WBPWD/EE-I/CKHED/eNIT-48/26-27

Supply, installation, testing and commissioning of 20 (twenty) Passenger-cum-Bed (Simplex System operation), Automatic, Machine Room Less Elevator/Lift with VF Regenerative (Closed Loop) Drive control panel and ARD (Maintenance free Battery) as per manufacturer design & as per detailed specification below conforming to IS 14665 and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as required and as directed by EIC. (1) Capacity:- 1360 kg (20-passengers) (2) Speed:- 1.0 MPS (3) Travel:- 14.35 mtrs. (approx). (4) Stops & Openings:- 4 stops 4 openings (all on same side), Floor Served: (G+3), Floor Designation - 0, 1. 2, 3 (5) Power supply:- 415 V ± 5%, 3 Phase 50 Hz ±3% (6) Control:- Microprocessor based with VF Regenerative (Closed Loop) Drive, with full collective simplex control. (7) Operation:- Simplex full collective (with Auto / attendant mode). (8) Machine:- Energy efficient Permanent Magnet AC Synchronous Motor-Eco-Disc Gearless Drive unit suitable for 20-passenger-cum-bed lift without gear and Machine Room (9) Available shaft dimension :- 2350mm (W) x 2950 mm (D) 10) Available Pit Depth:- 1800 mm (11) Over Head:- 4700 mm approx (12) Car Inside :- 2200 mm (H) x 1300 mm (W) x 2400 mm (D) or or 2200 mm height and area as per Ammend No.1 to IS 14665 (Part 2/Sec 1) : 2000 suitable for 20-passanger (13) Car Entrance:- Clear Opening 1200 mm (W) x 2100 mm (H) protected with SS (AISI441) centre opening automatic door provided without vision panel with VF Regenerative (Closed Loop) Drive controlled door drive system. Doors should be minimum 2 hr fire rated and equipped with Nudging Feature (14) Door operation - Automatic with ACWVF Door Operator & Multi Ray Electronic Door Detector System

(15) Car enclosure & False ceiling:- Stainless Steel hairline finish.(AISI441) with LED lighting and Fan (16) Car flooring:- Decorative granite Mat finish flooring of approved colour (17) Landing doors:- SS (AISI441) hairline finish centre opening automatic door provided without vision panel with VF Regenerative (Closed Loop) Drive controlled door drive system & synchronizing operation with car door. (18) Door detector systems:- Full length photocell assembly light curtain sensor. (19) Overload protection:- On overloading the lift car will not start with door remaining open and provide audio & display indication. (20) Emergency light & alarm:- Rechargeable battery operated alarm bell and emergency light.

(21) Leveling accuracy:- ± 5 mm.(Micro levelling arrangement) (22) Automatic rescue device:- Battery operated ARD for automatic evacuation to the nearest floor in case of power failure / single phasing. (23) Main rope - Belt Type (Flat Coated steel belt with V groove / Sreel rope) (24) Operation Push Buttom for lift maintenance & service should be on top of the car (26) Car fan:- Lift car provided with fan with provision of getting automatic switched off in case of having no call. (27) Fire Man’s switch:- To be provided at ground floor landing/lobby. (28) Home landing: Car will automatically come to the preset landing when there is no call.

(29) Indicator:- Digital car position indicator, car travels direction indicator in car & at all landing with call registration indicator (30) COP & LOP:- 1 no. COP (with start / Floor button, Emergency STOP/Alarm Button, Door Open/Close Button) and 4 nos. LOP suitable for (G+3) floors with luminious push up/ down, Brail button, call registration indicator, digital position indication having Backlit LCD/ 7 segment LED display indicator, SS face plate etc. (31) Annunciator:- Voice announcement system (Voice Synthesizer with Car Chime) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. (32) Intercommunication System:- Battery operated 2-way intercom system in Lift Car, Machine Room & Control Room to be provided.

(33) Hand Rail - Stainless Steel Mirror Finish Handrails on rear car panels (34) Ventilation - Pressure fan with anodised aluminium grill. (35) Necessary additional features for disable persons like braille encoded buttons on car and landing etc should be provided. (36) Additional Safety Features - Emergency Stop Switch, Over Speed Protection, Anti-nuisance Car Call Protection, Interlocking Switch, Single Phase & Reverse Phase Protection, Phase faliure Protection, Terminal Limit Switch, Independent Service for Simplex, Delocking arrangement from landing, Door Time Protection, Belt Inspection Drive etc

(Make- Otis/ Kone/ Schindler)

Cost of all related massonary & fabrication work related to fixing the Fire Alarm switch, all Button switch and also making provision to entry of rope, electric wire etc. for installation of Lift & allied accessories, patch modification, temporary or related makeshift scaffolding arragements for lift installation including all required minor civil works (wall/ floor cutting, pocket cutting on wall, making holes through brics wall or concrete, fixing lifting/anchor hooks, chiseling lift shaft, pastering etc.) along with proper mending good the damages to the original finish as necessary and directed by EIC.

Add works contract charge in respect of GST @18%

Add LWC @1%