Construction of Ayurvedic Health Centre Building at Minta in Tehsil Fatehpur Distt Kangra HP SH Construction of Building portion ic Water Supply and Sanitary Installation Septic Tank for 30 users alongwith Soak pit and Rain Water Harvesting System

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil within all leads, as directed by Engineer-in- charge and then returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge, within all leads, and lifts disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. within all leads, as directed by Engineer-in- charge and then returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge, within all leads, and lifts disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Suspended floors, roofs, landings, balconies,shelves and access platform, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Lintels, beams, plinth beams, girders, bressumers and cantilevers, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Stairs, (excluding landings) except spiral stair cases, as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Small lintels not exceeding 1.5 m (One point five metre) clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like, as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in edges of slab and breaks in floors and walls, as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in vertical surface such as walls any thickness, as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Providing and filling in bricks bat/stone aggregate in soakage pit as per approved drawing, design specification and direction of the Engineer-in-Charge, including carriage of material with in all leads, lifts and other incidentals . The rate inclusive of sale tax, toll tax, GST and any other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (One Cement : four coarse sand : eight graded stone aggregate 40 mm (Forty milimetres) nominal size, curing complete, as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (One cement : six coarse sand : twelve graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (One cement : six coarse sand) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (One cement : six coarse sand) , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Square rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (One cement : six coarse sand) , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (One Cement : two coarse sand : four graded stone aggregate 20 mm (twenty milimetres) nominal size, curing complete, as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (Fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (One cement : and and half coarse sand : three graded stone aggregate 20 mm (Twenty milimetres) nominal size) including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (One cement : one and half sand : three graded stone aggregate 20 mm (Twenty milimetres) nominal size), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying damp proof course 40mm (forty milimetres) thick with cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 12.5mm (Twelve point five milimetres) nominal size) and curing complete as per approved drawing, design HP:PWD. Specifications and as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 (VG-ten) of approved quality using 1.7kg (One point seven kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Brick work using with common burnt clay building bricks of 2nd (second class) designation 12.5 (twelve point five) conforming to IS: 2222 in super structure above upto any floor level in cement mortar 1:6 (One cement : six coarse sand) and curing complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Brick work using Second class common burnt clay modular bricks of class designation 7.5 (seven point five) in foundation and plint in cement mortar 1:6 (one cement : six sand) and curing complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor to all level.Cement mortar 1:4 (one cement :four coarse sand), as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Supplying, filling, spreading and leveling stone boulders of size range 5 cm to 20 cm, (five centimetres to twenty centimetres) in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying 600x600mm (six hundred into six hundred millimeter) Full Matt finished vetrified tiles of Restile/Nitco/Rak/Kajaria/Orient Bell/AGL/Simpolo/Johson/Somany of approved shade and design, as per approved shade and design of the office (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm (twenty millimeter) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm. (three point three kilogramme/square meter) including grouting the joints with white cement and matching pigments etcetera complete as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying Double charge/ Ultra charge vetrified tiles of size 600x600mm (six hundred into six hundred millimeter) and 10mm (ten millimeter) thick in grey/coloured of Nitco/Restile/Kajaria/Orient Bell/AGL/Simpolo/Johson/Somany of approved shade in flooring treads of steps and landing laid on a bed of 12mm (twelve millimeters) thick cement mortar 1:3 (one cement : three coarse sand) laid over and jointed with neat cement of slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying 300x300 mm (three hundred into three hundred millimetre) Ceramic glazed floor Tiles of Premimum quality of Nitco/ Kajaria/ Johnson /AGL / Somany/ Orient Bell (thickness to be specified by the manufacture) of Ist quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand) jointed with grey cement slurry @ 3.3 kg/sqm. (three point three kilogramme/per square metre) including pointing the joints with white cement and matching pigment etcetera complete as per approved specifications, drawing and design, as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying Kota stone minimum Size 55x55cm (Fifty five into fifty five centimetre) of uniform colour with 7.5 cm (Seven point five centimetre) wide Jaislmer Yellow marble band of (NTC /Johnson ) of approved shade as per detail slab flooring over 20 mm (Twenty milimetres) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (One cement : four coarse sand), as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Kota stone slab 25 mm (Twenty five milimetre) thick in risers of steps, skirting, dado and pillars laid on 12mm (twelve millimetre) average thick base of cement mortar 1:3 (One cement : three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing as per approved specification, drawing and design and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying marble stone flooring with 18mm (eighteen milimetre) thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20mm (twenty millimetre) average thick base of cement mortar 1:4 (One cement : four coarse sand) laid and jointed with grey cement slurry including rubbing and polishing as per approved specification, drawing and design and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

6 mm (Six milimetres) thick cement plaster in ceiling with cement mortar 1 : 3 (One cement : three fine sand ), complete in all respect, as per specification, Drawing and direction by the Engineer in charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and applying 15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement : six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:3 (one cement isto three sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Distempering (two or more coats) with dry distemper of Asian /Nerolac/Dulux approved brand and manufacture and of required shade on new work, over and including water thinnable priming coat to give an even shade as per specification, Drawing and direction by the Engineer in charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and applying white cement based putty of Birla / JK average thickness 1 mm (One milimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Distempering (two or more coats)with oil bound washable distemper of approved brand and manufacture (Nerolac/Asian or its equivalent) and of required shade on undecorated wall surfaces to give an even shade over and including priming coat of distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth priming coat with distemper primer upto all floor level including carriage of materials within all leads, lifts, and other incidentals and as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Finishing walls with water proofing paint of required shade of Asian / Dulux / Berger / Nerolac New work (Two or more coats) applied @ 3.84 kg/10 sqm. ( at the rate of three point eighty four kilogram/ tem square metre) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, (thirty five into thirty five into five millimetre) joints mitred and welded by angle iron 35x35x5 mm (thirty five into thirty five into five millimetre) or 35x 5mm (thirty five into five millimetre) flat pieces to the existing Tiron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 35 mm thick ISI marked flush door shutters of Century / Alpro / Duroply conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply (Three ply) veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws,as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of standard standard rolled steel section joints mitred and welded with 16x3.15mm (sixteen into three point fifteen millimetre) lugs 10cm (ten centimetre) long embedded in cement concrete blocks 10cmx10cmx15cm ( ten centiretre into ten centimetre into fifteen centimetre) size of 1:3:6 (one cement : three sand : six graded stone aggregate 20mm (twenty millimetre) nominal size), or with wooden plug and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings including providing and fixing glass panes with grazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government. Side Hung windows.

Providing and fixing steel glazed doors, windows and ventilators of standard standard rolled steel section joints mitred and welded with 16x3.15mm (sixteen into three point fifteen millimetre) lugs 10cm (ten centimetre) long embedded in cement concrete blocks 10cmx10cmx15cm ( ten centiretre into ten centimetre into fifteen centimetre) size of 1:3:6 (one cement : three sand : six graded stone aggregate 20mm (twenty millimetre) nominal size), or with wooden plug and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings including providing and fixing glass panes with grazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government. Fixed steel windows.

Providing and fixing steel glazed doors, windows and ventilators of standard standard rolled steel section joints mitred and welded with 16x3.15mm (sixteen into three point fifteen millimetre) lugs 10cm (ten centimetre) long embedded in cement concrete blocks 10cmx10cmx15cm ( ten centiretre into ten centimetre into fifteen centimetre) size of 1:3:6 (one cement : three sand : six graded stone aggregate 20mm (twenty millimetre) nominal size), or with wooden plug and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings including providing and fixing glass panes with grazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government. Top hung ventilator.

Providing and fixing M.S. fan clamp type I or II of 16mm (sixteen millimetre) dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (zero point fifty millimetre) (+ 0.05 %) total coated thickness with zinc coating 120 grams (one hundred twenty grams) per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns (twenty five microns) minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm ( five point five into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (zero point fifty millimetre) (+0.05 %) total coated thickness, Zinc coating 120 grams (one hundred twenty grams) per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) (five hundred - six hundred millimetre) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing valleys of 90 cm (Ninety centimetre) wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm (eight millimetre) dia G.I. limpet and bitumen washers complete 1.60 mm (one point sixty millimetre) thick with zinc coating not less than 350 gm/m² (three hundred fifty grams/square metre) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 1.66mm to 2 mm (one point sixty six millimetre to two millimetre) thick of TATA/SAIL for eaves board/Facia/Soffit/Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (Base members of steel work shall be measured and paid for separately) as per the direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Structural steel of Tata/ Sail work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete as per specification, drawing and design and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion. Bend 87.5° 110 mm bend ( eighty seven point five degree one hundred ten millimetre) as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion Shoe Plain 110mm shoe (one hundred ten millimetre) as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion Single socketed pipes 110mm diameter (one hundred ten millimetre) as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 35 mm thick (thirty five millimetre) factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : 12 mm thick (twelve millimetre) one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade -1, Type II marked as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 300 x 16 mm (Three hundred into sixteen milimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 (AC Ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete, as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 250 x 16 mm (Two hundred fifty into sixteen milimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 (AC Ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete, as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 250x10mm (Two hundred fifty into ten milimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 (AC Ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera complete, as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (AC Ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete, as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (AC Ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete, as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etcetera complete Size 65 mm (sixty five millimetre) as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etcetera complete Twin rubber stopper, as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing150mm (one hundred fifty millimeter) oxidised M.S. double acting spring hinges with necessary screws etcetera complete as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 200 mm (two hundred millimetre) bright finished brass hard drawn hooks and eyes complete as per approved drawing, design, specifications and as per the direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 30cm (thirty centimetre) long bright finished brass finger plate 65x1.6mm (sixty five into one point six millimetre) including necessary screws etcetera complete as per approved drawing, design, specifications and as per the direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 50 cm (fifty centimeter) long aluminium kicking plate of size 100x3.15 mm, (one hundred into three point fifteen millimeter) anodised (anodic coating not less than grade AC 10 AC ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per approved drawing, design, specifications and as per the direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PTMT door catcher of length 72 mm (seventy two millimeter) and dia. of 42 mm(forty millimeter) with suitable washers weighing not less than 33 gms. (thirty three grams) as per approved drawing, design, specifications and as per the direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 40x5 mm (Forty into five milimetres) flat iron hold fast 40 cm (Forty centimetres) long including fixing to frame with 10 mm (Ten milimetres) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (Thirty into ten into fifteen centimetres) 1:3:6 mix (One cement : three coarse sand : six graded stone aggregate 20mm (Twenty milimetres) nominal size), including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 18 mm (eighteen millimeter) thick, 150 mm (one hundred fifty millimeter) wide pelmet of flat pressed 3 (three) layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm (six millimeter) commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm (twenty millimeter) dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm (twenty five into three millimeter) M.S. flat 10 cm (ten centimeter) long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm (one hundred millimeter into forty millimeter into forty millimeter) on both inner side of pelmet and rawl plugs 75 mm (seventy five millimeter) long etcetera all complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 10mmx10mm (Ten milimetres into ten milimetres) square bar M.S. (Mild steel) grills of required pattern in frames of windows etcetera with 20x4mm (twenty into four milimetre) M.S. (Mild steel) flats, square or round bars etcetera including priming coat with approved steel primer all complete.Fixed to steel windows by welding as per approved drawing, desiign, specification and as per directions of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate is includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 50mm (fifty millimeter) diameter stainless steel hand rail of approved size by Gas welding etcetera to steel ladder railing, balcony railing, staircase railing and in other similar works, including cutting, hoisting of all horizontal and vertical members with fixing complete balusters of specified guage and manufacturing as per approved drawing, desiign, specification and as per directions of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate is includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufactures specifications: Painting Steel work with Deluxe Multi Surface Paint of Asian / Nerolac to give an even shade, two or more coat applied @ 0.90 ltr/ 10 sqm (Zero point nine zero litre obleque ten square metre) over an under coat of primer applied at the rate of 0.80 ltr/ 10 sqm (Zero point eight zero litre obleque ten square metre of approved brand and manufacture complete in all respect, as per specification, Drawing and direction by the Engineer in charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Applying priming coat : With ready mixed pink or Grey primer of Asian / Nerolac approved brand and manufacture on wood work (hard and soft wood, complete in all respect, as per specification, Drawing and direction by the Engineer in charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of Asian / Nerolac required shade. Two or more coat applied at the rate of 0.90 ltr/10 sqm (zero point nine zero litre obleque ten square metre) over an under coat of primer applied at the rate 0.75 ltr/10 sqm (Zero point seven five obleque ten square metre) of approved brand and manufacture, as per specification, Drawing and direction by the Engineer in charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Supplying, filling, spreading and leveling gravels of size range 5mm to 10mm (five millimetre to ten millimetre), in the recharge pit,over the existing layer of boulders, in required thickness for all leads and lifts, all complete as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Making plinth protection 50mm (fifty millimetre) thick of cement concrete 1:3:6 (One cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm (twenty millimetre) nominal size) over 75mm (seventy five millimetre) thick bed of dry brick ballast 40 mm (forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Construction of coursed rubble hammer dressed 'U' shape drain covered with removeable precast perforates slab with side wall 15x23cm (fifteen into twenty three centimetre) in cement mortar 1:6 ( One cement : six sand ) and in side plastering with cement mortar 1:3 ( One cement : three sand ) including earth work and laying 10cm (ten centimetre) thick cement concrete 1:5:10 ( One cement : five sand : ten graded stone aggregate 40mm (forty millimetre) nominal size) and 7.5cm (seven point seven) cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement slurry complete as per approved drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 2025 (25mm (Twenty five milimetres) from main line to complex (OD) outer diametre pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, (Eighty degree C) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 metre (One metre) spacing. This includes testing of joints complete as per direction of the Engineer-incharge concealed work including cutting chased and making good the wall,, including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 2025 (16mm (sixteene milimetres) for all internal toilets (OD) outer diametre pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, (Eighty degree C) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 metre (One metre) spacing. This includes testing of joints complete as per direction of the Engineer-incharge concealed work including cutting chased and making good the wall,, including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion. Bend 110 mm bend (one hundred ten millimetre) as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion. Single tee without door 110x110x110mm (one hundred ten into one hundred ten into one hundred ten millimetres) as per approved drawing, design, specifications and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with seat and lid, 10 litre (Ten litre) low level white P.V.C. flushing cistern Hindware , Cera ,Jaquar of star white / Snow white including flush pipe with manually controlled device (Handle lever), conforming to IS: 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid, as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 20090 of size 580x440 mm (Five hundred eighty into four hundred forty milimetres) with integral type foot rests with 100 mm (One hundred milimetres) sand cast Iron P or S trap, 10 litre (Ten litre) low level P.V.C. flushing cistern,of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back Matrix wash basin 630x 450 mm ( six hundred thirty into four hundred fifity milimetre) of Cera / Hindware / Jaquar with single 15 mm (Fifteen milimetre) C.P. brass pillar tap with C.I. brackets, 15 mm (Fifteen milimetre) C.P. brass pillar taps, 32 mm (Thirty two milimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required, as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 of Diamond / unik Kitchen sink with drain board 610x460 mm (six hundred ten into four hundred sixty milimetre) bowl depth 200 mm (two hundred millimeters) with C.I. brackets and stainless steel plug 40 mm (Forty milimetre), including painting of fittings and brackets, cutting and making good the walls wherever required, as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PTMT waste coupling for wash basin and sink, of approved quality and colour Waste coupling 32mm (thirty two millimetres) dia of 79mm (seventy nine millimetres) length and 62mm (sixty two millimeters) breadth weighting not less than 45gms (forty five grams) as per approved drawing, design, specifications and as per the direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangement of approved quality and colour 600mm (six hundred millimeter) long towel rail with total length of 645mm (six hundred forty five millimeters) width 78mm (seventy eight millimeters) and effective height of 88mm (eighty eight millimeters) weighting noe less than 190 gms ( one hundred ninety grams) as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing chromium plated brass soap dish of continental series of Jaquar/Contessa series of Hindware with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing continental series of Jaquar or contessa series of Hindware 15mm (fifteen millimetre) diameters C.P. brass bib tap with capstan head complete as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing continental series of Jaquar or contessa series of Hindware 15mm (fifteen millimetre) diameters C.P. brass pillar tap with capstan head complete as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing C.P. brass angle cock 15mm (fifteen millimeter) without nuts and pipe as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15 mm (Fifteen milimetres) nominal bore C.P. brass stop cock (concealed) of continental series of Jaquar/ Classic series of Hindware/ Finolex series of Cera/Vintage series of Kerovite and Hindon series of Jal of standard design and of approved make conforming to IS:8931, as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore Uplasticised PVC connection with brass union 30cm. (thirty centimetre) length,of Finolex , Relpipe (Reliance ) , Vectus, as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Supreme ,Finolex, Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( One cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one and half coarse sand (zone- III) : three graded stone aggregate 20 mm (Twenty milimetres) nominal size), foundation concrete 1:4:8 mix (One cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (Forty milimetres) nominal size), inside plastering 12 mm (Twelve milimetres) thick with cement mortar 1:3 (One cement : Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : two coarse sand : four graded stone aggregate 20 mm (Twenty milimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm (Ninety into eighty centimetres) and 45 cm (Forty five centimetres) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23 kg (Twenty three kilogram) and weight of frame 15 kg) (Fifteen kilogram) With Sewer bricks conforming to IS : 4885, as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (One cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover with frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23 kg (Twenty three kilogram) and weight of frame 15 kg), (Fifteen kilogram) R.C.C. top slab with 1:1.5:3 mix (One cement : one and half Fine sand : Three graded stone aggregate 20 mm (Twenty milimetres) nominal size), foundation concrete 1:5:10 (One cement : five fine sand : ten graded stone aggregate 40 mm (Forty milimetres) nominal size), inside plastering 12 mm (Twelve milimetres) thick with cement mortar 1:3 (One cement : three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm (Four hundred fifty five into six hundred ten milimetres) and 45 cm (Forty five centimetres) deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5, as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100mm (one hundred millimetre) inlet and 75mm (seventy five millimetre) outlet hubless centrifugally cast (spun) iron epoxy coated inside and outside as per IS: 15905 as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) diametres C.P. Grating of Continental series of Jaquar / Classic series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal for gully floor or Nahni trap, as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) nominal bore/diameters P.V.C. ISI marked of Finolex , Relpipe (Reliance ) , slotted cowl (terminal guard) as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement : four coarse sand : eight graded stone aggregate 40 mm (Forty milimetre) nominal size) all-round S.W. pipes including bed concrete as per standard design 150mm (One hundred fifty millimeter) S.W. pipe as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

ARUN KUMAR

ANKIT MAHAJAN

A.R. Traders