REPAIR AND MAINTENANCE OF EXISTING LT PANEL WITH DISTIBUTION SYSTEM LT UG CABLE AND CONNECTED ITEMS IN AND OTHER ALLIED WORKS AT SECTOR A AND SECTOR C IN THE AREA OF AGE E/M (ARMY) JAMNAGAR UNDER GE (ARMY) JAMNAGAR

Amount

Taking down LT PCC pole including exacavation, earth work and demolation of concrete etc, and complete as specified and directed by Engr -in- Charge.

M&L in replacement of Prestressed concrete pole, 9.0 mtrs long, 102 x 172 mm at top and 102 x 279 mm at bottom (class 10), all as specified and directed. Note: Excavation, earth work and PCC will be measured and paid separately.

M&L in replacement of shackle type Insulator porcelain vitreous white/ brown or green, 100 mm high and 90mm dia suitable for working pressure of 1100 Volt including Galvanized steel straps of size 31x3 mm , nut, bolt of dia 12 mm and washers of suitable size, complete all as specified and directed.

M&L in replacement of pin type Insulators Porcelain vitreous white or green including one Galvanized mild steel spindle, two GI washers and one GI nut complete for insulators of 100mm high and 65mm dia suitable for 1100 Volt electric pressure complete.

Taking down old ACSR conductor from LT line complete as directed by Engineer-in- Charge.

Material and labour for aluminium conductor, steel reinforced (ACSR) of any size, stringing properly on insulators on pole and binding with aluminium tape / binding with conductors, jumpers etc complete all as specified and directed

M&L for stringing and fixing of existing aluminium conductor steel re-inforced (ACSR) on LT poles including binding wire complete all as specified and directed at site of any type ACSR conductor and all as specifed and directed.

Dismantling cross-arms of M.S. channel or angle sections etc. complete

M/L in replacement for cross arms, bracings, supports, clamps, straps D-clamps, back plates and MS frames fabricated from structural steel sections such as MS channel, angle iron and flats etc including nuts, ,bolts, washers eye hooks, welding, bending cold or hot drilling holes for bolts in any shape or size including two coats of synthetic aluminium paint over a coat of red oxide primer after preparation of steel surface complete all as specified.

S&F in replacemnt of stay wire galvanised strand size 7/3.15mm complete all as specified and directed by Engr-in-chrage

S&F in replacement of stay assembly complete with 16mm dia stay rod accessories shown in electric plate No. 1 SSR 2009 all as specified and directed by Engr-in-Chagre Note: Loop insulator, Stay clamp, excavation and concrete measured and paid separately.

S&F in replacement of loop type insulator vitreous porcelain white/ brown green small size with overall dimension 65x90mm, clearence of hole 16mm for fixing on stay wire all as specified and directed by Engr-in-charge

M&L for PCC 1:2:4 typeB-1 using 20 mm graded broken stone aggregate as in mass concrete in coping of existing and new PCC/steel poles etc complete all as specified and directed .

M&L PCC (1:3:6) type C-2 using (40mm) graded stone aggregates as in foundation filling and mass concrete (for foundation bed concrete in poles or any other directed site)

Excavation in trenches, not exceeding 1.5metre wide and not exceeding 1.5 metre depth and getting out soft / loose soil for laying of cables etc complete all as directed by Engineer -in -charge.

Excavation in trenches, not exceeding 1.5metre wide and not exceeding 3.00 metre depth and getting out soft / loose soil for laying of cables etc complete all as directed by Engineer -in -charge.

Returning, filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing of excavated materials (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L dry river sand in trenches for cable cushioning & protection including spreading, ramming all as specified and directed.

Supply & Laying un-reinforced precast concrete cable cover, LV low voltage type -I flat size 250 mm x 150 mm x 40 mm complete

S&F Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 40 mm complete all as specified and directed.

S&F Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 50 mm complete all as specified and directed.

Taking down old unserviceable cable of any size complete all as specified and directed.

Supply & Laying only in trenches / poles / walls XLPE insulated, armoured, heavy duty electric power cable with aluminium conductor 1100 volts grade for following size with lugs complete all as specified and directed by Engineer-in-Charge (Make :- Polycab/Havells/Finolex. NOTE : (i) Excavation and earth work, GI pipe protection, sand cushioning, PCC cover shall be measured and paid under relevant items.

(a) 10 Sqmm x 4

(b) 25 Sqmm x 4

(c) 35 sqmm x 3.5

(d) 50 Sqmm x 3.5

(e) 70 Sqmm x 3.5

(f) 95 Sqmm x 3.5

Cable jointing kit for 1.1 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 sqmm to 50 sqmm.

Cable jointing kit for 1.1 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 sqmm to 150 sqmm.

Cable jointing kit for 1.1 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 185 sqmm to 240 sqmm.

M & L for painting of LT PCC pole with two coats of cement base paint from the top of the pole & upto strip marking including cleaning/scraping before painting complete all as specified and directed by Engr-in-charge.

M & L for painting LT pole cross arm, channels clamps, street light bracket & clamps etc . with one coat of red oxide primer and two coats of alluminium paint including cleaning/scraping before painting complete single LT pole mounted MS work like cross arm, bracing, clamps, channel & street light bracket will measured as one job all as specified and directed by Engr-in-charge

M & L for painting High mast steel tubular pole with one coat of red oxide primer and two coats of alluminium paint including cleaning/scraping before painting complete all as specified and directed by Engr-in-charge

M &L for painting of LT Cement poles/ Steel pole up to 1.5 meter from coping of poles, in alternative strips of 30 cm length with one coat of synthetic enamel paint in white and black including preparation of old/New surfaces and numbering of pole etc. all as specified and directed by Engr-in-charge. [including writing of MES LT/HT poles & Nos with black paint on white back ground (The letter shall be 50 mm in length)].

M & L for painting LT panels with one coat of red oxide primer and two coats of gray synthetic paint including cleaning/scraping before painting complete clamps, channel will measured as one job all as specified and directed by Engr-in-charge

Pruning of tree branches n. exc 30cm girth to clear LT/ HT Over head lines up to a distance of 3 Mtr clear span around the over head line and disposed off tree branches including repairing/ stretching/ binding of copper / aluminium conductor damage during the pruning. Note- Pruning distance only measure not full span .

Supply & Fixing in repairs of MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA all as specified and directed.

Supply & Fixing in repairs of MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA all as specified and directed.

Supply & Fixing in repairs of MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA all as specified and directed.

Supply only aluminium lugs for LT cable connection

(a) 400 sqmm

(b) 300 sqmm

(c) 240 sqmm

(d) 185 sqmm

(e) 120 sqmm

(f) 95 sqmm

(g) 70 sqmm

(h) 50 sqmm

(i) 35 sqmm

(j) 25 sqmm

(k) 16 sqmm

Supply only insulation tape 25mm

Disconnecting and taking out existing ACB from housing and cleaning, rubbing and overhauling the mechanical parts and making serviceable of electrical and mechanical operation of the ACB incl Greasing Oiling , replacement of UNSV parts ( Note : All Spares parts of ACB Panel Measured and Paid Separately under relevent Item )

supply and fixing Heavy duty cylinder capacitor of 5 kVAr ,440 V ,50 Hz s all as specified and directed by engineer - in-charge .make - Havells or equivalent

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver with warranty option of 5 years from date of installation of capacity 60 watts with pre wired and necessary mounting arrangementsnd provision of 4 sq mm three core copper conductor cable multi stranded from fitting to over head line including necessary GI pipe medium grade 40/50 mm dia 1.5 mtr long bend to required shape with MS Flat iron clamp set made out of 32 x 6 mm thick for fixing to PCC Pole with bolt, nuts, washers as required and taking down old unserviceable street light Fftting form electric pole of any description complete all as directed by Engineer- in-charge. Make :- Bajaj Cat No ENXT P 72L WH PO PC SD, or its equvalent in Philips Cat Part No BRP032 LED60 CW SLR GR PSU, Wipro Cat Part No LR02-671-XXX-57-G3.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast housing and heat sink in aluminium extrusion IP 66 flood light fitting luminaire with secondary optics, high power LEDs as light source and electronic driver with warranty option of 5 years from date of installation of capacity 120 watts with pre wired zsuitable for sports lightsband necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including removal of old unserviceable one complete all as directed by Engineer-in-Charge. Make Bajaj Cat part No PRAZE 144L WH NB-A5TG SD, or its equavalent in Philips Cat Part No BVP192 LED132 CW NB FG A1 GR PSU, Wipro Cat Part No LF34-132-060-57-XX.

M&L for earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6.0 mm buried directly in ground (earth pit not less than 2.25 Mtr below normal ground level), connected to galvanized earth lead strip of size 25 mm x 4 mm by means of bolts, buts, check nuts and washers of galvanized iron or steel including 40 mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type I, 50 mm thick precast RCC (1:2:4) type BI pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including aluminium strip of size 25 mm x 3 mm for extension of earth lead (up to 2Mtr) and necessary excavation, earth work, in soil/loose soil and disposal of spoils to a distance not exc 15 mtr and necessary connection and testing complete all as shown in electrical plate No. 5 and all as directed and specified

fakhrie apostrical (BID ID -3145703)

Hirachand Sunderji and co (BID ID -3146248)

BHAVNA IMPERIAL ENTERPRISE (BID ID -3138981)