Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 2 2F NORTH SALAPATTI THIRUVELLARAI VIA MANACHANALLUR TK TRICHY DT | MANACHANALLUR | TRICHY | TAMIL NADU | Admitted-Finance |
| 2 | Not Admitted-Fee/PreQual/Technical 690 MELA STREET AGARAM ALAGAPURAM PO ANDIMADAM TK ARIYALUR DIST 608901 | ANDIMADAM | ARIYALUR | TAMIL NADU | 608901 | Not Admitted-Fee/PreQual/Technical Others-The given undertaking towards exemption from payment of EMD is not in favour of the tender inviting authority. |
Tender Value
₹12.8 L
EMD Value
₹12,800
Closing Date
5 Jan 2023, 2:00 pmClosed
THE SUPERINTENDING ENGINEER TEDC METRO TRICHY
Office of the Superintending Engineer, TEDC/Metro, Mannarpuram, Trichy-20.
Improvement works by providing Roof top tiles, water proofing, PVC Water tank and Road in CE / D / Trichy office building at Thennur premises .
2022_EB_274429_1
Specification.No.09/2022-23
Open Tender
Civil Works
Works
60 days
THENNUR
REFER BQR IN TENDER SPEC
2 documents required · 2 mandatory
₹0
₹12,800
Yes
10 Jan 2023
22 Dec 2022
6 Jan 2023
22 Dec 2022
5 Jan 2023
22 Dec 2022
22 Dec 2022 - 4 Jan 2023
Amount
Dismantling and clearing away ( corporation limit ) from site to the designated place as directed by the engineer at site including labour, lead and lift etc., complete.
Pressed Tiles
Floor Finish
Flooring with good quality of solar reflective ceramic Tiles with a size 305x 305 x7 mm of approved make laid with required slope properly to drain off water completely from roof top in CM 1:2, min 20 mm thick including cutting the tiles to the required size wherever necessary, laying in position and pointed with grouting material as instructed by engineer at site including all lead,lift etc.,complete.
Removal & Refixing of 30 kWp rooftop LT grid connected solar power unit panels ( 96 Nos) installed together with the complete support structure at the mainbuilding terrace of the " Office of the Chief Engineer / Distribution / Trichy Region / Trichy at Thennur for laying of new pressed tiles including labour, replacement of wornout clamps, bolts & Nuts, connectors etc., complete.
Supplying,fabricating,erecting and fixing of 10 mm thick plaster of paris plain sheet (gyprock Pop board - Saint Gobain make) for false ceiling at a height of 3 m from the existing floor level,including cost of all materials, lead, lift, fabrication, carving, providing cornice work, droping design work,erection charges, cleaning and removal of debris from the work site, Interior painting with two coats of approved interior emulsion over one coat of primer .The False Ceiling design will be provided and execution of work is to be carried out as per the drawing and without any deviation etc., complete.
Supplying & fixing of PVC water tank of 1000 litres capacity of reputed make as per the instructon of Engineer-in-charge including cost of tank, transport and fixing charges etc., complete.
PCC 1:2:4, using 20mm HBG metal foundation without form work including cost of cement, all materials, labour, lead, lift, etc. complete.
Special type of plastering with CM 1:3 - 10mm thick by using special bonding agent and repair material including chipping of concrete, cost of materials,curing, labour, lead,lift etc., complete.
Supply and fixing of 18W 4 feet LED fitting complete with TW round blocks on wall or ceiling with LED and PVC unsheathed copper leads from terminals to the fitting.
Supply and fixing of LED Flood Light 100W with Integrated Driver including cost of LED, labour etc.,complete
Supply and fixing of 1200mm (48”) sweep AC celling fan (High Speed) of reputed make complete with stepped electronic 300W regulator, with 1 meter down rod with fan clamp with side plates and cross arm of size 450 mm(18”).
Supply and fixing of 18" wall mounting fan of Crompton make complete with stepped electronic 300W regulator, with 1 meter down rod with fan clamp with side plates and cross arm of size 450 mm(18”).
Supplying, fixing and laying of UPVC pipe ( schedule40) for water supply arrangement including cost of all materials, labour, lead, lift etc complete.
40 mm dia
25 mm dia
Supplying and fixing of PVC down fall pipe of 160 mm dia, 4 kg / cm2 with necessary, leads, lift etc complete.
Supplying and fixing in position of gun metal gate valve 25 mm dia of best quality including cost of materials , lead, lift, labour, etc.,complete as directed by department Engineer at site.
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .