MC and EW (Con.) Special repair and upgradation to the existing meeting room, adm. section room, inspection room at HDPM ground floor, the sub-circle office along with its inspection room at Hazarduari Palace, Murshidabad, 2025-26

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

20 mm thick plaster surface with lime sand mortar mix 1;2 (1 lime: 2fine sand) prepared in tradational method with fermented ingriedents after cleaning the surface, smooth rendering, neatly finished, including curing, cleaning, scaffolding cost of materials, labours etc. complete as per the specifications after raking out joints of brick structure as and when required including rounding off chamfering for internal walls surface all complete, as per the direction.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 ltr/10sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

Wood work in beams and burgahs fitted and fixed in position complete. Replacing carefully the damaged wooden beams and burghas with new one at inspection room of HDPM & sub-circle office.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Providing, fitting & fixing required pattern printed PVC carpet / floor matting for office floor & inspection room after removing the worn out old PVC printed floor matting

Provision for covering the electrical wiring with pvc casing (rectangular section).

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.

Polishing on wood work with ready mixed wax polish of approved brand and manufacture.

Provision for lime processing/mortar preparation unit made by bamboo frame & covering ploy tarpaulin (10"x10") with 3 nos. masonry chambers (4'x3' - 2 nos., 3' x2') by brick masonry plastering chequred cement tiles platforms with water connection from 200 m distance from main source for conservation.

Provision for erection of bamboo scaffolding in two rows including making working platform with the help of wooden Planks etc. complete & dismantling the same after work execution.

Provision for supplying and installing new printed sub-circle office board outside office with 9 gauge (4 mm thick) MS sheet (1500mm X 900mm) and MS Angle (40x40x6) stand of 2100 mm high above ground with proper pedestal and MS angle stand 300 mm below ground level with 150mm x 150mm x 150mm PCC with all necessary fittings complete, including applying a priming coat of approved steel primer as per the direction of site-in-charge.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.

Supplying, installing, fitting & fixing AC and LED TV Set to HDPM inspection room sub-circle office inspection room & old ticket counter including all complete as per the direction of site-in-charge.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. 17.32.3 Oval shape 450x350 mm (outer dimensions)

Replacing the existing damaged switch boards, switches, regulators, indicators & fuse and providing, installing, fitting & fixing including all complete new electric items at sub-circle office, HDPM & sub-circle office inspection room as per the direction of site-in-charge.

Providing, installing, fitting & fixing the required necessary items at sub-circle office & inspection room including all complete as per the direction of site-in-charge.

Providing, fitting, fixing curtains with holder at sub-circle office and it's inspection room including all complete as per the direction of site-in-charge.

Providing Almeera & iron reck at sub-circle office for storage of necessary daily maintenance items, office files, storing old office files etc.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass pane.

Providing necessary crockery items at sub-circle office inspection room

Supplying chair of standard quality in the HDPM inspection room & sub-circle inspection room

Providing 6 mm thick High performance glass for table cover in the HDPM inspection room

Provision for repair of the existing toilets inside HDPM and replacing of the damaged toiletry items and fitting, fixing of required accessories including all complete as per direction of Engineer-in-charge.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Please Enable Macros to View BoQ information