SPECIAL REPAIRS TO BLDG NO P_176-PAY OFFICE, CE SECTION, E-TICKETING AND DSC OFFICE AT INS GARUDA KOCHI

Amount

Taking down chowkats or frames with shutters exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed .

Taking down chowkats or frames with shutters but not exc 1.5 sqm each. (without taking off shutters from the frames) complete all as specified and as directed .

S&F Anodised powder coated aluminium frame for doors, windows, ventilators partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Anodised aluminium powder coated window and ventilator shutters, openable/ sliding shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F aluminium powder coated dark coloured deco grill 75 mm aperture, made out of 7.5 mm plate and finished deco grill will have 7.5 mm width and 6 mm thick with rubber beading & hooks etc complete all as specified and as directed.

M&L for 4 mm thick sheet glass ,ordinary quality and glazing in square exc 0.50 sqm in each pane etc complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification complete all as specified and as directed.

S & F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,& fixing in frame at site with wood free EPS all as specified and as directed.

S&F IInd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed.

S&F 35 mm thick factory made paneled shutter IInd class hard wood, kiln seasoned and chemically pressure treated plain framed, (Two panel) with lock rail and 10 mm bison panel etc complete all as specified and as directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 150mm Aluminium anodised barrel tower bolt and fixed complete all as specified and as directed.

S&F 150 mm size aluminium anodised alloy handle, fabricated type complete all as specified and directed

S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed .

S&F mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for 10 mm thick cement plaster with cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for 15 mm thick cement plaster with cement mortar 1:4 with integral water proofing compound (measured separately) finished even and smooth with out using extra cement complete all as specified and as directed.

Supply only water proofing compound all as specified and as directed.

M&L for preparation of newly plastered external wall surface ,scrubbing by using nylon/jute/wire brushes/scrapper blades or by using sanding machines to remove algae, moss, fungus and loosely adhered particles like dust, efflorescence etc and washing the surface with pressure jet washers and surface allowed to dry etc complete all as specified and as directed.

M&L for application of one coat of primer with sealant properties using "Seal-O-Prime" or "Weather coat exterior primer" ( of Berger make or equivalent make in other makes ) and allowed to dry overnight to receive first coat of emulsion paint complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of exterior emulsion antifungal paint on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of emulsion paint complete all as specified and as directed.

M&L for application of second coat of exterior emulsion antifungal paint on wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface complete all as specified and as directed. Note for Item No.20 to 23 :- Application through company authorised applicator or under company supervision using modern tools and techniques shall be ensured. contractor shall submit performances guarantee for a period of five years after completion as per prescribed format .

M&L for rendering 5mm thick CM 1:3 on fair faces of brick work or concrete surfaces in ceiling all as specified and as directed.

M&L for applying three coat of white washing on newly plastered surfaces in ceiling complete all as specified and as directed.

M&L for complete removal of existing treatment from walls and applying two coats of oil bound distemper over a coat of alkali resistant primer etc complete all as specified and as directed.

M&L for preparing newly plastered surfaces and applying two coats of oil bound distemper over alkali resistant primer complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar 1:3 for roof treatment all as specified and as directed.

M&L for water proofing treatment over RCC slab by applying oil bound bitumen primer @ 0.20 kg/sqm and providing and laying 4mm thick APP modified water proofing membrane of make BASF/M/S Fosroc/IWL/STP Ltd weighing not less than 4.00 kg/Sqm reinforced with non woven polyester matt weighing not less than 160 gm/ Sqm having soften point not less than 140C longitudinal tensile strength not less than 650 N/Sqm tearing strength of 180 N/Sqm torch application, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.20 Kg/Sqm finished with solar reflective/ bituminous aluminium paint @ 0.10 Kg/Sqm including taking out existing roof treatment along with screed, tar felt etc and removal of dismantled materials complete all as directed and as specified.

M & L for dismantling of wall and ceiling boards (fiber, pulp insulation etc.) or insulation boards / slabs / blankets, any thickness and provision of 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling including anodised Aluminium snap grid of size 605x605 mm and GI hangers 6mm dia upto 1200 mm length all as specified and as directed.

M & L for preparation of new ceiling board surfaces and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed.

S&F for 10 mm thick PVC Insulation Panels with EPS stuck to 1mm plain PVC sheet suitably placed in wall paneling fixed on grid made of Aluminium / G.I./M.S. as per specification including dismantling existing paneling all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification all as specified and as directed.

M & L for preparation of new wooden surfaces of any description, exc. 10 cm width of girth and applying one coat pink primer over two coats of synthetic enamel paint complete all as specified and directed.

M/L for dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish of premises complete all as specified and directed.

M&L Non - skid Ceramic tiles light shade 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough suitable for laying floor tiles complete all as specified and directed.

M&L vitrified tiles with borders , light shade 7 to 8 mm thick in skirting/ dado of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 for fair faces of brickwork or concrete surface for fixing wall tiles. Complete all as specified and as directed.

M/L for coloured anti skid ceramic tiles of size 300 x300 mm (square/rectangular) in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough suitable for laying floor tiles complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 450X 350 mm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles complete including rendering 10 mm thick in CM 1:4 for fair faces of brickwork or concrete surface for fixing wall tiles. Complete all as specified and as directed.

M&L for 25 mm thick coloured Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including Screed bed or bedding layer or mortar in CM (1: 6) 20mm thick for laying in floor finishes all as specified and directed .

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC valveless, syphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, PVC connections 15mm size with PTMT nuts of length 600mm and flush pipe and all other accessories, complete all as specified and as directed .

S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm including 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or with out lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms), chain and plug and porcelain stopper , brackets including cutting for and pinning in ends of brackets or erecting stand, PVC connections 15mm size with PTMT nuts of length 600mm and waste pipe , complete all as specified and as directed .

S&F in repair Vitreous China urinals, bowl type (back or corner wall type)size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing 5 litres pic flushing cistern, including brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and as directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material not exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L Reinforced concrete pipes, class NP2, 150 mm bore laid in trenches and jointed complete with collars complete all as specified and as directed.

M&L for Plain Concrete type D2 1:4:8 in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L Providing precast cement concrete in cover slabs (for man holes etc) Type B1 1:2:4 using 20mm graded aggregate set in cm 1:6 (Reinforcement shall be measured and paid separately) all as specified and as directed.

M&L for Mild steel bars 6 to 8mm TMT dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4, Type B1 1:2:4 (20mm graded aggregate) complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:4 complete all as specified and as directed

S&F Hume pipe septic tank for 50 users capacity including necessary earth work in soft/loose soil and removal of surplus excavated soil to a distance not exceeding 250 m, PCC 1:4:8 type D1 using 40mm graded stone aggregate foundation ,including necessary accessories such as AC vent pipe ,cowl etc complete all as shown in Drg No.TD/A/157 sheet 1/1 and as directed by Engr-in-Charge

M&L for soakage pit for 50 users, including earth work excavation in any type of soil, pit covered with precast RCC slab with PCC 1:2:4 type B1 using 20mm graded aggregate reinforced with 8 mm MT bars @150mm C/C , filled with brick bats of size 2.25 M dia x 1.80M depth all as shown on drg No.TD/A/61 sht No.1/1. and as directed by Engr-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and as directed.

M&L point wiring using proper colour coding complete with 1100 volts with 1.5 Sqmm PVC insulated unsheathed FRLSH grade conforming to IS 694-2010 multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic medium grade of suitable size with all conduit accessories on wall except beam, column and RCC roof and chases cutting incl 2 mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylam top cover incl 1.5 Sqmm PVC insulated copper conductor earth continuity wire for one light/fan point controlled by one switch etc. all as specified and as directed.

All as per item No 57 above, but for one 5 pin 5 amps socket outlet an independent board.

All as per item No 57 above, but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board.

S&F switch piano flush type 5A one way all as specified and as directed.

S&F S/S combination 5 pin 5 Amps flush type all as specified and as directed.

S&F S/S combination 6 pin 15 Amps flush type multi purpose all as specified and as directed.

S&F ceiling rose surface Bakelite 65 x 50mm 3 terminals all as specified and as directed.

S & F in repair fan regulator electronic step type 100 W, 250 Volts complete all as specified and as directed.

S&F Tube light fitting 1 x20 w ,with T 8 LED tube with aluminium Extrusion heat sink for optimum performance with high luminous efficiency and batten pre wired suitable for use with LED tube with concealed accessories complete. including taking down old one complete all as specified and directed. Make: Philips Cat part No : TMC501 P 1XT- LED 22 W P3241+ESSENTIAL LED TUBE 1200MM 20W 865 T8 INDI-2100lm / Crompton /WIPRO

S&F 07W LED mirror light fitting with tube and provided with high output diffuser including all electrical connection all as specified and directed . Make :-Cat part no LCL-14-CDL of Crompton/ Philips/Wipro

Supply and fix LED security light 35/36 W IP 65 protection including all accessories and suitable GI pipe for fixing on wall including all connection all as specified and directed. Make: Cat Part No:LSTS-36-CDL-M of Crompton/Philips/Luker

S & F LED ceiling light fitting 36 watt 2'x2' size ,recessed mounted square type fitting with excellent energy saving including all electrical connection complete all as specified and directed. Make: Philips cat RC380B LED 36S-6500 L60 W60 PSU ODOC/Lukar/Crompton

S & F LED ceiling light fitting 36 watt 2'x2' size ,surface mounted square type fitting with excellent energy saving including all electrical connection complete all as specified and directed. Make: Philips cat SM366CLED 36-6500 PSU ODGR/Lukar/Crompton

S&F Sheet metal enclosure SPN DB when MCB's to be used 4 way with 200 amps bus bar double door IP -43 recessed flush with wall complete including taking down old DBs from existing position with MCB,s all as specified and as directed.

S&F Sheet metal enclosure SPN DB when MCB's to be used 8 way with 200 amps bus bar double door IP -43 recessed flush with wall complete including taking down old DBs from existing position with MCB,s all as specified and as directed.

S&F Sheet metal enclosure TPN DB when MCB's to be used 8 way with 200 amps bus bar double door IP -43 recessed flush with wall complete including taking down old DBs from existing position with MCB,s all as specified and as directed.

S&F Sheet metal enclosure TPN DB when MCB's to be used 4 way with 200 amps bus bar double door IP -43 recessed flush with wall complete including taking down old DBs from existing position with MCB,s all as specified and as directed.

S&F MCCB TPN 100 amp ,415 volts ,16 KA with suitable size of enclosure all as specified and as directed Make :- Cat part No -420015 of Legrand /Indo Asian /L&T.

S&F MCB TPN 63 amp ,415 volts ,10 KA all as specified and as directed Cat part No -408683 of Legrand /Indo Asian /L&T.

S&FMCB SPN 6 to 32 Amp ,240 Volts,10 KA all as specified and directed Cat part No -408617 of Legrand/ Indo Asian /L&T.

S&FMCB Spa 6 to 32 Amp ,240 Volts,10 KA all as specified and as directed Cat part No -408595 of Legrand/ L&T/Indo Asian

S & F in repair SPN enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable earth plug complete all as specified and as directed.

M&L for sub main wiring using proper colour coding 1100 Volts grade with 2 runs of 4 Sqmm (FRLSH) grade PVC insulated unsheathed multistranded copper conductor cable and 1 run of 4 Sqmm (FRLSH) cable as earth continuity wire drawn through and including PVC conduit medium grade not less than 25 mm dia with all conduit accessories concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface including taking down existing wiring all as specified and as directed . Note: - 2 runs of 4 Sqmm sub main wire and one run of 4 sq mm sub main wire for earthing and PVC conduit pipe with accessories shall be measured as one unit.

M&L for sub main wiring using proper colour coding 1100 Volts grade with 4 runs of 10Sqmm (FRLSH) grade PVC insulated unsheathed multistranded copper conductor cable and 2 runs of 10 Sqmm (FRLSH) cable as earth continuity wire drawn through and including PVC conduit medium grade not less than 25 mm dia with all conduit accessories concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface including taking down existing wiring all as specified and as directed . Note: - 4 runs of 10 Sqmm sub main wire and 2 runs of 10 sq mm sub main wire for earthing and PVC conduit pipe with accessories shall be measured as one unit.

M & L Taking down 1200/1400mm sweep ceiling fan, preparing the surfaces of ceiling fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No, fixing the fan in its original location, connecting up including provision of cable from ceiling rose to connector to fan complete all as specified.

Taking down unserviceable ceiling fan of 1200mm/1400mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No complete all as specified.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables heavy duty)1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core complete all as specified and directed

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick buried directly in ground(earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to galvanized iron strip 32 x 6mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No 3 ( of SSR Part-I connected to earthing test pit all as specified or indicated including provn of necessary excavation and earth work in any type of soil, PCC pit ,RCC cover and frame, 20 mm bore medium grade watering pipe , water funnel, 40 mm bore GI medium grade protection pipe , common salt, charcoal dust, returning, filling in of soil, removal of soil to a distance not exceeding 50 mtr etc including testing on completion complete all as specified.

Sand cushioning for under ground cable protection complete provided with layers 8 cm thick before laying the cable in trenches and 15 CM after laying the cable all as specified. Note :- Punned thickness of sand shall be measured and paid

Supplying and laying reinforced precast concrete cable cover, Class LV, type 1 flat, size 250 mm x 150mm x 40mm all as specified and as directed.

Supply and laying GI tubing light for cable protection grade of size 40 mm complete with all fittings all as specified and as directed.

Material and labour earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounded from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electrode connected by using GI wire 4 mm dia (max -length of 7.5 mtrs )by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as protection pipe for GI wire connected main control board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel, wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion .

Supply & fix stop valve (angle type) cast copper alloy high pressure, screwed for 15mm dia CP fancy type (Half turn),complete including taking down old valve etc complete all as specified and as directed.

Supply & fix of concealed stop cock(half turn) with sliding flange CP fancy type of size 15mm,including taking down old valve etc complete all as specified and as directed.

Supply & fix of bib cock short body chromium plated with flange and aerator CP fancy type of size 15mm including taking down old valve etc complete all as specified and as directed.

Supply & fixing of swivel shower of PTMT any colour with shower arm 15 mm size,195mm long with bend of 45 degree with flange of PTMT, including taking down old shower complete all as specified and directed.

Supply & fixing of PVC connections 15mm dia size with PTMT nuts of length 450mm and taking down old one complete with brass union on both sides to suit 15mm GI pipe complete all as specified and directed.

S&F on wall / ceiling (concealed) CPVC pipe 25 mm dia SDR 11 & plain SDR 11 fittings. Including taking down old GI pipe 25 mm dia, complete all as specified and directed.

S&F on wall / ceiling (concealed) CPVC pipe 20mm dia SDR 11 & plain SDR 11 fittings. Including taking down old GI pipe 20 mm dia, complete all as specified and directed.

S&F Rotational moulded polyethylene double layer water storage tanks (cylindrical vertical with closed top) of 1000 litre capacity, hoisted and fixed in position including making holes for inlet and outlet including taking down old tank complete all as specified and directed .

Oriental Constructions

Albert Rebello and Company

Vidya constructions

M.J.JOY AND COMPANY