MAINT AND MISC CIVIL REPAIR WORK TO CERTAIN MD AND OTM ACCN AT HALLOMAJRA AND N AREA UNDER GE CHANDIGARH

Amount

Taking down chowkhats with shutters (without taking off shutter from frame) not exc 1.50 sqm each with mongry and making good the distrubed surfaces in CM 1:3 complete all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutter from frame)exc 1.5 Sqm but exc 4 sqm each with mongry nd making good the distrubed surfaces in CM 1:3 complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and removal complete all as specified and as directed.

Taking down shutters of any description n exc 1 sqm each and removal complete all as specified and as directed.

M& L for Pressed steel frames of profile size 105mm x 60mm fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including cement concrete PCC 1:2:4( Type B-0) using 12.5 mm graded aggregate as in fillets including one shop coat of red oxide primer complete all as specified and as directed.

M& L for Pressed steel frames of profile size 125mm x 60mm fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including cement concrete PCC 1:2:4( Type B-0) using 12.5 mm graded aggregate as in fillets including one shop coat of red oxide primer complete all as specified and as directed.

Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick glazed and Skelton shutter of IInd class hard wood ( except mango ) open rebated and prepared to receive glass, gauge etc (with out shash bars) divided into square plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part-I (2009) section 8-24(a) and fitted to chowkhat complete all as specified.

S&F factory made 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type with one faces are covered with decorative face veneer with lipping/frame to match, including two coat of synthetic enmel paint over a shop coat of pink primer complete all as specified & directed by Engr-in-Charge.

S&F PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F for factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F as in repair framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed.

S&F steel ventilator (Box type) with top hung shutter including hinges, steel peg towerbolt complete all as specifed and directed.

S&F 150mm long extruded aluminium alloy handle fabricated type anodized complete all as specified and as directed.

S&F 125mm long extruded aluminium alloy handle fabricated type anodized complete all as specified and as directed.

S&F 200 mm long aluminium anodised extruded section tower bolts with plate, staple & bolt and fixed to shutter complete all as specified and as directed.

S&F 150 mm long aluminium anodised extruded section tower bolts with plate, staple & bolt and fixed to shutter complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and as directed.

S&F M.S.helical spring 300mm longe including roller & roller plate complete all as specified and directed.

S&F in Hasp and staple 125 mm alluminum anodised complete all as specified and directed.

S&F 18/19 mm th Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinets,cupboards and other accesories etc as in repairs complete all as specified and as directed.

M&L for preparation of new wooden surface, of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint ( Ist quality) over a coat of pink primer complete all as specified and as directed.

M&L for Preparation of new steel surface, of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint ( Ist quality) over a coat of shop coat primer complete all as specified and as directed.

S&F 18/19 mm MDF board exterior grade, prelaminated one side with 1mm thick decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinets,cupboards etc complete all as specified and as directed.

S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm fixed to door complete all as specified and as directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

M&L for Aluminum body peg set of 06 pegs as in repair complete all as specified and as directed

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples fixe as in repair complete all as specified and as directed.

S&F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples fix in repair complete all as specified and directed.

Demolition of brickwork brickwork or stone/boulders masonary, built in Cement mortar or cement lime mortar including all quoins,arches,pillers etc but excluding ashlar facing etc complete all as specified.

M&L for brickwork with subclass ‘B’ fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L brickwork with subclass ‘B’ fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4. complete all as specified.

Taking down cement plaster on brick or concrete or stone wall surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for 10mm thick internal wall surface cement plaster with cement sand mortar (1:6) on fair faces of brick or concrete surfaces finished even & fair complete all as specified and as directed.

M&L for rendering 10mm thick cement plaster on brick work or concrete surfaces including roof projections and chajjas as in ceiling surface in cement mortar (1:3) on ceiling finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 15mm thick cement plaster on external wall surface on brick work or concrete on wall surfaces including WPC on roof projections and chajjas of buliding at upto any height in cement mortar (1:4) on wall/ceiling finished even and fair complete all as specified and directed.

M&L for preparation of new plaster surface on wall and applying two coat of cement base paint complete all as specified and as directed.

M&L for preparation of new plaster surface of ceiling and applying two coat of white wash complete all as specified and as directed.

M&L for preparation of new plaster surface on wall and applying two coat of oil bound distemper over a coat of chalk whiting on newly plastered surfaces complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base/Path complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed

Demolition of reinforced cement concrete in any description and in any position etc complete all as specified and as directed.

Material & labour for 25mm thick PCC (1:2:4) type BO (using 12.5 mm graded stone aggregate), as in leveling concrete in floor finished even & rough finish complete all as specified & directed.

M&L for RCC (1:2:4) (using 20mm graded stone aggregate) as in slab, shelves etc with & including use and waste of form work complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and directed.

M& L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hopping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS 1786-1985,( Fe- 500) complete all as specified and as directed

M& L Mild steel TMT bars 6-8mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hopping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS 1786-1985,( Fe- 500) complete all as specified and as directed

M&L for applying two coats of interior grade acrylic emulsion over a coat of primer on old wall surface including preparation complete all as specified and as directed.

M&L for complete removal of existing surface and applying two coat of oil bound distemper over a coat of primer on wall surfaces including 1mm thick wall care putty including preparation complete all as specified and as directed.

M&L for preparation of old decorated plastered of walls surfaces by rubbing down,washing,& stopping of distempered surfaces and applying one coat of oil bound distemper (Ist quality) complete all as specified and as directed.

M&L for Raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc. complete all as specified and as directed.

S&F in repairs drapery rods SS (fancy type) 20/25mm in dia with end SS brackets & funnels fixed with rawl plug and screws, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new onescomplete all as specified and directed by Engr-In-Charge.

S&F 4 mm thick , sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 sqm in each pane including hacking out glass old broken (any thickness, quailty or description) from wooden/steel frames, stone brick, concrete surrounding, glazed with oil putty or fixed with beads etc as in repair. complete all as speciifed and directed.

S&F 4mm thick Figured glass pin head type, glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm fixed to wdn frame in each pane, complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid Ceramic tiles 7 to 8 mm thick coloured area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with surfaces of tiles over 15mm thick bedding of layer of cement sand mortar (1:4) complete all as specified and as directed.

M&L for non skid Ceramic tiles 7 to 8 mm thick coloured area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with surfaces of tiles over 15mm thick bedding of layer of cement sand mortar (1:4) complete all as specified and as directed.

M&L for coloured vitrified tiles 8 mm to 9 mm thick (square rectangular) area of each tile exceeding 0.18sqm but not exc 0.36 Sqm laid as in floors, set and jointed with cement slurry over & including 15mm thick bedding of layer of cement sand mortar (1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.

M&L for Glazed ceramic coloured /printed tiles of size 450mmx 300mmx7mm thick as in skirting/dado setting & jointed with neat cement slurry over & including 10mm thick rendering of cement sand mortar (1:4) and pointed with coloured cement to match with surface of tiles complete all as specified and as directed.

M&L for Glazed ceramic coloured /printed tiles of size 300mmx 300mmx7mm thick as in skirting/dado setting & jointed with neat cement slurry over & including 10mm thick rendering of cement sand mortar (1:4) and pointed with coloured cement to match with surface of tiles complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors , aprons etc. laid, bedded and pointed in any mortar.

M&L for 18-20 mm thick granite machine cut stone slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including rounded and chamfered edges etc complete all as specified and as directed.

M&L for 18-20mm thick Machine cut kota stone slab flooring size 55cmX55cm over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, grinding rubbing, graniting polishing including 15 mm thick screed bed in CM 1:6 complete all as specified.

M&L for 18-20mm thick Machine cut kota stone slab as in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4. cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade including cutting, grinding rubbing, graniting polishing complete all as specified.

Taking down to 15mm bore steel tubing and connections removal from site complete all as specfied and as directed.

S&F 15mm bore steel water tubing medium grade, galvanized with all fittings and fixture fixed & concealed in wall/ceiling or laid in floors including MS clamp or hooks complete all as specified and as directed.

Refixing only GI water tubing of 15 mm bore with all new fittings and fixed complete to walls and ceiling or laid in floors including MS clamp or hooks, complete all as specified and as directed

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F for tubes 20 mm, `medium grade' galvanised, with all fitting and fixed complete concealed in walls and ceilings or laid in floors including MS clamp or hooks, complete all as specified and as directed

Fixing only tubes 20mm,`medium grade' galvanised, with all fitting and fixed any grade, to walls and ceilings or laying in floors including MS clamp or hooks,complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on Brick wall complete all as specified

Dismantling of walls and ceiling boards/wall paneling or insulation board any thickness, including cover fillets complete all as specified and directed

S&F PVC hallow wall panelling of 5mm thick panels including all necessary screws and frame work etc completed all as specified by Engr-in - Charge.

M&L for providing and fixing Gypsum board panel laminated with texture vinyl coated paper tiles of size 595mmx595mmx10mm thick as in ceiling having snap grid 600mmx600mm including GI wall angle of size 24mmx24mmx0.43mm thick along with perimeter of ceiling, fixed to walls/ partition with the help of nylon sleeves at 450mm centre to centre, suspending intermediate Tee section of size 24mmx38mmx0.35mm thick and cross Tee-section 24mmx25mmx0.3mm thick suspended from soffit of ceiling at up to 900 mm centre to centre or adjustable as required at site.4mmdia GI wire hangers fixed/tightened with ceiling with the help of nylon sleeve/rawl plugs complete all fittings complete all as specified and directed

S&F as in repair sink with drainage board made of stainless steel of wall thickness 1mm thick for kitchen or laboratory with plug, washers and wastes, including bedding in cement sand mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe inclunding waste pipe of suitable dia complete all as specified and as directed.

Supply & fix in repairs stainless steel kitchen plate rack made out of 1mm thick stainless steel of size 600 x 750 x 200mm with shelves and plate partition of pattern as approved by engineer-in-charge, fixed to wall by means of four nos rawal plugs complete all as specified and as directed.

S&F vitreous china wash down water closet (pedestal pattern) white with ‘ and including CI P’ or ‘S’ trap, plastic seat cover white and connection to out going pipe & to flushing pipe, anti-syphonage pipe etc as in repair complete all as specified and as directed.

S&F vitreous china squatting pan Orissa pattern 580x440mm size mm white with integral foot rest (excluding flushing cistern and flush pipe) complete incl provision of lime concrete bedding, connection to trap and to flushing pipe, anti-syphoage pipe etc fixed as in repair including PVC and MS P or S trap complete all as specified and as directed.

S&F for vitreous china white wash basin with flat back of size 550mmx400mm coloured including MS brackets, cutting for and pinning in ends of brackets, including bottle trap/ PVC waste pipe as in repairs complete all as specified and as directed.

S &F for vitreous china white wash basin with pedestal flat back of size 550mmx400mm coloured including MS brackets, cutting for and pinning in ends of brackets, including bottle trap/ PVC waste pipe as in repairs complete all as specified and as directed.

S&F single piece WC of size 365x655x765 with flushing cistern and connection pipe, P or S trap (closed pattern incl all necessary accessories like rag bolts, kitt /gel gasket etc, (including flushing cistern, pvc seat cover , jet and flush pipe complete all as specifed and directed.

S&F in repair Urinal partion of frosted glass of 8 mm thick in any shape fixed with chromium finish clamps complete as specified and directed

S&F centre hole basin mixer with spout, fancy type, chromium plated long shank with screwed, screwed for 15mm bore iron pipe or union as in repair complete all as specified and as directed.

S&F in repairs CP brass, wall mixer non telephonic, fancy type,15 mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F for one piece PVC hydrolic plastic water closet seat cover (white coloured) closed pattern with flat bottom, cover and mild steel chromium plated or aluminium hinges device for pedestal pan fixed as in repair complete all as specified and as directed.

S&F spray jet chromium plated including suitable lengthof PVC connection pipe , fixed in repair complete all as specified and as directed.

S&F chromium plated health fucet 2 in 1 with hook, including suitable length of PVC connection pipe , fixed in repair complete all as specified and as directed.

S&F in repair door seal 120cm long complete all as specified and directed.

S&F 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15 mm bore iron pipe as in repair complete all as specified and as directed.

S&F for 15mm bore bib taps, cast copper alloy with CP long body, fancy type, screwed down, screwed for iron pipes or for brass ferrule and fixed in repair complete all as specified and as directed.

S&F for Angle valve/stop valve chromium plated, with crutch or butter fly handle screwed down, and fixed with 15mm bore iron pipe as in repair complete all as specified and as directed.

S&F for stop valve (concealed type) cast copper alloy fancy type chromium plated with long shank and cup screwed down, and fixed with 15mm bore iron pipe as in repair complete all as specified and as directed.

S&F Brass chromium plated shower rose 150mm square in shape with 450 mm long arm fixed in repair complete all as specified and as directed.

S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed.

S&F glass shelf assembly 5.5mm thick, 12 cm wide and 600 mm long fixed with & including chromium plated brass screws and ooden/plastic cleats (Minimum weight 300gms) fixed in repair complete all as specified and as directed.

S&Fin repairs PVC waste pipe 32 mm bore complete all as specified.

S&F corner PVC shelf assembly (set of three of size 250x250mm,200x200mm &150x150mm) fixed in repair complete all as specified and as directed.

S&F for Soap dish, vitreous China white, approximate size 160x 160x90mm fixed in repair complete all as specified and as directed.

S&F looking mirror 5 mm thick with teak wood framing of 1" all round in any size 900mm X 900mm as specified and directed.

S&F for PVC connections with PTMT nuts of length 600 mm long fixed to 15 mm bore iron pipe or union as in repair complete all as specified and as directed.

Disconnecting existing tanks exc 250 ltr and n exc 500 ltrs in capacity for cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and reconnecting and re-fixing in position complete all as specified and as directed.

S&F tank GI Nipple suitable for HDPE water tank 20mm bore complete all as specified.

S&F in repair 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracketsPVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed in repair complete all as specified.

Supply & fix in repairs soap dish 150 mm x 75 mm size steel chromium plated complete all as specified

Supply & fix in repairs toilet paper holder vitreous china coloured, box type fixed to walls with chromium plated brass screws complete all as specified.

Dismantling of cast iron pipe / reinforced concrete/PVC drain pipes/PVC (SWR) pipe etc, 100/75/50mm, jointed in cement mortar and taking out of trenches and wall, if required complete all as specified and directed.

S&F in repairs steel grating 100mm dia complete all as specified and directed.

S&F for 110mm dia PVC rain water pipe, ISI Marked fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.

S&F for 110mm dia PVC rain water pipe , ISI Marked laid in trenches or in floors/wall complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches /fixed to wall/floor or in floors complete all as specified and directed.

S&F for floor frap 75 mm PVC as in repair, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes PVC (SWR) ISI Mark bends any radius complete all as specified and directed

S&F 75 mm PVC (SWR)pipes PVC (SWR) ISI Mark bends any radius complete all as specified and directed

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110 mm bore PVC (SWR) 'P’ trap complete all as specified and directed.

S&F 150 mm Floor Door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring, fixed complete all as specified and directed.

Dismantling water tanks of capacity exc. 500 but n. exc. 1000 litres complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) two layer ISI marked and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

M&L ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. ( minimum weight of dia 20 mm - 210 gms ) fixed to 20 mm bore complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20 mm bore dia complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 15 mm bore dia complete all as specified and directed.

M&L for 75 mm thick cement concrete type C2 1:3:6 (40mm graded aggregate) as in floor finishes/ plinth protection finished even and smooth w/o using extra cement.

S&F Steel tubular section of any size and shape including special shaped washer fixing in any position etc.complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.

M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and as directed.

S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified fixed with self tapping screws incl dismantling plain steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed

M&L pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

M&L for Toughned glass 12mm thick as in hinged doors, partitions automatic doors and similar work including ss hinge, ss handle 2 Nos floor door spring fixing all ccessories, cutting to shape, drilling holes required and ruber, cleting, silicone,glazing with oil putty et complete all as specified and directed.

S&F 5 mm thick sheet glass pane tinted/plain/Figured glass type, with 5 micron thick black film ordinary quality and ruber, cleting, silicone,glazing with oil putty etc in each pane complete all as specified and directed.

S&F aluminium powder coated (min thickness of powder coating 50 micron) frame for door , windows, ventilators weight not les than 3 kg/Rm with one or more rebates including joining cleat/aluminium beading for fixing etc complete all as specified.

S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium door shutters, weight not less thn 2.5 Kg/Rm aluminium section including necessary joining cleats/aluminium beading, glazing clips clips, ruber neoprene packing, handles 2 Nos, tower bolt 2 No in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars,including (double shutter) glazing bars and without glazing bars aluminium sections weighing not less 2.00 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), tower bolt 2 Nos complete all as specified.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts in repair complete all as specified and as directed.

M&L Asbestos cement one piece plain angular ridge 6mm thick Fixed with L-type or J-type or cranked hook bolts in repair complete all as specified and as directed.

S&F in repair 15mm dia Kitec fitting outer of PVC & inner of brass like tee,elbow, coupler etc concealed in wall/ceiling or laid in floors complete all as specified and as directed.

His Construction Company

MANDEEP ENTERPRISES

MOHAMMAD RASHID