Kerala

AOC

Works

Miscellaneous Works

Retender-AMRUT-Rejuvenation of A A Kochunni Master Park Purchase of Gym Equipments in Div 8

Local Self Government Department

Fortkochi | Ernakulam, Kerala

Amount: ₹2.5 LCloses: 17 Sept 2025Closed

Timeline

Published12 Sept 2025
Closed17 Sept 2025
Awarded28 Oct 2025

Bids

Item Rate

1 Bid28 Oct 2025

#	Company	Amount	Rank	Status
1	Taiju Kuriachan L1₹2.8 LAccepted-AOC CHIRAPPATTU HOUSE THALACODE MULANTHURUTHY PIN 682314 \| MULANTHURUTHY \| ERNAKULAM \| KERALA \| 682314	₹2.8 L	L1	Accepted-AOC lowest

BoQ Comparative

Line Items (8)

Sl No	Description	Qty	Unit	Taiju Kuriachan L1
1.01	Air walker -Supply, Delivery, Installation and Commissioning of Royal Air Walker with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.charges etc complete	1	Nos	35,000 ₹35,000 Lowest
1.02	Commissioning of Royal Elliptical with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO	1	Nos	39,000 ₹39,000 Lowest
1.03	Chest press - Supply, Delivery, Installation and Commissioning of Royal Chest Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.	1	Nos	35,000 ₹35,000 Lowest
1.04	Shoulder press -Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.	1	Nos	35,000 ₹35,000 Lowest
1.05	)Legpress cum seating twister -Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.	1	Nos	35,000 ₹35,000 Lowest
1.06	Leg lift post --Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO	1	Nos	38,000 ₹38,000 Lowest
1.07	Tai chai spinner Double -Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & IS	1	Nos	38,000 ₹38,000 Lowest
1.08	Leg press extension -Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.	1	Nos	23,000 ₹23,000 Lowest

Tender Value

₹2.5 L

EMD Value

₹6,360

Closing Date

17 Sept 2025, 3:15 pmClosed

Tender Inviting Organisation

Name

Superintending Engineer

Address

O/o Superintending Engineer, Kochi Municipal Corporation.

Work Description

Retender-AMRUT-Rejuvenation of A A Kochunni Master Park Purchase of Gym Equipments in Div 8

Tender Information

Tender ID

2025_LSGD_796742_1

Reference Number

FCE1-37899/25

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Item Rate

Period of Work

180 days

Location

Fortkochi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

Requiredcopy of Duly filled and signed bid submission form (.pdf)

Requiredcopy of Preliminary agreement duly filled and signed by the contractor (.pdf)

Requiredcopy of contractors valid licence(PRICE 3), GST registration certificate and Aadhar card (.pdf)

Requiredcopy of Affidavit duly filled and signed by the contractor. (.pdf)

Requiredcopy of Duly filled and signed requisition form for epayment and format for Integrity Pact (.pdf)

RequiredSBD duly digitally signed by contractor (.pdf)

RequiredTender Schedule (should be rounded to two decimals, others cannot be uploaded in price 3) (.xls)

Fee & Financial Details

Tender Fee Amount

₹510

EMD Fee Amount

₹6,360

Important Dates

Last Activity

28 Oct 2025

Published

12 Sept 2025

Bid Opening

17 Sept 2025

Download Starts

12 Sept 2025

Download Ends

17 Sept 2025

Submission Starts

12 Sept 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1318863.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Taiju Kuriachan

L1₹2.8 LAccepted-AOC

CHIRAPPATTU HOUSE THALACODE MULANTHURUTHY PIN 682314 | MULANTHURUTHY | ERNAKULAM | KERALA | 682314

Sl No

Description

Qty

Unit

Taiju Kuriachan

1.01

Air walker -Supply, Delivery, Installation and Commissioning of Royal Air Walker with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.charges etc complete

Nos

35,000

₹35,000

Lowest

1.02

Commissioning of Royal Elliptical with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO

Nos

39,000

₹39,000

Lowest

1.03

Chest press - Supply, Delivery, Installation and Commissioning of Royal Chest Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.

Nos

35,000

₹35,000

Lowest

1.04

Shoulder press -Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.

Nos

35,000

₹35,000

Lowest

1.05

)Legpress cum seating twister -Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.

Nos

35,000

₹35,000

Lowest

1.06

Leg lift post --Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO

Nos

38,000

₹38,000

Lowest

1.07

Tai chai spinner Double -Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & IS

Nos

38,000

₹38,000

Lowest

1.08

Leg press extension -Supply, Delivery, Installation and Commissioning of Royal Shoulder Press with main frame shall be of 80 mm NB diameter of thickness 3.00 mm and Handle pipes shall be of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Rubber grips on top end. The handle pipes are hinged over 80 NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. The handle pipes shall be further extended to the 40 mm NB diameter of thickness 2.80 mm on both sides. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system & ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.

Nos

23,000

₹23,000

Lowest