SPECIAL REPAIR OF STORE SHED BLDG NO T-11 OF BSO YARD AND CERTAIN MINOR AND REVENUE WORKS UNDER AGE B/R (EAST) AT GE DEHU ROAD

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil. complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out Hard / dense soil

M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed by Engr-in-Charge..

M&L for hardcore of guge n exc .63 mm, deposited, spread and levelled in layers n exc. 15 cm thick waterd and rammed t a true surface complete all as specified and as directed by engr-in-charge.

M & L for Cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete. complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

M & L for 40 mm thick Cement Concrete M-15 Nominal Mix (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - water proofing compound will be measured and paid separately.

Supply only Integral water proofing compound (WPC)

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement secified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified

M&L for 75mm thick P.C.C 1:4:8 type D-2 in sub base of floor complete all as specified and directed by Engr-in-Charge.

M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-22 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing and polishing to receive mirror finish over 20 mm th screed bed in CM 1:6 complete all as specified and as directed.

Ditto all as above item ser No 15 but on skirting over 10 mm th backing coat in CM 1:4 complete.

M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement. complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed by Engr-in-charge.

M & L for Glazed ceramic coloured tiles of size 300 mm X 450 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. over 10mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match. complete all as specified and directed.

All as per item No 20 above but on skirtings incl 10 mm th rendering in CM (1:4) complete.

M & L for Preparation of new previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M & L for Preparation of old previously plastered or unplastered surfaces of walls and applying one coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete. complete all as specified and directed.

M&L for preparation of surfaces of old plaster surface of wall and applying one coat of cement base paint complete all as specified and directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. complete all as specified and directed.

Demolition of concrete ( un reinforced ) in ground floors and paving n.exc 15 cm thk (below or above ground level)

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed by Engr-in-Charge.

Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point. complete all as specified and directed.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections, finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in surface channels for finishing all as specified and directed.

M & L for Reinforce cement concrete Type B1 1:2:4 (20 mm graded aggregate) Beams, cantilevers, bressumm ers, lintels over 1.5m spcomplete all as specified and directed.

M & L for Reinforce cement concrete Type B1 1:2:4 (20 mm graded aggregate) in chajja spcomplete all as specified and directed.

M & L for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items in?cluding edges

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S & F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr In Charge.

All as per item No. 42 above but fix in valley gutter / ridge

Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge.

S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.. conf to Fe-410-w(gdeE-250 quality-A) complete all as specified and directed.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling all as specified

M&L 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid comlplete as specified

S & F hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specied and as directed.

S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified.

M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 100 mm .complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 100 mm bore RCC pipe.

M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 150 mm .

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 150 mm bore RCC pipe.

S&F 15 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.

S&F 20 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.

S&F 20 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.

S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge..

S&F 20mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge..

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete

S & F for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

S & F PVC valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, CP down pipe and connecting to the WC and making good to the floor with PCC including waste pipe all as specified and directed.

S&F bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge.

S & F Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight complete all as specified and directed. 15mm-90gms

S&F 15mm dia stop valves , fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed by Engr In Charge.

Supply & fixing 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed by Engr In Charge..

S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm

S&F urinal spreader of PTMT 15mm size with PTMT nuts of length 300mm complete all as specified and directed by Engr-in-Charge

S&F C P floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)..complete all as specified and directed.

M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 180x100mm for drain pipes complete all as specified and directed.

S&F in repair CP jet spray with one mtr flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge

S&F in repair health Faucets with flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge

M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.complete all as specified and directed.

S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors complete all as specified and directed.

S & F 75 mm dia bore PVC (SWR) bends any radius

S & F 110 mm dia bore PVC (SWR) bends any radius

S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal

S & F PVC (SWR) 110 mm bore vent cowl

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 100 mm bore RCC pipe. complete all as specified and directed.

S&F soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall. complete all as specified and directed.

S & F 20 mm dia., Aluminium alloy anodised curtain rails with brackets fixed.

Taking down Chowkat/frame exc 1.5 sq.m & n.exc 4 sq.m including removing to store,complete all as specified.

Taking down Chowkat/frame n.exc 1.5 sq.m each complete all as specified.

S & F II class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamferred, put together with glue pinned at joints. complete all as specified and directed by Engr In Charge.

S & F II class hard wood Plain, framed, pannelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers etc complete as specified.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm. complete all as specified and directed.

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S & F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F of 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 100 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F for 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete

S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. complete all as specified and directed.

S & F steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauge bars of FI 10x 3mm thick dovetailed or welded .All as specified.

Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick. complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Dismanteling MS works of any desc. not otherwise provided for complete all as specified.

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified.

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.P fixed with and incl MS stud of suitable size as per manufactures instructions. Complete all as specified.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and irected complete all as speified and directed.

S&F of road saftey convex mirror size 1000mm dia (Model-BS-CM-100) made of one piece of polycarbonate lens damage resistant, light weight and secure fixing in post hole (or similar holes) each n.exc 0.5cu m, getting out,returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil, filling with PCC 1:3:6 using 40 mm graded stone aggregate complete with mounting hardware all as specified and as directed by Engineer-in-charge.

M/L Chequared Cement Concrete (reflactive rubber molded) Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors reflective coloured over screed bed 15 mm thk in cm 1:6. complete all as specified and directed.

M L for Providing, cement concrete type B1, 1:2:4 (20 mm aggregate) in roof kerbs or mud stops, rounded or chamfered on edge complete all as specified.

Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point.

E/M PART

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M&L for point wiring with 1.5 sqmm single core multistranded copper conductor FRLS cable of PVC insulated and unsheathed type alongwith 1.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc for Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing

One light point controlled by one switch

One fan point controlled by one switch & regulators

One socket 5 pin 5 Amps flush type on same board

One socket 5 pin 5 Amps flush type on independent board

M&L for point wiring with 2.5 sqmm single core multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc for Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing

S&F switch piano flush type single pole one way 5 Amps

S&F switch socket combination 2 in 1, 5 Amps flush type

S&F switch socket combination 2 in 1, 15 Amps flush type

S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block

supply and fix in repair regulator electronic step type for ceiling fans suitable for AC 230 volts 50 Hz 1200 / 1400mm sweep

Supply and fix in repair LED Fitting 18 Watts LED including provision of connections cable pvc unsheathed stranded copper conductor and pvc square block of size 80mmX80mm MAKE :HPLLEDT5PC20CW OF HPL or Equivalent in Philips/Bajaj/Havells

S& F 2 feet 10 W linear aluminium LED batten with white acrylic cover complete with all accessories prewired and coneecting up with twin core twisted flexible copper conductor cable with suitable size.

S&F in repair 45/50 W LED LOW BAY luminaire complete of CAT No SZHWGMX045 of Shakti or LHBY50 of Luker Equivalent /bajaj/havells

S & F in repair submain wiring with cable insulated single core multistranded copper conductor FRLS cable 1100 volts 2x 2.5 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 1.5 sqmm copper conductor cable for earth continuity. (Note : 2 runs of 2.5 sqmm cable, one run of 1.5 sqmm cable and one run of PVC casing capping will be measured as one RM).

supply and fix in repair MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP , 5- 32 amp to fit in the MCB DB complete with connection testing and commissioning.

supply and fix in repair isolator SPN 40 Amps 240 volts

M&L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick burried burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plare No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work in any strata,PCC Chamber with cover,Charcoal and Salt as required & 15 mm Light Grade GI pipe from steel plate to DB in order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge.

Material and labour for replacement of unserviceable Security light bracket made out of GI pipe 1.2 mtr long 40mm dia medium grade bent to shape as directed including 2 nos MS clamps made out of 40mmX6mm flat iron for fixing on wall including nuts and bolts of required size all as directed incl taking down of old unserviceable bracket.

Material and labour in replacement for LED building security lights 30W LED IP66 New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 30W LED 6000K including making connection with three core aluminium conductor pvc cable from junction box/ overhead conductor to street light fitting all as specified. MAKE:- CAT PART NO LSTS-30-CDL-M of Crompton ,LR02-331-XXX-57-XX OF WIPRO/LHETBXU7PA1S030OF HAVELLS /LTRUMP0030XW of JAGUAR

M&L for insertion of fan hook including fixing of fan hook and MS 150 mm dia fan rod of necessry length as per site requirement all as specified and directed.

Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store.

Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan.

S&F in repair Smart Integrated Solar All In One with > 140Lum/W, 09 Watt power Rating, MPPT Charge Controller, Tiltable LED panel, Adjustable AIO mounting angle, Mono Crystalline Solar Panel, PIR motion Sensor, easy to install including 40 mm dia pole to install. MAKE :- CAT PART No CSADEMPS09CDL of Crompton or eq in havells,Bajaj

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element 2 KW capacity 25 litre, BEE 5 Star rated complete with all ccessories such as safety valve, thermostate,NRV, connection piece etc.

supply & Laying in repair cable XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with stranded aluminum conducter of following sizes:- Make :- Havells/ Polycab/ Gloster

16 Sqmm x 2 Core

M & L in repair for 50 mm HDPE pipe for UG cable protection through out from panel to all as specified and directed by Engineer-in-Charge.

All as above item but 40 mm dia

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-

(a) Soft / loose soil

(b) Hard / dense soil

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

M&L for laying of steel Tubes, 'light grade', galvanised, with all fitting;laid in trenches of 50 mm dia all as specified and directed.

supplying laying & fixing GI tubing medium grade with all necessary fittings such as bends,elbows,tees,shorts pieces disminishing pieces ,caps&plugs in trenches all as directed for following sizes

20 mm dia

25 mm dia

40 mm dia

Supply and fix gate valve stop screwed 20 mm dia

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor

M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge.

M&L for MS Work i:e includes material,cutting,welding,other process for shaping of material to get into required shape as per site requirment and fixing on site. Note: Earthwork will be measured and paid separately

H S TAKHI

DR J S CHADHA AND SONS

M/S K.D.MATE

KARPE AND SONS CONSTRUCTION

Shri Sant Cosntruction