Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹7.5 Laccepted-aoc | ₹7.5 L | accepted-aoc |
Tender Value
₹8.0 L
EMD Value
₹7,997
Closing Date
15 Sept 2026, 12:00 pmClosed
Executive Engineer
Beside MRO Office, Uppal Circle-9, MMC
Drilling of Borewell and Providing, Fixing of Submersible Motor, Pump Set and Other Necessary Fittings at Uppal Zonal Office, Uppal Zone, MMC.
732933
22/EEC-9/UPL/MMC/97/2026-27, Dated : 10-09-2026
OPEN
Civil Engineering Works
MEDCHAL-MALKAJGIRI, TELANGANA
6 documents required · 6 mandatory
₹284
₹7,997
17 Sept 2026
11 Sept 2026
11 Sept 2026
Drilling of borewell by down the hole Hammer (DTH) Drilling o finished Dia of 165mm in all formations to the depth specified and reaming the bore to the required dia to suit lowring in insectioon of 125 mm internal dia casing pipe with cuplings . Lowering fixing of casing pipe flushing of the borewell at an average presure of 7kg/cm2 100 PSI conducting yield test. Includsive of transportation point to point crew charges consumables shifting of Rig and all other charges wihtin the District. The Borewell should be true and verticle and work should carried out of the satisfaction of the department. And carriedout as per IS-2800 part - I &II -1979 , and ammendment if any from time to time - Drilling of 6½" dia borewell - 0 to 30 mts
Drilling of 6½" dia borewell - 30 to 60 mts
Drilling of 6½" dia borewell - 60 to 90 mts
Drilling of 6½" dia borewell - 90 to 120 mts
Drilling of 6½" dia borewell - 120 to 150 mts
Drilling of 6½" dia borewell - 150 to 180 mts
Drilling of 6½" dia borewell - 180 to 210 mts
Drilling of 6½" dia borewell - 210 to 240 mts
Drilling of 6½" dia borewell - 240 to 270 mts
Drilling of 6½" dia borewell - 270 to 300 mts
Drilling of 6½" dia borewell - 300 to 330 mts
Drilling of 6½" dia borewell - 330 to 360 mts
Supply and fixing of PVC Casing pipe of 180 mm dia of ISI mark
Supply and fixing of PVC Casing pipe of 250 mm dia of ISI mark
Manufacture, Supply,& delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc.,complete(Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 Metres.) OD 50 mm 16 Kg / Sqcm SSR 2025-2026 PG NO.678/752
Supply of 3 Core 6.0 Sqmm Flat Copper cable of ISI for Submersible Motors. Makes : Finolex / RR Kabel / Havells / KEI / LK / Pawancab ELEC 1.6.3 .D
Supply of 6 Sqmm WPTC (Weather Proof Twin Core) ISI mark Alluminium Wire. Makes : Polycab / GM / Million / VGuard / Gold Medal / Kundancab / HPL / RPG / Nandicab / Nakoda / Payal / Finecab / Gemini / Vimal / Suncab / Stanjo / Rajnigandha / Orbit / Beljin / Pawancab ELEC 1.6.2 .a
Supply & Fixing of Star Delta Starter 415V, Three phase, 50Hz. With Sheet Steel enclouser comprising of contactor with bi-metalic relay with neceSheet Steelary push buttons, etc., complete suitable from 12.5 HP to 15.0 HP. Makes: Siemens / Crompton / LK /BCH. ELEC 5.5.2 ssr 2025-2026 (pg no. 440/752)
Supply and Transportation of star rated 5.00 HP 12-16 StageThree phase ISI submersible motor pumpset suitable for 6" Bore well. Makes: Texmo / CRI / KSB / Aryan Varsha / Lubi / Falcon ELEC 5.7.1 .a
Supply and Transportation of control panel for three phase submersible motors above 5 HP up to 7.5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete. ELEC 5.11.3
S&F premium make CPVC Pipes of 54.00mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, etc.complete for finished item of work as directed by Engineer-in-charge TBSC-J.IV-06
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
22- 97 BOQ.xls
TENDER_DOCUMENT • 0.04 MB
Declaration 100 Rs. non judicial stamp paper.docx
TENDER_DOCUMENT • 0.01 MB
Tender document.docx
TENDER_DOCUMENT • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .