to sides of pillers, posts, struts, pieras, columns and stanchions for rough finished surface flat complete all as specified and as directed .

M&L for TMT bars 5mm dia and over upto and including 10mm dia in strrups, spacers. cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed .

S&F mild steel posts and struts in fencing including tops to shape as directed, drilling holes, notching for wire, etc : flat iron filets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-209 Gde E-165 complete all as specified and as directed .

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end secrewed the other, or screwed the both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long ,dia of neck 11 to 15mm complete all as specified and as directed .

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed .

Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed .

S&F MS round bars 10mm dia in strengthening of chain link fencing including making necessary hooks and inserting in fencing complete all as specified and as directed.

S&F Framed work such as in gates including pintel hinges, locking arrangments con-forming to Fe-209, Gde E-165 complete all as specified and as directed.

M&L for preparation of new plastered cement surfaces of walls, and applying two coats of cement base paint complete all as specified and as directed .

M&L for preparation of new steel surface not exc 10cm width or girth,when unconnected with other painting, and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed .

Surface excavationnot exceeding 30cm deep and averaging 15cm deep and getting out in hard and dense soil complete all as specified and as directed .

M&L for hardcore of gauge n exc 63mm, deposited, spread and levelling in layers n exc 15cm thick, watered and rammed to a true surface hardcore of gauge n exc 63cm deposited, spread and levelling in layers n. exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed .

M&L for providing cement concrete Type B1 1:2:4,using 20mm graded aggregate as in bands in between fencing posts including necessary form work complete all as specified and as directed .

M&L for precast cement concrete solid building blocks or slabs Type B1 1:2:4 (20mm thick 20 mm graded stone aggragate) 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls complete all as specified and as directed .

S&F 450mm dia reinforced concrete pipes class NP2,laid and jointed complete with collars complete all as specified and as directed .

M&L for cement concrete 1:4:8 type D2 with using 40mm graded stone aggregate as in concrete bed to drain pipe 450mm bore including forming cradles in complete all as specified and as directed .

M&L for preparation of new steel surface exc 10cm width or girth,not otherwise discribed, and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed .

M & L Plain Cement Concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate as in benching, coping etc including necessary form work completed all as specified and directed by Engr-in-Charge.

Aarjay Tech Engineering

REIGN CONSTRUCTIONS

Albert Rebello and Company

WELTRONENGINEERINGSERVICES

Oriental Constructions

SUKU CONSTRUCTIONS